JDBC to JDBC error in receiver but success in message monitoring

Hi,
I got some doubt about message monitoring (SXMB_MONI), I have JDBC (DB2) to JDBC (Oracle) scenario. The message monitoring always show me success eventhough it has error when inserting to the target system (Oracle).
I am only can trace use Communication Channel Monitoring to known that my transaction actually failed.
Is there any workaround to this problem
Thank you and Best Regards
Fernand

Hi Raj,
The connection lost could be one of the possibility problem.
Can i use this scenario
Sender (JDBC, ansynchronous) -
> Receiver (JDBC, Synchronous), without BPM and then i still can see the message error whenever failed to insert into target system and restart the message.
or i have to use BPM for bridge between ansynchronous ---> synchronous mode.
Regards

Similar Messages

My inbox indicates a message is receive but all my message are open and so how can I fix this that the inbox will not indicate that I receive a message (one)

my inbox indicates a message is receive but all my message are open and so how can I fix this that the inbox will not indicate that I receive a message. It shows that I received one message?

lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken!

JDBC : error in receiver communication channel?

Hi Experts ,
I am doing a JDBC to JDBC scenario. The following error comes in my receiver communication channel monitoring.
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'VIN_STG_STORER_RMS' (structure 'Statement'): java.sql.SQLException: FATAL ERROR document format in structure 'Statement': expected 'access' tag(s) not found
My receiver data type has got the 'access' tag. What other reason can cause this error?
Receiver table name : VIN_STG_STORER_RMS
Regards,
Shamly

Hi Ranjit,
My moni shows processed successfully. but the error is in communication channel.
I have pasted below the target xml structure. Any suggestions?
Thank you.
Shamly.
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://mg.adityabirla.com/mg/wms/store_supps" targetNamespace="http://mg.adityabirla.com/mg/wms/store_supps">
<xsd:element name="MT_WMS_Store_Supps" type="DT_WMS_Store_Supps" />
<xsd:complexType name="DT_WMS_Store_Supps">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
1f3cf480f98411dcb83a0003ba0adbbd
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="Statement">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
33dd8ee0ef5c11dcb812001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="VIN_STG_STORER_RMS">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
33dd8ee1ef5c11dca724001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="access" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a31a45f0ef5c11dca305001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="STORERKEY" minOccurs="0">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a31a45f1ef5c11dcb3c3001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="15" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="TYPE" minOccurs="0">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a31a45f2ef5c11dcc33e001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="30" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="WHSEID" minOccurs="0">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a31a45f3ef5c11dcabb7001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="30" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
...and so on for many other fields.
Edited by: Shamly MM on Mar 24, 2008 10:27 AM

Mail not received by the receiver but successfully sent out

hello sir
i m new to java mail and i have installed one free server from in internet ........i have connected to that server through my programme ..........
i have send mail through my programme .....
from : [email protected]
to : [email protected]
it send it out successfully and showing in the server but it will not been received by the receiver..................can u plz tell me why and what i should do to come out of with this problem so that it will be delivered to the receiver...
thank you
gaurav

I sent like 6 msgs today and all day could not get one freaken message delivered. I have now permenetly turned off iMessage. The service in my opinon is horrible, not reliable and annoying. This is not the first time I couldnt get messages through.
In general iOS5 has caused me more problems then solutions.

ABAP Proxy error during runtime but success for manuall test ?

Hi,
I got scenario using inbound ABAP proxy. The problem is when i test the inbound proxy manually, it was sucessfully, but then if i run directly from sender got problem :
Error during proxy processing An exception with the type CX_SY_DYN_CALL_ILLEGAL_TYPE occurred, but was neither handled locally, nor declared in a RAISING clause The function call of ZPSCD_CTRACCOMOBJECT_CREA failed; a field may have been assigned to the parameter ZCOM_COMPDHDR whose type is not compatible with this parameter
Please help
Regards

Fernand,
As stated in the exception, there is a compatibility issue between source and target fields, but without further details (msg definitions etc), we can't tell you exactly what's wrong ...
What's the ABAP type of ZCOM_COMPDHDR field in your RFC function module ?
Rgds
Chris
PS : also check the msg content to make sure generated field is compatible with the expected type (manual test was successful because you set it to the suitable value, whereas in "real" situation there is discrepancy)
Edited by: Christophe PFERTZEL on Apr 28, 2008 1:22 PM

Texting error: can receive but not send

Error Invalid number. Please re-send using a valid 10 digit mobile number or valid short code
this happens to me all the time. Why, if it is the wrong number, am i receiving texts from these people?
I could understand if i didn't have the area code in there but I do.
What could it be?
I used texting all the time and calling is a pain...

Hi,
I have had some errors where the Phone Number I am trying appears twice in the "To" list.
One format appears to work, be accepted and the other does not.
Currently I have altered the Preferences for the Address Book in iCLoud (on Line) to NOT format the telephone numbers.
However my Own iPhone number still shows up as Formatted in the iMessage drop down.
It reads +44 xxx x32259
At least this way I get the Blue iMesssage icon next to the name and I don't get what looks like a correct number that goes red (Un-contactable).
That is on the iMessage Front
On the SMS front, my Number (which should not display as it is not a US Phone) still shows a Formatted number.
I would however try changing this to see it is make a difference.
I seem to remember the original instruction from AIM showing a constant run of digits. (+1234567890)
8:55 PM Wednesday; April 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Adobe Paper extension for PS CC has worked for many months. Today it disappeared from the Extension menu. I reinstalled and received a "successful reinstall" message but the extension does not appear any more.

Why has the Adobe Paper extension for PS CC disappeared from the Extension menu?

And, of course, as soon as it isn't 3am, I realise that it is because I haven't run the programs in the background. Oh dear...

Why can I receive but not send messages through Mail?

I recently installed a wireless router (linksys). I can send mail at the local coffee shop, yet here at home I can't. I know it's something very simple, but I'm giving up...and asking for help in fear of tweaking the settings beyond my knowledge. I get a popup that tells me I can't use the listed server for outgoing mail. I have a couple choices...1) lynksys 2)stmp.mac.com:tugboater.
I wish I could get it set up...Its annoying to have to use mt yahoo address.
Heelllppp!

Help! I have read through this string, but not found an answer. I too, can receive emails but not send them. The problem started last week - I've been successfully using my mail account for 2 years and then last week, stuff I send just disappears - no error messages. I didn't change any settings or do any updates. All sent messages show in my "sent" folder, as well. I have tried everything, including restoring my hard drive from a backup copy made before I was having difficulty.
I used suggestions in the online help, including using the "ping" function to see if I was communicating with my outgoing mail server. Trying to ping mail.mac.com I get the error message:
"PING mail.mac.com (17.250.248.152): 56 data bytes
--- mail.mac.com ping statistics ---
10 packets transmitted, 0 packets received, 100% packet loss
I am using mail and .mac mail through a cable DSL line and Airport wireless connection.
I tried changing my outgoing port to 110 and to 25 without help.
Any thoughts?

Can receive but not send messages

Can anyone help me? My imessage for Mac was working great yesterday then all the sudden I can't send messages. I tried sending messages to someone's email account and to a phone number. I am logged in with my Apple ID and also with my email address through AIM. However, I can get messages, but when I send, I get that red exclamation mark. So I click on it to resend and it still won't send.
I've tried restarting iMessage, my computer, changing my passwords, closing the conversation... not sure what else to try. I'm running OSX 10.8.3.
Any suggestions?!

hi,
Based on the email , the three other threads that have other bits of info in them I would also try a PRAM reset.
Shut down the computer.
Restart it holding down Apple/CMD ( or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
10:16 PM Saturday; April 27, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Can receive but not send messages using Entourage 2008

For years I have used Entourage for Mac and it has survived every upgrade and switch to iCloud. Until this week. I did nothing at all to change anything, and all of a sudden, my emails from Entourage are not going out. What happened? How can I fix it?
MacBookPro (10.7.5), Entourage 2008 (13.1.6)
Error message:
The server for account "iCloud" returned the error "5.7.8 Bad username or password (Authentication failed)." etc.
My account settings:
Account ID: [my mac.com email address]
IMAP server: imap.mail.me.com
Password: [my iCloud password]
SSL required: YES
Port: 993
For sending:
Port: 587

Having exact same issue with Outlook. Checked my Mac Mail software too and both are not able to connect. This all occurred after last weeks update.
Making me crazy.
Quadruple checked settings and have been on the phone with my ISP twice. All other accounts set up with SSL etc. work fine - gmail, hotmail and personal websites. This leads me to believe this is an Apple issue not TWC (my ISP).
I can get into iCloud with no problem and am able to send messages via my iPhone and iPad.
Any info would be appreciated.
Thanks.

Thunderbird will receive but not send messages.

I have been using Thunderbird for a year with no problems until now. It seemed to start right after I downloaded a Thunderbird update. The server and port settings seem right. I do not know what else to check. Should I re-enter my account password?

''michaelbenoff [[#question-1036564|said]]''
<blockquote>
I have been using Thunderbird for a year with no problems until now. It seemed to start right after I downloaded a Thunderbird update. The server and port settings seem right. I do not know what else to check. Should I re-enter my account password?
</blockquote>
''Matt [[#answer-665710|said]]''
<blockquote>
what is the error message?
</blockquote>
Error message as follows when trying to send message: "Message could not be sent using SMTP server for an unknown reason. Please verify that your SMTP server setting are correct." I have done this a number of times. Settings seem correct and I keep getting this message. Any ideas would be most welcome!!

File to JMS Scenario - Error is Receiver JMS Adapter

Hi,
I am working on File to JMS scenario. I have deployed all required jars for MQ 6.0.2 in SDM. Create all MQ related objects. I am getting following error for Receiver JMS adapter in CC Monitoring.
Please let me know if I have missed anything. Is there anything to do in Visiual Administrator->JMS Provider or JMS Connector for these kind of Scenarios?
Thanks in Advance...
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2009
MQJE016: MQ queue manager closed channel immediately during connect
Closure reason = 2009
at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318)

Hi,
I have made my Qmanager as default Qmgr. Now the error is :- Socket connection attempt refused
Recv JMS Communication Channel Error:-
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2059
MQJE011: Socket connection attempt refused
at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318)

Receiver JDBC ERROR

While I am Practicing Sameer Shadab Blog
File to Jdbc ( XML file to MS- Access mdb file )
Connecting to MS Access using receiver JDBC Adapter (Without DSN)
I am getting following Error..
JDBC adapter receiver channel cc_jdbc_receiver not initialized. Unable to proceed due to null
Exception caught by adapter framework: JDBC Adapter configuration not initialized: null
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: JDBC Adapter configuration not initialized: null
What does it mean..
Is Jdbc adapter not maintained in My XI server or local system on which iam working..?
My server has SQL server ..
File has been picking correctly,while posting it into mdb file iam getting error.
Receiver Jdbc channel details are
JDBC DRIVER : jdbc.odbc.JdbcOdbcDriver
Connection : jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=E:\TEST2\Receiver\TestDB.mdb
are parameters correct?
Thanks in advance,
Ramesh.

Hi ,
we tried to install MS-Access in my XI server ,
But we have installed XI server on
IA-64 Bit windows -2003 Enterprise server ..
And my basis guys are telling some 34 Bit vs 64 Bit incompatibility for Access installatoin.
How should i approach further.
Thanks In advance.
Ramesh.

Error in receiver JDBC channel

Hi,
I have a receiver JDBC scenario, which must execute a stored procedure.
Output message seems correct:
<ns0:MT_SQL xmlns:ns0="http://www.xxxx">
<STATEMENT1>
   <DIRECC ACTION="EXECUTE">
       <TABLE>biz_mag_clientes_direcciones</TABLE>
       <idcliente type="VARCHAR">0001000692</idcliente>
       <idtipodir type="VARCHAR">1</idtipodir>
       <iddireccion type="VARCHAR">0210054466</iddireccion>
       <idtipovia type="INTEGER">1</idtipovia>
       <idciclovida type="VARCHAR" />
       <idmaestro type="VARCHAR" />
       <idtiporeplicacion type="VARCHAR" />
       <cp type="VARCHAR">08188</cp>
       <callenum type="VARCHAR">UR CAN SALA XIC APDO. CORREOS 507,</callenum>
       <telefono type="VARCHAR">9999999</telefono>
       <observacion type="VARCHAR" />
       <grupocnae type="VARCHAR">55</grupocnae>
       <subgrupocnae type="VARCHAR">5541</subgrupocnae>
</DIRECC>
</STATEMENT1>
</ns0:MT_SQL>
But there is an error in receiver CC:
Unable to execute statement for table or stored procedure. 'biz_mag_clientes_direcciones' due to java.lang.NumberFormatException: For input string: "1 "
I think this problem it's due to idtipovia field (INTEGER type), but i don't know how to solve it.
Any input, please ? Thanks
Carme.

Yuki, if i defined this field as CHAR, cc returned this error:
JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'biz_mag_clientes_direcciones' ): com.microsoft.sqlserver.jdbc.SQLServerException: Error converting data type nvarchar to int.
Because this field is INTEGER type in target stored procedure .
Ravi, This field is defined as xsd:integer in data type.
Thanks,
Carme.

Intermittent JDBC error in Enhanced Receiver Determination

Hi,
I have an interface that use Enhanced Receiver Determination in PI 7.1 EHP1.
The database is DB2 on i5/os 6.1
Sometimes message ends in error :Error when determining the receiver: Problem while determining receivers using interface mapping: Runtime exception occurred during application mapping com/sap/xi/tf/_HI01_to_ReceiverDetermination_;
But the same message with same values is successfull earlier.
This is not a design problem; the interface is working well 95% of the time.
I found some JDBC error in NWA java logs:
Error in sax handler parsing request: Error when executing statement for table/stored proc. 'table' (structure 'statement'): java.sql.SQLException: [SQL0104] Token "BUSINESS_SYSTEM" was not valid. Valid tokens: FOR SKIP WITH FETCH ORDER UNION EXCEPT OPTIMIZE.
Error when calling an adapter by using the communication channel CC_RECEIVER_JDBC_PIDB2 (Party: *, Service: INTEGRATION_SERVER_PX1, Object ID: cb7ea38fb2ac3a06b12d79f5ade2bcf7) XI AF API call failed. Module exception: (No information available). Cause Exception: 'Error processing request in sax parser: Error when executing statement for table/stored proc. 'table' (structure 'statement'): java.sql.SQLException: [SQL0104] Token "BUSINESS_SYSTEM" was not valid. Valid tokens: FOR SKIP WITH FETCH ORDER UNION EXCEPT OPTIMIZE.'.
Thrown:
com.sap.aii.af.service.api.AFException: XI AF API call failed. Module exception: (No information available). Cause Exception: 'Error processing request in sax parser: Error when executing statement for table/stored proc. 'table' (structure 'statement'): java.sql.SQLException: [SQL0104] Token "BUSINESS_SYSTEM" was not valid. Valid tokens: FOR SKIP WITH FETCH ORDER UNION EXCEPT OPTIMIZE.'.
at com.sap.aii.af.service.api.AdapterAccess.sendMsg(AdapterAccess.java:214)
at com.sap.aii.af.service.api.AdapterAccess.execute(AdapterAccess.java:283)
at com.sap.aii.ibrun.server.lookup.AdapterProxyLocal.execute(AdapterProxyLocal.java:119)
at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.execute(SystemAccessorInternal.java:76)
at com.sap.aii.mapping.lookup.DataBaseAccessor.execute(DataBaseAccessor.java:74)
at com.sap.aii.mappingtool.flib7.SelectSingle.selectSingle(SelectSingle.java:54)
at sun.reflect.GeneratedMethodAccessor607.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
Any idea? Can high volume cause the JDBC Receiver to fail?
Martin

hi,
you r trying to impliment Lookup for the file adapter which is not synch in nature and hance u r not getting the responce back.
please find the link which deals with how to impliment lookup for file adapter.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file%252blookup%252bin%252budf.
now once u get rhe runtime receiver u can perform enhanced receiver determination (write a simple UDF)
regards,
navneet.

JDBC to JDBC error in receiver but success in message monitoring

Similar Messages

Maybe you are looking for