Javadoc not copying from doc-files directories

Until yesterday I used NetBeans 5.5 for my development projects, and then I installed 6.0. I noticed when I wanted to generate documentation for my classes, that it didn't copy the image files I have in the required doc-files directories.
I know I could copy the files manually, but that would defy the purpose with automated tools. So, can someone please tell how to make NetBeans 6.0 copy these files, so they are visible in the documentation?

I solved this by overriding the existing javadoc target, and invoking an Ant copy task.
<target name="javadoc" depends="init,-javadoc-copy-doc-files,-javadoc-build,-javadoc-browse" description="Build Javadoc."/>
<target name="-javadoc-copy-doc-files">
<copy todir="${dist.javadoc.dir}">
    <fileset dir="${src.dir}">
      <include name="**/doc-files/**"/>
    </fileset>
</copy>
</target>

Similar Messages

Postoffice-startup-file not copied from SYS-volume

We migrated a Groupwise 7.02-postoffice from a Netware 6.5-Sp5-server to a
SLES10-SP1-server with the Novell GroupWise Migration Utility.
When we started gwpoa the postoffice-startup-file was not
in /opt/novell/groupwise/agenst/share/
We looked in the migration-logfile and we saw these messages
10/27/07 02:32:23 Configuring agent(s)...
10/27/07 02:32:23 Running remote command:
sh /tmp/groupwise/software/addagent.sh -
b /opt/novell/groupwise/agents/bin/gwpoa -
s /tmp/groupwise/software/p006.poa -h /var/opt/novell/groupwise/mail/p006 -
v 7
/tmp/groupwise/software/addagent.sh: line
135: /tmp/groupwise/software/p006.poa: No such file or directory
mv: cannot stat `/tmp/p006.poa.tmp.16849': No such file or
directory
cp: cannot stat `/tmp/groupwise/software/p006.poa': No such file
or directory
10/27/07 02:32:25 Remote command failed (1)
This is were our sourcefiles were:
Post Office:
Source database path: \\fileserver\VOL1\DATA\GRPWISE\P006\
Destination path: /var/opt/novell/groupwise/mail/p006
Agents:
Post Office Agent:
Path to startup file: \\fileserver\SYS\SYSTEM\p006.poa
As you see, our startup-file was on another volume then the postoffice.
In the migration-log we only saw a mount of the postoffice-volume, so we
think there is a bug in the migration utility. It does not copy the
startup-file if it is on another volume (in this case on the SYS-volume).
Or did we something wrong?
At last we solved our problem by copying (and editing) a startup-file
to /opt/novell/groupwise/agenst/share/
Regards,
Jeroen van der Klaauw

It happens between the full dbcopy and the incremental dbcopy, when the
agent is configured.
Jeroen van der Klaauw
> When the migration agent finishes the migration of the data there are
> the second and third phases that the application runs through - 2) to
> install the agents and 3) configure them. If you bombed out before
> that third phase then I would understand...
>
>
>
> On Mon, 29 Oct 2007 15:55:53 GMT, [email protected] wrote:
>
> >We migrated a Groupwise 7.02-postoffice from a Netware 6.5-Sp5-server
to a
> >SLES10-SP1-server with the Novell GroupWise Migration Utility.
> >When we started gwpoa the postoffice-startup-file was not
> >in /opt/novell/groupwise/agenst/share/
> >We looked in the migration-logfile and we saw these messages
> >
> >10/27/07 02:32:23 Configuring agent(s)...
> >10/27/07 02:32:23 Running remote command:
> >sh /tmp/groupwise/software/addagent.sh -
> >b /opt/novell/groupwise/agents/bin/gwpoa -
> >s /tmp/groupwise/software/p006.poa -
h /var/opt/novell/groupwise/mail/p006 -
> >v 7
> > /tmp/groupwise/software/addagent.sh: line
> >135: /tmp/groupwise/software/p006.poa: No such file or directory
> > mv: cannot stat `/tmp/p006.poa.tmp.16849': No such file or
> >directory
> > cp: cannot stat `/tmp/groupwise/software/p006.poa': No such file
> >or directory
> >10/27/07 02:32:25 Remote command failed (1)
> >
> >This is were our sourcefiles were:
> >
> >Post Office:
> > Source database path: \\fileserver\VOL1\DATA\GRPWISE\P006\
> > Destination path: /var/opt/novell/groupwise/mail/p006
> >
> >Agents:
> > Post Office Agent:
> > Path to startup file: \\fileserver\SYS\SYSTEM\p006.poa
> >
> >As you see, our startup-file was on another volume then the postoffice.
> >In the migration-log we only saw a mount of the postoffice-volume, so
we
> >think there is a bug in the migration utility. It does not copy the
> >startup-file if it is on another volume (in this case on the SYS-
volume).
> >Or did we something wrong?
> >
> >
> >At last we solved our problem by copying (and editing) a startup-file
> >to /opt/novell/groupwise/agenst/share/
> >
> >Regards,
> >
> >Jeroen van der Klaauw
> Tim
> ___________________
> Tim Heywood (SYSOP)
> NDS8
> Scotland
> (God's Country)
> www.nds8.co.uk
> ___________________
>
> In theory, practice and theory are the same
> In Practice, they are different

Dear ladies and gentlemen! I recently received on my notebook, operating system 8.1, the message "Adobe Acrobat is no longer working properly". I also found myself that I can copy from einerPDF file excerpts not without problems in another document. My Ad

Dear ladies and gentlemen!
I recently received on my notebook, operating system 8.1, the message "Adobe Acrobat is no longer working properly". I also found myself that I can copy from einerPDF file excerpts not without problems in another document. My Adobe Acrobat 9 Pro has released version 9.0.0. Two updates this version is not listed. Please inform me how I can fix this problem.
Sincerely, Walter Hacksteiner
mailto: [email protected]

The first thing I would try is to update Acrobat 9 to the latest version 9.5.5
The next thing would be to run Acrobat 9 in Windows 7 or Vista or XP Compatibility Mode.

" VL 476: Item 'Official Doc. Number' is not copied from the reference doc"

Hi Guys,
When I am doing the Accrual Reversal in F.81 I am getting the following error
" VL 476: Item 'Official Doc. Number' is not copied from the reference document ".
I have maintained the number ranges also. I am not able to understand why the system is issuing this error.
Pls suggest.
Thanks
Srikanth

Hi Guys,
Can anyone please help on this error.
Thanks
Srikanth

Purchased a song from iTunes, i tried to transfer it to my itouch, but i received an error "iTunes could not copy because the file could not be converted". how do i convert the song (well, i thought it will automatically be converted)?

purchased a song from iTunes, i tried to transfer it to my itouch, but i received an error "iTunes could not copy because the file could not be converted". how do i convert the song (well, i thought it will automatically be converted)?

Problem Fixed:
Remove the song from your itunes library, then go to the itunes store and try to download it again. It will say something like "this song has already been purchased, would you like to download it again for free?". Click yes, and it will download again. This worked for me, hope it helped

Letter of Credit not copying from Quotation to Sales order

Hello,
I have attached a LC to a Quotation. When i am making an order with reference to the Quotation, the LC is not copying from Quotation to the Sales order. Kindly help.
Regards,
Shahzad

Hi,
Did you want to say that you have maintain some text in quotation and that text is not copying to the sales order some thing like that?
So I suggest you to check your setting by going to the following Tcodes.
VOTXN over there you can define the text types.
And you have to assign you text determination procedure to the order also.
If you want that text to be copied to the billing also then assign the procedure to the billing doc.
If you have assigned properly your procedure then it will copy the document.
Regards
Raj.

Item 000002 is not copied from the reference document

Dear All,
I am facing a typical problem while creating Price difference sales order w.r.t. invoice.
Document types in the system are -
Z2FC - Normal Sales order type, ZPD - Price change order type, Z2FB - Normal invoice type
My item category determination is -
Doc. type - Itm cat. gp. - Usage - Hghr itm cat - Default itm cat. - Manual itm. cat.
ZPD         -   NORM         - blank   - blank           - G2N                  - L2N
ZPD         -   NORM         - blank   - G2N            - G2N                  - L2N
Z2FC       -   NORM         - blank   - Blank           - TAN                  - TAP
Z2FC       -   NORM         - blank   - TAN            - TANN                - TAN
Copy control is -
Z2FB to ZPD for item category TAN with proposed item categories are G2N and L2N.
Z2FB to ZPD for item category TANN u2013 requirement 302 [Do not copy item]
During my Z2FC sales order creation I was having line items as follows
Item no. - Mat. code     - Qty -      Higher level item - Item category - Amount
10         - 101329          - 3     -      blank                 - TAN                - 35,000.00
20         - MC091234    - 3     -      10                      - TANN             - 0
30         - MC091234    - 1     -      10                      - TAN                - 5000
We are not using the sales BOM. I need to provide line 20 free to the customer. Hence I have manually maintained 10 in the higher level item column for the line item 20. The item category determined was TAN. Then I had changed it to TANN manually. So the amount became zero. Line 20 became the child and line 10 became parent.
At the same time customer also wishes to buy the material code MC091234. Now the material code MC091234 is of HALB type where as the material code 101329 is of FERT type. There is validation in the system that only FERT type of material could be sold and HALB type of material could be supplied as free. [With item category TANN]. In case HALB type material is also required to be sold then I need to manually maintained value in the higher level item. So I had maintained the value 10 in the higher level item column for the line item 30. The default item category determined is TAN. The invoice is also created properly. [Z2FB type]
But when I am creating the invoice correction document type ZPD w.r.t. Z2FB type invoice, I am able to get the two line items for the material code 101329 in line item 10. One each for G2N and L2N item category.
But for the material code MC091234 in line item 30, I get only one line item with item category G2N. I did not get another line item for the material code MC091234 for the corresponding L2N type item category
At the same time following messages are displayed
Message no. V1475 Item category for item 000002 cannot be determined and
Message no. V1476 Item 000002 is not copied from the reference document
Please help.
Thanks in advance
Piyush Ranpura

Dear All,
Any help???
Yet my issue is unresolved.
Thanks & Regards
Piyush Ranpura

Acrobat 11 doesn't create pdf. files from doc. files

I tried to create a pdf. file from a doc. file (Office 2003). Acrobat 11 instead opens a warning message with the following contents (translated from German):
A high security level has been chosen. Start the application that created the document, activate the dialogue "safety warning", choose "always trust macros from this resource, activate ... from Adobe Systems Inc. (the message aborts there).
I selected "Extras/Macro/Safety/Safety level" , there I selected "low". The above mentioned message still comes up.
What do you suggest to do in order to finally create pdf. files from doc. files?
Additional information: Creating pdf. files from xls. files (Excel), txt. files (Editor) and saving a webpage as a pdf. file all work fine.
Thanks for your input!

Although Office 2003 is old compared to Acrobat XI, according to Compatible web browsers and PDFMaker applications it should work, though support has passed end of life.
So my first test (if it were me) would be to see if PDFMaker works if run in the simplest way (the only way I ever use it, this right click conversion stuff isn't in my worldview). That is, does the Acrobat menu appear in Word and does it work? If it does not work, no other method based on it can work.

FatalInternalException The metadata for type "XYZ" did not come from a file,.....

Hy !
Did KODO have Problems if there is a mix of jdo metadata files in
build.dir and in external jar's while registering a Schema with the
MappingToolTask ?
We extracting all *.jdo files from additional jars to a metadata dir and
also copying all *.jdo files from the current build.dir, because KODO
only supports a single Fileset for the Metadatafiles.
The Ant Schema Task looks like:
<target name="schema-create-kodo" depends="init-kodo-schematool">
     <echo message="Schema Create for KODO"/>
     <taskdef name="kodo-schematool"
          classname="kodo.jdbc.ant.MappingToolTask"
          classpathRef="jdo.schematool.class.path"/>
     <kodo-schematool action="refresh">
     <config propertiesFile="${zeus.persistence.jdo.properties}"/>
     <fileset dir="${jdo.metadata.dir}">
          <include name="**/*.jdo" />
     </fileset>
     <classpath>
          <pathelement path="${compile.project.class.path}"/>
     </classpath>
     </kodo-schematool>
</target>
jdo.schematool.class.path: is the Path for the KODO Schematool
zeus.persistence.jdo.properties: ist the kodo.properties file
jdo.metadata.dir: is the dir with all metadatafiles
compile.project.class.path: is the classpath including a build.dir with
class files + metadatfiles and differnet additional jar files containing
also enhanced classes with corresponding metadata files
and that fails with:
[kodo-schematool] kodo.util.FatalInternalException: The metadata for
type "class com.wuerth.phoenix.bcserver.base.versan
t.PCapacityStruct" did not come from a file, and therefore we cannot
determine where to place the corresponding mapping
information. If you are using metadata from a jar or other resource,
you should use one of the other available mapping
factories.
com.wuerth.phoenix.bcserver.base.versant.PCapacityStruct comes from a
jar which also contains a metadatafile.
We are wondering because if we exlicit give a different metadata file
via a fileset the Schematool should ignore the other Metadata files
inside the jar + build.dir !?
mfg
Christian

The only Apple computers that have a Mag Safe connector are MacBook laptops (MacBook, MacBook Pro and MacBook Air).
The Mac mini 2010 and 2011 models have a standard power connector, I believe it is called an IEC C7 connector. You can see a picture of the back of the Mac mini here http://www.apple.com/macmini/design.html
Older Mac mini models prior to 2010 have a proprietary connector. While the following page is for a very old PowerPC Mac mini the connector is the same on early Intel Mac mini models as well. See http://support.apple.com/kb/HT3019

PO number not copied from Contract to Sales order

Hi Gurus,
when i try to create a sales order w.r.t a contract the Po number is not copying from cintract to sales order.
also the PO item is not copying from contract to sales orde.
Could u tell me the reason.
Cheers,
Sumith

Hi Sumith,
I'm not sure though but try this one this might jus help.
Go to VTAA,
select the target & Source doc type.
Go to header and check the COMPLETE REFERENCE CHECK BOX,
Which says it copies the whole of the reference doc from the
source doc to the target doc.
I jus hope this will sole your problem.
Cheers!!
Nitin

Itunes could not copy because the file could not be converted

So I just bought two songs from Itunes...but they won't sync to my iphone and an error message keeps coming up. It just says "Itunes could not copy because the file could not be converted" I just paid money for the songs though...so I would really really like to get them on my phone...any suggestions??

Problem Fixed:
Remove the song from your itunes library, then go to the itunes store and try to download it again. It will say something like "this song has already been purchased, would you like to download it again for free?". Click yes, and it will download again. This worked for me, hope it helped

Variant config - error Material ZZZ is not copied from the bill of material

Hello guys,
I try to obtain a material configurable in a new plant.
I have more errors and I don't know exactly if the problems are in setting of the variant configuration, or if the problems are in customizing.
When I try to make a Sale Document (Standard Order VA01), the following error occurs:
Material ZZZ is not copied from the bill of material.
Message no. V2003
Diagnosis
When the bill of material was exploded, it was established that no sales document item could be created for material ZZZ.
System Response
The system ignores the material during bill of material explosion.
Procedure
Check if the BOM explosion can be used without material ZZ. If not, delete the main item which lead to the BOM explosion. You may be able to enter an item manually in which the material ZZZ in the BOM.
What do you think it might the solution for this challenge?
Thanks in advance.

hello, friend.
the issue you presented is very broad and requires some more info, such as:
1. what are the item category groups of the material and ZZZ?
2. did you check item category determination in your sales doc type?
regards.

LaserJet Pro Scans, prints test page but will not print from a file

I installed a LaserJet Pro200 MFP M276nw on my wife's Toshiba Satellite (Windows 7 64Bit OS) laptop yesterday (Printer is brand new out of the box). I installed with a wireless connection. It will print a test page and also scan wirelessly but will not print from a file i.e. a PDF. I installed it on my HP Probook this morning and it works fine. Any suggestions would be appreciated. The thought of paying Geek Squad 75 bucks rubs me the wrong way, especially since i just paid them 100 for an extended warranty. Thanks!

Welcome to the HP Forums JBottensek,
I see by your post that the printer won't print a PDF document from the one computer.
I can help you with this issue.
I have provided a document to go through the steps which should resolve this issue for not being able to print PDF documents. Cannot Print PDFs from Adobe Reader.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. W

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. What shall I do?

Alauda_positos I would recommend reviewing your installation log files to determine the exact directory which the installer is unable to access. You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors discovered to this discussion.
For information on how to adjust file permissions please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.

Text is not copied from Customer masterdata to sales document header

Hi Friends,
Text was maintained in customer masterdata, that should be copied in to sales order header. In Quality server its working as per requirement. But in production its not copied from customer master data.
Same configuration settings are in production as well as quality(VOTXN)
Please suggest me regarding this

Hi Durga,
Please go to SD> Basic function > text control> Define and Assign Text Determination Procedures and in that screen, check the customer sales and distribution change view customer sales text and sales note for customer and its assignment .
I hope these will be helpful for you.
Regards,

Javadoc not copying from doc-files directories

Similar Messages

Maybe you are looking for