IWeb password removal problem

I originally set password protection for my site via the function in inspector. I wanted to remove the password protection, so just unchecked the checkbox, made sure it was removed from all pages, saved and republished ...
... it didn't work!
Reading other threads here, I then emptied my cache, but that didn't fix it. I also asked somebody else who'd never accessed the site before to try accessing it, but it asked them for the username & password too!
Can anyone help me fix this?

Did you try "Publish ALL to .Mac" in the file menu?

Similar Messages

  • Password removal problem

    ok, so a while ago i added a password to my page, and published it, and all was good. now i want to remove this password, and when i uncheck the box that says "make my site private" and take out the password and username and publish it, it still ask for the password when i go to the site, even though i clicked publish and had the password box unchecked. How can i make it to request not username/password??

    dkgardner,
    try emptying your cache!!!!
    max

  • IWeb passwords for Safari...

    I have two iWeb password protected websites for my Daughters, however when I try to log into them from my iPad, Safari does not remember the username or passwords for either of the sites.
    When I log into these sites from my iMac, I have no such problems with Safari.
    Anyone have any ideas how to resolve this ?.

    MacMiner wrote:
    I have two iWeb password protected websites for my Daughters, however when I try to log into them from my iPad, Safari does not remember the username or passwords for either of the sites.
    When I log into these sites from my iMac, I have no such problems with Safari.
    Anyone have any ideas how to resolve this ?.
    Easy fix, I think. Go to Settings, Safari, AutoFill, Turn on "Names and Passwords."
    Now, not all websites allow the password to be remembered, especially banking sites. But this should work for you.

  • Password Removal

    Sorry for this...  found some answers to the problem.  Nothing doing on the password removal eh?
    Message Edited by Novatron on 08-11-2005 02:22 PM

    Lets start with the BIOS.
    After 3 failed passwords you will receive a code.
    Post that code
    I can generate the master for you.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

    Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

    I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
    On the password and keychain issue that your post is all about.  I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
    The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
    Two tips I can share, at least with webmail access:
    1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
    2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
         I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
    Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
    BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
    From my experimentation, here's my observation:
    1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
    2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
    The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

  • Reset Iweb password

    How do I rest my Iweb password or retrieve the password.  It won't let me publish my site and won't accept my password.

    Try this:
    go to the System/MobileMe preference pane and log out of MMe.
    login with a bogus username and password like "test" and "test". This clears the caches.
    login with your correct username and password, launch iWeb and try again.
    OT

  • I lost my iWeb password and don't know how to retrieve it.

    How can I retrieve my iWeb password?

    Hey Eth. The password I'm referring to is on the Site Publishing Settings page, in the FTP Server Settings section.The password is there now, but in 'dots.' I just don't know what it is. I would like to retrieve it in case I ever loose it.

  • Mail outgoing password security problem

    IMac, 10.9.5, Outgoing mail will not work, password security problem, with all mail accounts.

    password security problem,
    Can you provide more details on this?
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

  • BIOS password removal on Tecra M11-11M

    I have a Toshiba Tecra M11-11M which has been password locked. I have stripped the notebook and removed the BIOS battery for 10 min but the password still remains ie on the screen it still reads PASSWORD- ****.
    There is no way to enter the BIOS via any key combination.
    There are no markings or letters on the motherboard whatsoever ie: C35-C36 or J12-J13 to short out which would in most cases remove the password and allow access to the BIOS.
    Any techies out there with any ideas would be much appreciated.
    Some people asking for help with a bios password are not thieves but just forgetful fools.

    As far as I know Toshiba uses several methods for BIOS password removal. On business machines like Tecra or Portege the method is not the same as on Satellite models.
    BIOS battery removal maybe works on desktops but not on mobile machines.
    Mobile machines must have better protection due to fact that can be pretty easy stolen and it is very important to prevent fraudulent use.
    > Some people asking for help with a bios password are not thieves but just forgetful fools.
    Thats correct but you cannot expect that BIOS password removal method will be described on public forum. Contact nearest Toshiba service provider and they will do this for you. All you must do is to show valid bill and prove that you are real owner of this Tecra machine.

  • Power on password removal?

    I have a laptop toshiba with password power-on.
    How I remove it?
    I tried all kinds of generic tricks to remove it but no solution is there please help me.....
    Thanks.
    [ admin edit of subject ]
    plant contractor Texas

    A power on password is called a Bios password. You can go into the Bios and set it. Depending on the computer, there maybe just a user password or a supervisor password too. The password is there to prevent unauthorized people from accessing your computer or seeing your files. You can get the Bios password removed by going to a Toshiba Authorized Service Provider and having one of their Toshiba-trained techs remove the password. Two things to keep in mind. One, removing a Bios password is not covered under warranty, so expect to be charged. Two, have some sort of proof that the computer belongs to you. If you bring a computer and "can't remember" the password, how does the tech know that it wasn't stolen? 

  • RE: SAFARI 6.0 Preferences, Passwords Table - ENTRY Removal Problem.

    In SAFARI 6.0 Preferences, Passwords, I can NOT remove one entry:
    Website - https://www.google.com
    User name -
    Password - ………..
    [the named e-mail account is long dead]
    How do I get rid of this entry?
    Thanks,
    G Bracewell
    <Email Edited by Host>

    Not quite the answer, but your answer prompted me to think of a previous Open Office problem I had, where a person showed me how to fix such. I was taught how to see the the Library folder, which is hidden in Lion.
    I used the Go command   [entry: ~/Library]   to see the 'hidden' Lion Library.
    There I cleaned out the OS X keychain file. MY PROBLEM SOLVED!
    Cheers,
    G Bracewell

  • IWeb Url Username and Password protection problem

    After renewing a GoDaddy site and re-forwarding an already created iWeb site, I now get a .Mac required User Name and Password. What happened.? I just re-forwarded the url string that was already there on my .mac server.

    Hi Robert
    I am no expert but I just did a web site as well. If you want to protect it in IWEB click on your welcome page and at the bottom of the page you have a menu selection click on the icon for the inspector. looks like an italizised I then click over the menu option at the top of that that says password. you should be able to do it that way. good luck marty

  • IWeb site update problem-app missing images/files, but site is ok

    I created and uploaded a web site to my .mac (yeah, MobileMe) and it displays just fine. I have visited it from a couple of different comps. The problem is that I want to add/update files/pages, but when I open iWeb, several of the images/audio files do not display: shows a x-through and a centered question mark. They are in the sites idisk folder and in the laptop's copy of the files. When I try to replace the missing images/files by dragging onto the iWeb drafting page the following message appears: "the file can't be used because you don't have access privileges, or because it contains no content or was corrupted."
    I'm afraid to make any updates for fear of losing what is already published.
    Extra info: have family pack and am switching between .mac accounts because iWeb published to the iDisk corresponding to the account/sub-account you are logged into (BIG pain in the ***! It should have a password protected account toggle like Panther used). I have double-checked that the files for this site are only in the one iDisk account (am redirecting my masked domain url to the .mac iDisk server-works great.
    Any ideas?

    The upgrade from '06 to '08 which changed the domain.sites to a domain.sites2 caused more confusion, disasters and lost web sites than the bug ridden introduction of '09.
    I ended up rebuilding all my sites from new, blank domain files in '08 and the conversion to '09 went OK apart from '09's nasty habit of changing media file links.
    Fortunately, I have very little QuickTime content and don't use the iWeb Photos, Albums Blog or Podcast templates.
    Most iWeb built sites look pretty awful when users stick to the default page width. I start from a Blank, Black or white page and trash everything on it.
    I use the "standard" 980 px page width and most, if not all, of the iWeb themes do not adapt to this.
    This is why I constantly ask the question. "Do the iWeb developers actually build any websites with the application?".
    Perhaps if they did, we would get more bug free releases and some of the features that "real life" users are requesting.

  • Need Solution for iWeb/QuickTime viewing problem in IE 6 for Windows

    When viewing an iWeb page in IE 6 for Windows with a background picture and a QuickTime movie embeded, the QT movie frame will "smear" when the page is scrolled. More specifically, The QT movie frame will not lock into its proper position as long as the page has a background picture selected in iWeb when viewing w/ IE 6 for Windows. Does anyone know of a solution for this? Does this problem still exist w/ later versions of IE for Windows?
    By the way, if you don't already know this, changing the Page Background setting back to the default of 'Color Fill' in iWeb and republishing will not correct the problem once a background picture is selected for a page. You have to set the Page Background setting to 'None' and republish. The movie frame will then be locked into place when scrolling the page in IE 6 for Windows.
    MBP 17in (1 GB RAM), PB G4 15in, PB G4 12in, iMac G3   Mac OS X (10.4.7)   Loyal to Apple since the Apple ][+

    Someone else posted that you may have to remove the image altogether, publish, then place the replacement image. The images for the background of my newest pages use this as a tiled background successfully.
    http://web.mac.com/makentosh/iWeb/tipsfromtheiceberg/Images/background.jpg
    I'm not sure how well tiling would work on your page though since it would begin to repeat vertically when you don't want it to (for me, tiling is exactly what I needed).

  • WHAT UP? iWeb password required on every page??

    I've been building a password protected iweb site for 2 months. I've been able to publish then check my pages by only entering my password for the welcome page. As of tonight I'm being asked to enter my name and password for every page I open (using Safari). This is nuts!! I have no media that's on the pages. How do I keep my site password protected and get rid of this stupid page by page prompt?? I don't want to save my password during construction because I want to see what users will get bombarded with. HELP!!!
    Message was edited by: Lj Rose

    I'm having the same problem: starting this morning my .mac iWeb site repeatedly asks for a password for the pages I try to access. Many times it will not accept the password even though it is correct. This is the first time I've had this problem, even though I've been building a password-protected site for several months now. Also, another symptom of something wrong with .mac (or the new update for Safari, perhaps?) is the pages on my site are frequently loaded incorrectly, with elements missing (replaced by question marks). In the Activity Window it gives "Can't find host" as the reason. The problem seems to be with Apple's servers, since I'm having the same problem with all my computers.

Maybe you are looking for