IT roles not correctly updating assignedBy status in act sync

IDM 8.0 sp5 java 1.5
I have the following issue.
I have a Business role called 'A' which containes IT roles '1' and '2'. (set waveset.roles to [A] via the active sync) works: correctly
The active sync runs and business role 'A' is removed. IT roles '1' and '2' are explicily set to the user for deprovisioning scenario purposes (waveset.roles set to [1,2] via the active sync works: correctly
Active sync is run again and role 'A' is readded and roles '1', and '2' are removed.(Active sync sets waveset.roles to [1,]
works: INCORRECTLY
Result: User shows up with roles A, 1, and 2 (which is correct), but the assignedBy attribute on roles 1 and 2 =null and directlyAssigned=true.
what should happen is that roles A, 1, and 2 are assigned (which is correct), but the assignedBy attribute on roles 1 and 2 =[A] and directlyAssigned=fasle.
anyone else have this issue? Anyone know how to fix this? We are even refreshing the view after we set waveset.roles and nothing happens. Do I need to refresh the rolesInfo or something?
Thanks!!

Hi..You guys are life savers.. if the role was changed in waveset.role, the resources were not getting created but the role was getting changed. Changing waveset.roleInfo solved my problem. Now both the resources and the user is getting updated.
P.S: i added a refreshView after changing the role

Similar Messages

Compliance on content status not correctly updated on CAS

We have a new SCCM 2012 R2 CU1 environment with a CAS and multiple primary sites.
We noticed that the compliance percentage
for some applications are not correctly (50%) updated on the CAS for a site with a primary site server with a DP role and a site system with a DP role. It is shown correctly (100%) on the primary site server.
On the CAS you can see the message "detail will be available when server finishes processing the messages" on the content status asset details for some applications.
We have verified that these applications are distributed. The compliance percentage is corrected if we go to an application on the CAS and redistribute it. It only takes a second to finish. So it looks like a bug on the CAS.
Since we are doing our proactive checks on the CAS, it is important for us that the information is shown correctly. We have rebooted the CAS with no result. Also we have all updates installed. We have not found a solution for this yet.
Is there anyone else with this issue? What can we do to troubleshoot or fix this issue?

Hi ,
As it is related to System Center 2012 Configuration Manager, you can create a new post on the configuration manager forum to ask for more information:
http://social.technet.microsoft.com/Forums/en-US/home?category=systemcenter2012configurationmanager
More experts will assist you, then you will get more information relation to your issue.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Not correct Network schema status [Tcode CN21]

Hi experts,
I am having a problem with transaction CN21: I have to create a network with custom profile, so i follow these steps:
1. lanch Tcode CN21
2. set details of network and WBS
3. Clicking on the green symbol with wich I can select tasks I insert a list of materials that the network requires
4. I select the row and then I click on the "I" bottom (the blue one ) of information to set the schema status
5. I choose from a menu my custom schema status
6. I click on save.
7. I get back a message error that is the one in the title.
Is a standard message that i read in italian, but not in english maybe due to some controls on log-on language, so I can't write here exactly the error text, but translated should be like the one in the title
I am sure that is a customizing problem, but I don't know where can I act, I searched something in SPRO but I found nothing useful.
I hope that you are able to help me with these small informations or at least are able to suggest me what can I search
Bye!

your network profile does not seem to have status profile
check if you used a template with the one activity having status profile
also check field selection for network as your status profile seems to be display only

Last Played is not correctly updating in Itunes

I have created a playlist that chooses songs that I have not played in the last 60 days and use this playlist to update my 1GB shuffle. Problem is that when I play the song on the Shuffle, and then re-sync, the Last Played date does not always update, even when I know I have completely played the song. The last played date is not properly displayed when viewing the Shuffle through Itunes either. For example, if I listen to 10 songs on a plane flight, maybe 2 will show up as having been played.
I am 1 day over chat support... bummer.

By the way here is the link to Itunes store in case it helps
http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=207881972

Mail does not correctly reflect read status of Gmail IMAP messages

Apple Mail is no longer correctly reflecting the read status of emails that have been read on other devices/computers when viewing my Gmail IMAP inbox. Whereas my iPhone and Gmail account both show changes in items' read status immediately or on next mail retrieval, in Apple Mail the only way I have currently of updating the read status is to quit Mail and restart it. Neither automatic fetching of Mail, nor clicking "Get Mail", nor right-clicking the Inbox and choosing "Synchronize Gmail" work.
My other IMAP account (MobileMe) does not exhibit this behaviour, but Mail.app does this with Gmail on both of my desktop computers.
Anyone out there with a similar problem? And are there any possible solutions, or is it a bug/incompatibility with GMail?

This problem is still occurring for me in 10.5.5 - I even tested it by creating a new gmail account with only 1 message in it, in case it was a problem with large mailboxes, and the same thing happened.
Mail messages marked read elsewhere are not updated in Mail on the next send/receive. I wonder if everyone with this problem could report the bug at http://www.apple.com/support/feedback and see if we can get this solved in 10.5.6

Mac Pro not correctly updating?

Can anyone help me?
I am working on a Mac Pro 5,1 (OSX 10.6.8).
This computer will not update correctly. If I try to install multiple updates, it tells me the computer must restart in order to install the updates. So I click on restart, and it actually does more of a log out. No updates ever occur.
So if I select to install multiple updates.... the updates fail. However, if I update individually... updating works.
So I am trying to figure out how to fix the problem. I am sure someone will just say, simply update individually. That is not an option, in my estimation. This is an expensive product that should function normally and as intended.
Any suggestions? Thanks

Well, there is the rare chance that you have system disk drive problems of one type or another and are not doing what maintenance the end user can and should do including clone your system and use Disk Repair and other tools.
You may even need to try with a clean install and update, and then use Setup Assistant.
Nothing beats having bootable system backups along with TimeMachine.
If you have Lion or Mountain Lion use Recovery Mode.
Use Safe Mode too.
Computers need the tires changed and rotated and oil, air and brake fluid maintained too.

W2012 R2 Server not reporting update deployment status

Hello,
I have a strange issue with some of my Windows 2012 R2 Servers. I am using Automatic Deployment Rules for deploying Windows Updates to my client.
On my deployment, I have ~30 W2012R2 clients. I don't know why, but 50% of my clients are not reporting correctly to SCCM. When I go to the "Monitoring" -> "Deployments" and I analyze the report, my 50% faulty client are under the
"Unknow" tabs.
I have already check, and it's not a FW issue. I have other ADR and clients are reporting correctly.
This issue only appears with 2012 R2 client.
Have you got already see this behaviour ?
Thanks

Hello,
I have checked the log, and I didn't see anything strange.
In the C:\Windows\WindowsUpdate.log, I have see this :
The first line is "OpenReportingWebServiceConnection, reporting URL = http://MYSCCMSERVER:8530/ReportingWebService/ReportingWebService.asmx"
Why I can see in the log FQDN of microsoft ? Is this normal ?

BI Plug-in does not correctly update Excel reports

Hello All,
I am having issues in that when I export to Excel 2010, the BI Plug-in will not refresh reports with rows that repeat, it still continues to merge the rows even though the reports are set up to repeat in BI Answers. Any help would be greatly appreciated.
Thanks,
Jacob Nguyen
Edited by: 948195 on Jul 24, 2012 8:56 AM

Hi Praneeth,
        Follow the link to get SSO fixed - make sure you did all steps without missing a one.
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWwithSAPBOBI4.0CommonSemanticLayer(UNX)orBICS
       SSO.Enabled , SecSapr3 and default.logon must be configured at 2-3 different config files at your BO as only
       WEB-INF file configure doesn't do the job.
Thanks,
Suresh Reddy

System status not get updated.

hai any one can help me in this pls
my client created sevice orders in crm system and in these some details are reflected in to mobile client.There is integration between in CRM & Mobile clients.
present requirement is system status is not get updated.
user status is released.but in system status showing like 1) open 2) contains error. This is occure for some sevice orders which are created in perticular transaction type for suppose if my client created 1000 service orders in that 200 or 250 orders status not get updated.
Because of this the followup document is not created.
For temparary pupose to overcome this issue we are doing like this. There are two mandatory fields are there in that any one delete and reenter the same value then automatically the system status get updated in to release status.
where the problem whether is in configuration or it is in system
or it is some technical. Before its worked properly recently they got this issue. How can i overcome this issue permanently.

Hi
The status of a sales transaction, saved in CRM Enterprise must be without errors so that it can be transferred to the mobile client
Sales transactions with errors can be transferred from the mobile client to CRM Enterprise.
Check the table CDBD_STATUS
Reward with points if helpful
Regards
Manohar

Credit exposure not correct in SAP

Hello,
My company has over 3.2 million accounts in our system and we are coming across the issue of credit exposure not being accurate for customers which is causing credit checks that should not be necessary. It look likes what is happening is that once the open sales order is invoiced the amount is staying locked in the exposure and then it is also added into receivables which is essentially doubling the exposure from what it should be. Is there any configuration changes that we can use to correct this?? With the high volume of customers and transactions on a daily basis this issue is causing a lot of extra work and customer issues. Your assistance is appreciated.
James

Hello,
It happens that LIS is not correctly updated by SAP and that the credit exposure is incorect.
Have a look at the program RVKRED07. You may have to play with the parameters to find the correct combination for the update.
PROTB = X
NOBLOCK = X
You may consider also setting up a daily batch job ...
In fact you have 2 progams given by SAP
RVKRED88, it calls RVKRED07 in test mode
RVKRED77, it calls RVKRED07 in real mode
You can also implement the following reoprts
Z_CREDIT_VALUE_COMPARE (see note 666587 and 864105)
Z_CREDIT_VALUE_COMPARE_DCC (see note 1040893)
Other OSS notes for you, depending on you SAP version
666587
842058
864105
389377
381789
Jean-Christophe

"Not Listend To Recently" iTunes to iPhone Sync Question/Problem

iPhone 3G w/3.0, iTunes 8.2, Windows Vista
I searched the FAQ and the posts, I see others ask similar question, but not a clear answer yet.
I have a number of Podcasts that I listen to daily, on my iPhone, NEVER on my computer. I regularly get the little ! saying this podcast will not update because you have not listend to it recently. HOW do I get my computer to recognize/sync the fact that I HAVE listened to the podcast recently?
According to the docs, the computer and phone will keep track of where you are in the podcast. The blue dots are always on my iTunes Podcasts.
Thanks in Advance.

There is an increasingly common problem where listens on the iPod (and it may well apply to the iPhone as well) are not being updated back to iTunes upon syncing.
Is that the problem you are experiencing? If so, FYI there has been no solution yet. The only remedy, which I found by accident, is to reboot the iTunes machine before syncing the iPod. A pain I know, but give it a try.

Field FKSTA- Billing status of delivery-related billing documents not getting updated

Hi Experts,
I have a requirement wherein I need to fetch the FKSTA - Billing status of delivery-related billing documents into the datasource 2lis_11_VASTI. I have checked a lot of threads on this topic but have not found a concrete solution yet.
I have checked the settings in vov7 and vov8 and everything seems to be in place. I have also checked in table VBUP, when I filter based on field FKSTA = 'C', it shows me the outbound delivery document nos. But when I use the related sales document, it shows me blank values. VBUK as well doesn't show any values for field FKSTK.
I would like to know how and where I can identify the 'billing status of delivery- related' document.
I can see in VBUP table that if I enter the sales document no. related to the delivery document, it does not show the correct status. I believe that the statuses should ideally get updated to the underlying VBUK and VBUP tables. Is there any way to update and align them?
Is there a workaround, a similar field that i can use for datasource enhancement that will give me the correct values?
Appreciate any help I can get on this as it is urgent.
Thanks,
AM

Hi,
You are correct that stauts is updated in table VBUK and VBUP.
However, a sales order does not determine a billing status for delivery related billing, field
VBUP-FKSTA is only determined for delivey.
So, it is correct behavior that VBUP-FKSTA = BLANK when searching VBUP with
VBUP-VBELN = sales order number.
Just because of above reason, you will not find billing status field in VA03 -> goto header/item;
you could only find billing status field for delivery in VL03N -> status overview.
It seems that you are trying to find out sales orders that have been fully deliveried and fully billed, am I right? As far as I know, there is no directly table/field/tcode that could meet your requirement.
You could consider following workaround:
firstly, get a list of deliveries that have been fully billied(search VBUP with VBUP-FKSTA = C or search VBUK with VBUK-FKSTK = C);
Secondly, using these deliveries to search table VBFA to find out related sales orders.
Hope this helps.
Best regards,
Crystal

Muse is NOT Working, Illustrator Update FAILS, Apps list is NOT Correct. What Do I Do?

I started having issues with CC a couple months ago out of no where. Mostly just with updates from CC for the apps.
I did the suggested re-installs of CC and then had to try to update by fully re-installing apps and I had funciontality but errors trying to update Illustrator and most of the installed apps did not show up in the CC interface.
Now I try to do a quick update to a site thru Muse and it tells me that it would not validate my subscription and would be canceled in 2 days.
I again followed instructions on Adobe to delete a couple of folders and try to re start Muse.
Now I get an unexpected error and cnont use the program.
I test out CC for updates and the Muse app shows up to date, Bridge app surprisingly updated fine, and as expected, once again, Illustrator errors out on the update and still my CC app list is not correct so I honestly dont know what updates I have to do on the other programs.
I checked my subscription details and everything is fine.
Not having the ability to update efficiently from CC is not a huge deal as long as I can use the programs to work. Not being abel to work because of some programing hiccup is NOT ACCEPTABLE.
Anybody have any possible paths to fix these latest issues?
Should I start by wiping the machine clean of any installs and then completely try to re-install everything?
what a pain.

UPDATE:
I got home tonight and tried to open up Muse.
This time it opened up the login screen and actually made it past the point it errored at previously.
Illustrator update stilll gives an Error 8.

Is there a way to reset my iphone i did the latest update on it and now it will not let me download any apps. I tried the general reset but it keeps denieing me saying that my passcode is not correct. This is the same passcode that i use to unlock

Is there any way to reset my iphone i did the latest update and now i cant download any new apps? I tried to do the general reset but it keeps telling me that my passcode is not correct. This is the same passcode that I use to unlock my phine though to get in to it.

press and hold both the power and home buttons until the apple logo appears and then let them go. Wait till the phone restarts and then try

My macbook pro was first installed with leopard and bootcamp 3.2. Now i updated to lion. The problem is now that it is not possible to update to bootcamp 3.3. or 4.0. The report: The installation source is not correct. What can i do? Thanks for answer.

my macbook pro was first installed with leopard and bootcamp 3.2 under windows 7. After update to lion it is no more possible to update bootcamp to 3.3. or 4.0. The report: The installation source ist not correct. What can i do?
auf Deutsch:
Auf meinem Macbook pro war Leopard und bootcamp 3.2 unter windows 7 installiert. Nach dem update auf lion kann bootcamp nicht mehr upgedatet werden. Weder auf 3.3. noch auf 4.0. Folgende Fehlermeldung kommt: Boot camp Dienste: Das installierte Produkt stimmt nicht mit der Installationsquelle überein. ... Was kann ich tun?

It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Mylenium

IT roles not correctly updating assignedBy status in act sync

Similar Messages

Maybe you are looking for