JAX WS request and Resonse Help

Good day Guys,
Can anybody help me with a example or tutorial to create a JAX WEb Service.
What i need to do is to process a complex XML SOAP request and provide a response or a Fault message.
I have the three XSD Schemas but i dont really know where to start.
Thanks in advance.

This (http://www.javaworld.com/javaworld/jw-02-2007/images/jw-02-handler6.jpg) shows when the soap handler is executed in the request/response chain.
What could be the case is that the bytes you are writing to the PrintStream are still buffered, by calling flush any buffered output bytes are written to the underlying output stream.
Also do not forget to close the PrintStream. http://docs.oracle.com/javase/1.5.0/docs/api/java/io/PrintStream.html#flush()

Similar Messages

The search function in the itunes store does not work. It will accept a request and suggest searches but then it locks up and will not search. Clicking on the magnifying glass or a suggested search does nothing. Re-installing itunes has not helped.

The search function in the itunes store does not work. It will accept a request and suggest searches but then it locks up and will not search. Clicking on the magnifying glass or a suggested search does nothing. Re-installing itunes has not helped.

everything you stated here is exactly what i have done and have got nowhere. i have windows 7 64 bit on a hp 8 g of ram desktop. im also looking for help

How received the following error message: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998). I did what was requested and reinstalled iTunes, but still get this error message. Help!

My Toshiba laptop just recently started showing the the following error message when I try to open iTunes: " iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998)". I did what was requested and reinstalled iTunes, but still get this error message. Help!

b noir I never got any message about an entry point
Many thanks. If we're looking at a "naked" Error 7, I'd start with box two in the following user tip:
Troubleshooting issues with iTunes for Windows updates

Process on Help request and Process on value request events examples

HI All,
Can anybody please give me some examples of Process on Help request and Process on value request events.
Thanks in advance

HI,
Check programs
demo_selection_screen_f1.
demo_selection_screen_f4.
Regards,
Sesh

I have bought a Seagate Backup Plus 1TB drive, first time I have selected Mac Windows option which excludes Time Machine to work on it, but now I want to go back and select Only Mac option to activate my Time Machine application. I request you to help me

I have bought a Seagate Backup Plus 1TB drive, first time during plug-in, I have selected Mac Windows option which excludes Time Machine to work on it, but now I want to go back and select Only Mac option to activate my Time Machine application.
I request you to help me with the procedure of the same?

IMPORTANT - This will reformat your Seagate drive and hence wipe it. If there is anything on your Seagate drive you want to keep, save it somewhere else FIRST.
Plug the drive in.
In Finder select Applications > Utilities > Disc Utilities.
Select the external drive, select Partition option, give it a name (I call mine Mac Backup), select Mac OS Extended (Journaled) as the Format and under the drop down menu "Partition Layout" select the number of partitions you want (so if you want the drive to just be for Time Machine, select 1 Partition, if you want part of the drive to be for Time Machine and the rest for something else, select 2 partitions and so on). Click apply and the Disc Utility will partition and reformat your drive ready to use.
When this is complete, open Time Machine in System Preferences. Use Select Disc to select the drive (or if you have multiple partitions, the partition of the drive) you want and you are good to go.
This may be a long way round, but it gives you the option to partition your disc which you may want.

Working with request and respond in Java.. Help needed.

I'm currently working on making a old time- multiplayer shooter in java.
It will have a TCP server, that got all the games that are hosted
And all clients will connect and get the list of hosted games from this server..
To communicate, I made interfaces for request, and respond.
Logon object:
public class LogonObject implements Serializable, MSRequest, MSResponse {
    public String USERNAME;
    public String PASSWORD;
    public void clientWork(MainServerManager client) { // client will do this work..
        // Client work..
    public void serverWork(RCOS server) { // RCOS is the threaded object that contains socket to the client etc..
        // Serverwork..
}So currently, my cast in client looks like this:
        MSResponse objCast = (MSResponse) obj;
        objCast.clientWork(this);Since all the objects im sending, will be of either type of MSRequest or MSRespond, i have not found any problems with it.
But im wondering if there is any better way to do this?
One of the reasons why im wondering, is because i want to split up the project a bit.
At the moment, i got everything in one project (in Netbeans), and got packages like: Client, Client.Network, Client.GUI, Server, Server.Network, Server.DIV, Shared.NetworkObjects, and so on.
Shared contains all the classes that will go back and forth the client and server.
But I want to split them up into different projects. So Server is a project at its own.
So i tried in netbeans, to make one project for Server, one for Client and one for Shared.
This i thought would work out great, but when i tried to add the projects as libraries, I could'nt add both ways.
This is how i would want it to work:
Server (Access to shared)
Client (Access to shared)
Shared (Access to client and server)
Except when I add Shared in Server as a library, I cant add Server as a library in Server, and same for client.
Netbeans gives me the message: Can't add cylic reference.
So that brings me back to the question, is there a better way for me to split it up, or make the shared network files?
Ps: Sorry if its the wrong forum, but it goes under more than one thing, atleast as i figure.
Kind reguards..

Lgeee wrote:
And how would i go about doing that?By making a proper design.
This way, I can easily do what the object itself is made to do, without writing alot of code that checks what kind of object was sendt.
The first way I did this was:
Psudo Code:
Object obj = input.readObject();
String type = obj.getClass().toString();
if (type.contains("logonObject")) {
} else if (type.contains("playerObject")) {
I don't think that's relevant. I don't see where that code uses anything which is specific to the server and to the client. Those class names look like they belong in the server, so that code shouldn't be in a "shared" class. It should be in a "server" class.
As for the issue of having to tell what kind of object was sent, I'm sure there are better ways than just sending an object and then having the receiver inspect the object to see what kind of object it was.

Anytime I try to download pages to my MacBook Pro a window comes up that says we could not complete your request and that there was an error in the app store. someone please help

anyime that i try to download pages on my macbook pro from the app store a window comes up that says we could not complete your request and that there was an error in the app store. someone please help

Error
what is error code 1009?

My facebook home page is missing:top news, most recent, app requests, game request,and friends on chat....can anyone help?

After I updated Firefox I started having these issues...my Facebook home page is missing the following items: Top Stories, Most recent, App request, Game request and Friends on chat. Also the posts are all outdated, out of order, and they repeat themselves.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
See also;
*https://support.mozilla.org/kb/Problems+using+Facebook+in+Firefox

Trying to create a Field Validation Expression and need help

I have a picklist field and another field that are in question. I want to set some sort of rule that forces the second field to be populated only If specific values are selected from the picklist field.
I was going the route of a field validation Rule, but everything i've tried so far does not produce the results i am trying to achieve.
The first type of expression i tried was:
([<plProduction_Print_Account_Category_ITAG>] <> LookupValue("OCC_CUST_LOV_ACCOUNT_1", "No Production Print") AND ([<stSIC_Code_ITAG>] IS NULL))
This is generating the field validation error message when i select any of the correct values from the picklist. the problem is still the second field, which will generate the error if a value is entered into the second field, regardless of the picklist value selected. Switching the "IS NULL" to "IS NOT NULL" only reverses the problem on the second field, causing the error to generate when the second field is updated to a NULL or blank value.
I also tried :
= 'No Production Print' AND [<stSIC_Code_ITAG>] IS NOT NULL
and got similar results.
([<plProduction_Print_Account_Category_ITAG>] = LookupValue("OCC_CUST_LOV_ACCOUNT_1", "No Production Print"))
Similar results as well.
Does this need to be an IIF statement? Do I need to make this a workflow expression instead? i could really use some help as I have tried everything i can think of and admit, i'm not the expression guru!!!. Any assistance would be appreciated.
TeknoMan

Yes we have the same request and we used the following expression. Example we have a field "Método de pago" ( [<plMtodo_de_pago_ITAG<]), it's values are "CHEQUE and DEPOSITO" if we select DEPOSITO three more fields were requiered Route, Sucursal de banco and Clabe so we have to put this validation in the four fields including Metodo de pago.
[<plMtodo_de_pago_ITAG>] <> "DEPOSITO" OR ([<Route>] IS NOT NULL AND [<nSucursal_de_banco_ITAG>] IS NOT NULL AND [<stCLABE_ITAG>] IS NOT NULL)
well in the field CLABE we put the following [<plMtodo_de_pago_ITAG>] <> "DEPOSITO" OR ([<Route>] IS NOT NULL AND [<nSucursal_de_banco_ITAG>] IS NOT NULL AND [<stCLABE_ITAG>] IS NOT NULL AND Len([<stCLABE_ITAG>])=18) this was because the len of the value must be 18 characters.
I hope this works for you
Regards Catalina Valadez
Edited by: CatalinaV on 12/03/2009 10:54 AM
Edited by: CatalinaV on 12/03/2009 10:55 AM

SRVR(Service Request) and SRVO(Service Order) are not appearing in IC_Agent

Dear friends,
We are planning to implement Service Requests and Service Orders in CRM 7.0 Interaction Center
The Service Transactions(Service Order/Service Request) are available in 'Service Professional' business role but not available in 'IC_AGENT' role.
The things i have observed
1. Without the channel the Transaction Type was not appearing in SAP GUI (CRMD_ORDER)
2. Even after maintaining the Channels the BUS2000223 (Service Request) did not appear in CRMD_ORDER but the SRVO- Service Order transaction type appeared.(BUS2000116 Service Process)
3. Have maintained the SRVO and SRVR transaction types as dependent transaction types in the 'Business Transaction Profile'; still when clieck on the Service Request or Service Order create I am getting the below error
'No transaction type is available for creating a transaction'
Below is the diagnosis
Diagnosis
No transaction type is available when creating a transaction. This can be due to the following reasons:
No transaction type is available according to Customizing
The user has no authorization for the transaction type
System Response
It is not possible to create the transaction.
Procedure
Make sure that:
The transaction type is set up in Customizing
The user has authorization for the transaction type
Can you please guide me where the actual issue is
Regards
Raj

Hi Raj,
As per your quarries and requirement please go through the link, it will help you in understandable way
http://help.sap.com/saap/sap_bp/BBLibrary/Documentation/C35_CRM701_BB_ConfigGuide_EN_XX.doc
Please reward points,
Cheers,
Sunil

How to have multi select dropdowns for web request and adobe forms

Hi All,
I am working on interactive forms for CRM 7.0 using web request and ZCI layout.
When I say web request we define the fields required for the form in CRM that becomes the context for WDA and passed onto Adobe form.
This web request is a flat structure which mean if I have a node and attributes with in that you cant have multiple values to wards this node as in WDA.
Now My query:
I have a field called "xyz" since web request is a flat structure i just defined it as a string.
In WDA I made it a enumrated field and added key value pairs to it.
In Adobe form I binded this field to a WD native enum dropdown list every thing is fine untill here.
Now in the form I need this as a multiple select, so i changed the dropdown field to list box it works.
The form has to be submitted as a draft version when did so, it will not execute any APIs but saves the data to the web request.
When the same form is opened for the next time, with the data in web request it should reopen this field with the multiple seleced values high lighted.
since the field xyz is a single filed of string, how can i maintain multiple values in that...?
if there is a form status auto save function in Adobe form this might solve a bit but not sure when the form is opened 2nd time from web reqest view does it consider it as a new one or open the same form...?
I have such dropdown fields and problems including ones with depenedt values on one another.
I tried my best to explain the problem, if somebody can help me with this its much appriciated.
Note: Since this is dependent on CRM web request I am posting the same query in that block also apologies if this mean a duplicacy.
Thanks & Regards,
Sai

I got the solution and problem is solved.
Iterating & processing a enumrated dropdown is like any other dropdown /list box in adobe forms.
Regards,
Sai Krishna

PE 9 and 10 Help PDF Invalid List View Descriptions

Bottom line: Has anyone reported on these problems, and, if so, what is being done about them?
Until proven otherwise, I believe that Premiere Elements 9 and 10 Help PDF requires editing of its List View Descriptions which are appropriate for at least version 8.0/8.0.1, 7, and 4, but not versions 9.0/9.0.1 and 10. Please refer to the Help PDF Projects/View Clip Properties
for version 10:
http://help.adobe.com/en_US/premiere...B-312BB3F13B11
for version 9:
http://help.adobe.com/en_US/Premiere...355c-7f98.html
Problems in this regard for Premiere Elements later than version 8.0/8.0.1 and not for versions 8.0/8.0.1, 7, and 4:
1. List View Properties display in text for export video file, no Data Rate Analysis graphs
2. List View Columns, no ADD to add your own columns, so only Adobe built in ones, and none of the Adobe built in ones, like Client, allow for editable text.
Comments:
Data Rate Analysis
I had read somewhere that these graphs appear for tape based rather than non tape based imports. Mini test: Premiere Elements MPEG4.avi import and DV AVI export of the MPEG4.avi. Results: Version 8.0/8.0.1 Properties for import in text format (file properties) only and Properties for export in text format (file + export properties) as well as display of Data Rate Analysis graph. Versions 9 and 10 Properties for import (file properties) and for export (file + export properties), both import and export text only.
List View Columns
1. If I look at the project.prel WordPad documents and the Client Column information there in each, I do not see any difference.
2. If I create a Premiere Elements 8.0/8.0.1 project, set List View column choices Comments and Client, type in the comments and client information, and save/close/and re-open the project in:
a. Premiere Elements 9.0/9.0.1, the Comments columns and its information will not appear; the Client column will appear, but its information will not be editable. (The 9.0/9.0.1 version does have Client, but not Comments, as a built in choice under Edit Columns)....the latter might explain why no Comments column except...
b. Premiere Elements 10, neither the Comments nor Client columns and their information will appear. (The 10 version does have Client, but not Comments, as a built in choice under Edit Columns.)
One of the Potential Problems:
It is well accepted that, if you edit a project from an earlier version in a later version, you cannot go back to the earlier version for editing. So, one potential problem that I see in all this is the loss of this type of information on upgrading from 8.0/8.0.1 and earlier....
a. If you create a Premiere Elements 8.0/8.0.1 or earlier project which includes Comments and Client information in these List View Column choices, you will lose all that information in version 10 and have only non-editable Client information in version 9.
And, yes we have filed an Adobe Feature Request/Bug Form on this one.
Any comments about what I may have overlooked in trying to get those Help PDF List View Descriptions to work for me would be appreciated.
Thanks.
ATR

I definitely agree that the Help files could use some updating, Tony.

Difference between customizing request and workbench request?

Hi ,
What is the difference between customizing request and workbench request?
please reply.........

HI,
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
pl reward if it helps.
Thanks
Sadhu Kishore

EDI - 753Routing Request and 754 Routing Instructions transactions- what SAP ECC6 EDI output type, msg type, msg code, basis idoc is best practice to generate the idoc?

One of our Trading Partner wishes to implement the 753 Routing Request and 754 Routing Instructions. Can anyone give me best practice answer the following Questions? We are on SAP ECC6 R3
What Application? i.e. V2, V7?
What output condition to use? i..e. LALE, LAT2, SEDI????
What Message type? i.e SHPADV?
What Basic Idoc Type? i.e SHPMNT05?
What Message Code? i.e. SHPM?
What Process Code? i.e. SHPM??
What Function Module? i.e. IDOC_OUTPUT_SHPMNT??
Does the SAP Transpotation Module have to be configured for this to be implemented?
Your comments are greatly appreciated, we have until Nov 1 to be compliant?

Good Morning,
While I did not get any responses from my question, yes, I was able to determine what needed to be configured. I hope the below will help you: This is for SAP ECC6
The output application for the 753 Routing Request is "V7"
The output type is "SEDI"
Transmission medium is "6"
The Basic Idoc type is "Shipmnt05"
when setting up your Partner Profile (WE20) add:Message Partner Role "SP" with Message type "SHPADV', Message coed "753", Basic Type "SHPMNT05", Message Control add Application "V7", Message type "SEDI", Process Code "SHPM".
also http://scn.sap.com/thread/698368 pages 14 and 15 were helpful.
I have not configured the Inbound 754. For now the inbound 754 Routing Instructions will be emailed to our traffic department.
Thank you,
Have a great day,
jane

Prepayment request and final invoice

Can anyone help with a question about posting payments to a prepayment request and then reconciling the final invoice. We create a sales order and then a prepayment request for 100% of the sales order. The customer then pays for the goods. We put in the payment under the incoming payment screen against the prepayment invoice. This then closes the prepayment request.
We then ship the goods to the customer creating a delivery note from the sales order. Then we create a final invoice for the customer. All OK so far I think. Then the help page tells me to go again to the incoming payment screen, select the business partner and then select the prepayment invoice and the final invoice and all will be OK. BUT we cannot add the incoming payment because we get a message " Confirmation amount must be > zero".
What are we doing wrong. We have tried to do a standard reconciliation in the banking module, but this leaves a double posting amount in the VAT account.

By Pre Payment I believe you are referring to Down Payment Invoice. After you have processed an Incoming Payment for the Downpayment invoice there is no need to go to the Incoming Payment again to reconcile the downpayment.
You would link the downpayment from the AR Invoice itself. Please read this document https://websmp107.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000738282007E
Suda

JAX WS request and Resonse Help

Similar Messages

Maybe you are looking for