Items available in CVC not in planning book

Hi Team,
we are facing some error... we need to activate some new products in the forecasting process so the items are already transferred to SCM .Items are available in SCM data base and even in CVC but it not reflecting in the planning book.
Pls help me to solve it.
Regards,
Vijesh

Hi
After looking into your response, I tried to reproduce the scenario in my system. However, the master data maintained using RSDMD (with or without nav attributes) being reflected immediately in /sapapo/mc62.
Have you checked your infoobject and master data activation status? May not be a valid question as you already mentioned that other InfoCube can show the added value.
Probably, executing report RSDDS_AGGREGATES_MAINTAIN might fix the issue. Pl check.
Thanks
Ankit

Similar Messages

Process Chain error while loading CVC's into planning book

Hi I am trying to run the process chain and till half chain it was good and at one place after VMI Generate CVC's there is a box showing in RED and it is Load Infocube and when i checked it in batch processing it says end with errors and I could'nt find exactly what to do to run the entire process chain. Please anybody can tell me how can i resolve this issue.
Thanks
Hari

Hi Senthil,
For Some of the SKUs it is giving the Error , some abrupt values are stored in Live Cache for these SKUs(CVC), thats why it giving the Error.
The only solution is ..i have to delete the CVCs and create new one...
But i will loose the data as we cant take the Backup of Old CVC data --> Giving COM Error
The reason of Abrupt Values in Live Cache Could Be -->.>
Macro/Alerts
How can we fix these types of Error , as regularly i am getting these Error??
Is there any Note/Patch to overcome this issue?
Will be GR8 if i will get the solution..
Regards,
Rajesh Patil

APO Cube data is not showing in Planning Book

Hi All,
Please help me with the following issue.. We use to load the data to APO cube manually from Flat file by executing BW (Backlog, Historical) reports every week. (not a good practice). That time Planning book was working fine.. And now we automated this process by creating the data marts from BW ODS to APO Cube and the loads are successful with process chain.. But I dont see cube data in Planning book.. In this process the existing info objects properties (Alpha has been removed) has been changed on APO side for mapping and loading purpose.. So when I load the data , the load is successful but I dont see the data in the Planning book(Note : the cube was refreshed and I guess I need to generate CVCs and do some thing in TSCUBE).. Please explain me the details steps. I am BW consultant and dont know much on APO.Present status i see the data in APO cube and not in Planning Book
Thank you
Arya
Edited by: karan s on Apr 3, 2008 8:58 PM
Edited by: karan s on Apr 3, 2008 8:59 PM

Hi karan
have you loaded the data from APO cube into the Planning book with TSCUBE ? you can add this step in your process chain also.
If you have made changes in the strcture of BW data mapping then you dont need to change CVCs.

SNP Planning Book not showing Bucket Capacity

Hi,
I have a process in which for some materials subcontracting is required and this subcontractors are managed under SNP. We define the capacity of subcontractor in numbers. Bucket Capacity is defined in the Master Data of Resource of this subcontractors and it is not getting viewed in the planning book.
Can some one help me why it is not in Planning Book.

Hi,
Please run the planning area consistancy check and try the same with SNP planning book.Also check the live cahe version of the resource.Ignore if you already have done all these steps.
Also check the UOM of the bucket resource and the planning area UoM.
Hope this can help.
regards,
kaushik

Restricting DP Planning Books by Users

Hi All:
I have a situation where we have two business' and each of them have their own planning area and their respective planning book. One business does not want to see the other business' planning book. We have two sets of users who should be able to see one planning book each. How can I do that? I am not a security person. OUr team setup something and now when I log into the test user ID I try to execute /SAPAPO/SDP94, it gives me an error " Planning Book is defect. You dont have authorization for other books". The SU53 gives me:
> Authorization check failed
> Authorization Obj C_APO_PB
    > Auth Field ACTVT                                         03
    > Auth Field APO_DVIEW Data View             Z_DQ_ALL_TEST
    > Auth field APO_PLBK2 Planning Book          Z_DQ_ALL_TEST
> User's Auth data Q:ZFXDPMGR
> C_APO_PB etc etc   >>>>>> all green.
The Z_DQ_ALL_TEST is not the planning book that this user should access. And the User Auth data after the Auth FAilure are all green and has the correct data.
Where is the Z_DQ_ALL_TEST coming from? Any help would be greatly appreciated.
Thanks
Ryan

Hello Ryan,
Please check the transaction /sapapo/sdpplbk.
If there's default planning boo/data view assigned to the userID, please remove it.
I suppose the incorrect planning book/data view comes from here.
Best Regards,
Ada

Delete Planning Book

Hi All,
I created planning area and planning books for testing. Since they were not required anymore I decided to delete all. I assumed that when I delete planning area it deletes planning book as well. but that did not happen. Now planning area is deleted but i still see planning book in interactive planning.
Please let me know how do I delete this planning book since when try using standard planning book T code to delete it give me error message " planning area does not exists"
Regards,
Harshil Desai

Thanks all for your response.
@ Aparna: When you delete planning area system deletes all dependent objects like planning book/data view.
In my case when I deleted planning area, system did not delete planning books because planning book/data view was locked by status "change by author only".
@ Rajesh: Awarding full points for hint. I could have delete the record completely but I took different rout be changing user name in table entry for respective planning book and then I deleted planning book from standard planning book transaction.
Regards,
Harshil Desai

Data available in RRP3 view but not coming in SNP planning book

Hi All,
I am facing an issue in SNP book. I can see forecasts in RRP3 view. But when I load the same data in SNP planning book, the forecasts are not coming there (forecast KF)
I ran LC Cons check, PA cons check, OM17, but still the same result.
Any pointer would be highly valuable.
Regards,
Manotosh Bhattacharya

Hi
If you look at the standard Forecast KF 9ADFCST in your planning area, it is usually assigned the Category Group of DF1. This category group only contains the category FA for forecast. If you create Forecast in /SAPAPO/RRP3, this will create Additional Forecast or category group FC. Therefore any forecast generated this way will not appear against the standard planning book KF.
So you have two choices, if your forecast is only FC category then use the KF 9AAFCST Forecast (Addittional) in your data view or create a new Category Group with both FA and FC assigned to it and then assign this Categotry Group to 9ADFCST in your planning area.
Regards
Ian

Why are some items on itunes not available in other countries. like the book world war z by max brooks?

ok so i want to buy max brooks novel WWZ from the uk itunes store. but i cant becuase its only available in the USA..... why is that? why are some things limited to certain countries? im gonna go to the local book store and just buy a (much cheaper) hard back copy anyway, but it genuinely makes zero sense why itunes does this. very frustrating is a understatement as this happens with music and videos also! ......

It's the content providers decision, not Apple - the book publisher, record company, film studio have to grant Apple a license to sell their content in each country. So if the book publisher has only granted Apple a license to sell it in the US store but not the UK store, then Apple can't put in in the UK store.

Data selection not showing in Planning book

Hi everybody,
We were using one info cube on APO side and so from cube the data will be shown in the APO planning book..
Now we modifed the cube on APO by adding new infosource and new mappings from BW side with data marts.. I can see the data is successful loaded to cube, but the slection it self is not showing.. i dont see anything related to cube and so i couldnt run the planning book.. My point is data is available in cube bu planning book now have no data...it is not showing any data..
thanks
arya

There might be few things you should probably check
1) In the planning object structure just activate the POB. through the context menu.
2) I think you might have assigned the Infocube into the Planning areas as Infocube Fed key figures. Make sure that all the characteristics remain the same. There might be inconsistency between the char of the new Cube and the already existing PA.
3) Create time series to the PA or perform initialization of the PA.
4) Try creating a CVC manually and see if it allows to create.
Atleast now you should be able to see the key figures in the Planning Area.
Let me know if it works.

Drop Ship the item if stock is not available

Hi,
We have a requirement where,
A item is about to get expire (No more demand) but organization is having some stock of the item. So Purchase team has stopped procuring the item.
Now, when we receive any order for the specific item, client wants to look at the present stock and ship it if its available. If not, create drop shipment.
Does anyone aware of this functionality where a single item will behave as a stocked item if the stock is available and drop ship item, if stock is not available.
Any help will highly appreciated.

A given item CAN be procured internally or externally.
But that attribute is set when the sales order line is booked.
So you need some kind of a personalization that will look at the available qty of the item being ordered and then set the Source type to External if enough qty is not available.
Hope this helps
Sandeep Gandhi

For requirement strategy 30 forecast not seen in planning book

Hi Experts,
I am using planning strategy 50 in ECC and same has been transfered to APO as 30. Just to test scenario I have entered manually forecast in product view and created sales order in ECC which is CIFed to APO. Now as per SAP guide, scenario works fine in product view, where sales orders consumes forecast and shows remaining forcast after consumption.
But the remaining forecast and sales order is not seen in SNP planning book. Any suggestions?
Best regards,
Vaibhav

Dear Vaibhav,
I have a basic question ? Strategy group 50 in ECC comes to APO as Requirement Strategy 30 ..
But it is a Make to Order strategy .
Do you think that it is logical to plan /Forecast a make to order product?
You can enter a forecast in product view , system will not stop you.
If you click on the item it will show as make to order planning segment.
So, I dont think that you can forecast .
whatever you see the product view cannot be seen in the planning book.
Regards,
Srinivas.S

Demand on VC material not visible in SNP planning book

Hi Experts,
Is there any way to plan VC (Variant Configuration ) materials in SNP at the group level ?
I will explain the scenario more in details below
I have an VC material say X. Material X has end product Y attached to it (material variant). When material X is cifed to APO, it appears as configurable product in APO & is a top level product. Now when I create a demand on material X through DP, the demand appears in product view (RRP3). However the demand does not appear in the SNP planning book nor it gets selected during background planning run. The system is configured as Variant Configuration & not CDP.
Is it possible to plan material X in SNP ? If possible how can the demand be read in SNP ?
Thanks in advance
Regards
Sandeep

Hi Sandeep,
One of the limitations of Characteristics Based Forecasting is, CBF results can only be used in PPDS and not in SNP, hence it is not possible to plan that material X in SNP. Even though you use MC90 transaction which is release DP to SNP, but the data will not be available in SNP
That material X will be planned only in PPDS, there are two ways to plan, those are
1. one way is by releasing CBF results to active version using MC90 transaction, during this release, you should maintain consumption group in release settings and in product master, in this case you have to use Forecast Check/Allocation check as a part of ATP/GATP, here you can not use CTP or MATP
2.the other way is by releasing CBF results to inactive version using MC90 transaction, during this release you should not define consumption groups, generate the dependent requirements in inactive verison using heuristics in PPDS , and convert dependent requirements from inactive version to Forecast - active version using /SAPAPO/DMP2 transaction, in this case you can use MATP/CTP as a part of GATP
-Deepak

Time bucket not displaying in planning book

When I opened planning book, the time bucket is not displaying as it used to be. I tried to select CVC to be displayed in the planning book and got the following error message:
@5C\QError@ Insufficient information about read period transferred
@5C\QError@ Error reading data - Planning book cannot be processed further
Insufficient information about read period transferred
Message no. /SAPAPO/TSM231
This internal error should not occur during normal processing. However if this message is displayed, contact your system administration or the SAP hotline quoting the message number.
Any idea what went wrong?

Hi Nic,
Either someone deleted the time bucket profile, or else the periodicities in the time bucket profile are not in line with the periodicity allowed in your planning area.
Go to Advanced Planning and Optimization-> Demand Planning -> Environment -> Current Settings -> Maintain Time Buckets Profile for Demand Plng and Supply Network Plng, or directly use the tcode "/SAPAPO/TR30".
Check that your time bucket profiles ZDP_PBP_9Q & ZDP_PBP_5Q exist by using F4 help, and also select them to see what periods are used in the time bucket profile e.g. weeks, days, etc.
If you don't find the time bucket profile, then they need to be created (based on names, my guess is that *9Q will contain 9 quarters, and *5Q will contain 5 quarters). I expect that issue lies here itself.
If time buckets profile exist, then check the following:
1) Go to /sapapo/msdp_admin, select your planning area. See the storage bucket profile name in the "info" tab.
2) Go to /SAPAPO/TR32 (Periodicities for Planning Area). Give the name of the Storage bucket profile that you see in 1.
3) Check what periods are used in storage bucket profile.
4) Storage bucket profile needs to have lower periods maintained than the time bucket profile. e.g. assuming that your time bucket profile has quarters, then you need to have at least quarter maintained in storage bucket profile. Even if you have day or week or month selected in storage bucket profile, it's ok because these are smaller periods than quarters what you have in time bucket profile.
Also make a note if "post period" is checked. Note the name of "fiscal year variant" if that is maintained along with this tick. I hope you don;t need to go further but if above don;t resolve your issue, then we need to check the fiscal year variant.
Thanks - Pawan

Copy of service plan item SPLA in contracts not working

Hi,
1. I have created a service plan product SP (item category group SPLA)
2. I copied the standard trans SC -> ZSC and item category SPLA -> ZSPL
3. I then maintained the determination as per the standard.
I have not changed any of the attributes of ZSC and ZSPL from the standard (apart from the name). But when I enter the service plan product SP as a item in ZSP (ZSPL gets determined) but I do not get the planning relevant fields such as scheduling type, scheduling rule, etc... Instead I get tabs at the item level which are for a contract product and not a plan product.
Can someone pls tell me what could be wrong since there are absolutely no changes being done to the standard and plainly a copy is created.
Regards,
DP.

Were you able to resolve this issue. We are facing the same.
Thank you

Excel upload data to planning book not working

Hello Gurus,
i have checked the online resources first before posting this thread here as this is most old topic relating to upload of excel data to planning book key figures.
Here is what i have done so far
1) from the planning book, i chose a view and downloaded the file to desktop and saved it as CSV. i populated the key figure values and saved the csv file as-is back to desktop
2) i had to remove the hdeader from the file as APO threw back an error that it could not interpret the period (header) as the number
3) when i took out the header i simply pasted the values and the file was ok
4) i went to planning book, loaded the file, checked the file and it said that the data was read and i clicked on upload the file
5) everything was green, then but i do not see the values in the grid of the planning book
what else i'm missing.
can someone please help me
thanks
Ravi

Hello DB and Ada. Thank you for your valuable suggestions. I know i might be missing something silly here. If i keep the header that i downloaded from the planning book into csv file, i get an error while uploading the file back to planning book that unable to interpret 11/2014 as a number.
P11/2014 is the header, Period 11/2014 is the fiscal period. we plan in fiscal periods.
if i take out the header from the csv file and just populate the key figure values, then i do not get any error when i load the file back to planning book, but then the values do not show up in the planning book grid.
i'm keeping the planning book in the change mode while uploading the file as i got that error saying that i need to keep the planning book in change mode for the file to load data properly to planning book.
Thanks
Ravi

Items available in CVC not in planning book

Similar Messages

Maybe you are looking for