Jabber GUest Server 10.5 Install and deploy

HI,
I try to install and deploy my first jabber guest Server 10.5 .What I see is that I should use a secure sip trunk to the ucm ? is this really needed ?,because if I use secure sip trunk I have to install certs
Could I deploy it without secure sip trunk ? and only use self cert between expressway c and e ?
Thanks for your Information
Josef

Hi Josef,
It is fine to configure SIP trunk on UCM to be non-secure.
Between C and E you just need to make sure there are CA-signed certs installed. Doesn't matter which CA, could be your own.
Hope this helps.
Mike

Similar Messages

How to Install and deploy Oracle Discoverer in Oracle AppServer 10.1.3.2

I need to know how to install and deploy Oracle Discoverer in Oracle Application Server 10.1.3.2?

Hi
Discoverer doesn't install into OAS 10.1.3.2. It uses 10.1.2.1 or 10.1.2.2.
When you install Discoverer it installs its own OAS components.
Best wishes
Michael

Jabber Guest server Local SSL certificate

Hi , trying to download a local ssl certificate from jabberguest server and issued a 'generate a new self signed certificate' request. system shows 'a certificate signing request is being created, please wait' . unfortunetly its been like that for 2 days now - even after rebooting the server it still reports the same. (version is 10.5.3.115)....any advice appreciated.....TIA , Jeff

Jeff,
I had a look at my Jabber Guest server this morning and oddly enough I found the same thing as you did. I'm not sure when the server got into this state however I can say it has been fully functional. Anyway, there are two options that you generally should have.
1) "Generate a New Self-Signed Certificate"
2) "Create a New Certificate Signing Request"
To restore these options I had to run the certificate scripts through the root of the system.
1) cd /opt/cisco/webcommon/scripts/
2) ./createcsr.sh (This is for the Cert Signing Request)
3) ./selfsigned.sh (This is for the Self Sign)
After running each script you'll need to run through the general certificate questions.
I hope this helps.
-P

Jabber Guest Server Download

Hi all,
I will install jabber guest to run a demo on a customer, where can i download the jabber guest server iso file ?
Thanks
patcbr600

Hi - the question is answered in this thread:
https://supportforums.cisco.com/discussion/12243866/jabber-guest
Mike

SAP Content Server can be installed and supported on a Virtual Machine

Hi,
I would like to know if the SAP Content Server can be installed and supported on a Virtual Machine.
Are there any sap notes to support this.
Regards,
Rajiv

SAP support VMWARE
MAXDB support VMWARE.
you are free to go.
I would ask this question in the SAP on VMWARE group at Virtualization on Windows
close message here when you created the message in the proper forum.

Install TFS 2012 Solution packages (WSP) on MOSS 2007 that already have TFS 2010 Solution package installed and deployed

Hi
I hope to place this question in the proper forum but if not, can someone move it to the right forum. Thanks
I have a MOSS 2007 farm and I have 2 TFS 2010 SharePoint extension solution package (WSP) installed and working properly for a while now.
Microsoft.TeamFoundation.SharePoint.Dashboards.wsp and Microsoft.TeamFoundation.SharePoint.wsp
The Application team is going to upgrade their TFS 2010 server to TFS 2012 and want me to installed the new TFS 2012 SharePoint WSP solution to our MOSS farm.
My Question is that do I have to uninstall TFS 2010 solution package first or can I installed the new TFS 2012 solution packages in addition and both TFS 2010 and TFS 2012 solution package will co-exist and will work properly?
the reason i want to do this is making sure all existing TFS 2010 will still work. My concern is if I have to uninstall TFS 2010 solution just to get TFS 2012 solution then run into problem with existing TFS 2010 projects.
Thanks in advance for any advice or insight on this.
Swanl
Swanl

Hi Swanl,
you may check on the prequisite in sharepoint products,
"SharePoint Products: If you have a portal server, you might have to upgrade it to continue using SharePoint integration. We no longer support Windows SharePoint Services 3.0 or Microsoft Office SharePoint Server 2007. See
SharePoint Products requirements for Team Foundation Server."
Supported versions, editions
SharePoint Foundation 2013¹
SharePoint Server 2013,¹ (Enterprise or Standard edition)
SharePoint Foundation 2010²
SharePoint Server 2010,² (Enterprise or Standard edition)
http://msdn.microsoft.com/en-us/library/hh667648.aspx
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Can't log in to server following SP install and configuration

Good morning! I’ve got an interesting one that’s had us scratching our heads here for the past several weeks.
We’re trying to build out a new Sharepoint 2013 farm on server 2012 (have attempted both 2012 and R2 with the same results) and have run into a problem that we can’t seem to find a solution to.
Some background – infrastructure is running Vmware 5.0 u2 on Cisco UCS with EMC VNX storage.
SQL server is a physical server 2008 R2 running on server 2008 R2.
We’re currently running other 2012 based servers in development, but none in full production yet.
All of those servers are behaving normally.
Installation steps are as follows: Deploy template and update OS.
Reboot as necessary.
Turn over to applications manager who does the Sharepoint install.
We’ve tried SP’13 RTM and SP1 slipstreamed from VLSC. Bits install ok, and server reboots.
Following the SP products and config wizard, the reboot causes the server not to be accessible.
It usually stalls on “Please wait” and/or “applying Group Policy registry,” which if you wait long enough will actually get to a login screen.
When you log in, it stalls on please wait for the user profile service.
We’ve left it here over a weekend and had no change. In the event log, we see a 6005 group policy waiting error, but never a 6006 with the timeout.
Yesterday I dug into it with a snapshot of the offending system.
What I found is that if I go in and remove all accounts from the local group policy|log on as a service, the server will allow logins.
With us running a Sharepoint farm with a remote SQL server, some of the SP services need this right, and we have other accounts in group policies from other applications that need to be there for ease of use.
Anyone run into this, and if so, do you have a workaround or solution that I can try?
Thanks,
-brad

Are you able to provide the output of gpresult when the machine is experiencing issues? Understand if you are not able to as it may reveal sensitive information.
Do these servers have Internet access (as in, can they access http://crl.microsoft.com)? I'm wondering if SharePoint's need to do CRL checking is causing an issue.
http://blogs.msdn.com/b/chaun/archive/2014/05/01/best-practices-for-crl-checking-on-sharepoint-servers.aspx
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

AIA Installing and Deploying Demo Application failed:Build.xml not found

Hi,
i am trying to install demo application using following steps
Extract Foundation Pack Demo under <AIA_HOME>.
If not already done so, set environment variables:
For Linux (bash shell)
source <AIA_HOME>/aia_instances/<aia_instance>/bin/aiaenv.sh
For Windows
Navigate to aiaenv.bat located in <AIA_HOME>\aia_instances\<aia_instance>\bin
Run aiaenv.bat
You may have to assign higher memory values in your JVM parameter settings for demo to deploy if you have not set the maximum possible value already. Use the following three steps as guidance to configure JVM parameters:
Navigate to <Middleware home>\user_projects\domains\<domain_name>\bin
Update the following parameter in the setSOADomainEnv.sh (for Linux) and setSOADomainEnv.cmd (for Windows) file:
USER_MEM_ARGS=""-Xms2048M -Xmx2048M -XX:PermSize=256M -XX:MaxPermSize=512M -Xmn1228M -XX:SurvivorRatio=10""
Note: These are recommended values while using Sun JVM. Actual values that you set depend on your system configurations. When running on dedicated hosts, you can set the JVM heap size as high as possible. Higher value results in better performance. However this number is constrained by the operating system's addressable memory space.
Restart SOA server
Run the deployment script:
At the command line prompt, run the following command for your platform:
For Linux:
cd $AIA_HOME/samples/AIADemo/config
ant -f deployDemo.xml
For Windows:
cd %AIA_HOME%\samples\AIADemo\config
ant –f deployDemo.xml
while runiing the deployment script it showing build.xml not exist..
Error Details
D:\Soasuite\oracle\Middleware\SOASuite11gR1PS4\oracle_common\samples\AIADemo\con
fig>ant -f deployDemo.xml
Buildfile: build.xml does not exist!
Build failed
Any suggestions
Thanks in advance

Hi
This is the location i am having my installation because in this location only MY AIA instance got created.
Here i am pasting my env variable setup in aiaenv.bat file
#set environment variables
set AIA_HOME=D:\\Soasuite\oracle\Middleware\SOASuite11gR1PS4\oracle_common
set MW_HOME=D:\\ORACLE\Middleware
set SOA_HOME=D:\\ORACLE\Middleware\Oracle_SOA1
set JAVA_HOME=D:\ORACLE\Middleware\jdk160_24\jre
set AIA_INSTANCE=%AIA_HOME%/aia_instances/AIAinst1
kindly help...

OS X Server 3.01 Install and File Sharing Problem(s)...

Greetings...Apologies in advance for the lenght of this post...but I wanted to provide as much info as possible to the community to see if someone can see what I may be doing wrong.
My goal: Replace an existing iMac running Mavericks Server v3.01 that I use for Open Directory & file sharing with a new Mac Mini Server (late 2012) running Mavericks Server v3.01. Once new server is working and users defined...I will copy the users data from the iMac to the mac Mini server...then re-purpose the iMac as a simple client (bound to the new Mac Mini server).
Before we get to what I have been trying...I guess I should ask a few basic questions:
Can you have 2 Mavericks servers on the same Local network?
Can you have 2 servers as OD Masters on the same local network?
Are there any "Best Practices" I can follow to set up the new server on a local network that already has a server on it?
Here is what I have tried:
First off...I assign a static IP address to the Mac Mini on the router and disable the WiFi on the mac mini. I am using a direct ethernet cable connection from the mac mini to the router.
Next, I intall Mavericks client and configure that. I download Sever from the App store and install it. After it is installed...I run the "ChangeIp -CheckHostName" command in a terminal window and it reports that the "Names are the same" or something to that effect.
Next up...I turn on Open Directory and set up a OD Master...using essentially all the defaults. I then turn on file sharing and set up a share for the "Users" folder and set that share to use AFP & SMB and to also use it for Home folders.
I then set up a test user as a "Local Network user" and specify that the users home folder is on the "Users" sharepoint.
Once that is done. I logoff the admin account on the server. I then go to my macbook pro and bind it to the server (Users/Login options). I see the server identified as "Mac-Mini.home", select that and it shows a green dot next to the server...which I interpret as it was bound successfully.
I then log in to the newly created network user from newly bound macbook pro. No errors are reported and I seem to be functioning fine. I can use Safari.
As a functional test (lame ... probably) I try to log in from a bound client, save a text text file to the documents folder. Log out as the user on the bound client...Then I log in as that user on the server to see if I can edit/update that same file from thedocuments folder.
However, when I launch the TextEdit app on the bound client, it appears briefly on the Dock...then crashes with a system error. I tried to read the error...but it looks greek to me. I did see something to the effect "operation not permitted...".
I logoff the bound macbook pro. go to the server and log in as that newly created local network user. I get logged in. I am able to launch Text edit when logged in as the user. I can add text...save the test file to the document folder. Everything looks good. I just cannot seem to log in as the user from both the bound client and the server and have it work normally.
So...I am obviously not doing something either in the correct order, or not configuring a service correctly...something I am doing wrong.
Any suggestions are appreciated.

A NAS should work. A proper file server will cache active files in memory. So it's not obvious use of SSD storage will speed your service. In any case figure out how to back it up and most important how you will recover after a disaster requiring full recovery.

SQL Server Service Pack Install and SSRS Scale Out Environment

We have an error in our SSRS environment that looks to be addressed in SQL Server 2008 R2 SP3. Our set up is a scale out environment, 2 SSRS app servers and 1 SSRS database server. For simplicity as we are moving to 2012 soon, I would like to only install
the service pack on one of the SSRS app servers. Anyone aware of any reason besides keeping servers consistent to not do this? I don't want to go through the time to upgrade the SSRS SQL Server if I don't have to.
Thanks

Hello,
If you apply the service pack on the database server first, front-ends may not be able to provide service again until you
apply the SP to them too. I have no knowledge of other possible issue.
Remember to backup SSRS databases and encryption key before applying the service pack.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

General install and deployment problem with WLS clustering on two boxes

Hi,
I've come across a general installation problem with WLS with a cluster spanning two different physical machines and two Managed Servers, one Managed Server per physical machine.
The problem is, starting from scratch, you install WLS on both physical machines. You can then use the config wizard to create the domain, cluster and managed servers, but this is a manual typing in process.
So we've now got a WLST Script which we run with "java weblogic.WLST domaincreate.py domain.properties". This is good as it creates the domain, cluster, managed servers and JMS modules.
Now the trouble is, it doesn't do anything to the 2nd physical machine which will be running only the 2nd Managed Server.
One dirty way to get around this in order to start the 2nd managed server was to copy the domain directory to the 2nd server, but I'm sure this is bad practice and what you can actually do is improve the WLST script to actually, but the same as the config wizard and dump the nessary information to the 2nd physical machine in order so you don't need to copy the domain directory across so that it will startup straight after running the WLST.
Any help appriecated.
Surfbum.

Hi I think I've found the answer. You can build a managed server template using the pack command.
http://e-docs.bea.com/common/docs90/pack/tasks.html

How to install and deploy an ADF application

Hi All,
I am working on a POC and I have developed a small application by downloading Jdev 11.1.2.
Now I would like to have this deployed onto some server for client presentation.
However I am not sure of how I get the server setup(installation)
Can someone please provide me steps for installation and what are the machine requirements.
Thanks a ton.
--John.

I do not have a server yet to deploy, I need steps on how to setup the server.
Thanks
--John.

Plateform Independent Patching Process for Install and deployment

I have a requirement to download an application/patch from the content server and install in the existing jboss environment. I am looking for a Tool to create a package that can be downloaded and executed at jboss end to install any application in the same jboss container. The tool should compatible for Mac and Windows.
Please let me know if there is a way exists to do the same. Help is appreciated.
Thanks and Regards
Vishwa

Hi,
Agree with Tek-Nerd.
What's more, as the Lync FE patch of Site is 8308.857, so before you move CMS and PChat Server, please update it to the latest version of CU firstly.
Also, as you enable mirroring database, it is recommended to use the Invoke-CsDatabaseFailover -NewPrincipal Primary command, and then verify
that the primary server is principal for all databases before you run the Install-CsDatabase cmdlet.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

Installing and deploying a .webpart file in SharePoint 2013

I have a webpart that took from a SharePoint 2010 web site from its webparts library. This webpart has the .webpart extension. I downloaded it as a copy. Now I want to install it to a SharePoint 2013 site ti its webpart gallery. I tried using Visual Studio
by opening the .webpart file and copy its XML to the new empty .webpart source code. Also I uploaded the .webpart file to the Sharepoint 2013 WebPart Library. That also not successful. There was an error regarding when I insert the webpart to a page with a
Correlation ID.
The error is at the below.
Unable to display this web part. To troubleshoot the problem, open this web page in a Microsoft SharePoint Foundation compatible HTML editor such as ...........................
Correlation ID: cb3b839c-b011-e0f5-999c-31292d78623c
Then how am I supposed to do this properly. I am new to Sharepoint.
Could someone please help me to solve this matter?
Thank you,
Regards,
Chiranthaka

What web part is it? Is it a custom / third party one?
Also, more information on the .webpart structure might be handy -
http://www.wictorwilen.se/Post/Web-Part-Properties-part-3-the-webpart-file.aspx
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Nac Guest Server: SMS Optional fields and special variables

I want to include the sponsor email address in the SMS body. Is there a way to do it?
I also notice there are 5 optional fields, how do we use that fields? Cisco doco doesnt mention much about the 5 additional fields.
Cheers,

Would this help?
http://www.cisco.com/en/US/docs/security/nac/guestserver/configuration_guide/20/g_hotspots.html#wp1071198
Sent from Cisco Technical Support iPhone App

Jabber GUest Server 10.5 Install and deploy

Similar Messages

Maybe you are looking for