Issues distributing packages and receiving Win32 Error = 0

Within the last month or so, we've been experiencing issues distributing various packages to our DP's. There doesn't seem to be any rhyme or reason to it; it can be any combination of packages and DP's.
We've noticed that just before the Win32 error occurs, the following 4 lines usually precede the error:
UpdateStagedFile failed; 0x80070040
UpdateStagedFolderRdc failed; 0x80070040
UpdateStagedFolderRdc failed; 0x80070040
UpdateStagedFolderRdcW failed; 0x80070040
We've had an open ticket with MS for over a week now, but there hasn't been any progress.
Any light you guys could shed on this would be greatly appreciated!

This is a known issue for SCCM 2012. A official fix will be released in the near future. If you want to test instantly, contact CSS to open a case to get a test fix.
There is a KB for this issue (English not available currently)
http://support.microsoft.com/kb/2927111/fr
Juke Chou
TechNet Community Support

Similar Messages

BEA-149218 Attempted to report an exception to DRS and received an error

I am using Weblogic81 SP2. I have two Managed servers. I am trying to
start a managed server through Node Manager and I get the following
error
####<Nov 20, 2003 10:09:14 AM EST> <Error> <Deployer> <iolaus>
<iolaus110> <ExecuteThread: '4' for queue: 'weblogic.kernel.System'>
<<WLS Kernel>> <> <BEA-149218> <Attempted to report an exception to DRS
and received an error.
NotificationException due to underlying exception
weblogic.drs.internal.InvalidStateException: Slave update for
DataIdentifier DataIdentfierID: 1 received a commitFailed() call - this
can only be called if update is in AwaitingCommitCompletion state
at
weblogic.drs.internal.statemachines.slave.SlaveState.commitFailed(SlaveState.java:89)
at
weblogic.drs.internal.DataReplicationService.notifyCommitFailure(DataReplicationService.java:375)
at
weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:581)
at
weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:500)
at
weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Does anybody know a solution or a work around please?
Dharmesh

Not sure if this applies to all instances, but in our case this issue was caused by an incorrect startup script for the admin node. We had neglected to include the -server flag. Adding the flag resolved the issue for us.

I tried to update my cc and received the error code: A12E1

I tried to update my cc and received the error code: A12E1

Hi Samson,
Welcome to the Community!
Please perform the below steps:
1) Reboot the computer.
2) If error still persist, Rename the OOBE folder to OOBE OLD from
Mac: MAC HD/Library/Application Support/Adobe
Windows: C:\Program Files (x86)\Common Files\Adobe and
C:\Users\(UserName)\AppData\Local\Adobe
3) Download Creative cloud once again and try launching.
4) If you still faces an issue then Quit/End the AAM notifier process
Windows:
Press Ctrl Alt Delete
Start Task Manager
Click the 'processes' tab and check if you have AAMNotifier running
If so, click End Task
Mac:
Go to Spotlight (magnifying glass at top right on your screen)
Type Activity Monitor
Press Return to open Activity Monitor
Check in the Activity monitor for AAMNotifier
Quit that process if you find it
Thanks!
Ankit

My 30 day Photoshop trial finished yesterday. I purchased the $9.99 per month Photoshop package and received an email saying "Thank you for your payment etc" But when I go to open PS it still says "the trial has expired.."

My 30 day Photoshop trial finished yesterday. I purchased the $9.99 per month Photoshop package and received an email saying "Thank you for your payment etc" But when I go to open PS it still says "the trial has expired.." Is it supposed to work automatically or is there a step I'm missing?

1. Close all the Adobe Applications. Log-out from creative.adobe.com and re-login.
2. Once you launch the software and when you get the error saying the the trial version has expired, you will have an option saying "License this software".
3. Select this option and enter your credentials and click next.
Nancy O.

Unable to receive e-mails & Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.

Everything good until yesterday, Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.
I am connected so I don't know why it is "offline". I am able to "send emails" but not receiving.

Hi,
What’s your Outlook account? Exchange account or some other Internet email accounts?
This issue is usually happened when the Microsoft Outlook Hotmail Connector account is syncing changes to a folder and cannot find the folder in the Outlook client. Please try the following KB to check it:
http://support.microsoft.com/kb/2231628
If the issue persists, please create a new Outlook profile and add the email account to have a try:
http://support.microsoft.com/kb/829918
Regards,
Winnie Liang
TechNet Community Support

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detected

I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause.

Installed iTunes 64 on Windows 7 (home) HP and received this error message. The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Please help.

I installed iTunes 64 on a Windows 7 (Home) HP Pavilion and received this error message. the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Please help!

The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

"Tried to Download_Adobe_Premiere_Elements_13_Mac 2" and received this error message can't be opened because the identity of the developer cannot be confirmed.

“Tried to Download_Adobe_Premiere_Elements_13_Mac 2” and received this error message can’t be opened because the identity of the developer cannot be confirmed.

That's Apple OS X's Gatekeeper feature kicking in. Nothing to do with Adobe.
How to open apps from an unidentified developer in OS X Mountain Lion | iMore

I updated to IOS 6 and received an error message after completing. Now my phone is in restore mode. Is there a way around restoring my phone completely?

I updated to IOS 6 and received an error message after completing. Now my phone is in restore mode. Is there a way around restoring my phone completely?

Once the Device is asking to be Restored with iTunes... it is too late to save anything...
To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808

Tried to setup ePrint on printer and received Register Error, Please Upgrade Product

I was trying to setup the ePrint web service on a HP Photosmart Plus e-All-in-One B210a and whenever i tried to set it up on the printer I would receive "Register Error - Please upgrade product". I would also try to get the printer to update through the web interface and I wasn't having any luck. I'm wondering what I can do to get the printer to either update itself and get the ePrint enabled or if I can do it from the HP website?
Thank You,
Trevor Bensen

I hope you are doing well and sorry to learn you are having this issue
Can you share what is the complete printer model as well as this;
Operating System (including service pack revision)
Connection Method - USB, Hardwired LAN, Wireless?
Error messages - on printer screen and/or computer, any blinking light patterns.
I will do my best to help you;
Regards;
RobertoR
And remember . . .
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

HT3728 Firmware Update 7.6.4 Error: I uploaded the 7.6.4 firmware update today, and received an error message as it was finalising. As I am using my Time Capsule as the Airport router, I am now no longer able to access it to try to resolve the problem. He

Dear Support Team,
I agreed to the Time Capsule 7.6.4 update today, but as it was completing, I received an error. It said to close the page and try again.
I use my Time Capsule as my Airport wireless router and now can't access the Time Capsule to re-upload the Firmware update.
Has anyone else had this happen?
Is there a way to resolve the problem?
Do I need to hardwire the Time Capsule? Then what?
Would really appreciate some help!!
Thanks everyone.

Factory reset the TC and it should come back to life.
The Factory Reset.
Power down the TC.
Hold in reset. and keep holding it in. Be Gentle! It is a tiny surface mount switch with a plastic lever.. Attempting to push it out the other side of the TC will not make the switch turn on better.
(I fix TC and have several reset levers bent over and jammed or broken off).
Power on the TC.. remember with the reset held in.. this needs three arms.. a friend or power switch you can get to with your feet..
Keep holding in reset for about 10sec until the front LED flashes rapidly.
Release reset and wait .. the boot will be slow as it deletes previous setting.. only from router side and pulls out the factory defaults. No files are deleted on the hard disk.. but the name of the TC may change.
As a rule .. wireless is not reliable enough for mission critical work like firmware upgrades.. (Heck I don't think it is reliable enough for backups).
Apple doesn't insist on wired connections.. some other manufacturers do.. and post warnings not to attempt it over wireless. Warnings inevitably read after the failed firmware update btw.. so perhaps Apple have decided to just save themselves the hassle.
I believe it is just good practice to use ethernet for any time that sitting on a branch.. whilst sawing it off (ie failure will kill any future access).. means you always use ethernet for any setting up of a wireless router.. but you see I am old.. with grey/white hair.. and too many dead modems and routers around me.

Trying to download and install Photoshop Elements and Premium on Surface Pro 3 from the link and receiving an error - anyone know of a resolution?

I have a Surface Pro 3 and just purchased the download link for Photoshop Elements (newest one) from Adobe. I've tried downloading several times and in 64 and 32 bit types, but have only made it as far as the install before receiving an error. Anyone else have this problem and know of a solution?

Hi Jeff -
I tried chatting with someone earlier today, but they ended the session (I think accidentally?) before it was resolved. My error is below. Now chat seems to be closed - although I thought it was open 24/7, so I can't try that again. This is the most frustrating support experience I've ever had. I just want to access and start using the products I purchased Friday. I would be so happy if someone would just help fix this. I am not computer inept, but cannot figure out why the download is failing.
The guy on chat that was helping me before getting cut off had me run a SCANNOW system scan, but that's where the session unexpectedly ended.
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
ERROR: This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.
ERROR: System check returned with error : 6

I updated my PC running windows XP with itunes 11.4.1 and received numerous errors.

I updated my PC running windows XP with itunes 11.4.1. Had to install manually. After doing this I received an error message 'mobile me services can't be located'. Went to check icloud and icloud won't open because procedure entry point could not be located. Rebooted and get entry point error on reboot.
What is the fix?

For all Windows OS to fix this perform the following.
1. Go to Control Panel
2. Remove previous version of iTunes
3. Remove Apple Update
4. Remove Bonjour
5. Remove any other affiliated iTunes download.
6. Return to Apple >> Download iTunes may indicate it will fail to download but reattempt it will download,
7. Once downloaded it may download as (iTunessetup_exe)
8. Right click on the download and change the file extension to a .exe
9. Install should be successful.
I performed all the steps and my iTunes works fine.

ICal import of .ics file and receive alarms error

I receive an error import failed, items cannot be deleted from alarms. This only happens every so often. How can I resolve?

Hi,
Where do the .ics files come from? I believe iCal during event import scans the file for alarms it considers unsafe (some file action alarms etc.), it is probably an issue of it not being able to remove one of these if the .ics file is not formatted correctly.
When this happens is there any related information in your Console output (Applications > Utilities > Console). There should be something there that may indicate why it's happening.
John M

I was trying to upgrade my iPhone 45 to 5.0.1 OS and received an error, "could not update due to firmware file not compatible". I have Windows PC

No success upgrading iPhone to iOS 5.0.1. Received an error, "could not update due to firmware file not compatible". I have a Windows pc. Help??

Check that and also their is a windows update. Update and try again. email me if you have the same problem I'd be happy to keep helping you with this problem
< Email Edited By Host >

Issues distributing packages and receiving Win32 Error = 0

Similar Messages

Maybe you are looking for