Issues regarding wifi with NetworkManager

I'm pretty sure you've probably already heard of this, although I had some trouble connecting to wifi via NetworkManager after today's update, the nature of my trouble is that it just couldn't connect, basically, it tried to connect for a few seconds, and then disconnected immediately, so I just temporarily switched to using netctl and wifi-menu until this is fixed, but is anyone else having trouble with NetworkManager concerning their wifi as well? I'm using a Realtek chip, btw.

Hi gdon,
yes, the problem was / is exactly the same. I posted the issue in another section on the forum, because I suspected the hardware as source of the problem first.
(https://bbs.archlinux.org/viewtopic.php?id=192956)
Here is the relevant output of journalctl:
Jan 31 11:52:49 myhostname NetworkManager[416]: <info> (wlp3s0): supplicant interface state: associating -> associated
Jan 31 11:52:49 myhostname NetworkManager[416]: <info> (wlp3s0): supplicant interface state: associated -> 4-way handshake
Jan 31 11:52:49 myhostname NetworkManager[416]: <info> (wlp3s0): supplicant interface state: 4-way handshake -> completed
Jan 31 11:52:49 myhostname NetworkManager[416]: <info> (wlp3s0): Activation: (wifi) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'OpenWrt'.
Jan 31 11:52:49 myhostname NetworkManager[416]: <info> (wlp3s0): Activation: Stage 3 of 5 (IP Configure Start) scheduled.
Jan 31 11:52:49 myhostname NetworkManager[416]: <info> (wlp3s0): Activation: Stage 3 of 5 (IP Configure Start) started...
Jan 31 11:52:49 myhostname NetworkManager[416]: <info> (wlp3s0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 31 11:52:49 myhostname NetworkManager[416]: client_start: assertion 'priv->client_type != 0' failed
Jan 31 11:52:49 myhostname NetworkManager[416]: <info> (wlp3s0): device state change: ip-config -> failed (reason 'dhcp-start-failed') [70 120 15]
Jan 31 11:52:49 myhostname NetworkManager[416]: <info> NetworkManager state is now DISCONNECTED
Jan 31 11:52:49 myhostname NetworkManager[416]: <warn> (wlp3s0): Activation: failed for connection 'OpenWrt'
Jan 31 11:52:49 myhostname NetworkManager[416]: <info> (wlp3s0): Activation: Stage 3 of 5 (IP Configure Start) complete.
Jan 31 11:52:49 myhostname kernel: wlp3s0: deauthenticating from xx:xx:xx:xx:xx:xx by local choice (Reason: 3=DEAUTH_LEAVING)
Jan 31 11:52:49 myhostname NetworkManager[416]: <info> (wlp3s0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 31 11:52:49 myhostname NetworkManager[416]: <info> (wlp3s0): deactivating device (reason 'none') [0]
As you can see, the connection to the wireless network itself is established but then NetworkManager complains about DHCP. I deleted all settings regarding the wireless network before I tried to connect.
This is a really weird behaviour - at least 'dhcp=internal' should work, shouldn't it?
This happens on three different wireless networks. The one that is mentioned in the log file ("OpenWRT") and two other ones (1x 2.4 Ghz, 1x 5Ghz - but this shouldn't be relevant).
Cheers,
Michael
EDIT: Ok, I am completely confused now. I configured NetworkManager to use dhcpcd (with dhcp=dhcpcd) and disabled IPv6 in the NetworkManager configuration ("OpenWRT" network). Effect: This wireless network worked with DHCP. Then I did the same with the 5 Ghz network (which is in fact hosted on the same Access Point using exactly the same settings, except for the frequency and the SSID) and NetworkManager crashed every time I tried to connect. Doesn't make any sense...
Anyhow, I then decided to give the "dhcp=dhclient" option one last try and suddenly it worked. journalctl now shows that NetworkManager is using dhclient to connect to the network and doesn't ignore the setting anymore. What the hell? IPv6 doesn't seem to work, but that's ok for now.
Last edited by mlaml (2015-01-31 11:59:15)

Similar Messages

Have an issue regarding library books. My ereader is validated with Kobo account and Adobe Digital Editions account, but I get an error: 'this document is protected bij DRM and isn't available with your Adobe ID'.

Have an issue regarding library books. My ereader is validated with Kobo account and Adobe Digital Editions account, but I get an error: 'this document is protected bij DRM and isn't available with your Adobe ID'.

same problem for me. I am using abe edition 3 as I don't think 4 can be used with kobo. Book has been downloaded to kobo but it can't be read as it is not authorised.Help please

HT1365 Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

The figures you mention only make sense on your intranet. Are you still using the same wireless router. The verizon one is somewhat limited as far as max wireless-n performace. For one thing it only has a 2.4 radio. I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.

I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now?

BT wifi & BT Wifi with Fon connection issue

in the last 5 days I've had issues connecting to BT Wifi and BT Wifi with Fon. I'm connecting using an iPhone and iPad so when I use the BT Wifi app for logging in it constantly says check details (which are correct) and then it will connect but then log off and won't connect for ages. It will sometimes connect one device but not the other.
When I try connect using the browser page I get a message ' maximum number of sessions reached'.
Has anyone any idea what causes this, what it means and a possible solution?
ps I tried email BT but they don't seem to care as i've not received a reply, thanks BT

Hi Gioabb,
Welcome to the forum.
Can I just check, is this problem happening with several hotspots or just the one?
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Cant open web pages when connected to the internet via Telstra's Pre Paid WiFi has anyone else had the same issues works fine with BigPond WiFi

Cant open web pages when connected to the internet via Telstra's Pre Paid WiFi (this connection is working on other devices) has anyone else had the same issues, works fine with BigPond Wifi

and now, when i tried to check again my network preference below the airport tab is showing a message that
"my airport does not have an IP address and cannot connect to the internet!"
then after seconds it will goes back to the first message that
"airport has the self assigned IP address etc....."
i don't know whats going on now!
airport tab is not showing green color anyway! i'ts always in yellow!
i tried turning it on and off but nothing happen! HEEELLLLPP!!!!

IPad 3 with iOS 6 fails to connect to WiFi with WPA2 and AES - any solutions available?

Hello *,
after upgrading my iPad 3 to iOS 6 it constantly fails to connect to WiFi with WPA2 and AES - hidden or broadcasted SSID - at home and at work because the device does not accept the WPA2 password. This is also the case for my iPhone 4S but both devices did work with WiFi (WPA2 / AES) perfectly with previously installed iOS 5.1.1.
I tried to downgrade to iOS 5.1.1 but it seems to be no longer possible to downgrade for both iPad 3 and iPhone 4S as the certification and signage window for iOS 5.1.1 maybe has been closed by Apple.
Does anyone know about a possible solution to connect to WiFi with WPA2 and AES with iPad 3 / iPhone 4S and iOS 6 upgrade?
Thank you very much for any help and advise.
Best regards from Germany
Matthias

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I am having an issue regarding a placed order via customer service department

I recently relocated to Anchorage Alaska as part of a permanent change of station per the United States Air Force. I was initially located on the East Coast in the lower 48 and at the time of activating my contract I had purchased two separate Iphone 4 devices. I also recently went in to a store in February to purchase a Nexus 7 as well.
Upon arrival in Anchorage I had multiple issues regarding the Iphone 4 devices including being unable to send and receive text messages & imessages, unable to make phone calls, dropped phone calls, unable to utilize GPS, as well as not being able to access general account information and use anything related to web browsing or data usage. It was determined that because the Iphone 4 operates on the 3g network and Verizon does not have a 3g network in Alaska, as a result I was utilizing an extended service network from another carrier. As a result of this I am only able to use my Iphone 4 devices while connected to my wi-fi network while within my home, which is totally unacceptable.
I was not made aware that I would be dealing with this when I moved to Alaska and inquired as the the use of the devices I currently owned prior to purchasing the tablet. I was assured by three separate store employees one of which being a manager that all devices would function at 100% efficiency including the Iphone 4s. In fact I was recently billed 350$ for roaming charges last month, which prompted me to speak with a representative via the online chat regarding the significant increase she said that she was unable to process any sort of credit to the account regardless of what I had been told at a local Verizon store where I purchased the tablet.
As a result of all of these mishaps since arriving here in Alaska I determined I was in need of newer devices that utilize the 4G LTE network currently provided by Verizon in Alaska. I know for a fact that the 4G LTE works great up here because my Nexus 7 tablet runs flawlessly and does not incur roaming charges when utilizing the 4G LTE network.
Yesterday I attempted to contact Verizon through the live chat feature regarding upgrading two of the devices on my account. The live chat representative immediately asked me when my upgrade date was. Upon telling her my upgrade date 9/29/2014 she told me I should contact the customer service department as I might be eligible for an early upgrade. I then proceeded to contact the customer service department using my Iphone 4.
My attempt to speak to anyone in the customer service department resulted in a merry-go-round of being put on hold 6 separate times by two different employees, both of which had me wait for more than an hour while they attempted to speak to a manager to gain approval for an early upgrade. The first rep seemed almost sure she would be able to have my devices upgraded early especially considering the issues I was having regarding service.
The second rep seemed newer and was very dodgy about my questions and was very unwilling to help at first. He even mentioned that I had been a Verizon customer for almost two years, had never missed a single payment and had outstanding account history which should have garnered some sort of importance to the level of my request. But I digress, during this time I was disconnected from the call twice from each separate representative.
Both reps assured me they would call me back, I never did get a call back from either one of those reps and I was becoming very frustrated having waited four hours trying to find some sort of solution to my current predicament.
After waiting an hour for the second representative to call back I grew impatient and contacted the customer service department, was put on hold again, and finally reached a third customer service representative who was able to provide a solution for me.
I explained everything I had been dealing with to Cory ID # V0PAC61, both regarding the phones, the issue of the level of service I was receiving, the dire need for working devices and the multiple times I had been disconnected. I explained to him as a result of these issues I was certainly considering switching to a different provider, a local provider even who could provide me the adequate service that I require for my mobile devices.
I explained to Cory that I had been with Verizon for almost two years, and I had been on a relatives account prior to owning my own Verizon account and had never received this kind of treatment when trying to work towards a simple solution. Cory proceeded to tell me he needed to put me on hold to see if there was anything that could be done regarding the upgrades of the device considering all of the trouble I had been dealing with.
After Cory reconnected with me in the phone call he was able to successfully reach a solution by allowing me to upgrade my devices. We conversed about the options available and I eventually decided to upgrade both Iphone 4 devices to Moto X devices as we determined those would be sufficient for my needs while in Alaska. I also proceeded to add two Otter Box Defender cases to the order so that the devices would have sufficient protection. Cory inquired as to whether or not I would like to purchase insurance for the phones as well and I opted for the $5.00 monthly insurance which including damage and water protection.
Cory explained to me the grand total for the devices which included an activation fee of $35.00 for each device, $49.99 for each Otter Box case, and an additional $50.00 for each device which would be refunded as a rebate upon receipt of the devices and activation, a rebate that I would be required to submit. Cory explained to me that the devices would most likely arrive Tuesday of 6/17 and no later than Wednesday 6/18.
Cory took my shipping information and told me everything was all set and the only thing left to do was to transfer me to the automated service so that I could accept the 2 year agreement for both devices. I thanked him very much, took his name and ID# so that I might leave positive feedback about his exemplary customer service and was then transferred to the automated service.
Once transferred to the automated service I was then prompted to enter both telephone numbers for the devices that would be upgraded, I was then required to accept the new 2 year agreement for both devices and after doing so I was required to end the call. I did so in an orderly fashion and expected a confirmation # to arrive in my email regarding the placed order.
I have never received a confirmation email. I decided to sleep on it and assumed a confirmation email would be sent sometime tomorrow. Nothing has since been received however. I woke up early this morning around 6AM Alaska time to speak to another live chat representative, Bryan, in the billing department who assured me the order was currently processing and verified the order #. I asked him whether or not it was typical for a customer to not receive a confirmation email for an order placed and he said it can sometimes take up to 2-3 business days. He then stated that he had taken note of the issues I was experiencing and told me he would transfer me to the sales department as they would be able to provide more information regarding the shipment of both devices and a confirmation email, as he stated he did not want me to have to wait any longer than necessary to receive said devices.
I was then transferred to Devon in the sales department via the live chat service where I was then required to repeat everything I had said to both Bryan and the other representatives I had spoken too. After a lengthy discussion and repeating everything I have just wrote he told me the order was indeed processing and that he would send a confirmation email in the next 30 minutes.
That was 2 hours ago. It is now 8am Alaska time and I still have not received a confirmation email regarding my order. I was sent an email by Verizon an hour ago stating I had a device to "discover". The email contained no information regarding the shipment of my device, the order confirmation number, or anything regarding my account. The email I received was a typical spam email asking an individual to check out the current available phones and sign up for a new contract.
All I want is a confirmation email to assure that the devices are being sent. I need my phone for work and to communicate with my family in the lower 48. I desperately need to make sure that the device is in fact being sent to the proper address, this is why a confirmation email of the order is so important. I do not care about the shipping speed I just want what I ask to be taken care of for a change. I would hate to sit here unable to determine what the status of my devices are only for the order to be stuck in "processing" limbo and be unable to receive the devices when I was told they would be sent.
I feel I have been given the run around treatment way more than is typically given with any company when an individual is trying to work towards a solution. I have been patient and cordial with everyone I have spoken with, I have not raised my voice or shown stress or anger towards the situation I have only tried my best to work towards a solution with anyone I have spoken too but I am becoming increasingly frustrated with this situation.
Any help regarding this matter would be greatly appreciated. This situation has left a sour taste in my mouth and if the devices were indeed not actually processed in an order, or they were not shipped correctly, or in fact if the order had never existed at all it will only deter me from keeping my Verizon account active and affect my decision to switch to another provider.

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

Gurus,
I am facing an issue regarding SAP TPM IP ( HANA)
I have 3 Infoproviders
Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
Issue is Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
I tried debugging it and found it is trying to read i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated. So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
Can any one help,it would be really help.
Thanks
Ashok

Hello Gregor,
On the launch of planning layout it throws an error message:
Planning is not possible RSCRM_IMP_CORE008.
When I debugged, i got to a point wherein
particular Real Time Planning DSO is
not getting retrieved under the MultiProivder in below class.
Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
returning the real time Info-Provider Name(i.e. Planning DSO)
underlyingthe Multiprovider.
I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
Let me know, if you have any pointers on this topic.
Thanks,
Jomy

How do i let my iphone connect to my computer wifi with usb ?

As the title stated,
How do i let my iphone connect to my computer wifi with USB ?
The reason is because my iPhone 3Gs wifi having some problem. So i have to use a USB cable to connect to my computer and let my iphone to connect to the internet .
If i don't do this i would have to keep on running out & in to my room & my living room.
My iPhone 3Gs allows to connect to the wifi when i am in my living room, but once i enter my room the wifi won't be able any more. So please help me out please people
I'm not sure about why i can't connect to my Ad hoc even it's so near, but i can connect to my router if i am in living rooms.
Regards,

I believe the next time you sync your phone to itune via the cord, you will have to check the box that says sync via wifi and also enable that setting on your iphone.

Payroll issue regarding the Claims - /561 and /563

Hi Payroll Experts,
I have a payroll issue regarding the Claims - /561 and /563 (October PY Run)
When i m runnning the Current month Payroll(October PY Run), Total Earning - total deductions are not matching with Net Pay. later i came to know that the system creates the WT /561 and deducts from the Net Pay.
But as per the Employee Payment Details , there is no recovery required from the employee for the past one year. But even then the system creates the WT /561. and deducts the same from NET Pay.
The followng are the WT details
IN - Period
OCT 2011
     /101 Total gross amount     118,897.00
     /110 Net payments/deductions     76,070.00-
     /550 Statutory net pay     95343
     /551 Stat.net recalc.diff.     37,692.00-
     /552 Stat.net subs.adjustment      37,692.00-
     /559 Bank transfer                                                   34,317.00
     /560 Net pay     37,218.00
     /563 Claim from previous month     5,609.00
FOR Period
Sept- Oct
     /101 Total gross amount     49,213.00
     /110 Net payments/deductions      31,721.00-
     /550 Statutory net pay     41,529.00
     /551 Stat.net recalc.diff.     14,591.00
     /552 Stat.net subs.adjustment     23,101.00-
     /553 Recalc.diff.to last payr.     37,692.00
     /559 Bank transfer                                                   14,591.00
     /560 Net pay     14,591.00
     /561 Claim     5,609.00
I request some body to throw siome light on the same.

Hi Experts,
Thanks for everyone for replying to my query ,
I have a doubt that If you check the WTs /551 and /552 in the IN PRD, the negative sign is coming for both the WTs
Is it correct?
And also, Assume that there may be a master data changes like Bank details and other deduction Wts happened in the month of Aug and now i m going to run the payroll for the month of Nov,
some of the employees having differences in the Net Pay, Eventhough the employee is having sufficient balances.
So how do i handle this issue
IS ther any way to solve this differences?
Please Let me know how to solve this issue.
Thanks

SAP QM Issues regarding follow-up action after Usage Decision

Dear Gurus -
Kindly need your expertise to resolve these issues regarding follow-up action.
1. After taking the UD i need to trigger the follow-up action to send an email with the long text to a group of people. As per standard SAP the email goes to the person taking the UD. Kindly can some one explain what & where do i need to make the changes. Also please let me know what is the customized Email ID table where mail ID's will be stored which fuction module can extract.
2. Can i also use the same functionality for partial lots during inprocess inspection. I need to send an email to a group in case the valuation is rejected for that operation.
Any response is highly appreciated.
Thank You.
Edited by: sunil t on Jan 6, 2010 7:03 PM

Hi
Please go through my recent thread
Incomming Inspection Auto mail if Rejected
Regards
Sujit

Issue regarding consecutive run for an Interface

hi all,
i have an issue regarding an interface
if this Interface is a initial run for the file, you have to populate all the data of the people. That is , unlike other interfaces where we send only the latest record, in this interface we need to send all the records of the employees. in a employee has 10 records with different dates, we will pick up all the records greater than 1999 and pass it. whereas if there is a change in one field, then we will send all the record of that file. And If it is a consecutive run then you have to populate changes only. the following algorithm can help you in this
if intial_run EQ 'X'
transfer IT_FINALDATA to XI.
else
Declare a 2 more internal tables similar to IT_FINALDATA...for our below example let us assume that
         DATA: IT_CLUSTERDATA type standard table of IT_FINALDATA.
         DATA: IT_COMPAREDATA type standard table of IT_FINALDATA.
use the following statement to retrieve the data from cluster and comparing it
        IMPORT IT_CLUSTERDATA TO IT_COMPAREDATA FROM DATABASE indx(zn) ID 'IN_8085'.
        Compare IT_COMPAREDATA with IT_FINALDATA
If sy-subrc = 0.
Means there are no changes, and no output required
Else
Pass the data to XI interface, And store the internal table in the same INDX table, using the following statement
EXPORT IT_FINALDATA to IT_CLUSTERDATA FROM DATABASE indx(zn) ID 'IN_8077'.
Endif.
In this can we deliver the changed data at every single consecutive run.
Please let me know,
Thank Q
Rohini.

This is something where HR Interface Toolbox (PU12) can be very helpful, it will take care of changes from one run to another and you can configure it to send changes only in next run. But, you will need some ABAP in its user exits to restrict the data after 1999, and any other restrictions that you might want.

Can't use private wifi or ethernet but Wifi with F...

Hi
We've had a Homehub3 for two years now with no problems. Last week there was a day's electricity power down locally for maintenance and when the power came back on the internet connection was broken. No wifi or ethernet worked but I could connect fine through all our devices via wifi with FON.
As background at home we have iphones, ipads, macbook and pc laptops connected to the wifi as well as PVR, Xbox and powerline routers plugged in to the ethernet, plus an ethernet cable to connect to laptops where required (for scenarios like this).
BT spent an hour and a half with me trying to resolve this before sending me a replacement Homehub 3. We received this yesterday, plugged it in and connected the various wifi devices. The situation is almost the same except one ipad does connect directly through the private wifi network (the other doesn't), and one iphone also does (again, the other doesn't). Nothing works through ethernet, but again, everything works via wifi with FON.
Obviously we've done lots of rebooting and resetting of hubs and equipment (with delay time before turning back on) but to no avail.
Any suggestions would be widely appreciated but please be aware I'm not particularly technical and a bit of a numpty so basic guidance would be a big help.
Thanks
Jules
Solved!
Go to Solution.

Thanks for the response.
I did the pin in the back/factory reset four times with no joy on the previous hub and deleted all connections. I can give it a try with the new hub that has arrived to see if that makes a difference but as it's a totally different and new hub I don't think that will make a difference as all of the connections were new anyway.
Ethernet made no difference in the past after this. I can try a different cable but the other ethernet cables that connect the Xbox and PVR aren't working either so I don't think the issue is isolated to the cable.
I haven't reset the powerline hubs so can look into that.
I'll try all of the suggestions after work later and post back but as they're all things I've tried and we've got a brand new hub I'm not confident it will make a difference so any alternative suggestions I can try are also very welcome.
Thanks
Jules

Issue regarding to change taxcode in tab Gl-account for T.cod MIR7

Hi Expert,
I have issue regarding Tax code in Tab Gl-account for t.cod MIR7 which come by-default , i wan to change that taxcode based on purchase order number which also have tax code with multiple line item in tab PO Refrence,,i want first taxcode of tab PO Refrence to be copied in first line item of tab GL-account based on po number ,can anyone put a light on this issue with priority..
Regard's,
shaikh khalid.

Hi,
You can clear the old items posted in 28000 with the other leg in suspense / clearing GL Account.
Once the above is done, please post once again to Vendor clearing the suspense / clearing account.
Ensure that the suspense / clearing account does not have any open items.
The lines are transfered to new recon account.
Hope this helps, if yes, please assign points.
Regards,
Sankar

Issues regarding wifi with NetworkManager

Similar Messages

Maybe you are looking for