JavaFX Installation on windows mobile 5.0

I'm trying to install on the HP iPAQ hw6940 Windows Mobile 5.0, without success. The installation guide mension:
Note-Advanced Network Settings must be enabled in Windows Mobile on the device ....
This option does not exist on my device. Does anyone have this experience?

The JavaFX Mobile 1.2 runtime can only be run on Windows Mobile 6.1 and up

Similar Messages

JavaFX 2.2 not installing after JDK7u6 installation on Windows 7 x64

Please everybody ignore this message of mine, I've had a D'OH! moment! This new installation of JDK7u6 has completely thrown me
because of the existing documentation, as some of the documentation still states the following:
http://docs.oracle.com/javafx/2/installation_2-2/javafx-installation-windows.htm#CJGGCFBH
As on this page it still has the following documented:
+"Installing JavaFX+
+Note:+
+Only one version of the JavaFX SDK and JavaFX Runtime can be installed at a time. The JavaFX Runtime installer will automatically uninstall previous versions.+
+Run the .exe file of whichever installer you downloaded. If you use a bundled installer, the installers run in the following order:+
+Java Development Kit (JDK)+
+Java Runtime Environment (JRE)+
+JavaFX Software Development Kit (SDK)+
+JavaFX Runtime+
+The default installation directory for the JavaFX 2.2 SDK is C:\Program Files\Oracle\JavaFX 2.2 SDK. See JavaFX SDK File Structure for the directories and contents.+
+The default installation directory for the JavaFX 2.2 Runtime is C:\Program Files\Oracle\JavaFX 2.2 Runtime."+
And I guess I was still expecting to see the JavaFX installer following the JDK installer during installation. When this didn't happen I was searching my system for the
above installation path C:\Program Files\Oracle\JavaFX 2.2, and of course I had no entry for this, hence my earlier post. Talk about a trap for young players!
I installed both the 32 bit and 64 bit versions of the JDK 7 update 6 SDK. Both installed JDK7u6 successfully, but both failed to initialise
the JavaFX 2.2 installation wizard. I've checked through Control Panel and JDK7u6 are listed there, but no mention of JavaFX 2.2 anywhere?
Before installation I made sure to uninstall JavaFX 2.1 from the Control Panel before installing JDK7u6. So what do I do now?
Edited by: 863626 on Aug 17, 2012 9:25 PM
Edited by: 863626 on Aug 17, 2012 9:36 PM

@863626:
I actually did the same as you did: I uninstalled the JDK, the JRE, and JavaFX before installing JDK 7u6, and the JDK 7u6 installer installed the JDK and the JRE, but not JavaFX.
After reading the info you quoted in your post, I tried the following: uninstall everything, reinstall the 7u5 kit, which installed JavaFX 2.1.1, then uninstall the JDK and JRE 7u5 but leave JavaFX there, and reinstall JDK 7u6.
The JDK and JRE 7u6 were properly reinstalled, but the JavaFX installation was not upgraded to 2.2.0 as expected.
Moreover, I noticed that in the windows displayed after the JRE 7u5 is installed, the button present at the bottom is labelled "Continue" and leads to the JavaFX installation wizard.
In the equivalent window of the JDK/JRE 7u6 installer, the button present at the bottom is labelled "Close" and terminates the wizard without installing any JavaFX kit or component.
Conclusion: You did not have a D'OH moment — the JDK 7u6 installer either really misses the JavaFX kit or really has a bug in its installation sequence!
And by the way, I reproduced the bug with the 64-bit Windows installer on a 64-bit Windows 7 platform.
Anyone at Oracle can help?
Thanks,
Jeff

Mobile Infrastructure 7.0 JSP on Windows Mobile installation..?

Hi guys,
I have an urgent need for installation (.cab/.exe) for a MI 7.0 JSP SP11(or the latest SP12)
for Windows Mobile 5.0 based device.. Do you have any notion from where I can get the
installation? A look through SAP Notes did not get me to any meaningful issue .. only some patch sca's etc.
Thanks!
Best Regards,
Lalo

Hi
The DNS error that you see is when you actually open MI using the os_select.html is due to the fact the MI is not completely started when you clicked on the file. Because of the change in architecture in WM 5.0, it takes a longer time for tomcat to start up (MI relies on tomcat server). Hence one concrete solution to this problem is to wait for around 10 - 15 seconds after soft reset of the PDA and then click the os_select.html file. Else after the PDA is reset open the contents of jscpout.tx(which is present in the root dir) file and see for and entry "MOBILE INFRASTRUCTURE 7.0 SUCCESSFULLY LAUNCHED" or "Starting tomcat. Check logs/tomcat.log for error messages". Once you see either of the above statements, run the os_select.html file and this should open MI successfully.
You can also refer to my replies in following Re: How to install client frame work on PDA
Hope this helps.
Best Regards
Sivakumar

Emulators for windows mobile 10.0.10069 : the installer failed. fatal error during installation. error code: -2147023293

I am using win 10 home insider preview, build 10074. When I am trying to install VS 2015 community RC, selected Universal Windows App, it failed at
emulators for windows mobile 10.0.10069 : the installer failed. fatal error during installation. error code: -2147023293
VS file version is 14.0.5596.25192

Hello EL_1980,
The error -2147023293 translated to Hex is:FFFFFFFF80070643
0x80070643 is a general error here so it is hard for us to troubleshoot. Please try download the ISO format of Visual Studio 2015 Community so that you can use the fciv.exe tool to verify the hash value. All info are listed on the VS2015 download page:
https://www.visualstudio.com/en-us/downloads/visual-studio-2015-downloads-vs.aspx
Please click first "Visual Studio 2015" tap below image.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

JavaFX Mobile EA on Window Mobile 6.1 cannot show chinese correctly

Text{content: "测试" }, it is shown well in the JavaFX Desktop or applet. but it is garbled on JavaFX real device(HTC Touch Diamond 2 Window Mobile 6.1 professional)
I also try the new String("测试".getBytes(), "UTF-8") even "\u6D4B\u8BD5", nothing can be working well.
Anyone can help us on the garbled issue? we are really appreciated him, now we have tried any way and where should we go?
Thank you very much

the Character is not equals charIt should be, but it seems we don't have total symmetry of types yet. See [finish primitive-sequence to primitive-array conversions|http://javafx-jira.kenai.com/browse/JFXC-3257] bug, for example, or [nativearray of byte|http://javafx-jira.kenai.com/browse/JFXC-3325] which will be fixed in SoMa (JavaFX 1.3?).
I tried:
var foo = "{[ 1 .. 400 ]}";
var dummy = foo.substring(0, 1024);
var buff: nativearray of Character = dummy.toCharArray();
println(sizeof buff);and I get an error: TestPlain.fx:21: incompatible types
found : nativearray of Character
required: nativearray of java.lang.Character
var buff: nativearray of Character = dummy.toCharArray();
^
1 errorAnd if I write: var buff: nativearray of Character = dummy.toCharArray() as nativearray of Character; I get a compiler crash...
I see, looking at [String(byte...) doesn't compile|http://javafx-jira.kenai.com/browse/JFXC-2852] bug, SequenceConversions class in the webrev.zip file, that we don't have a toCharArray method yet. Either an overview or some technical issue, I don't know.
So it looks like there are still some holes in nativearray support (it was presented as "experimental" in JavaFX 1.2 release announcements...).
PS.: I am not a Sun employee, I don't know Chinese, I don't have a Windows Mobile phone and I didn't even tried the mobile emulator yet (just tried, seems hard to use outside of NetBeans, which I don't have), among other problems. So I fear I am not the best help you can get, don't put high hopes on me... :-P

Known Issue: Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294

Some users are receiving the following errors after Visual Studio setup completes
Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
Windows 10 SDK 10.0.10069 : The installer failed. User cancelled
installation. Error code: -2147023294

We've fixed this issue, and have released an update as of 7PM PDT 30 April 2015.
New installs of Visual Studio 2015 RC should expect to no longer encounter this problem, unless
you lose your internet connection during installation. (That is, this error now indicates that the Windows SDK or Windows Emulator setup invoked by Visual Studio setup has lost internet connectivity and cannot download necessary files.)
To fix the issue, re-run setup and select the features "Universal Windows App Development Tools" and/or "Emulators for Windows Mobile" again.
If you have already installed Visual Studio and encountered this problem, you can now modify your Visual Studio installation to successfully install.
Go to Program & Features, select Visual Studio 2015 RC, and select Change. Click
Modify, then select the features "Universal Windows App Development Tools" and/or "Emulators for Windows Mobile", and click
Update.
Note that "Universal Windows App Development Tools" will be already selected. This is expected. Keep it selected, and click
Update.
An alternate solution is to install the Windows 10 SDK and Windows Emulators separately. Go to
https://dev.windows.com/downloads/windows-10-developer-tools. Scroll to the bottom of the page and install
the Windows 10 SDK and Windows 10 emulators outside of Visual Studio setup.
Thanks!
-Paul

Flash Lite 2.1 for Windows Mobile 5.0 - Installation

Can any one tell me, what is the
Installation prerequisites of Flash lite 2.1 for Windows Mobile
5.0. I have downloaded
FL2_1_winmobile_sp_091206.CAB file from Abobe site but its
not having any exe and its not having any “Readme
document” also so I am unable to install this on my PC.
Thanks!

Wow! Adobe sure makes it easy!
quote:
Originally posted by:
MSSenthil
Ref URL:
http://labs.adobe.com/technologies/flashlite_wm5/
To use Flash Lite 2.1 for Windows Mobile 5.0 you will have
to first download the appropriate .CAB file for your device
(Smartphone or Pocket PC) and then install it. After installing the
Flash Lite 2.1 player you will have to activate your player for
your device. Follow these steps to get started.
Installing the player on your device:-
· Download the .CAB file for your device.
· Connect your device to your computer via ActiveSync.
· Copy the .CAB file to your “My Documents”
folder.
· Disconnect your device.
· On your device go to File Manager > My Documents.
· Select the FlashLite.CAB file and follow the install
instructions.
Activating your player:-
Before you can use the Flash Lite 2.1 Player on your device
you will have to activate it. Each installation of the player
requires you to activate the player using the unique device id
(IMEI number) of your device.
· On your device go to File Manager > Program Files
> Adobe > Flash Lite and launch the standalone player,
saplaywm.exe. This will show up a registration information dialog.
· Open up the File Manager->Program Files > Adobe
> Flash Lite->License.txt.
· Write down the 40 digit alphanumeric string and go to
the URL provided.
· On the registration site enter your 40 digit
alphanumeric string to activate your player.
· Your Flash Lite 2.1 Player will be activated.

What is the best solution for SAP R/3 4.7 and Windows mobile 5.0 Pocket PC?

Hi All,
I'm trying to connect SAP R/3 4.7 with RFC from Mobile application , now i'm using .net 2005 Windows mobile 5.0 pocket pc. Does Sap.net connector work for this project?
BR,
Prachya.

Hi Prachya,
it will not work on a PDA, because the .Net Compact Framework has only a limited instructionset of the .NET Framework and so you run into compile errors. You have to create the Proxies in Visual Studio 2003 anyway, because the .NEt connector requests Visual Studio 2003 for installation - at least this was the case 3 months ago still. once it is created you can import it to Visual Studio 2005 and use it there. But if you try to do that in a PDA App, you run into compile errors - as I said above.
I guess in your case another approach would make more sence - as you are not willing to use MI for your app.
Either you use MS SQL Server in between. On the PDA you can use SQL Everywhere/Mobile/CE (they change the name constantly, but it is the SQL Server for the PDA from MS) and connect it to an SQL server. there is a build in Sync functionality with the SQL server. You will find helpfull introductions on MSDN. And from the SQL Server you can connect to the Backend with your .Net connector. But this solution has its problems, because the build in sync with SQL server is a little tricky - and you need to license SQL server.
On the other hand: you can implement a Webservice, that connects with the PDA. This is possible with the .NEt Compact framework. And from the WebService you connect with your .NEt connector to the R/3 system. This will work fine - but you have to take care of the delta handling.
Hope this helps a little to answer your question - and why not use MI for that?
Regards,
Oliver

Not able to install Intellisync on Windows Mobile 6.1

Hi
We have got GMS 3.0.1 running on Linux and GW 8.0.2.
On my HTC Touch Diamond (Windows Mobile 6.1) I am not able to install Intellisync. I'm sending the Intellisync_setup (Microsoft Smartphone OS-Devices) via SMS. On my mobile device I tried either opening the link directly (default opens with Opera Mobile) or pasting it into Internet Explorer. In Opera is shown a message that the certificate of the server does not fit to the hostname. But certificate and hostname are exactly the same. It is a self-issued certificate by the way. I click on the accept button and select "Windows Mobile Smartpone" from the list. Then I select install on device. Installation starts... In the middle of "downloading package ..." I get: "Install Error: Connection problem. Please try again later, or contact your system administrator." After confirming with OK the installation window closes. I reboot the mobile device and there is the Intellisync Install window where I can enter server and credentials. After entering the servername and credentials I get the message: "A secure connection could not be established. Check your connection settings, or contact your system administrator" --> Ok --> "Authentication failed. Please try again." --> OK.
If I enter the same servername with https and same credentials over Opera or Internet Explorer I can access the GMS without any problems.
Have you got any ideas?
Thank you in advance for your help
pixel73

Originally Posted by pixel73
Thanks for your suggestions.
I tried that already. But the installation process can't be finished. I am always stuck at the "Intellisync Install" window where I enter the server name and my credentials. After clicking on the connect button I always get the following three messages:
"A secure connection could not be established. Check your connection settings, or contact your system administrator."
"Connection problem. Please try again later, or contact your system administrator."
"Authentication failed. Please try again."
Now on GMS I changed the following options and rebooted afterwards:
"Enforce SSLv3 connection and a minimum 64-bit key" --> to NO
"Server Key Length" --> to 1'024
I again performed a hard reset on my HTC.
None of all that helped.
Could it be a problem with the mobile services provider?
I'm tempted to say to recheck the certificate you are using. Has this been working before?
Could be the CN on the certificate does not have the full dn (e.g. server.domain.com)?

SDK 3.0 - CDC for Windows Mobile

Hi,
Where can I found the file .cab for install the CDC JVM of SDK 3.0 in my Windows Mobile?
Now, I use the Creme JVM for developer in Windows Mobile, but I want use the new SDK 3.0, more specific the CDC JVM in my WM application
I see that in path (NetBeans 6.7\mobility8\Java_ME_platform_SDK_3.0\on-device\winmobile-arm) exists a .cab for CLCD installation, but not found for CDC!
thanks a lot!
Fábio

Support for Windows Phone is being worked on for Kapsel.
I have not myself done tried using this cordova push plugin on Windows Phone but it might be worth having a look at.
Getting Started with Kapsel - Appendix H -- Non Kapsel Plugins

CLDC emulator is not showing windows mobile emulator as a registered device

Hi,
I want to run one J2ME application on windows mobile 6 emulator. I have done the setup using CLDC emulation on windows Mobile Emulator.
After doing installation of CLDC on emulator, need to register the emulator IP address in SDK. Done that using device-address.exe . Its done successfully.
Though device manager shows IP as its registered address, but emulator does not show the device emulator in its devices list.
emulator.exe -Xquery ------------> does not show windows mobile emulator it its devices list.
Can anyone please help for this. Without this am not able to run my J2ME application on windows mobile emulator.
FYI: I have installed MS Virtual PC but windows mobile 6 emulator is not binded to Virtual Machine Network Services Driver. Because, I am not getting this in drop-down list of adpaters.
I believe it will not make any effect.
Please help.

bkbooth11 wrote:
Hey,
I tried connecting my iPhone to a friends Mac and I wasn't able to see the photos in iPhoto either.
I have solved the problem though, well not me really, I found it in one of the other threads on here about not being able to see the iPhone on iPhoto.
Go through your Camera Roll and get rid of all the pictures in there that weren't taken with the iPhone camera, I had pictures in there that people had sent me via MMS and pictures that I had downloaded from e-mails. I e-mailed myself any important pictures and deleted the rest, leaving just all the photos I had taken with the iPhone camera. Connected to the computer and the iPhone is showing in My Computer again.
Hope this helps everyone here.
Thanks bkbooth11 I did as you suggested and that fixed the problem. Hopefully they will patch that soon as it is rather inconvenient.

Error while starting MI Client on Windows Mobile 2005

Hi Everybody,
I have installed the MI Client on my PDA. While starting the MI Client (on clicking of MI\start_me.html file) a popup has comming with the message "<b>The page cannot be displayed because the server could not be found or a DNS error occured."</b>. I have also checked "jscpout.txt" file, and has contain an error message as "Installation toolkit parameters /MI/tool.properties not detected".
Here are the details of the softwares installed:
OS           : Microsoft Windows Mobile Version 5.0 OS 5.1.1702
Processor : ARM920T PXA27x
CrEme      : CrEme327a_AX_CE50_PPC_minimal.cab
MI Client   : MI2.5 SP17
Can any body please suggest me how to resolve this error.

Hi Siva Kumar,
Thanks for reply, your solution worked for me.
Now I am getting a runtime error when I clicked on the deployed application link
I have posted the error description with the subject
<b>JSPerror : Invalid class file format (running with MI SP17)</b>
Please reply this thread too.
Regards,
Murthy

Urgent : Support of Windows Mobile 5.0

Hi,
We've been using Oracle Lite lately with PPC running Windows Mobile 2003. Since this month, the only PPC we can find on the market are running Windows Mobile 5.0. The question is : does Oracle Lite supports Windows Mobile 5, and if not, is it planned for near?
Thanks
Said

Hi fillip,
Im trying with PPC50-ARMVI on my new wm5 device. But i have little problem on installation and registering the dm agent. I cant see the scroll bar on the screen for me to select ok or cancel...... Any suggestions (But i can stll use ppc2003 and it works fine)

Windows Mobile 5.0 Flash 7 Install

I am having trouble acknowleding T&C's and disclaimer
whne installing Flash 7 on WM5 on Treo 700W. I can't find a way to
accept or agree. Any advice? Is there a desktop version of Flash 7
that can be installed via ActiveSyc?
THANKS!!

If you want the Flash Player 7 for PPC you can download the
installer (.cab) file here:
http://www.adobe.com/products/flashplayer_pocketpc/downloads/player.html
If you want the Flash Lite 2.1 for Windows Mobile 5.0 you can
download the installer (.cab) file here:
http://www.adobe.com/cfusion/entitlement/index.cfm?e=flashlite2_1_winmobile_download

DB2e for Windows Mobile 5.0

Hello,
I'm looking for a trial version of DB2e V8.2.4 for Windows Mobile 5.0 on PDA (I installed an emulator on my PC) because we have to use Mobile Infrastructure 7.0 and I would like to try it on my emulator, but I don't find the installation files on IBM site and the installation guide. Can somebody help me?
Many thanks in advance,
Maria

Hi Maria,
You can download trail version of DB2e from the following link.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/599d5c1d-0a01-0010-8095-df389cd8eb44
If you want use DB2e licensed version you need to get license key information from SAP.Contact your SAP Service Agent for more details. Then they will enable you the above said link from where you can download the DB2e.
Hope it helps.
Regards,
Scott.

JavaFX Installation on windows mobile 5.0

Similar Messages

Maybe you are looking for