ITunes 10 Not Working Properly on Windows 7 64-bit

Hello all.
I had installed iTunes 10 for Windows 7 64-bit on my Windows 7 64-bit system. After that, my computer would not recognize my iPhone at all, so I uninstalled everything Apple on my computer and reinstalled iTunes 10. Now after reinstallation, my computer recognizes my phone again, but when I open up iTunes, I get this message:
This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.
The version of iTunes I have installed IS the 64-bit version (installer name iTunes64Setup.exe from the Apple site). How come iTunes 10 thinks it is not 64-bit and how can I resolve it?
Thanks in advance for any help.
Edit: Just did another install/reinstall, now my phone is back to being completely unrecognized by my computer. I've tried all the suggestions I could find on the Apple site, disabling AV, running as administrator, manually starting Apple Mobile Service, and when I try to update drivers though driver manager, I get an access denied message.
Message was edited by: rwaite

I spent some time on the phone this morning with Apple. Here's a link they sent me: http://support.apple.com/kb/HT1923
It's more than just uninstalling Itunes; there are 5 other apps that have to be uninstalled and in specific order. This particular Knowledge Base article applies to Windows Vista or Windows 7. For other Windows versions you'd have to look up the article for Windows XP.
Hope this helps.

Similar Messages

  • HT1926 Why is my iTunes not working properly on windows 8? please help me

    Good afternoon,
    I have recently perchased a HP laptop with windows 8, I am not overly impressed with the design but what really upsets me is that my itunes is not picking up my iphone or ipad when opening Itunes on the laptop. On the off chance that it does, it just connects and reconects but does not go sny further.
    Kind regards
    Dizzy

    Run windows update to ensure that your system is current (even if you just purchased it, there may be updates available).
    After running windows update, you may need to remove and reinstall iTunes to make sure everything is in the right place.
    This troubleshooting assistant may be of assistance:
    http://www.apple.com/support/iphone/assistant/itunes/
    If you are going to remove and reinstall iTunes, follow this KB article:
    http://support.apple.com/kb/HT1923
    Hope this helps

  • Flash player does not work properly on Windows 7 32 bits

    Hello,
    My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
    My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
    I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
    In fact, it works correctly on some sites, like youtube, but not on some others like :
    http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
    http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
    http://www.myspace.com/ => no audio player, right click gives flash context menu
    some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
    I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
    No problem too with flash player on http://www.adobe.com/software/flash/about/
    But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
    I cannot check boxes,
    My changes are not saved.
    In most of flash animations, videos, ...,
    when I click on parameters, I cannot do anything, even closing.
    when I am in full screen mode, the message "press escape to exit...." does not disappear.
    Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
    Thank you for your help

    Hi eidnolb
    Thanks for your answer.
    This is what I have :
    Verify user permissions
    I have an administrator account.
    I tried (uninstall, install and run) with super-administrator account for same results
    Install the most current version.
    I am running the latest version (10.0.45.2)
    Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
    I did not "clean" my computer.
    Troubleshoot Pop-up blockers
    I have no Pop-up or esle blocker  software.
    Ensure that Internet utilities do not block Flash Player
    I tried (uninstall, install and run) without Avast.
    I have windows 7 firewall. I do not know where I can allow ActiveX  controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
    Fix machine crashes when displaying Flash content
    I have no freez or crash.
    Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
    Using FF, I have SWF vs  10.0.45.2 and it is Enabled
    I really do not understand !!
    Thanks,
    Ju'

  • I can't get iTunes to work properly on Windows 8

    I can't get iTunes to work properly on Windows 8. I tried everything and iTunes is NOT compatible with Windows 8. There is either an iTunes issue or a Microsoft issue.

    I finally got it to work right. Some files and folders (iTunes video files, etc) were referenced to my iTunes account, I copied from my backup (external) Hard Drive to my system Hard Drive. The only thing that can keep me from accessing my wish list for some time is a very heavy Internet traffic via iTunes players to iTunes Store. So everything is now NORMAL.

  • Itunes not working properly

    I need help, every time i play videos there's an error message sayings itunes not working properly even though i already updated it to newest versions?

    Try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • ITunes not working properly with HP running Vista home premier

    My Ipod touch works fine on my windows XP pro system but does not sync photos and podcasts from my other computer at home: new HP Multimedia system running Vista Home Premier. It goes through all the motions but will only add a few photos from a file and they are partially corrupt. Many times it won't add any selected photos. Same with podcasts, they won't sync to the ipod. Have tried various USB ports.

    well, it is easy. i just wish it to sync in a manner that i do not get frustrated with it. it just does not like to sync when i open up itunes on desktop to update apps when they have updates. i have got to revert to plugging in the phone and ipad for it to sync and update apps. if you read through the whole thing you would have found it out. all i am saying is that itunes 10.6.1 and ios 5.1 have bugs and issues that make it hard for a iphone and ipad user to sync and update apps. itunes is slow to open with windows 7 as well as i did not mention that before but i have mentioned it in my other forum posts.
    summary:
    itunes 10.6.1, is slow to open on windows 7,
    syncing ipad and iphone does not update without plugging them in.
    wifi sync is not working properly or as it should, it doesn't recognize phone and ipad unless plugged in.

  • ITunes Not working Properly/Not Syncing on Network properly

    Hello there,
    For weeks and weeks now on my Computer iTunes will not see or recognize my iPhone 4S and my iPad 3. When I try to sync by opening iTunes on desktop and then wake up pho ad iPad it does not see it and will not show them in iTunes no matter what I do. I have reset network, forget network, renew lease on wifi network and shut down both and turned back on and nothing has worked!!! I have reported this many times as well in the past. It is like Apple themselves have changed the way iTunes suyncs with the phone and ipad when trying to sync to make updates on apps.I am at wits end!!! Since they did the update to 10.6.1 it has been a pain in the you know what to sync to update apps.I got to plug both in to computer for them to sync and update apps or update apps from the iphoor ipad itself. Please Apple or someone who knows what needs to be fixed please fix it it is very aggrevating it has been weeks like this and I would have thoughht that Apple would have gotten the hint when I have seen others complain about this as well. It is from what I see most of the time it is with Windows 7 computers that have this syncing connectivity issue but I do see it happen in Wndows Vista as well as I have both operating systems here with 2 iphones, 1 iphone 4s logged in to windows vista when updating apps and the other which is windows 7 and it has ipad 3 and iphone 4s attached to it to sync when updates to apps become available. I hope some can make sense of all this and help or get apple to fix the issue finally!!!!

    well, it is easy. i just wish it to sync in a manner that i do not get frustrated with it. it just does not like to sync when i open up itunes on desktop to update apps when they have updates. i have got to revert to plugging in the phone and ipad for it to sync and update apps. if you read through the whole thing you would have found it out. all i am saying is that itunes 10.6.1 and ios 5.1 have bugs and issues that make it hard for a iphone and ipad user to sync and update apps. itunes is slow to open with windows 7 as well as i did not mention that before but i have mentioned it in my other forum posts.
    summary:
    itunes 10.6.1, is slow to open on windows 7,
    syncing ipad and iphone does not update without plugging them in.
    wifi sync is not working properly or as it should, it doesn't recognize phone and ipad unless plugged in.

  • Gadgets not working properly in windows 7

    For some reason the gadgets in windows 7 are not working properly. I can open the gadget gallery and select a gadget, but it doesn't show the entire thing. For example i select the clock, and all it shows is a black square with the red ticking hand frozen. Another example is the CPU meter. All it shows when i click on it is a little white square where the meter should be. I can still close the gadgets by way of the close button on each gadget though (the calendar doesn't appear at all).  UAC is turned on and i have rebooted the pc, same thing still happening. (It is Enterprise edition if that makes any difference). If anyone could help that would be great!

    Have you come across the problem where some of the Gadgets that you added to the Sidebar/Desktop are not displayed correctly? For example, the clock gadget may be displayed as a black square containing only the "seconds" hand. Other gadgets may show up as
    white rectangles with an information (i) icon and a plus sign. The settings button next to the gadget does not work, but the
    x to close does. Here are some screenshots:
    The above-mentioned behavior is caused due to the following reasons:
    A subkey with foreign/ASCII character exists under the "Zones" registry key.
    XML registration is missing in the system.
    Use these steps to fix the problem:
    Fix for Case 1
    1. Click Start, type Regedit.exe and press {ENTER}
    2. Navigate to the following branch:
    HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Internet Settings \ Zones
    3. Under the Zones key, delete the subkey shown with an ASCII character:
    4. Exit the Registry Editor.
    5. Logoff and login back to your user account.
    Fix for Case 2
    1. Open an
    elevated Command Prompt window. To open an elevated (admin) Command Prompt, click Start, click All Programs, click Accessories,
    right-click Command Prompt, and then click Run as administrator.
    2. In the Command Prompt window, type the following command and press ENTER:
    regsvr32 msxml3.dll
    3. Similarly, run these commands:
    regsvr32 scrrun.dll
    regsvr32 jscript.dll
    You should see the DllRegisterServer in <filename> succeeded message for each command executed.
    4. Logoff and login back to your user account and see if the Gadgets display correctly.

  • ITunes will not work properly on windows PC

    iTunes performance is slow and my devices will not synch properly after uninstalling and reinstalling the application 3 times on my windows PC. When I tried to update my phone, it took hours and failed to backup anything on my phone from July to now (Dec) and will not recognize my iPad.

    Follow the directions of tt2 in https://discussions.apple.com/thread/5822086

  • DVD-Rom drive in Satellite C655-S5128 not working properly in Windows 8

    I recently upgraded my system from Windows 7 to Windows 8. However, the DVD-Rom drive after the upgrade no longer works properly -- it now treats the pre-recorded disk as if it was completely blank. I tried reinstalling the Toshiba Disc Creator, but that did not work.
    Any solution?

    You apparently did not use the Toshiba Upgrade Assistant in upgrading to Windows 8.  See HERE for DVD and Disk Creator problems occurring during the upgrade and solutions.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • 10.7 not working properly in windows 7

    Hi,
    I have windows 7 32 Bit OS. I had downloaded 10.7 just now & installed it.
    It opened first time. but later on every time i try to run itunes, it says "iTunes has stopped working".
    A Problem caused the program to stop working correctly. Windows will close the program.

    Have you come across the problem where some of the Gadgets that you added to the Sidebar/Desktop are not displayed correctly? For example, the clock gadget may be displayed as a black square containing only the "seconds" hand. Other gadgets may show up as
    white rectangles with an information (i) icon and a plus sign. The settings button next to the gadget does not work, but the
    x to close does. Here are some screenshots:
    The above-mentioned behavior is caused due to the following reasons:
    A subkey with foreign/ASCII character exists under the "Zones" registry key.
    XML registration is missing in the system.
    Use these steps to fix the problem:
    Fix for Case 1
    1. Click Start, type Regedit.exe and press {ENTER}
    2. Navigate to the following branch:
    HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Internet Settings \ Zones
    3. Under the Zones key, delete the subkey shown with an ASCII character:
    4. Exit the Registry Editor.
    5. Logoff and login back to your user account.
    Fix for Case 2
    1. Open an
    elevated Command Prompt window. To open an elevated (admin) Command Prompt, click Start, click All Programs, click Accessories,
    right-click Command Prompt, and then click Run as administrator.
    2. In the Command Prompt window, type the following command and press ENTER:
    regsvr32 msxml3.dll
    3. Similarly, run these commands:
    regsvr32 scrrun.dll
    regsvr32 jscript.dll
    You should see the DllRegisterServer in <filename> succeeded message for each command executed.
    4. Logoff and login back to your user account and see if the Gadgets display correctly.

  • Home sharing for iTunes not working between my Windows 7 and Windows Vista?

    I have a HP laptop with Windows 7 on it. The laptop has the latest edition of iTunes. My desktop computer has Windows Vista and iTunes 9. When I turn on home sharing, the library on my Windows 7 appears under 'Shared' on my vista. However, the library from my vista will NOT appear on my laptop.
    I have turned the home sharing option on and off multiple times on both computers. I've also edited the preferences for the 'Sharing' option to make sure that both libraries can be seen and shared. Yet it still isn't working. I have even tried restarting my wireless router and it STILL is not working.
    Is anyone else having a similar problem or know how to help?

    In the course of your troubleshooting to date, have you also worked through the following document, Dea?
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

  • Toshiba DVD player is not working properly since Windows 7 upgrade

    I recently upgraded to Windows 7 and can no longer get my Toshiba DVD player to work.
    I have tried updating drivers, uninstalling and reinstalling. Also, I tried to download a Realtec driver meant for Vista from a suggestion on another thread and that was even worse. It is currently uninstalled, but when I install it, it either doesn't play at all or I get an error saying that it can't connect to the output device.
    Has someone experienced a similar problem on Windows 7?

    I have the same problem - I have upgraded my new Toshiba satellite L300-29V and the Toshiba DVD player wont work. The error message I get is "modules needed for this application are missing - if restarting does not work then re-install application" - I don't know how to reinstall - supposedly the application is on a partition on my hard drive but I dont know how to get at it. Any suggestions please?
    Tim

  • Usb not working properly in windows 7 x64 (890FXA-GD70)

    Hi,
    I am currently having problems with my USB ports.  A select few ports are not working.  In the device manager, windows claims to have not started up related drivers.  I tried fixing this by updating the drivers from the msi page.  This caused all the usb ports to stop working.  I am not sure what the problem is but however it does seem isolated to my windows 7 x64 install.  My keyboard and mouse still work in bios, but not once windows 7 starts up.  The keyboard and mouse also work when I use the system disk to restore back to a system checkpoint.  I am at a loss as to what could be causing this or how to fix it when the drivers supported are failing me.
    Any help would be appreciated. Thanks.
    Chris

    Quote from: Bas on 19-November-10, 22:57:34
    Those few need extra drivers.
    As they are USB3.0 ports: http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=2025
    Yea as I stated earlier, after installing these drivers all the usb ports stopped working in the current windows 7 install.

  • Whatsapp not working properly in windows

    Developers please try to fix the problem for whatsapp first because it the the most important application we find. The messages are delayed and does not show immediately, we cant sent videos and music on whatsapp. Many people refrain to buy Nokia windows phone just because of this problem. There are lots of problems in whatsapp too

    Have you come across the problem where some of the Gadgets that you added to the Sidebar/Desktop are not displayed correctly? For example, the clock gadget may be displayed as a black square containing only the "seconds" hand. Other gadgets may show up as
    white rectangles with an information (i) icon and a plus sign. The settings button next to the gadget does not work, but the
    x to close does. Here are some screenshots:
    The above-mentioned behavior is caused due to the following reasons:
    A subkey with foreign/ASCII character exists under the "Zones" registry key.
    XML registration is missing in the system.
    Use these steps to fix the problem:
    Fix for Case 1
    1. Click Start, type Regedit.exe and press {ENTER}
    2. Navigate to the following branch:
    HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Internet Settings \ Zones
    3. Under the Zones key, delete the subkey shown with an ASCII character:
    4. Exit the Registry Editor.
    5. Logoff and login back to your user account.
    Fix for Case 2
    1. Open an
    elevated Command Prompt window. To open an elevated (admin) Command Prompt, click Start, click All Programs, click Accessories,
    right-click Command Prompt, and then click Run as administrator.
    2. In the Command Prompt window, type the following command and press ENTER:
    regsvr32 msxml3.dll
    3. Similarly, run these commands:
    regsvr32 scrrun.dll
    regsvr32 jscript.dll
    You should see the DllRegisterServer in <filename> succeeded message for each command executed.
    4. Logoff and login back to your user account and see if the Gadgets display correctly.

Maybe you are looking for