J2sdk 1.4, Redhat RPM, specify install directory?

Hi,
I need to install the 1.4 sdk to a software repository that requires I install it to '/usr/local/java', and the rpm installs to /usr/java. I tried using --relocate, but it says it's non-relocateable. How can I accomplish this? symlinks are not a viable alternative in this case!
Thanks.

Thanks for the reply. However, It appears that BOTH
downloads for redhat are, in fact, rpm's. Downloading
the tar file results in getting a '.bin' file, which,
when run, simply produces an rpm! ???Nope... the one you want is a download from the row "Linux GNUZIP Tar shell script". That one will, when run, create a directory in the current directory called j2sdk1.4.0. :-)
It's not Red Hat specific, but there should be no problems getting it to work in Red Hat.
Bhav

Similar Messages

How do I specify JDK install directory for JDK 1.6 (silent install)

How do I specify the JDK install directory (on Windows, and on other platforms) using silent install parameters?
I know how to specifry the install directory for the "public install directory" for the JRE, but what about the JDK directory? I don't want to put it on the "C" drive .

I know the answer.
You can use something like this: jre-6-rc-windows-i586.exe /s INSTALLDIR=D:\java\jre
Then JRE is installed into D:\java\jre
For more information, please read: http://java.sun.com/javase/6/webnotes/install/jre/silent.html
Best wishes.

Virtual Box install - directory path?

Dear Experts,
64 bit Server is:
lsb_release -a
LSB Version: :core-3.1-amd64:core-3.1-ia32:core-3.1-noarch:graphics-3.1-amd64:graphics-3.1-ia32:graphics-3.1-noarch
Distributor ID: EnterpriseEnterpriseServer
Description: Enterprise Linux Enterprise Linux Server release 5.5 (Carthage)
Release: 5.5
Codename: Carthage
uname -a
Linux black.testrac.com 2.6.18-194.el5 #1 SMP Mon Mar 29 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
I'm trying to install Virtual Box.
It's been quite the soap opera so far.
rpm -qa | grep -i "virtual"
VirtualBox-4.1-4.1.8_75467_rhel5-1
/etc/init.d/vboxdrv setup
Stopping VirtualBox kernel modules [ OK ]
Uninstalling old VirtualBox DKMS kernel modules [ OK ]
Trying to register the VirtualBox kernel modules using DKMS[FAILED]
(Failed, trying without DKMS)
Recompiling VirtualBox kernel modules [FAILED]
(Look at /var/log/vbox-install.log to find out what went wrong)
cat /var/log/vbox-install.log
Makefile:172: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.
So I downloaded and installed the kernel source files.
For any other poor souls, you can find many source kernels here:
http://oss.oracle.com/el5/SRPMS-updates/
rpm -ivh kernel-2.6.18-194.el5.src.rpm
1:kernel warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
########################################### [100%]
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
cd /usr/src/redhat/SPECS
ls -l
total 820
-rw-rw-r-- 1 root root 834836 Mar 29 2010 kernel-2.6.spec
file *
kernel-2.6.spec: ASCII English text
rpmbuild -bp --target=noarch /usr/src/redhat/SPECS/kernel-2.6.spec
+ echo 'Patch #20207 (xen-vtd-ignore-unknown-dmar-entries.patch):'
Patch #20207 (xen-vtd-ignore-unknown-dmar-entries.patch):
+ patch -p1 --fuzz=2 -s
+ exit 0
ls -l /usr/src/redhat/BUILD
total 4
drwxr-xr-x 6 root root 4096 Jan 8 20:37 kernel-2.6.18
ls -l /usr/src/redhat/BUILD/kernel-2.6.18
total 20
drwxr-xr-x 2 root root 4096 Dec 6 2007 config
-rw-r--r-- 1 root root 3161 Jan 8 20:37 Config.mk
drwxr-xr-x 21 root root 4096 Jan 8 20:37 linux-2.6.18.noarch
drwxr-xr-x 19 root root 4096 Sep 19 2006 vanilla
drwxr-xr-x 8 root root 4096 Dec 6 2007 xen
I made a link:
ln -s /usr/src/redhat/BUILD/kernel-2.6.18 /usr/src/linux
/etc/init.d/vboxdrv setup
Stopping VirtualBox kernel modules [ OK ]
Uninstalling old VirtualBox DKMS kernel modules [ OK ]
Trying to register the VirtualBox kernel modules using DKMS[FAILED]
(Failed, trying without DKMS)
Recompiling VirtualBox kernel modules [FAILED]
(Look at /var/log/vbox-install.log to find out what went wrong)
cat /var/log/vbox-install.log
Makefile:175: Warning: using /usr/src/linux as the source directory of your Linux kernel. If this is not correct, specify KERN_DIR=<directory> and run Make again.
Makefile:190: *** Error: unable to find the include directory for your current Linux kernel. Specify KERN_INCL=<directory> and run Make again. Stop.
Surprise!
Question:
Did I install the kernel source correctly, or not?
If so, what is the correct directory to use for: KERN_INCL=
Thanks a lot!

Actually yes, I did read the docs. Shall we say, the docs and the error messages could use some improvement.
ie.
xen is not mentioned at all in the install page. Nor in the table of contents.
Since dkms was "recommended", and the error messages referred to it, I spent a lot of time searching for that package.
You can see all the struggle I've been doing.
It's very highly doubtful I could have installed this without your answers.
Thanks a lot for your help!

How to specify source directory in File sender adpate using (NFS)?

Hello experts,
I am doing File-PI-Proxy scenario.
Input file is available on machine which is within the Network area and FTP is not available on that machine.
For this reason I am using the NFS Transport Protocol.
In ID File sender I have specified Source Directory:-
IP Address\Directory
I am geeting the Error in RWB as 'Configured source directory '
IP Address\Directory' does not exist'.
Please suggest how to specify the Source Directory path.
Regards,
Jagesh

Hi,
If you want to use NFS protocol, then the file needs to be within the a folder in the XI server and not outside it, In your case if you need to use the file in a different machine which is on a network then try to use the FTP protocol.
Refer this blog:
/people/shabarish.vijayakumar/blog/2006/08/01/along-came-a-file-adapter-mr-ftp-and-rest-of-the-gang which shows the details of how you can install a local FTP and use it
Regards,
Nithiyanandam
Edited by: Nithiyanandam A.U. on Mar 18, 2009 10:43 AM

How to use the cgicmd.dat to specify a directory name for desname

Hi folks,
What I'm trying to do is use a command key to specify the directory for a file, specified via desname. Here's an example.
cgicmd.dat
custom_reports_dir: /some/directory/custom_reports
Then I want to reference it via something like this..
http://server:7777/reports/rwservlet?cmdkey=rpt_connect&destype=file&desname=custom_reports_dir/test.pdf&desformat=pdf
Where in the above example, I'm trying to use the command key to specify a directory name, and then append a file name to it. It isn't working for me, is this possible to do? I figure since it's not an argument in itsself, it's being interpreted literally, rather than being substituted for the parameter.
Thanks very much,
-Adam vonNieda

That depends on how you actually run your program in the first place. If you just use a batch file you could simply make the path to the javaw.exe relative (e.g. jre\javaw.exe �cp lib\myJar.jar com.MyClass). Or you could look into some third-party software that allows you to create installations packages for Java. I have used Zero G's InstallAnywhere before and they have support for you setting up their executables to use a bundled jre. I am sure all the other java install makers have similar functionality.
Lance

Patching WebLogic server - Unable to locate the specified product directory

We are trying to apply the October CPU patch to our WebLogic 10.3.6 installation on Windows Server 2003. However, when we run the below command:
bsu -install -patch_download_dir=E:\ofm11g\utils\bsu\cache_dir -patchlist=BYJ1 -prod_dir=E:\ofm11g\wlserver_10.3
We receive this error:
Unable to locate the specified product directory.[E:\ofm11g\wlserver_10.3]
That directory is valid. We are running two instances using this WLS installation - Oracle Reports 11.1.1.6 and Oracle Portal 11.1.1.6. We are trying to apply the patch with the same user that installed the software.
I was able to successfully run this command on a different server that runs Oracle Internet Directory 11.1.1.6.
Any ideas?

I was able to fix this by ensuring that E:\ofm11g\wlserver_10.3 contained two files: .home and .product.properties. After I copied these from a different server and edited to fit my environment, I was able to successfully install this patch.

Uek-rpm-config rpm similar to redhat-rpm-config ?

I'm new to Oracle Linux and have installed OL 6.2 and booted in UEK kernel 2.6.32-300.3.1.el6uek.x86_64.
I'm building the Qlogic FC driver qla2xxx against the UEK kernel using the spec file.
But the driver is built for kernel version 2.6.32-200.el6.x86_64.
This is because the macro %kernel_module_package in the spec file picks up information for 2.6.32-200.el6.x86_64 kernel.
Any idea if uek-rpm-config rpm is available similar to redhat-rpm-config so that the driver is built for the correct UEK kernel version.
Any other pointers on how to get this resolved.
Thanks in advance.

Here are some more details of what I’m doing and need more info about.
I want to update the qla2xxx driver, for new upcoming hardware, for UEK in Boot from SAN (BFS)
Environment.
For this purpose I’m using ddiskit, which is kernel driver update tool and can be found at below link,
http://dup.et.redhat.com/ddiskit/
Since Oracle Linux has two variants of kernels installed, in my case they are,
2.6.32-200.el6.x86_64 and 2.6.32-300.3.1.el6uek.x86_64.
Here the qla2xxx driver dd.iso is generated using ddiskit for 2.6.32-200.el6.x86_64.
Using this dd.iso I’m able to boot from a SAN disk.
Now I want to prepare the dd.iso using ddiskit for 2.6.32-300.3.1.el6uek.x86_64.
Here is where I need more info.
1. Can ddiskit be used for UEK kernel for BFS environment the way it can be used for Redhat Linux kernels.
2. If ddiskit is not supported for UEK then what is the recommended method to update the driver for UEK in BFS environment

Unable to install Directory Sync tool in windows server 2008 R2 Eneterprise

Hi,
I am unable to install Directory Sync in windows server 2008 R2 Eneterprise.i have joined my machine domain joined computer running Windows Server 2008 r2 enterprise,when i click dirsync.exe then gives below Error.
The Windows Azure Active Directory Sync tool must be installed on a domain joined computer running Windows Server 2008 Service Pack 2 or later,or Windows Server 2008 r2 Service Pack 1 or later
Please help on this why this happing when i try to installed DirSync software.
Regards
Anil Kumar

Hi,
have you already installed .net framwork 3.5 and 4.5.1 on that machine?
http://technet.microsoft.com/en-us/library/jj151831.aspx
Also make sure that you run the install command from an elevated command prompt.
Hope that helps,
Lutz

Is there a way to create a new directory or file in application install directory programatically

Hi to all,
Is there a way to create a new directory or file in
application install directory programatically.
I want a xml file to be created with in the application
install directory programatically(not the application storage
directory)
I have used the following code snippet:
var file:File = new File();
file = File.applicationDirectory;
file = file.resolvePath("assets");
if(!file.exists)
file.createDirectory()
I am thrown an exception when using this .....Security
Exception

Thanks, but my main problem is to delete the locally stored
data that is stored in the application storage directory when the
application is uninstalled.
The data is not being deleted automatically when the
application is uninstalled, thats why I want to write some file to
application directory.
My application is remembering the login username and password
even I uninstall the application and reinstall the next
time.

In past versions of CVI, using OpenFile with no path meant to look in the local path (in other words the install directory). Is there a way to do this in CVI 2013?

I use an .ini file to allow the users to change the bootup preferneces for the program. In the past that file lived in the install directory and OpenFile could cheerfully find the file and apply the preferences. In CVI 2013, the program seems to need an implicit path to the file. Is there a way around this?
Solved!
Go to Solution.

I'm not using CVI2013 yet, but in any case you can build up a full pathname for a file in the application folder using GetProjectDir and MakePathname commands at runtime.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

J2sdk-1_4_2_01-linux-i586-rpm.bin

Hi,
Can i have the link to download j2sdk-1_4_2_01-linux-i586-rpm.bin
Plz help me.

Hi,
Can i have the link to download
oad j2sdk-1_4_2_01-linux-i586-rpm.bin
Plz help me.hello

ScriptUI get path to indesign install directory

Does anyone know if there is a way to get a users path to their install directory?
I have script, that creates a new menu item when Indesign starts up. the menu item is clicked, it opens another script.
Right now, I have the path to the second script hardcoded, which works fine:
     C:\Program Files (x86)\Adobe\Adobe InDesign CS5.5\Scripts\Scripts Panel\DM_Core\DM_RemoveMenu.vbs
but now I have to give this to other users, and I need to know if there is some way to get the installation path that they have to their indesign.
Ultimately, what I would like to get is this:
     C:\Program Files (x86)\Adobe\Adobe InDesign CS5.5\Scripts
I have tried scriptsFolder but that doesn't take me to the right place.
Anyone have any ideas.
Thanks,

This should get you what you want:
function GetScriptsFolder (){
          var scriptsFolder = null;
          do{
          // On Mac this is a folder inside the app package
                    var appFolder = Folder.startup;
                    if (! appFolder.exists){break;}
                    scriptsFolder = Folder(appFolder + "/Scripts");
                    while (appFolder.exists && ! scriptsFolder.exists){
                              appFolder = appFolder.parent;
                              scriptsFolder = Folder(appFolder + "/Scripts");
                    if (! scriptsFolder.exists){
                              scriptsFolder = null;
                              break;
          while (false);
          return scriptsFolder;
Harbs

How to get Operating systems Install Directory in Java

Hey Friends
I have a problem of getting to know Operating System Install directory in java for my application requriment.Can any body tell me how to know this or send me snippet of code
THANKS

Thanks for ur reply but i need to know the Operating System Install directory like c:\Windows & not the jre install directory.Your solution gives the jre installation dir.
Any suggestions ?
Thanks & Regards

Problem to install Directory Server 5.1 SP2 on Solaris

Hi
I need to install Directory Server 5.1 SP2 on Solaris 8. When I was asked to provide system user and system group, I provide "root" and "system". As a result, the installation fail message was shown and abort the installation.
However, I was install the Directory Server 5.1 SP1 on solaris 8 successfully by using "root" and "system". Does anybody know why?
Thanks and Regards,
William Siu

But i've more than 2 Go of free disk space !!!!
"Tim Muratet" <[email protected]> wrote:
>
Sure...Get more disk space.
"coolys" <[email protected]> wrote in message
news:3a252a26$[email protected]..
hi,when i decompress the weblogic510.exe file under NT, in the end of theself extracting i have the message below :"The decompression of %s failed.
there may not be enough free disk space available in the TEMP"Can anybody
help to resolve this problems.thanks for yours reponses.

RedHat 7.0 Install Problem

Has anyone been able to install Oracle8i on RedHat 7.0. I have gone through the necessary steps for downloading the correct jre from blackdown...setup my oracle user as stated in the installation guide...and i get the error when running the install script:
SIGSEGV 11* sementation violation
full thread dump....

glibc has been updated?
it is said that there is problem in glibc 2.2. Check your glibc, and then again.
lucky to your!
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by huang xinhua ([email protected]):
I try install oracle 8.1.6 on redhat linux 7(install type:typical)
but after install and link complete the database configration assistant start and at step 3 "initialize the database"(the progress is 80%) the OUI is not response for a long time(one hour) and setup is failure!
I try it 5 times ,so who can help me? <HR></BLOCKQUOTE>
null

J2sdk 1.4, Redhat RPM, specify install directory?

Similar Messages

Maybe you are looking for