Issue when transport request of Text Control

Dear Gurus,
I have some problem when modified Text controls.
Requirement
My customer want to copy item text from Quotation which is use access sequence 9000 to item text in Sale Order
What I do.
1. I go to SPRO -> Sale and Distubution -> Basic Function -> Text Control -> Define Access Sequences For Deermining Texts -> Sales Document -> Item -> Textproceture -> Text ID's in procedure of Sale order Item
2. I input Access squence 9000 to sepecific Text ID and ticked "Refer/Duplicate"
3. I save and I get the Transport Request
4. I create sale order reference Quotation and the result is system copy text.
5. Then, I transport request to Simulation Server.
6. I create sale order reference Quotation but this time system does not copy text
I want to know why problem is occurs. if you have reference document about this issue please tell me.

Hi,
Run the program 'RSTXTRAN' using transaction SE38 and attach the Text object to your TR.
Last time I faced the same problem.
Everything gets transported except Text object.
Hope it will be useful to u.
Revert if not resolved.
Regards
Amit
Edited by: Amit Gupta on May 14, 2009 7:31 AM

Similar Messages

Issue in soap request SAP Host Control

Hi. I use SAP NW 7.4 SP2 and have issue in next request
POST / HTTP/1.1
SOAPAction: ""
Content-Type: text/xml; charset=UTF-8
Content-Length: 559
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:ns0="urn:SAPHostControl">
<SOAP-ENV:Header/>
<SOAP-ENV:Body>
    <ns0:MoveIpAddress>
      <aInterfaceName/>
      <aAddress>IP</aAddress>
      <aAddressFamily/>
      <aTargetHost>IP</aTargetHost>
      <aTargetUser/>
      <aTargetPassword/>
      <aTargetInterfaceName>???</aTargetInterfaceName>
      <aConnectionToTarget>???</aConnectionToTarget>
    </ns0:MoveIpAddress>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
maybe does anyone used this request, what I need write in aTargetInterfaceName && aConnectionToTarget aConnectionToTarget - http, tcp or https don't work
Thank you

Hi,
Run the program 'RSTXTRAN' using transaction SE38 and attach the Text object to your TR.
Last time I faced the same problem.
Everything gets transported except Text object.
Hope it will be useful to u.
Revert if not resolved.
Regards
Amit
Edited by: Amit Gupta on May 14, 2009 7:31 AM

Issues while transporting requests to an upgraded system

Hi all,
There is a development system which is upgraded.
prior to upgradation of this development system , we copied all the abap developments to a temporary system, where developments were done until development system is upgraded.
As of now , we are manually copying the changes done in temporary system to the upgraded development system,
     i.e for ex; Manually copying the code of a program in temporary system to upgraded development system
Instead of manual copying of the developements/changes from Temporary system to development system, can we move the requests directly from
temporary system to development system.
Please let me know ,what are the issues raised while moving requests ( of programs,tables,scripts,smartforms..... e.t.c ) from temporary system to development system
Thanks in advance.

There's a new 'check' that can be done when transporting CRs throughout your landscape. It is the unconditional mode "Ignore Invalid Component Version".
This feature (check the component version) was included with SAP_BASIS 702, so the tp checks the component version of the system where the transport was released (this information is included in the transport) and the component version of the system where the transport is going to be imported.
This component version check feature will check all the components version between source and target system. So before choosing the 'Ignore' option, please try to make sure that the software component version that the objects contained in the request belongs to, should be the same between the systems, to avoid any inconsistencies. It is recommended to transport request in systems which are on the same support level or use the same add-ons.
The component check is a hint that you will import a transport which come from a system which is different from the target system. It only checks the installed add-ons and support packages. This means if you have in the source system installed a add-on which is not present in the target system of the transport you should aware that you import no objects which depends on the add-on which is not present in the target system, the same point belongs also to different support package
releases. This option was implemented to reduce the risk of inconsistencies. If you import the transport please use transport option "ignore invalid component version".
This import option means that transport requests can be imported even if their component version does not match the current component version (including Support Package Level) of the system. This is the case if the component version of the system is either new (the Support Package Level
is higher than that of the export system) or too old (you first have to have imported the Support Packages before you can import the request). You should only use this option if you are sure that the content of the transport request is independent from the component version.
If it is required to avoid this check you could set transport parameter SP_TRANS_SYNC with value OFF and this check will be not performed from tp, but I would recommend to use import option "ignore invalid component version" before you would import the transport.
transport parameter SP_TRANS_SYNC = OFF.
Parameter SP_TRANS_SYNC is delivered ON by default.
This option will avoid the check of the component version.
Some notes regarding this feature:
1581638 - SAP component checks no longer working in TMS
1577714 - Transport requests in Check requirements phase
1650265 - TMS workflow: 'Ignore Invalid Component Version' missing
1742547   Information about component version check in TMS
1756116   TMS Component Check: Fix for excluded component logic

Unable to release transport request because of control program tp

I have create a customized transaction type as a copy of urgent correction SDHF. I am not able to release the transport requests using the action in the toolbox 'Release Transport Request' and I obtain the following error in the log:
could not start transport control program tp
But if I directly execute the task 'Release Transport Request' in the task list, it works.
Another strange thing is that at the beginning both ways worked, but after some days I started to have this problem.
Thanks
Antonello

I did not find any note about this error.
Someone can help me?
Thanks.
Antonello

Issue in Transport Request of ChaRM

I have created a Transport Request made import'd to Q-Sys, Now i need to Make some changes I've set the status to IN-dev & made changes & saved ,also released the transport request, still no changes found, Plz suggest me a remedy?

hello Savithru,
the normal process to import in QSystem your change via charm is to run the action "test transport" when you are "in development" for normal change document (SDMJ). You need to release your task prior to this action.
This action will create a copy of your intial transport and will release it to the import buffer of your Q system. (the initial transport is NOT released). You can see the transport number in your log in your change document.
The actual import in Q needs to be scheduled manually or automatically
Do you see your transport of copy in the import buffer of your Q-System ?
I hope it helps
br Xavier

Issues with transport request

Hi,
I have this situation:
There is a table. And multiple changes have been made in the development system (under multiple transport requests). Now what I want to do is, create just one transport request(to be transported to production) which will club all these changes.
How can I do this? Are there any specific issues that I need to take care of?
Thanks..

Hi one simple way u can do it
In SE01 first u release all the TO that u have created for that table
Now u goto changemode for the table in SE11
then click on save, it will ask another req number
u create new one and save
and transport this TO number to production.
that will work
reward points if helpful
regs
Manas Ranjan Panda

Transport request for Set Control Parameters for Actual Data.

Hi Viewers,
I am unable to create the transport request for the below settings
Controlling->Profit Center Accounting->Basic Settings->Controlling Area Settings->Activate Direct Postings->Set Control Parameters for Actual Data.
Is it possible to move the request through transport request or do we need to create the settings directly in the target system.
Thanks
Aswin.

Hi,
Please read the IMG help at the given path. There are certain profit center accounting settings which cannot be transported directly from the same path, but there is another node in SPRO path for doing this. If possible I will try to locate the path but I am not sure I can post it immediately as I am not having system handy.
thanks,
Kumar

MEssage when Transport request is released

Hello,
I want to get a message, when a transport request is released. But this throws no Event (Object CTREQUEST ) .
Is there any possibility ?
Thanks and best regards
Stefanie

Hi Stefanie,
Go to SE24 and open the class CL_EXITHANDLER, in the method get_instance, put a breakpoint on the statement
CALL METHOD cl_exithandler=>get_class_name_by_interface
Line 14 and release your request and see if the BADI CTS_EXPORT_FEEDBACK is called.
I cannot check this in my system as i don't have any request to release.
Regards
Rajvansh

Issue in transport requests

i am facing problem in transport request in Production Server, changes are not reflecting whereas changes are perfectly reflecting in QA Server.
Regards,
Majid

This is a very generic question, without information we just can guess...
Whats been transported?, Did you check that the changes are been reflected in the objects transported?.... Any logs?...
Not enough information, read the "Rules of Engagement"
Regards
Juan

What to do when transport request reached to DEVK999999

Hi All
What should i do to create workbench or customizing request after it reached to maximum value i.e
DEVK999999.how should i further create request.
Plz help me out.

Hi
>
pranav kumar wrote:
> Is there any sql command to change the transport reuest range in table E07l .i have heard abut that but i dont know exactly about that.
>
> plzz help me out
to change transport number you can follow below procedure:
This is possible via ABAP report RSWBO301. Its documentation is straightforward. Go to transaction sE38, enter RSWBO301, choose documentation display
Program Documentation
This report program searches for a free interval for numbering requests. If the search is successful, you can save the interval. The request numbers are then taken from this interval.
Requirements
For customers the number range interval includes the following areas:
900000-999999 (just numerals)
9A0000-9ZZZZZ for ASCII character set or
9AAAAA-9Z9999 for EBSDIC character set.
You only need to execute this program if you have come to the end of the number range interval, but there are still large gaps in the range that you want to use up.
Example
Why you might get into this situation:
The customer has the SAP system C11. The last number assigned is C11K900115. The customer now imports transport request C11K9ZZZZA from an external SAP system C11 into the customer system C11. The next request created in this system will have the number C11K9ZZZZB.
Procedure
Proceed as follows:
Execute this program in transaction SE38.
Enter the interval limit, for example 5000. You can change this limit at any time.
Choose Execute.
If you entered an interval limit of 5000, the report searches for a free interval with a size of 5000.
If the search was successful, you can save this interval. If not, repeat the search with a smaller interval.
Thanks
Sunny

Issue in Transport Request

Hi,
I am trying to understand how does transport works. I have a issue while moving some SAP BW objects.
Transport X - Containts - A process chain , Transformations, some newly created variants and routines. - Moved to Q.
Now the problem is I dont need to move the Process chains to Production, that means I need to move only transformations, newly created variants and routines.
How do I do that.
If I create another transport Y- just containing the objects apart from process chain and take that TR to Q and then to P will it work. and stop the TR - X in quality.

Hi Abdul,
Thanks, but I know the solution, what I am trying to understand here is the mechanism and any proof like SAP documentation to support it. Please see below post.
Ok, got it, but what I am trying to get here is rather than a hypothesis, a theorem.
Lets see it as a experiment- first creating an ideal conditions-
1) No Human error as in nothing to forget,no wrong sequence or anything.
2) As Mathew said , that seems logical as if I split the class and method it wont work, but what if I always capture the complete object. As in, in the new TR i capture the complete class and the methods again . then what?
I am trying to get here the science behind the transports, everyone has diff experience with TR, I consulted some colleagues, they say - yes if i move the Z TR it will work,
But what exactly happens , when we release the TR. Does the co-files and the data files contains the complete object or just the version change.
If the version change it definitely wont work, if it contains the complete object I don't see any reason of its not working.
Am i clear in my question and concern."

Xcelsius based on BEx query. Issue when transporting from DEV to PRD

Hi all,
I am facing an issue as described below:
I created dashboard based on bex query in Query Browser. Everything is working find in DEV. Then I transport the dashboards to PRD, I also use the override settings to point from BOD-BWD to BOP-BWP, my connection changed accordingly. Everything seems ok. One day when we stop the BOD system. Dashboards in BOP are not working. Then I start BOD, everything is ok then.
The issue I got:
Internal: BOP....
External: BOD.../XcelsiusWebServices.
Is there any chance that dashboard in BOP using the BOD xcelsius web service?
I have resolved this issue by:
- Open the dashboard in BOP, then in each of the query in Query Browser, I clicked edit and click next, next until end.
- Then re-save to BOP, then it is working
For your information, I used BEx query in Query Browser only, not use BIWS.
Dashboard 4.0 SP04
BW 7.3
Does anyone face this issue before? And how you resolved it? Please kindly share with me.
Thanks,
Quan Vo.

Hi Quan,
Found few points regarding this.Please check might help you.
Migration of Dashboards (using Query Panel) on BI 4.0 environment - Business Intelligence (BusinessObjects) - SCN Wiki
Regards,
Javed

Langauage issue -when loading master data text

I have a customer master data attribute and text .
This is master data is customized one. With in function module based on sy-langu it will extract the English,German,French.... customer data
R/3 side -Rsa3 transaction when i logon each logon language it is extracting the correct information with text values based on the logon language.
When I am loading the data for each language it is not loading.It is updating only the english.
I logged on as french ,German loaded data attribute and text also. Still it is not updating in the master data text values with french ,german.
Infopackage selection also I set DE and French.
Master data Infoobject - Text language dependent is marked also.
Advance thanks

Hello smartone,
I'm facing the same problem right now (only getting EN). So maybe we can share some experience.
On help.sap.com I found the following link:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a659be07211d2acb80000e829fbfe/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a659be07211d2acb80000e829fbfe/frameset.htm</a>
Almost at the bottom of the page there is the description about the language vector. The settings made in this vector control the extracted languages. As a standard all installed languages in the system are marked here.
In the following link describes how to change the settings.
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/1e6df8bf2a11d2b437006094b9ea64/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/1e6df8bf2a11d2b437006094b9ea64/frameset.htm</a>
But to be honest, I do not know how to get to the parameters. Otherwise I would have tried to check/change them. Does anyone have an idea?
Regards,
Martin

Issue when exporting data to text file in BI Publisher 10.1.3.4

We are trying to export over 900,000 records to a text file from BI Publisher. The reports keep on running while scheduling. But if we reduce the record limit to 200,000 it works fine. Please help us to resolve this issue. Its really urgent.

How are you doing it? With a template? Need more info to be able to help
Tim

Issue Regarding transport request

Hello,
Can any body let me know
whether the table entries trasnported to Quality Sytem should be in Workbench Request OR Customization request.
Which is the best practise to transport entries in a table which were done using SPRO in enhanceing the customer master data screen by creating a subscren .
thanks

the entries will come under the customising request and the table definition(ZTABLE) will come uner the workbench request.
Check these links
http://help.sap.com/saphelp_nw70/helpdata/en/57/38dd924eb711d182bf0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
Regards
Gopi

Issue when transport request of Text Control

Similar Messages

Maybe you are looking for