ITunes 11 - Songs less than 10 seconds long - Play count doesn't increase
The title pretty much sums up my problem. Installed iTunes 11 a couple of days ago and have noticed that any track less than 10 seconds long (of which I have quite a few) will play okay in iTunes but the play count doesn't increase when the track finishes. Anything 10 seconds or above increments fine.
However, if the same short tracks are played on the iPod then it is synced, the play count goes up no problems.
Is this a "feature" of version 11 or a glitch does anyone know?
I recently started having the same identical problem when playing iTunes on my computer (WinXP). Songs play and move between computer and iPod without problems. Songs under 10 seconds are noticably affected. The number of plays and last date played do not increment. Haven't seen longer songs affected but really haven't been watching until now. In one case increased the song length from 10 to 12 seconds. It now works. But songs that did work that are under 10 seconds, now don't. Currently using v 11.0.2.06. Nothing new installed on computer.
Similar Messages
-
Why does my NEW ipod keep shutting off in less than 30 seconds of play time
Rcv'd ipod at Christmas; was setup in spanish when I first turned on & thought that was weird; had issues trying to download version 10 of itunes but after two days it finally went through successfully; charged for two days; used for first time today and it keeps shutting off after 30-90 seconds of playtime; is this a common issue or do I need to send back?
No, push the headphones firmly all the way in. The headphone jack on new nanos is very tight, make sure the plastic on the headset jack is flush with the body of the nano.
-
Skipping track after less than 1 second
I have downloaded iOS7, and I tried to delete some track from iTunes that I never listen to. Somehow, several of the songs on my iPhone have now started to skip onto the next track after less than a second of playing. I can still play the songs from iTunes on my PC, so I seem to have done something with the phone and I don't know what! I changed the settings from 'Phone' to 'Library' in the 'shared' music menu - I think that's what caused the problem, as now it seems fine having just changed it back. It's so frustrating that you can't get rid of music you don't want on your phone! There must be a way of doing it without shelling out for Match.
Do you have a circle with a red square next to some of your songs in your music app on your phone?
-
Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not
play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.Hi just wanted to let you know I solved most of my XP problems with my new IPOD. It won't recognise the IPOD or driver and froze and locked up and then the battery died. After hours of trying different things here is what I did. I completly closed computer down. Waited 15 minutes turned on and reloaded everything. I put the usb cable in but not hooked up to IPOD. I turned off Mcaffee (all of it). After my computer came on. I then went and closed everything I didn't need in the bottom toolbar. (taskbar). I then reloaded the software and waited. Took forever to reload and I don't know why but whatever it worked but I DID NOT HOOK UP THE IPOD LIKE IT SAID! I instead shut down the computer after loading the software and waited 5 minutes and turned it back on. I again waited and shut of mcaffee. It loaded everything fine this time and said new hard ware and drivers detected. I plugged my IPOD in and YES I WAS UP AND RUNNING (THIS IS AFTER 6 HOURS OF PLAYING WITH OTHER THINGS!) I am able to load and play, burn, watch movies, see pictures and everything your suppose too! The only thing I see different than the instructions is I left my usb cable plugged in and when it said to eject the disk I didn't. I also didn't plug in the IPOD (5th Gen) and then I shut down waited and then restarted the computer. I hope this helps others because I know the feeling of wanting to return something you paid dearly for and worked hard at saving money to buy one and it doesn't work. My only thing I dislike about apple is they didn't supply a ac adapter for the IPOD and the instructions say to plug it up when trying to charge battery. DUHHHHHH, ya can't do that if ya don't have one and stores are closed and won' open until Monday! But at least I am up and running. I just hate having to plug up IPOD to computer daily to charge the battery which only last a half a day1
-
Hi,
we are using SQL SERVER 2008R2 X64 RTM version.
One of the SSRS report designed by developer is consuming much more time( 5 to 6 minutes ) to fetch data from DB. Even direct run of Stored Procedure (Called in report )takes less than a second to display the result set.
Please help.
Regards Naveen MSSQL DBAHi Naveen,
Based on my understanding, you spend a little time retrieving data with a stored procedure from database in dataset designer. However, it takes long time to run the report to display the data, right?
In Reporting Services, the total time to generate a report include TimeDataRetreval, TimeProcessing and TimeRendering. In your scenario, since you mentioned retrieving data costs a little time, you should check the table
Executionlog3 in the ReportServer database to find which section costs most of time, TimeProcessing or TimeRendering. Then you can refer to this article to optimize your report:
Troubleshooting Reports: Report Performance.
Besides, if parameters exist in the report, you should declare variables inside of the stored procedure and assign the incoming parameters to the variables. For more information, please refer to the similar thread:
Fast query runs slow in SSRS.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support -
Screen Saver lasts less than a second (Wireless USB Mouse)
When I put my pointer in the hot corner (lower left), the screensaver activates for less than a second, then goes off as if I've moved the mouse or pressed a key. The pointer disappears, then reappears immediately in the corner before the screensaver goes off, so that makes me think the computer is thinking that the mouse is moving (which it is not) and thus turns off the screensaver.
I recently updated to Mavericks with the exact same mouse I was using before, which is a Microsoft Wireless Mouse 5000 with Intellipoint installed. The only way to switch off the mouse would be to disconnect the USB or remove the batteries from the mouse.
http://jimlapbap.com/files/preview/Screensaver.mov
Also, the screensaver is set to go on after 20 minutes, but it never does.
Any advice/help would be appreciated.The problem is no longer there. Repairing permissions may have been the solution, but I'm not sure because I tried a lot of things.
-
After the OS X Yosemite 10.10.3 update When I go to use Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
TS3367 When calling my husband he has less than 1 second to answer? Same when he calls me!
Help, when I FaceTime my husband he has less than 1 second to answer...if we hit accept during TNT second, it still doesn't connect?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
Cheers, Tom -
SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu -
I installed a few themes on my firefox , when i open a blank page it is supposed to show a skin but the skin disapears in less than a second, What shall be done to have the skin remain on the blan page ?
That's probably a bookmark you have saved in Favorites.
Tap bookmark icon>Favorites>Edit>Delete the bookmark -
Photoshop CC 2014 stops working after less than 30 second and shuts down
I have installed and uninstalled Photoshop CC 2014 three or four times via Creative Cloud and each time it stops working after less than thirty seconds and shuts down the program. I then installed a an older version of Photoshop CS5.1 from a CD and it works perfect. I also have Illustrator CC 2014 and Lightroom 5 installed from Creative Cloud and both work flawlessly. What can I do to get Photoshop CC 2014 working?
You have not provided any system information or crash logs, so we can't really know.
http://myleniumerrors.com/working-with-your-operating-systems-tools/
Mylenium -
I just downloaded the trial of Photoshop. Every time I try to open it, it comes up with an error message and closes less than 5 seconds into being opened. Does anyone know how I can fix this? I tried rebooting my computer and reinstalling photoshop. Thank you!
i7 is quite fast. that's what i am on too. You may need to
It would be necessary that you have to use "Adobe Creative Suite Cleaner Tool". (see Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 )
The order varies depending on your individual needs:
1. Maybe you have to activate/deactivate, so please have a look there:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
2. Sometimes, we know in the meantime, the "opm.db file" is the culprit. In this case you should delete it.
3. Did you already try "uninstalling and re-installing"? Be careful with (de)installing aso. by (de)installing by your own resources. As much as I regret it and as strange as it may seem I fear it's a challenge for Adobe's Creative Cloud Cleaner Tool. Sometimes - for whatever reasons - CC doesn't "want" to work. In this case you should CC completely delete and reinstall by help of Adobe Creative Cloud Cleaner Tool. (A try to uninstall by own resources is not enough!)
I quote: Adobe Creative Suite Cleaner Tool helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3-CS6) applications. The tool removes installation records for prerelease installations of Creative Cloud or Creative Suite applications. It does not affect existing installations of previous versions of Creative Cloud or Creative Suite applications.
Please use: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html and follow the prescribed sequence of operations
4. If necessary and for further questions click through http://helpx.adobe.com/contact.html or http://helpx.adobe.com/de/contact.html or
Det finns också ett svenskt språkiga chatt. http://helpx.adobe.com/se/contact.html and if "open" please use chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help. -
Warning screen pops up for less than a second then disappears
After I upgraded to Mountain Lion, occasionally a warning screen with the yellow '!' pops up for less than a second then goes away. What does trhis mean, does anyone else have this problem?
Never seen it - never heard of it. Does it popup while you're using any particular application? Is it like a dialog box? It could be some third-party application trying to warn you... about something.
Clinton -
Changing web server refresh to less than one second
I just set up another PC on our network to display our engine test VI. Is there any way to increase the refresh rate to less than one second. I tried entering .5 sec on the config screen, but it changed back to one second. I'm using LabVIEW 8.5.1.
Thanks,
Todd Munsell
Wood Group Pratt & Whitney Industrial Turbine Services
Todd Munsell
Turbine Engine Test Technician/IT Tech
Wood Group Pratt & Whitney Industrial Turbine Services, LLC
Plattsburgh, NYThanks again. I'll try that.
BTW, I just spoke with out rep from Daytronic Corp. who was testing the comm cards with his System 10 and PC. They worked fine for him. The only difference is that he is using LabVIEW 7.0 and we are using 8.5.1. They don't have any subVIs written for the newer LV versions. That may be the cause the the issue we're having with using the comm cards to access the DAQ. They do not have the time or money to update their subVIs for the newer LV versions, but I'd have to think that there is a way to change them myself to make them work. Ideally, I want to use a modified version of the app I'm using on another PC without having to bother with the network to pass the data. I already have a cable made to connect the other PC to the System 10.
I almost forgot something.... I found a version 8 System 10 subVI package using the NI search, but it didn't work either.
Do you know what might have changed in the newer LV versions that could cause this issue? I've attached a zip file of their subVIs. Like I mentioned earlier, LV works fine using the main (built-in) comm port on the System 10 DAQ. It's just the additional cards that do not work correctly. They seem to establish the comm link OK, but the binary data that the System 10 sends is not interpreted and displayed correctly. It's usually all gibberish on the screen.
Of the Daytronic subVIs, the subVI that I use to test with is the "example.vi", which is used for binary data.
The "simple terminal" subVI works fine, but I can't use it to test the data link since it's configured differently.
When I use the main System 10 comm port, the simple terminal doens't work and the example.vi does. Why wouldn't it work with the other ports/cards?
Could you please check these out when you have the time and see if you can find something that isn't configured correctly? I may be overlooking something obvious, since I'm still learning LV.
Thanks
Message Edited by tmunsell on 07-28-2008 09:18 PM
Todd Munsell
Turbine Engine Test Technician/IT Tech
Wood Group Pratt & Whitney Industrial Turbine Services, LLC
Plattsburgh, NY
Attachments:
labvdr7.zip 891 KB -
Firefox Crashes in less than 5 seconds after opening it, randomly.
Here's my problem.
When I load firefox, 3 to 4 times in a row it will open, and then simply vanish in less than 5 seconds. Then the next time I try to open it - It works. WTF?
It won't even give me a Crash screen, It just vanishes.
Sometimes even, It just hangs at the homepage, to which I have to C.A.D. it.
This is happening all the time and its really getting annoying. I open a page, it crashes, repeat, repeat, repeat, and then success.
I am running a freshly installed Windows XP home 32bit, with all drivers and updates installed, blah blah blah...
Using Firefox 4.0.1
Things i have tried:
Opening multiple Firefox windows at once from the desktop, and regardless of how many, it crashes.
Changed my home page to alternative sites ( Google, Youtube, Hotmail etc.)
Made sure firfox was up to date, including all add-ons.
Tried disabling addons
Tried running firefox in safemode.
Tried running firefox in safemode, with add-ons disabled.
Re-installing firefox, with and without updates.
Tried it on a friends computer, clean install without add-ons and it worked.
Hitting my computer ( lol, j/k )
Im quite fed up with this. I've never had this problem with any versions previous to 4. Yes, that means V4 did this to me as well.
The times I can get Firefox started, I have no problems at all, Its smooth sailing.
Everything else on my computer works great, so I'm sure it is just firefox.
Anyone have any ideas?Firefox is likely to be [[firefox hangs|hanging]] rather than crashing, which explains why you get no crash reports.
The problem is likely to reside in your [[profiles|profile]] which is why reinstalls and [[safe mode]] do not help, but using a friends computer's Firefox works.<br/>(using a new clean profile would also be expected to work but may not be the simplest thing for you to do<br/> - and you could loose access to some data)
The ''"CAD"'' approach in XP will start task Manager that may be used to kill the process that is a one off solution to [[Firefox is already running but is not responding]] you will need to follow up to figure out why it is hanging repeatedly.
Follow the links I have posted, and further links in those articles if necessary, the articles should explain the problem and how to resolve it better that I could. Post back with how you get on.
If it turns out it is crashing you will need to look at [[Firefox crashes]] and follow up for a crash signature.
Good luck.
Maybe you are looking for
-
Does anyone know how I can add events to my desktop ical when the message I receive says that the calender was created by Mail I do not know how this happened. I managed to synch and change this some months ago but I do not know how!
-
Would like to use meld to reverse pacdiff
i have a command line only server, what i did/want to do, is move http.conf to httpd.conf.old and then move httpd.conf.pacnew to httpd.conf then run a "pacdiff" on it, guess pacdiff uses "meld", and move only my edits over to the new conf file. i ins
-
Hi, Which one to go ABAP-HR or func HR??? which has good future???? Thnx in adv Regards, Praveen.
-
Starting SDM Server in integrated mode
Hi, I am trying to start the SDM Server after upgrading to SP17 but the server doesnot start in the 'integrated' mode. The reply I get is the following "SDM server not up after 55 seconds. Waiting for another 5 seconds". It is starting in the 'standa
-
NI-488.2 ver 1.7 won't reconginize the card. I got the card to work in an older PC with the original PCI bus. NI's answer was to use a different OS like Win 98. The application I'm using requires NT 4.0. Any suggestions? I followed the installation p