Issue with availability check

Hi,
We are creating delivery for stock transfer order using customised transactions via ATP check. During ATP check, the system is indeed creating outbound delivery, but with zero quantity.
I checked the stock in MMBE, it is showing stock. Also in MB5B, the stock was available on posting date. Why the system, then created outbound delivery with zero quantity.
Can anyone please suggest?
Thanks in Advance,
Nisha

Hi Nisha,
Check the following
IMG>>MM>>Purchasing>>PO>>Setup STO>>Define Checking Rule and select the one you are using (Use avail check 02 with checking rule 01)
Next in Assign Delivery type and checking rule check for proper assignmnets for..
Doc Type-Supply Plant-Del Type-Chk rule-check box ticked for Shipment scheduling
Your delivery type should be NL for Intra company STO and NLCC for cross company STO.
Make the ATP check in the STO PO and confirm things working.
Chk n revert
Regards
Shiva

Similar Messages

Problem with availability check due to credit block

Dear Experts,
I am facing a problem with availability check for a sales order which is blocked against credit check
Like, i have a open sales order with mulitiple line items around 10 line items, out of which all the 10 line items have unrestricted stock and got confirmed when availability check has been performed , but we could able to proceed through delivery and billing only for 9 line items. Hence there is 1 line item in the sales order which didn't get delivered. But when we tried to do the availability check the system is confirming the quantity with credit block. But after the sales order has been released thru VKM3 from credit block again the schedule lines are showing confirmed quantiy as "0" .
Credit message observed : " Credit check (maximum percentage for open exceeded)".
An earlier response would be of greater help extension to me , and i shall be greatly obliged to you all.
Thanks & Regards
Krishna.k

Hi,
once confirm actual stock is there for that line item if yes then may b stock blocked by Credit block.Release the stock reserved by credit blocked sales order through back order processing.
Tcode: V_RA
Select sale order want to change the confirmed qty. SAVE.
and again come to VA02 and run availablity chek.
Regards,
anand

Creation of Sale Order for configurable material with availability check.

Hi,
We have a scenario in which the material is configurable. The configurable material (X) has few variants (Ex: X1, X2, X3, X4, X5). While booking the sale order, we use the material number (X).
Further, the material planning is done for the variants X1, X2, X3, X4, X5. The standard variants are planned for production in advance.
1.     While booking the sale order, we want the availability check of the stock (type matching to happen). What needs to be done in configuration?
2.     While booking the sale order, there is a possibility that the configuration selected will not match with any of the standard variants due to some additional requirements of the optional features, in such cases how to link the standard variants to the sale order & create requirement for additional requirements.
Regards,
Umesh

Hi Umesh,
           1.Create material master for configurable material and variants in mm01.
           2.Maintain BOM for the configurable material in CS01
           3. Configur the variant configuration steps
              a. Create charecteristics T.code CT04
              b. Create values and assign classes
              c. assign the values to charecteristics
              d . Maitain dependence T.code CU01
              e.create configuration profile t.code CU41
              f.stimulate the configuration profile.
4. Do the availability check configuration through this path
IMG --> Sales and distribution > Basic functions ,> Availabilty check and Transfer of requirements.
5. Maintain the Availbility check field and MRP views in the material masters other wise you sit with PP people and do that
I hope it will help you
Regards,
Murali.

Sales orders with availability check?

Is there any transaction code to generate list of sales order /open orders with respect to availability check ( with the combination of organizational data)?. will anyone share your expertise pl.

Have you tried with VA05 where you can see tabs like
- Open Order quantity (quantity not yet despatched),
- Confirmed Quantity
- Status of the order (Partially delivered, Being processed etc)
thanks
G. Lakshmipathi

Login Issues with license check

Hi All,
We have had some issues with starting the database after a virus attack on our network. We have now sorted this out with the help of an Oracle DBA. We can now start the database as well as the central instance fine.
But, when our users are trying to login, they are getting the error "Logon not possible (error in license check). I have also tried with the SAP* and DDIC users in 000 client. But no luck.
O/S:    Windows 2000 Server
DB:     Oracle 9i
SAP:   4.7 EE
Can someone help me plz?
Thanks
Vijay

Regarding the error "Logon not possible (error in license check),
Few suggestions:
1. Please copy and paste the output from the following commands:
   -> saplicense -version
   -> saplicense -install trace=2    (this generate dev_slic file)
   -> saplicense -get
   -> saplicense -show
2. DB connect problem... Sometimes this error can occur when there are
connection problems to the central instance. During logon system checks
if a valid license is installed by reading the entries in table MLICHECK.
SAP* will bypass the MLICHECK check. So, sometimes this error can occur when there are connection problems to the central instance (message server). This could be a temporary problem. Please try to restart your SAP servers if this helps.
3. See SAP note 359944, 193800
4. Copy and paste the output of command "R3trans -dx"
5. Check the file /etc/services for missing entries, example like
   sapms<SID> 3600/tcp
   sapdp00    3200/tcp
   sapdp99    3299/tcp
   sapgw00    3300/tcp
   sapgw99    3399/tcp
6. use the message-server-test tool 'lgtst' as per SAP note
64015 to see whether you can connect to the server.
7. can you ping the message server ? check parameter rdisp/mshost, IP
address on host table ?
cheers,
Vincent

Wss3 Issues with user check in files from within excel or word 2010

I have got a user reporting that he is experiencing (and it is getting more and more often) that when a file is checked out in excel or word, he then edit it, followed by clicking check in on the File tab within either excel or word. He then gets error see
image below.
Just wonder if anyone has seen this before? and where do I start...?
i have checked the site collection is about 12 GB in size, there are quite a few subsites in the area where this user is working, there are about 150 subsites, 3 levels... our wss3 version is 12.0.0.4621

Yesterday I just had another user report the similar issue with with office complaining that the file was not checked out therefor upload (check-in) was failed.
Please see the version and build number of MS Office
Forgot to say, we are all on the same release and updates for MS Office as well as IE.

Problem with availability check

I'd be interested in FiOS but when I do an availability check, it says it's found multiple addresses that match what I entered, but none of them are mine! I've tried various ways of entering my address but always get the same result. Anyone else experiencing this? What can I do?

Too less information.
Search notes for "AVAILABILITY_CHECK", sort them by date and check if any notes apply to you. If you can´t find anything open an OSS call. ATP check can be configured in MANY ways.
Markus

Workforce planning- issue with available capacity

Hi All,
I have an issue in workforce planning. I have created a workcentre and have entered the required details in capacity tab to arrive at available capacity. The available capacity for this workcentre is visible in transaction CM01.
I have done the workforce palnning using worcentre view in transaction CMP3, but for some reason I am unable to see the workcentre avaliabile capacity. I only see the distributed total requirements.
Would appreciate any pointers on this.
Regards
Pradeesh

Regarding the availablity of CMP3, it refers the availability of assigned persons rather than the work centers.
Please check the involved person with transaction PA30 using infotype 007
(see details in consultant note 543362).
Kind regards,
Zhenbo

Is anyone else having issues with firefox checking toolbars and add ons every time you log on after upgrading to 10.0.2

I upgraded to the newest Firefox 10.0.2 a few days ago and now every time I log onto the internet with Firefox it says checking tool-bars and addons and loads slowly with my homepage and Firefox page saying thanks for upgrading anyone else having this issue have 2 tool bars that load they are charter and yahoo

Which security software (firewall, anti-virus) do you have?
Some security software has virtualization features that can cause problems by protecting and restoring files in the Firefox profile folder.

Issue with available object

Hi,
I have a WEBi report built on BEx query using BICS connection. The issue which am currently facing is if i add the not-compounded filed from the available objects to the grid, then if i refresh the report then the results are never getting finished its just running.
The issue is identified only with that not-compounded field which is tied with customer Infobject in BW.
Any idea?
thanks,
Vinay

Hi,
I have a WEBi report built on BEx query using BICS connection. The issue which am currently facing is if i add the not-compounded filed from the available objects to the grid, then if i refresh the report then the results are never getting finished its just running.
The issue is identified only with that not-compounded field which is tied with customer Infobject in BW.
Any idea?
thanks,
Vinay

Issue with available space on an iPad Mini

My iPad Mini has less than 1GB of apps on it, however on the sync page it shows 5GB of apps. I am guessing I need to restore the iPad? If I restore from an iCloud backup, what are the odds that the problem will remain? Any suggestions on what may be going on? BTW, this mini syncs to a Toshiba PC.

Yes - you can take it into the store so they can take a look at it. Not sure about the exchange part. I'm thinking that if they determine what the issue is right then and there, that they would replace it if they have a replacement available. I only did the exchange by mail because the problem was diagnosed as "unfixable" by the Apple Support person that I was working with on the phone. (also, my Apple Store is over an hour away, so was easier by mail - the replacement and return were all done at no cost to me....)
Tell your Sis not to feel bad. As you have already pointed out, Apple products are very reliable, well-made products. They are, however, full of lots of electronics, chips, wires, etc. Considering the complex makeup of these little miracles of wonderment, it shouldn't be surprising that once in a blue moon, something is just not going to be perfect. No one's fault, just the nature of the beast....all will be well in the end, most assuredly!
Best of luck, and wishing you many happy iPad days to come!
Cheers,
GB

Incomprehensible - BT system issue with available ...

I am lossing the will to live having to deal with BT, who seem completely unable to comprehend a simple problem!!!
BT Systems seemed to have corrupted my account, their systems tell them that my max inifinity speed is 29mb on a new 80mb cabinet & exchange, when I am less than 100m from the street cabinet. All of my neighbours are correct at 80mb and achieving this speed. Whilst BT systems tell them 29mb, my line test (http://www.speedtest.btwholesale.com/) of the installed service at both my house and at the cabinet (openreach engineer) are at 40mb, even though I ordered the 80mb package. The Openreach engineer confirmed that the reason I am getting 40mb and not 80mb is because BT ordered a 40mb line not the 80mb line. BT are unable to change the line speed and no one seems willing to believe and then finally able to deal with this issue.
How on earth do I get through this issue? This has been going on for 2 months and I must have spent over 10hours on the phone to different people at BT.
Please someone help!!!!
Ian.

Can you run this checker and post back a screen shot of the results
http://www.dslchecker.bt.com/adsl/adslchecker.welcome
and use this speed tester then carry out the further diagnostics and post back a screen shot of all the results including your IP profile for up and down. This will show if you are on Infinity 1 or Infinity 2. This test must be done with a wired connection.
http://speedtest.btwholesale.com/
If you have a Homehub 5 can you also post the stats from 1-12 by logging onto the homehub management pages then troubleshooting > helpdesk. http://bthomehub.home/

GATP - Allocation with Availability Check

Friends,
Need help setting up the below scenario in GATP :
Product Allocation for Product A is 100 per day and allocated only in single bucket (rest of the buckets zero qty). Order comes in for 150 qty. If I check allocation first then only 100 will be confirmed as there are no more allocations i future/past buckets. So, the rest of the qty should be confirmed after 10 days (assuming that the RLT is 10 days).
So, to set up this scenario in check instructions, I would let allocation be first step and product availability next step and in check control I have confirmation at end of checking horizon. But I am not getting the expected result. Please help me!!!!
Thanks
Sapper

Sapper,
Many companies set up their businesses such that the original order entry results in an unconfirmed order. Allocation IN PARTICULAR is designed to exclude certain customers from receiving any confirmation at all.
So, let us look at your requirement. It seems that you have an allocation, based on some business rules (customers? region? market segment?). Allocation is designed for situations where marketplace demand exceeds supply, and you wish to limit sales order confirmation to some predefined quantities. The normal reason is to stop certain customers from buying all of your product, but instead divide your output up such that a previously defined grouping of customers can each get their fair share.
Now you say, "if the customer has an allocation and I have stock, I want to confirm against the stock. If the customer does not have allocation, then I want the order to confirm to some fixed date in the future." Please confirm if this is your requirement.
Allocation is not designed for this purpose. I have low confidence that it can be tortured into meeting this requirement. if you are unwilling to create an allocation for this customer at lead time to cover his excess requirements.
I don't really know all of your requirements, but I believe one solution that may work is to use SD Scheduling agreements. (you don't need APO for this, BTW) . You enter a scheduling agreement according to the amount you wish to build for this customer. You build product according to the customer's SA, and ship accordingly. If he attempts to overbuy, then his order is treated the same way you treat any other order that has inadequate supply, typically confirms to lead time.
Rgds,
DB49

Issue With select Check box in advance datagrid

Hi
       i am using advance datagrid having hierarichal data.There is one column having checkbox and one header renderer(CheckBox) on top giving functionality of select all.when i clicked on select all checkbox , all the checkboxes in that column not showing checked unless i collapse or expand the heirarichal data or scroll the advance data grid,similar is the case with unselect checkbox.however internally values are selected and unselected as per functionality but checkboxes are not show checked/unchecked in first go.i have tried following things to refersh the data but nothing worked.
refreshing the arrayCollection and then calling invalidateList() on the grid.
IHierarchicalCollectionView(adg.dataProvider).refresh();
so please guide me .
Thanks in advance
Vineet Osho

we have a field to bind the checkbox selected status, such as 'selected', when the data['selected'] = true means the checkbox is checked, otherwise is unchecked
the itemrenderer code:
public class CheckBoxADGItemRenderer extends CenteredCheckBox
                    public function CheckBoxADGItemRenderer()
                              super();
                    override public function set data(value:Object):void
                              super.data = value;
                              invalidateProperties();
                    override protected function commitProperties():void
                              selected = data['selected'];
                              super.commitProperties();
when click the header renderer checkbox, change the collection data 'selected' field, when checked, data['selected'] = true;
then invalidate the check column properties,
eg:
private function invalidateCheckColumnProperties():void
                              var i:int = 0;
                              var n:int = listItems.length;
                              var instance:IInvalidating;
                              for (i = 0; i < n; i++)
                                        instance = listItems[i][0] as IInvalidating;
                                        if (instance)
                                                  instance.invalidateProperties();
Hope help for your.
Huang

Restoring one system-wide dictionary (issue with spell checking)

Hello all,
For some reason, spell checking is behaving badly: it won't spell check German correctly anymore, even though it is set on “Multilingual”. English is alright, so I suspect my German dictionary got corrupt.
My questions are:
1- Will installing the 10.5.7 update resolve the issue?
2- Where can I find the system-wide dictionaries used for spell-checking by OS X?
3- Where can I download these dictionaries?
I hope a clean install is not required just to get one dictionary/spellcheck file back…
Thanks very much all!

it won't spell check German correctly anymore, even though it is set on “Multilingual”.
How about when you set it to Deutsch?
2- Where can I find the system-wide dictionaries used for spell-checking by OS X?
3- Where can I download these dictionaries?
You can't find them or download them.
I hope a clean install is not required just to get one dictionary/spellcheck file back…
Maybe. You could also install CocoAspell and add a German dictionary from its selection.
http://cocoaspell.leuski.net/

Issue with availability check

Similar Messages

Maybe you are looking for