JDeveloper and Team Server

Hi everyone
I have a few questions about Team Server.
I installed TPC on Oracle and deploy otpc.war on Weblogic successfully.
My question is which free document repository server to use for document management?
How to get connector for such document repository?
I also put Bugzilla on one of corporation server (MS 2008 R2 64bit) and installation went well but from
JDeveloper i got error message when try to connect to repository .
I managed to connect to Bugzilla server from browser , any idea what`s going wrong on JDeveloper connection
I connect from Jdeveloper without problem as admin on Team Server
One more question
Which free chat server you suggest to put on my MS 2008 R2 ? so that users can connect over Jdeveloper?
Tnx

Now i check the proxy settings in Preferences ->Web Browser and Proxy and test is successful.
But strange error i catch after starting Jdeveloper :
"An unexpected sever error has ocurred in Jdeveloper" and details says
Mar 23, 2012 9:25:00 AM org.apache.commons.httpclient.HttpMethodDirector authenticate
SEVERE: Credentials cannot be used for NTLM authentication: org.apache.commons.httpclient.UsernamePasswordCredentials
org.apache.commons.httpclient.auth.InvalidCredentialsException: Credentials cannot be used for NTLM authentication: org.apache.commons.httpclient.UsernamePasswordCredentials
     at org.apache.commons.httpclient.auth.NTLMScheme.authenticate(NTLMScheme.java:332)
     at org.apache.commons.httpclient.HttpMethodDirector.authenticateProxy(HttpMethodDirector.java:320)
     at org.apache.commons.httpclient.HttpMethodDirector.authenticate(HttpMethodDirector.java:232)
     at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:170)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:323)
     at oracle.ideimpl.usages.FileSender.logToServer(FileSender.java:83)
     at oracle.ideimpl.usages.UsagesTrackerImpl.processUnsentLogs(UsagesTrackerImpl.java:269)
     at oracle.ideimpl.usages.UsagesTrackerImpl.access$300(UsagesTrackerImpl.java:41)
     at oracle.ideimpl.usages.UsagesTrackerImpl$3.run(UsagesTrackerImpl.java:377)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:662)
org.apache.commons.httpclient.auth.InvalidCredentialsException: Credentials cannot be used for NTLM authentication: org.apache.commons.httpclient.UsernamePasswordCredentials
org.apache.commons.httpclient.auth.NTLMScheme.authenticate(NTLMScheme.java:332)
org.apache.commons.httpclient.HttpMethodDirector.authenticateProxy(HttpMethodDirector.java:320)
org.apache.commons.httpclient.HttpMethodDirector.authenticate(HttpMethodDirector.java:232)
org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:170)
org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:323)
o.ii.usages.FileSender.logToServer(FileSender.java:83)
o.ii.usages.UsagesTrackerImpl.processUnsentLogs(UsagesTrackerImpl.java:269)
o.ii.usages.UsagesTrackerImpl.access$300(UsagesTrackerImpl.java:41)
o.ii.usages.UsagesTrackerImpl$3.run(UsagesTrackerImpl.java:377)
j.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
j.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
j.lang.Thread.run(Thread.java:662)
oracle.adfdtinternal.model.ide.jdev.JDevDataControlManager:Mar 23, 2012 9:25:00 AM oracle.adfdtinternal.model.ide.jdev.JDevDataControlManager notifyAfterPopulatingDataControls
INFO: Number of data controls:2
org.apache.commons.httpclient.HttpMethodDirector:Mar 23, 2012 9:25:00 AM org.apache.commons.httpclient.HttpMethodDirector processProxyAuthChallenge
INFO: Failure authenticating with NTLM <any realm>@proxy.x.x.x.x:8080
Edited by: blackyBoy on 23-Mar-2012 01:36
Edited by: blackyBoy on 23-Mar-2012 01:37

Similar Messages

JDeveloper and Team System Extension not working

I am using JDeveloper 11g (11.1.1.1) and latest VSTS extension. The Team System extension does not work.
Here are what I have done:
1) Install JDev, JDev team system extension, TFS team explorer.
2) Workspace created in Team Explorer.
3) JDev Versioning control set for Team system. Select workspace, refresh it.
4) Create a new application/project under team explorer workspace. In Application explorer, The application and project showed up with a "X" mark - not in source control.
5) Add the application/project into source control. Succeeded.
6) But - the application and project still show up with "X" mark. Trying to add again, JDev pop up error message: "file already exists in source control". Files still show up in pending changes window.
I am using windows XP SP2 for development.
Any ideas? Please, this is urgent.
Edited by: user8658859 on 2009/9/24 上午 2:55

I am betting you are running 4.3? I just upgraded my GS3 to 4.3 and now I can't get the GMail smart extension to work. Previously, I was able to on the same phone (but running 4.1.2) but couldn't use WatchIt. Now I can use WatchIt, but can't use Gmail. How frustrating!!

JDeveloper and Weblogic Server - DOESN't WORK

Hi All,
Yesterday, I was working fine with JDeveloper 11.1.1.6 until I tried to do a deployment (like normally I do) and Weblogic wouldn't start. It was giving me an error, something like 'premature end of file' and security stuff. However, my colleagues told me to rename the folder defaultDomain under C:\Users\Alejandro\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92. So I did. It didn't help.
I restarted the computer, reinstalled JDeveloper in a new middleware nothing. I created a new Windows user and repeated the process. Nothing.
My log when creating the domain is
Log File: C:\Users\Alejandro\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.j2ee.adrs\CreateDefaultDomain.log
Label: JDEVADF_11.1.1.6.0_GENERIC_111205.1733.6192.1
Product Home: C:\OracleClean\Middleware\jdeveloper\jdev\
Domain: C:\Users\Alejandro\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain
"C:\OracleClean\Middleware\oracle_common\common\bin\wlst.cmd" "C:\Users\Alejandro\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.j2ee.adrs\CreateDefaultDomain.py"
Process started
wlst >
wlst > >CLASSPATH=C:\ORACLE~2\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\ORACLE~2\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\ORACLE~2\MIDDLE~1\JDK160~1\lib\tools.jar;>C:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\ORACLE~2\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server\lib\web>services.jar;C:\ORACLE~2\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\ORACLE~2\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\ORACLE~2\MIDDLE~1\ORACLE~1/modules/oracle.jrf_11.1.1/jrf->wlstman.jar;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF->SH~1.JAR;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\lib\ADFSCR~1.JAR;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.JAR;C:\ORACLE~2\MIDDLE~1\ORACLE~>1\common\wlst\RESOUR~1\IGFWLS~1.JAR;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-wlst.jar;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf->wlst.jar;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar;C:\ORACLE~2\MIDD>LE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OVDWLS~1.JAR;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.JAR;C:\ORACLE~2\MIDDLE~1\ORACLE~1\comm>on\wlst\RESOUR~1\wsm-wlst.jar
wlst >
wlst > >PATH=C:\ORACLE~2\MIDDLE~1\patch_wls1035\profiles\default\native;C:\ORACLE~2\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server\bin;C:\ORACLE~2\>MIDDLE~1\modules\ORGAPA~1.1\bin;C:\ORACLE~2\MIDDLE~1\JDK160~1\jre\bin;C:\ORACLE~2\MIDDLE~1\JDK160~1\bin;;C:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
wlst >
wlst > Your environment has been set.
wlst >
wlst > >CLASSPATH=C:\ORACLE~2\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\ORACLE~2\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\ORACLE~2\MIDDLE~1\JDK160~1\lib\tools.jar;>C:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\ORACLE~2\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server\lib\web>services.jar;C:\ORACLE~2\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\ORACLE~2\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\ORACLE~2\MIDDLE~1\ORACLE~1/modules/oracle.jrf_11.1.1/jrf->wlstman.jar;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF->SH~1.JAR;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\lib\ADFSCR~1.JAR;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.JAR;C:\ORACLE~2\MIDDLE~1\ORACLE~>1\common\wlst\RESOUR~1\IGFWLS~1.JAR;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-wlst.jar;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf->wlst.jar;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar;C:\ORACLE~2\MIDD>LE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OVDWLS~1.JAR;C:\ORACLE~2\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.JAR;C:\ORACLE~2\MIDDLE~1\ORACLE~1\comm>on\wlst\RESOUR~1\wsm-wlst.jar;C:\ORACLE~2\MIDDLE~1\utils\config\10.3\config->launch.jar;C:\ORACLE~2\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbynet.jar;C:\ORACLE~2\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\ORACLE~2\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbytools.jar;;
wlst >
wlst > Initializing WebLogic Scripting Tool (WLST) ...
wlst > I am currently moving to a next computer to see because I cant keep spending time by solving this. Any help? Or should I just reinstall windows? I cant use linux because I need to work under VPN connection and I didn't managed to set it up.

Really don't know much about your problem but whenever i have weired problem like these..... (it has happened twice in last one year) I just renamed that sytem 11.1.1.6.38.61.92 folder
next time i start Jdev, it creates this folder and everything started working fine.... the main problem here is that.... you have to setup your connections, version control and other weblogic specific items again...... from my experience, that has been worked out well.....
-R

JDeveloper and Application Server Connection

Hi all,,
I want to make a connection to application server(APPSRV) on another computer from my local computer.
While creating the connection, i want to enter the opmn port. But how can i find the opmn port from application server web browser?
And another issue is,, while making connection to the application server on another computer, will i enter the a "remote opmn port" or "opmn port" which are
determined installing the soa suite?

You are mixing versions.
JDev 11g needs the 11g SOA version (download from here )or use JDev10g together with Oracle SOA Suite 10.1.3.1.0
Timo

Jdeveloper and CVS server

I have connected to my CVS server fine. I am having a problem commiting files. Each time I commit the files I have to manuall increase the version number.
Has anyone worked through this problem before.

- Could you tell us which CVS client you are using?
GNU CVSNT 2.0.8 I downloaded it from www.cvsnt.org
- When you say that you have to manually increase the version number, how are you doing this? Are you editing the CVS/Entries file at all?
I right click on the file in my project. I click commit the Commit to CVS dialog box appears and I have to click on the common options tab. I then click on the Use Revision Number or Tag: and manually enter a revision number.
- Am I right in understanding that your CVS client is not assigning the correct incremental version number to committed files (ie. the version number stays the same after a file is committed)?
I can only do this manually so the version number is incremental so to speak.
- Does the CVS output in the log window show that these files were indeed committed?
Yes. I also can check the files on the server and see that they have been committed.
Thanks,
Sam

Unable to login to Team Server from JDeveloper

Greetings!
I have installed the Team Productivity Center. Both the JDeveloper and TPC are on same box. But I have trouble loging in.
What Server name and Port# I should provide while connectiong from JDeveloper? Because while installing TPC it didn't ask/show port#.
The install guild (link pasted below), is not very clear on installation/verification procedure -
http://download.oracle.com/docs/cd/E15523_01/doc.1111/e14156/toc.htm
Thanks
nc

ha HA! Figured it out finally after countless hours. This page helped: http://multikoop.blogspot.com/2009_12_01_archive.html
The parts that aren't covered:
1) The new Oracle Express 11g comes with an application express program I hadn't seen before. Figure out how to create a workspace and it should create an accompanying user/database schema.
2) You've got to setup a weblogic server separate from the integrated one that automatically runs your web programs you deploy from JDev. This should be in your (Windows) start menu with JDeveloper->Weblogic Server->Tools->Configuration Manager. That's how you get that deployment folder posts keep talking about which you're going to point the Oracle Team Productivity Server to.
3) You start the weblogic server in THIS domain (default is base_domain). There should be a file called startWebLogic that starts your server.
4) When you connect to the Team Server in JDev, my team server was localhost. My port was 7001.
And that's how you burn an entire day when you're a noob and have no one to turn to.
Enjoy.
Will

Lumira Server for BI Platform and Team/Edge consumption & licensing question

Hi. I have a few questions.
Question 1:
From my reading, I've heard that Lumira Edge/Team server may not be a part of BI-Suite License. I read a Lumira Server ASUG Webcast recap by Tammy Powlas here (SAP Lumira Server for Teams Roadmap ASUG Webcast) over the weekend and one of the Q&A questions struck me:
Q: Is this included with the BI Suite license from SAP?
A: Lumira Server for Teams (Edge Edition) is not covered under BI Suite License. However, Lumira Server for BI Platform (RTC Planned in April) is covered under BI Suite licenses
In a separate conversation late 2014, I thought I'd heard that Lumira Team/Edge server was supposed to be usable by BI Suite licensed customers, but it sounds like I'm mistaken?
Question 2:
Next, the second part of the statement gave me hope:
However, Lumira Server for BI Platform (RTC Planned in April) is covered under BI Suite licenses
I then looked at the Lumira Deployment Options for Departments Part 1 – ASUG Webcast by Tammy Powlas to get some more information on Lumira Server for BI Platform. This slide gave me some hope (emphasis mine in green):
But then I see some more information a little later:
Is this slide to imply that the version without HANA (or HANA XS) for BI Platform will only really just serve as a user rights management and Lumira document repository? And that if I want to view a Lumira document, I must still open from the Lumira Desktop client?
It was suggested I start a new discussion thread to ask this licensing question about a product that's not out yet (but the slide says it's GA so I'm still confused) so here I am with my discussion thread!
Hopefully someone can make me less confused. I'm hoping the answer is as a BI-Suite customer that we do not have to make a decision to either invest in new Edge/Team licenses or buy HANA XS hardware to establish a beachhead of Lumira usage in our organization. We've been struggling with promoting Lumira and the sharing piece has been the sore spot.

Hi Michael
You are right, it is confusing...
I think it will be better to contact sales to get this explained as opposed to technical support people that monitor this SCN Space.
Sales ph: 866-681-3435, 1-800-677-7271
Worldwide Office Locations | SAP
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter (#SAPLumira)
Got Enhancement ideas? Use the SAP Idea Place

TFS and Build Server 2013 with CNAME

Hello Team
As we have TFS 2013 with Update 3 on windows server 2012 and another windows server 2012 machine have build server installed. It is working well with machine name and build is running properly.
Once i tried to change the machine with CNAME its not started and throwing error like below:
Team Foundation Build Configuration
Build Service endpoint cannot be configured with a host machine other than
MACHINENAME.
OK
I tried to disable loop-back, firewall rule already applied, DNS pointed to correct IP address, DNS Flush already done and also i tried to un-register and register to new one but getting same error. Unable to register with CNAME ?
BotheTFS 2013 and Build Server have version
TFS Build- 12.0.30723.0 (Tfs2013.Update3)
TFS Server- 12.0.30723.0 (Tfs2013.Update3)
Any help ... thanks in advance!!!
Thanks Ranveer Katiyar

Can someone assist me on this ? I am stuck and unable to configure CNAME to Build Server and getting error
Team Foundation Build Configuration
Build Service endpoint cannot be configured with a host machine other than MACHINENAME.
OK
Thanks Ranveer Katiyar

Communication between the DNS/DHCP Manager and OES Server

No communication between the DNS/DHCP Manager Console and OES server (status,start,stop)
The screenshot shows the tab "DHCP (OES Linux)" in the DNS / DHCP Manager console
in the bottom of the image it shows the state of the DHCP servers.
allDHCP.JPG
The dhcp service is started on all these servers
You can see that the status is known only for four servers.
The button "start/stop DHCP service" works fine on this servers and
the dhcp service can be canceled and also restarted
But the status of the "dhcp service" is not recognized for all the other DHCP servers
and so we can not start or stop dhcp service on these servers.
All servers were installed at different times (last three years) with OES11 and
are upgraded to OES11SP2 with all patches.
The server keto (DHCP_keto) is a new installation OES11SP2 few days ago.
All OES servers were set up identically from me. LDAP, LUM, DMS, DHCP works fine.
Which service on the OES server is responsible for
communication (status indicator) between the DNS/DHCP Manager and the OES serve?
How the status query is performed by the DNS/DHCP Manager?
How can I test the communication to the server on the client (console)?
Which configurationfiles I should be compare on the server?
Thanks in advance
Gernot

gernot,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

IBM WPS: Error While Creating App and Int Server Connections in JDev 10g

Hi,
I have been struggling to create App Server and Int Server connections in JDeveloper 10.1.3.4 without any luck.
The JDeveloper is present on VM ware machine from which I'm trying to establish the connections to remote server where SOA Suite 10g is installed on IBM Websphere.
My Settings:
App Server:
Connection Type: Standalone OC4J 10.1.3
RMI: tried WC_defaulthost port, 6003, RMI default port (How do I get the actual value of RMI on IBM Websphere and does this really make a difference?)
Connection test fails with Mbean error. Ignored this error as documented in Installation guide.
Int Server:
Used the above App Server connection, gave the http port value of 9700 (also the WC_defaulthost on IBM Websphere)
Connection test fails for App Server, BPEL PM Server and ESB Server.
I have gone through other threads where different workarounds were suggested but none of them worked for me. The workaround of adding the property ipaddr with the value 0.0.0.0 in opmn.xml doesn't hold good here as IBM WPS doesn't have OPMN.
Please suggest a working solution for this issue.
Regards,
CC

The below message comes when you don't specify any default file for your webcenter portal application and this should not be any problem.
Target Portal.jpr is not runnable, using default target index.html.
Can you answer to my questions:
1. Did you just created a new wcp application in jdev and ran it with out doing any changes? If you have done what are the changes?
2. How did you ran your application? (right clicking a particular page or right clicking your portal project and selected "run" option?

I need to add a new report to the application that is done using visual studio and SSRS and SQL Server 2008

I have an application that is done using SSRS on visual studio and it connects to the report server on SQL server 2008 environment.
I've been changing the existing reports using visual studio 2008 and modifying the reports on the report server. How do I add a new report to the application ? I created a new report and deployed it on the report server but it didn't show up in the application.
I can access the application source code on visual studio 2010 and TFS (Team Foundation). Thanks.

Hi,
I have a question. This application retrieves SSRS reports from the report sever. When I download the reports
from the SQL Server I can open them in visual studio 2008 but they don't open in visual studio 2010. I can access the application files on visual studio 2010 and team foundation server 2010. I was unable to open team foundation server 2008 on visual studio
2008. The issue is that I am unable to add a report with a new name to the application. I use visual studio 2008 to deploy the reports on the report server but it has to be the same name to be able to run the report from the application. I can deploy any report
on the report server but I can't access it from the application unless it has to be the same name as the present reports. If I keep the report the same name then it will replace the old report and the new report will run from the application. But only if it's
the same name. I guess when I add a new report to the application with a new name I am supposed to add a definition in the application C sharp files on visual studio 2010 so that the new report will show in the application. What's your opinion
? I have attached 2 images of the application and team foundation server 2010 and the report server.
Thanks.

SharePoint 2013 and SQL Server AlwaysOn - HA

Hi guys,
Please help!
I need to setup SP13 server on SQL 2012 AlwaysOn (on sql01 and sql02). The HA AlwaysOn group already configured by DB team on these 2 replica with and called SP_AOAG alias
My question is can I use this alias to setup SharePoint or I need to configure the HA AlwaysOn group for SgharePoint as suggested in the article below:
http://blogs.msdn.com/b/sambetts/archive/2013/04/24/sharepoint-2013-and-sql-server-alwayson-high-availability-sharepoint.aspx
Any advice greatly appreciated .
BalaiP

You do not want to use a SQL Alias with an AG Listener. Just point SharePoint straight at the AG Listener. You will need to manually add any accounts to non-primary instances. You do not need to add them to individual databases, of course. You will also
need to manually set MAXDOP to 1 on non-primary instances.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Cannot test portlet using JDeveloper and built-in OC4J

Hi everybody,
I'm not trying to sound stupid but my problem seems to be very basic but i cannot solve it. I'm new to Jdeveloper. Here's my problem.
I'm using Jdeveloper 10.1.2.1.0 (build 1913) to develope a portlet. I deployed it to the built-in Standalone OC4J of Jdeveloper and got the following messages:
---- Deployment started. ---- Sep 6, 2006 7:46:11 PM
Target platform is Standalone OC4J (AppServerConnection2).
Wrote WAR file to D:\jdev1012\jdev\mywork\Uma_OWHO\Uma\deploy\UmaPortlets.war
Wrote EAR file to D:\jdev1012\jdev\mywork\Uma_OWHO\Uma\deploy\UmaPortlets.ear
Invoking OC4J admin tool...
D:\jdev1012\jdk\jre\bin\javaw.exe -jar D:\jdev1012\j2ee\home\admin.jar ormi://cuongttlabtop/ admin **** -deploy -file D:\jdev1012\jdev\mywork\Uma_OWHO\Uma\deploy\UmaPortlets.ear -deploymentName UmaPortlets
checkIsLocalHost() error: cuongttlabtop/: cuongttlabtop/
Uploading file D:\jdev1012\jdev\mywork\Uma_OWHO\Uma\deploy\UmaPortlets.ear to oc4j server side
Notification ==> Application Deployer for UmaPortlets STARTS [ 2006-09-06T19:46:17.406ICT ]
Notification ==> Undeploy previous deployment
Notification ==> Copy the archive to D:\jdev1012\j2ee\home\applications\UmaPortlets.ear
Notification ==> Unpack UmaPortlets.ear begins...
Notification ==> Unpack UmaPortlets.ear ends...
Notification ==> Initialize UmaPortlets.ear begins...
Notification ==> Initialize UmaPortlets.ear ends...
Notification ==> Initialize UmaPortlets begins...
Notification ==> Initialize UmaPortlets ends...
Notification ==> Application Deployer for UmaPortlets COMPLETES [ 2006-09-06T19:46:19.000ICT ]
Exit status of OC4J admin tool (-deploy): 0
D:\jdev1012\jdk\jre\bin\javaw.exe -jar D:\jdev1012\j2ee\home\admin.jar ormi://cuongttlabtop/ admin **** -bindWebApp UmaPortlets UmaPortlets http-web-site /UmaPortlets
checkIsLocalHost() error: cuongttlabtop/: cuongttlabtop/
Exit status of OC4J admin tool (-bindWebApp): 0
Use the following context root(s) to test your web application(s):
http://cuongttlabtop:8888/UmaPortlets
Elapsed time for deployment: 12 seconds
---- Deployment finished. ---- Sep 6, 2006 7:46:23 PM
When i tried to access the URL: http://cuongttlabtop:8888/UmaPortlets by Mozilla Firefox nothing came up instead : 403 Forbidden Directory browsing not allowed
Please help me everybody!!!!! It's urgent. My boss will check my work on this Friday :((.

I tried to access both URL you gave me and got the error:
404 Not Found
Resource /UmaPortlets/providers not found on this server
I really dont understand what's going wrong here?? I followed exactly what Oracle tutorials tell me :(

Document stores in both SAP database and Content Server

Hi,
We don't want to store doc. in SAP database and chose to use content server. We have KPro checked in configuration also.
Our basis team has created a content repository ZP that points to the content server, in the document area.. they enter "ARCHLINK" instead of DMS. So they told me to create doc. and pick this new ZP to store the doc. But we I created a doc. in CV01N, went to check in the original, the new repository ZP is not on the list of choice to pick from. So I cannot store the doc. in that new content repository.
Our basis team told me that if we use DMS in the document area, the doc. stores in both SAP database and Content Server. We don't want to have doc. stores in SAP database that's why we have content server.
How can I create DMS and store in content server only (not SAP database) ?
Thank you,
Sam Schwartzberg

Hi Samantha,
While check-in activity are you able to choose the new content repository i.e. ZP?
If not then use t-code OAC0 and while creating the repository check whether the certificate is activated by basis or not .
If not then you need to activate the certificate for the new repositoty in CSADMIN then only it will appear in the list while "check-in" the dcouments.
Please check for the same. Also check the t-code OACT , this new repository is shown or not.
I hope this will resolve the query.
Regards,
Ravindra

Blackberry Z10,post security wipe...BBM Not working..Showcasing error Unable to complete Set Up and Temporary Server Error"

I would request you to please help fixing the BBM error - Unable to complete Set Up and Temporary Server Error”.
I am using a BB Z10 with Software version 10.1.0.4181 and OS version 10.1.0.4633
Already tried resetting device to Factory Settings and Security Wipe...
Please help.

Hey KaranPrabhakar,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Follow the steps in this KB article to resolve the issue: www.blackberry.com/btsc/KB33780
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

JDeveloper and Team Server

Similar Messages

Maybe you are looking for