Issues in Conveyance Allowance amount in Exemption U/S 10

New issues rise Now....
For New (mid month) joinee at the first month Exemption U/S 10 is calculated based on the Conveyance Allowance amount *12 months (or no. of remaining months for financial yr end), but in my client income tax Exemption U/S 10 based on the actual salary (not earned salary) from the first month onwards.
For example :
Employee X,
Joined date 15.08.2011,
Conveyance Allowance = 800 INR. Earned Conveyance Allowance for 15 days = 400 INR.
While Start Payroll for the period 5th (August) 2011. The WT /130 Exemption U/S 10 = 3,200 (400*8). Based on this Conveyance Allowance The Exemption U/S 10 calculated, But I want to calculated the Exemption U/S 10 at first month (august 2011) based on follows,
August month earned Conveyance Allowance = 400 INR + Actual Conveyance Allowance per month =800*7 =5,600.
Exemption U/S 10 = 6,000 INR.
Please give me some solution
Thanks and regards
Mohan .V
Edited by: mohantamilan on Sep 23, 2011 5:27 PM

Hi,
I think for your earlier thread someone had replied that in the 1st month your calculations will be as per the actual received amounts for mid month joinees,however when you run the second payroll for this employee the system shall consider full attendance and Conveyance shall be 800 x remaining months + the already populated 400 in RT Tables.
After you run the first Payroll live you can check the 2nd payroll with simulation may be this will clear your doubt.
Salil

Similar Messages

  • HT200020 I did the fix but it didn't fix the issue.  It allows me to create the script but when it runs it will not add the user account.

    I did the fix but it didn't fix the issue.  It allows me to create the script but when it runs it will not add the user account.

    Here is all the same setting aside from the user info being created.
    https://www.dropbox.com/s/kkxmhls3bfs6ns3/Apple%20Support%20Installer%20Script.p kg

  • Finder issues when copying large amount of files to external drive

    When copying large amount of data over firewire 800, finder gives me an error that a file is in use and locks the drive up. I have to force eject. When I reopen the drive, there are a bunch of 0kb files sitting in the directory that did not get copied over. This is happens on multiple drives. I've attached a screen shot of what things look like when I reopen the drive after forcing an eject. Sometime I have to relaunch finder to get back up and running correctly. I've repaired permissions for what it's worth.
    10.6.8, by the way, 2.93 12-core, 48gb of ram, fully up to date. This has been happening for a long time, just now trying to find a solution

    Scott Oliphant wrote:
    iomega, lacie, 500GB, 1TB, etc, seems to be drive independent. I've formatted and started over with several of the drives and same thing. If I copy the files over in smaller chunks (say, 70GB) as opposed to 600GB, the problem does not happen. It's like finder is holding on to some of the info when it puts it's "ghost" on the destination drive before it's copied over and keeping the file locked when it tries to write over it.
    This may be a stretch since I have no experience with iomega and no recent experience with LaCie drives, but the different results if transfers are large or small may be a tip-off.
    I ran into something similar with Seagate GoFlex drives and the problem was heat. Virtually none of these drives are ventilated properly (i.e, no fans and not much, if any, air flow) and with extended use, they get really hot and start to generate errors. Seagate's solution is to shut the drive down when not actually in use, which doesn't always play nice with Macs. Your drives may use a different technique for temperature control, or maybe none at all. Relatively small data transfers will allow the drives to recover; very large transfers won't, and to make things worse, as the drive heats up, the transfer rate will often slow down because of the errors. That can be seen if you leave Activity Monitor open and watch the transfer rate over time (a method which Seagate tech support said was worthless because Activity Monitor was unreliable and GoFlex drives had no heat problem).
    If that's what's wrong, there really isn't any solution except using the smaller chunks of data which you've found works.

  • Conference Room issue, double bookings allowed even though AllowConflicts is set to False

    Hi. I used ADsi Edit to completely delete/remove my public folders database. I now run Get-PublicFolderDatabase and it doesn't find one, so I think I have completely removed it. My issue is that all my conference  rooms are now allowing double bookings
    even though AllowConflicts is set to False. I'm pretty sure I have jacked this up due to deleting the public folder database. What should I do to correct this? Thanks. John

    Hi John
    Check if this helps
    http://social.technet.microsoft.com/Forums/exchange/en-US/c812fb70-46f7-4654-b241-6a1fb13e1907/meeting-rooms-get-double-booked-regardless-of-settings?forum=exchangesvrgenerallegacy

  • Garnishabl Amount - Non exempt and Disposable net

    Hi all ,
    Can any please explain me in detail or forward me suitable material where I can gain enough knowledge on
    this Garnishable amount using the Disposable net and Non exempt amounts.
    Can anyone explain me with an example how we do the config for Disposable amount and Non exempt amount.
    Thanks.
    Edited by: Daniel Ben on Feb 28, 2008 5:57 PM

    Adjusting the disposable net is done with processing class 59. 
    The following are valid values:     
    '1' Transfer to disposable net with same sign
    ’2' Transfer to disposable net with sign reversed
    ‘3' Completely non-exempt, used for non-exempt garnishment refund wage types
    ‘4' Used for garnishments, used for exempt garnishment refund wage types
    Processing class 60 determines whether the garnishment wage type should be saved in the results table.
    The disposable net is the basis of calculation for garnishable amounts. 
    Disposable net is determined by values ‘1' and ‘2'. 
    If  you need to create your own model to adjust disposable net, check the value of processing class 59 after copying your wage type(s) and adjust the value accordingly. 
    An Adjustment Model determines how the disposable net is to be adjusted to fit your company's requirements.
    Within the Non-Exempt Amount section, you can define the different ways of determining the garnishable amount and how it is calculated .
    The garnishable amount can be determine using the following:          
    Levy -  You can indicate the exempt amount for a levy for each levy form.  This is done by indicating for each form the number of filing status, exemptions, pay period, validity dates and the exempt amount.
    Special Rules - Special rules for determining the garnishable amount can be stored.  A special rule is used in cases where a model is not able to be used.
    Federal Minimum Wage - You can indicate the minimum wage rate that is used in determining the garnishable amount in accordance with the Federal Minimum Wage.
    The Model Non-Exempt is used to determine the garnishable amount.  Here you can specify whether the minimum is exempt or non-exempt, a percentage or an amount, the federal minimum wage, and a Levy Form or Special Rule, if it applies.
    Once a Model Non-Exempt is created, it is then attached to the Rule Non-Exempt to calculate the garnishable amount.

  • HT3204 new ipod touch. can access iTunes store. cannot create iTunes ID. get error "could not complete iTunes request. unknown error occured (-1202)".Ipod updated to latest issue,firewall exception allowed.SSL 3.0 & TSL 1.0 ok. Running windows Vista. Help

    New ipod touch 32gb. Can access iTune store.Can sample music selection. Completed latest update for ipod Can't make any purchases. Get error "could not complete your iTunes store request. An unknown error occured  (-1202)". security SSL 3.0 & TSL 1.0 OK. Firewall enabled for iTunes. ???

    laneymenion wrote:
    Using Proxy: Yes
    HTTP Proxy: 192.168.100.15:80
    Change the Using Proxy to No
    Have you allowed itunes and itunes helper in your security software firewall?

  • Powerbook g4 connectivity issues. B allowed?

    Other than this my airport 802.11n is going rather well. I own a powerbook g4 that can not connect to my airport extreme 802.11n. Of course while other (newer) laptops in the house have an "n" network mine only has a "b" one. Currently the airport is set on a radio mode of "802.11n (802.11a compatible)" would changing this to a "802.11n (802.11b/g compatible)" or perhaps another radio mode allow my laptop on the network? or would this either do nothing or ruin the network. If so could anyone suggest another reason my powerbook g4 is not allowed on
    thanks in advance, charlie

    I too have the AE 1G and I use the "802.11n (802.11b/g compatible)" wireless mode setting. My PBG4 (Ti) works fine with 802.11b as does an older PBG3 Lombard with an 802.11b wireless card. Try that setting.
    Is it possible that you have MAC address filtering on and forgot to add the MAC address to the table or entered it in error?
    Make sure the password and security settings are correct. An error in security setup may appear as an inability to connect.
    There have been times when the two laptops got stuck with a local IP address assignment because of a configuration error.
    Have you ever taken the PBG4 to a public access area and been connected? If not, you might try it to make sure everything works.

  • Power BI performance issue when load large amount of data from database

    I need to load data set from my database, which have large amount of data, it will take so many time to initialize data before I can build report, is there any good way to process large amount of data for PowerBI? As I know many people analysis data based
    on PowerBI, is there any suggestion for loading large amount of data from database?
    Thanks a lot for help

    Hi Ruixue,
    We have made significant performance improvements to Data Load in the February update for the Power BI Designer:
    http://blogs.msdn.com/b/powerbi/archive/2015/02/19/6-new-updates-for-the-power-bi-preview-february-2015.aspx
    Would you be able to try again and let us know if it's still slow? With the latest improvements, it should take between half and one third of the time that it used to.
    Thanks,
    M.

  • I forgot my security answers and apple support sent me an email to fix the issue but only allowed me to change my password. I still cannot change security questions.

    I forgot my security questions and went threw Apple Support to change the answers. I was sent an email to change my password but still cannot change my security questions, how can I change my security questions?

    Alternatives for Help Resetting Security Questions and/or Rescue Mail
         1. If you have a valid rescue email address, then use this procedure:
             Rescue email address and how to reset Apple ID security questions.
         2. Fill out and submit this form. Select the topic, Account Security. You must
             have a Rescue Email to use this option.
         3. This is the only option if you do not already have a valid Rescue Email.
             These are telephone numbers for contacting Apple Support in your country.
             Apple ID- Contacting Apple for help with Apple ID account security. Select
             the appropriate country and call. Ask to speak to the Account Security Team.
         4. Account security issues almost always require you to speak directly to an
             Apple representative to securely establish your identity as the account holder.
             You can set it up so that Apple calls you, either immediately or at a time
             convenient to you.
                1. Go to www.apple.com/support.
                2. Choose Contact Support and click Contact Us.
                3. Choose Other Apple ID Topics and choose the appropriate topic for
                    your issue.
                4. Follow the onscreen instructions.
             Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    Your Apple ID: Manage My Apple ID.
                            Apple ID- All about Apple ID security questions.

  • Authorization issue won't allow me to read books on Kobo

    I just bought 2 new books from Kobo books.
    I loaded them on Adobe Digital Editions and transferred them onto my Kobo.
    However on my kobo, I cannot open the books its says that I am not authorized to view them. But both my Kobo and computer say they are authorized under the exact same email address (the same it has always been authorized under) and I tried deauthorizing and reauthorizing both, unplugging and replugging my kobo, to no avail.
    Someone please help as I refuse to waste the $30 I spent buying these books.

    Yes I can open the books on ADE and read them. When transferred to my Kobo, instead of showing a thumbnail of the book's cover I see a black rectangle and when I click it says "Oops! This document couldn't be opened. This document is protected by AD Rights Management (DRM) and is not currently authorized for use with your Adobe ID. Please sign-in with the authorized Adobe ID and try again."

  • Income tax issue for mid month joinees

    Issue 2:
    For New (mid month) joinee at the first month gross salary is calculated based on the earned salary amount *12 months (or no. of remaining months for financial yr end), but in my client income tax deducted based on the actual salary (not earned salary) from the first month onwards.
    For example :
    Employee X,
    Joined date 15.08.2011,
    Actual salary = 1,00,000 INR.  Earned salary for 15 days = 50,000 INR.
    While Start Payroll for the period 5th (August) 2011. The WT /416 Gross salary = 4,00,000 (50000*8). Based on this gross salary income tax calculated, But I want to calculated the gross at first month (august 2011) based on follows,
    Gross salary : August month earned salary = 50,000 + Actual salary per month =1,00,000*7 =7,00,000.
    Gross salary = 7,50,000 INR.
    Please give me some solution
    Thanks and regards
    Mohan .V

    Hi Param Dayal,
    New issues rise Now....
    For New (mid month) joinee at the first month Exemption U/S 10 is calculated based on the Conveyance Allowance amount *12 months (or no. of remaining months for financial yr end), but in my client income tax Exemption U/S 10 based on the actual salary (not earned salary) from the first month onwards.
    For example :
    Employee X,
    Joined date 15.08.2011,
    Conveyance Allowance = 800 INR. Earned Conveyance Allowance for 15 days = 400 INR.
    While Start Payroll for the period 5th (August) 2011. The WT /130 Exemption U/S 10 = 3,200 (400*8). Based on this Conveyance Allowance The Exemption U/S 10 calculated, But I want to calculated the Exemption U/S 10 at first month (august 2011) based on follows,
    August month earned Conveyance Allowance = 400 INR + Actual Conveyance Allowance per month =800*7 =5,600.
    Exemption U/S 10 = 6,000 INR.
    Please give me some solution
    Thanks and regards
    Mohan .V
    Edited by: mohantamilan on Sep 26, 2011 2:52 PM

  • Issue on Projected Income Tax (Payroll India)

    Hi Experts
    We have upgraded the system with SP_HR Component patch level 64 and configured SAP Note 1568264.
    We have an issues on Projected Income Tax.
    Scenario :
    Monthly sal : 25000/- and paid the same to employee in Apr, May 11.
    In the month of June employee has LOP for 2 days and paid 22000/- against June 11.
    Now system is calculating projected IT based on 22000/- for the remaining months i.e., 22000*10= 2,20,000/-.
    Showing projected income tax as 2,20,000+50000 = 2,70,000/- (should be 3,00,000/-)
    Please suggest the possible ways to resolve this.
    Appreciate your help.
    Thanks
    Venkat Babu Kurada

    Hi Experts,
    New issues rise Now....
    For New (mid month) joinee at the first month Exemption U/S 10 is calculated based on the Conveyance Allowance amount *12 months (or no. of remaining months for financial yr end), but in my client income tax Exemption U/S 10 based on the actual salary (not earned salary) from the first month onwards.
    For example :
    Employee X,
    Joined date 15.08.2011,
    Conveyance Allowance = 800 INR. Earned Conveyance Allowance for 15 days = 400 INR.
    While Start Payroll for the period 5th (August) 2011. The WT /130 Exemption U/S 10 = 3,200 (400*8). Based on this Conveyance Allowance The Exemption U/S 10 calculated, But I want to calculated the Exemption U/S 10 at first month (august 2011) based on follows,
    August month earned Conveyance Allowance = 400 INR + Actual Conveyance Allowance per month =800*7 =5,600.
    Exemption U/S 10 = 6,000 INR.
    Please give me some solution
    Thanks and regards
    Mohan .V

  • Net Pay calculation is wrong, allowance wage type is not getting added to net amount..

    Hi Dears,
    We are doing payroll configurations for one of our client in india, Regarding our requirement ,we jus tried in test system, we have written a pcr rule stating 01st feb 2015, new allowance need to paid to employees belonging to L&T1 pa and LT ESG.. Allowance will be percent based on gross pay..allowance percentage differs according to the ESG..
    Before writing the PCR, Allowance percentage has been maintained in T511K.. And have configured as payroll constant ZTST 1 should be calculated with a value 2%.
    i have created a new wage type 9021 allowance wage type and this wage type amount should be automatically generated in payslip based on the pcr i have written while running payroll for an employee.
    EARNINGS                                                       DEDUCTIONS
    l&t basic pay 9000             54838.71                    INCOME TAX
    l&t conveyance 9100            2741.94                   12394.00
    l&t hra           9200               4387.10
    l&t allownace 9021                1239.36
    TOTAL Gross amount          63,207.11              Take Home pay (net pay)  49,573.75
    But the actual net amount should be 50,813.11..Based on the allowance wagetype i have created which is automatically generting using the pcr i have written , is getting calculated in the gross amount..
    but not getting added in net amount .so please help me out guys on how to solve this issue???
    Regards,
    Surya Prabha

    Hi Remi,
    Thanks for your kind reply, yes these values are taken from the remuration statement of a  particular pernr whom am running the payroll..
    i have checked the processing classs and i have maintained 5 and 70 which add this new allowance amount to my net amount.  now the net amount is proper.
    EARNINGS                                                       DEDUCTIONS                   perks/other income/exemptions
    l&t basic pay 9000             54838.71                NCOME TAX                       l&t leave encashment    1239.36
    l&t conveyance 9100         2741.94                   12416.00
    l&t hra           9200               4387.10
    TOTAL Gross amount          61,967.75             Take Home pay (net pay)  50 791.11
      Regards,
    Surya Prabha

  • Car and conveyance Issue

    Hi,
    Car and conveyance allowance for which we have configured for two wheeler perk amount 800 Rs now our client ask us to increase the perk amount from 800 Rs to 1200 Rs how do we change the amount.
    In T7INT9? or some where?
    Regards,
    prasath

    As per standrad
    800 Per month and 9600 Rs per Annum , so 1200 Rs and 14400 Rs per annum is exempted so you are in the right way
    Before going to change please take the advice of the Legal counsel once as this is statutory one

  • Good issue to Production order - Allows it in back posting date

    Dear all,
    Good issue to Production order ( 261 Movement ), allows us to post the component in back dated eventhough stock is not avaible on that date.
    Example - Component stock on date 10.02.2010 = Zero , I made it Good receipt on date 18.02.2010 and now stock is available on date 18.02.2010.
    Now GI to Production it allows the qty on current and back Posting date also , I want control on date with error message. It should not allowed the GI for back date from 18.02.2010.
    Because of this our MB5B report shows the negetive issue qty if i post in back date.
    Waiting for reply
    Thanks and Regards,
    Saurabh

    Hi SAurabh,
    PLease check whether Negative Stock is allowed for the valuation Area (plant).
    GOTO >> SPRO >> MM>> Invetnroy management and physical inventory >> Goods issue/ Transfer Posting >> Allow Negative stock.
    Untick the Negative stock allowed for your valuation area (PLant)
    Regards,
    Pravin

Maybe you are looking for