Lumira Server for BI Platform and Team/Edge consumption & licensing question

Hi. I have a few questions.
Question 1:
From my reading, I've heard that Lumira Edge/Team server may not be a part of BI-Suite License. I read a Lumira Server ASUG Webcast recap by Tammy Powlas here (SAP Lumira Server for Teams Roadmap ASUG Webcast) over the weekend and one of the Q&A questions struck me:
Q: Is this included with the BI Suite license from SAP?
A: Lumira Server for Teams (Edge Edition) is not covered under BI Suite License. However, Lumira Server for BI Platform (RTC Planned in April) is covered under BI Suite licenses
In a separate conversation late 2014, I thought I'd heard that Lumira Team/Edge server was supposed to be usable by BI Suite licensed customers, but it sounds like I'm mistaken?
Question 2:
Next, the second part of the statement gave me hope:
However, Lumira Server for BI Platform (RTC Planned in April) is covered under BI Suite licenses
I then looked at the Lumira Deployment Options for Departments Part 1 – ASUG Webcast by Tammy Powlas to get some more information on Lumira Server for BI Platform. This slide gave me some hope (emphasis mine in green):
But then I see some more information a little later:
Is this slide to imply that the version without HANA (or HANA XS) for BI Platform will only really just serve as a user rights management and Lumira document repository? And that if I want to view a Lumira document, I must still open from the Lumira Desktop client?
It was suggested I start a new discussion thread to ask this licensing question about a product that's not out yet (but the slide says it's GA so I'm still confused) so here I am with my discussion thread!
Hopefully someone can make me less confused. I'm hoping the answer is as a BI-Suite customer that we do not have to make a decision to either invest in new Edge/Team licenses or buy HANA XS hardware to establish a beachhead of Lumira usage in our organization. We've been struggling with promoting Lumira and the sharing piece has been the sore spot.

Hi Michael
You are right, it is confusing...
I think it will be better to contact sales to get this explained as opposed to technical support people that monitor this SCN Space.
Sales ph: 866-681-3435, 1-800-677-7271
Worldwide Office Locations | SAP
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter (#SAPLumira)
Got Enhancement ideas? Use the SAP Idea Place

Similar Messages

How to change and save a new file in Edge web Lumira server for Team ?

Hi Lumira folks,
I've installed SAP Lumira 1.0, Edge edition and View a sample 'Dairy Wholesaler-Sample"
I'd like to change it and save as new file, but "Save" button is disabled and when I put my mouse over the button,
it says "Save Option is disabled in this version".
Is there any idae how to change and save as a new file in Lumira Edge ?
Many Thanks.
JH

I've just found the reason as below.
http://scn.sap.com/community/lumira/blog/2015/03/20/lumira-server-for-teams-edge-edition-version-compatibility
The current version of Lumira
server for teams is 1.0. This version uses Lumira 1.22 as its 'engine' as this
was the version of Lumira Desktop that was shipped at the same time.
Hence with the current Lumira
version compatibility; namely that a newer version of the product can open an
older document, but an older version cannot open a newer document, care must be
taken when deploying Lumira server for teams.
Lumira server for teams is only
compatible with Lumira desktop 1.22. If you intend to deploy Lumira server for
teams, ensure your desktop users do not move to a later version of the desktop.
Content created in a later version of Lumira desktop can be uploaded and shared
via Lumira server for teams, but it cannot be viewed or edited online in the
browser.
Ensure desktop users disable the
auto update capabilities in the desktop preferences, and set the update to
none.

I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
Thanks

You are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

How to Setup deducated server for FR Repoting and Consolidation

Hi experts,
We have an issue where running FR reports slow down HFM for users. We were thinking of dedication 1 server for FR reporting and another for consolidation. I read the 9.3.1 manual and it says it is possible to do that. However, no steps were provided.
Can anyone please shed some light on the steps we need to perform ?
Thnaks a lot for your help in advance

>
Hello!
I have downloaded the SPARC ISOs for Solaris 9 from
sun.com, and I have tried many times to set up Install
server (Solaris 9) for SPARC machines on an Intel PC,
but I always get the following error.
I take it you're running solaris x86 on that intel pc?
bash-2.05#
/cdrom/cdrom0/Solaris_9/Tools/setup_install_server
/export/home/sol-sparc/
ERROR: Install boot image
/cdrom/cdrom0/Solaris_9/Tools/Boot does not exist
Check that boot image exists, or use [-t] to
specify a valid boot image elsewhere.
bash-2.05# If you do a "cd /cdrom/cdrom0/Solaris_9/Tools/" and then do an "ls" do you see the Boot directory? Is there anything in that directory? That's the software 1/2 CD you're running that command from right?
Thanks,
Daryl

Snow leopard server for net boot and software updates only what needs to be running to use it?

Snow leopard server for net boot and software updates only what needs to be running to have it work right?

Netboot and Software Update, at its simplest. Mac OS X Server also expects to have functional IP networking and DNS services (somewhere) on the LAN (and if you're behind a NAT gateway, then the DNS server(s) are on your LAN and not out at your ISP), or things get weird. SUS (usually) works out of the box, outside of cases where there's an outbound firewall. Netboot can be more effort to setup, in terms of what you're loading into the clients.

My account asks me to change my password every week for no reason and i have different security questions for the same account

My account asks me to change my password every week for no reason and i have different security questions for the same account

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Try changing the security on the router. Start with no securty as a test.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How to set up a server for PPro editing (and AE finishing)?

Hello everyone,
I may be a bit offtopic with this question, but at the same time it's really related to PPro.
I never worked in any post-house facility, and I come from a very indy background, so I never had a chance to see any edit suite hook up to a server.
I am wondering how great it is, how it could help our projects? And also what are the basics to know, the stuff to avoid when you're a newbie like me (in term of server network settings)?
Right now, we're running 3 Mac Pros to edit our projects. They are all connected through Gigabit ethernet.
Our workflow involves that all Mac have the entire footage in there own drives. We're using the network only when importing new content to copy it on the 2 other Machines.
We found out that if we use Mac #1 to open a PPro project contained within Mac #2 drives (as well as the footage), it's okay but the performances are not as great as opening a project in its own drives.
So we try to copy (move) the projects in the right Mac before to work on it. Of course, everytime, we have to relink everything if we don't want Mac #1 to read the footage from Mac #2…
When it come to big projects, with lots of Red footage, it is a pain, and we usually end up using only one master machine for the edit, and it's only when it comes to finish in AE that we really start to split the project onto the 3 platforms.
So this is where the idea of a server comes in mind. Mac #1 would work on a project A, then when moving to work on project B, Mac #2 could open project A and keep working on it - no relink: the project AND the footage are all on the server.
That is my basic idea. Sound simple, but really I have no idea if it really works. Is it something I can really do on a server?
How the server really helps to keep the performance? If I see PPro's performance lowering down when accessing projects and footage from our actual simple network, is it going to be better accessing the same datas from a dedicated server.
I'm looking at the Mac Mini server with Lion Server. What Lion Server does that Lion OS doesn't do already?
I know, it sounds like completely newbie questions, but I honestly have no idea.
Can a Mac Mini with Lion Server serve the 3 Macs running Snow leopard? Or do we need to update them?
My idea is to use Pegasus thunderbolts for storage drives, plugged in the Mac Mini, then plug all the 3 Mac into the Mac Mini, with what I believe should be Gigabit Ethernet…
Am I right? A least a bit? What did I miss?
Thanks in advance for sharing your knowledge guys
Julien

If you are going DIY route, this is your only option: http://magazine.creativecow.net/article/build-your-own-affordable-san-that-iworksi
However that probably won't work with RED footage.

Same TREX server for KM indexing and e-Recruitment

Hi,
Is it possible to use the same TREX server for KM indexing on the portal and e-Recruiting searches on R/3?
Many thanks
Jane

Hi,
in general and from a technical view it's possible.
But it depends on the load of the applications, perhaps it's a better approach to separate them e.g. for a productive environment.
Regards, Thorsten

Using server for iTunes library and iMovie files

Hi!
I would like to use my mac mini server for itunes music, apps etc. that are now stored on my imac. Same for videos/files from imovie and itunes.
which files do I have to copy and do I have to make certain settings on the mac mini server and on the imac and macbook that I have?
Thanks in advance, Niels

Hi!
I would like to use my mac mini server for itunes music, apps etc. that are now stored on my imac. Same for videos/files from imovie and itunes.
which files do I have to copy and do I have to make certain settings on the mac mini server and on the imac and macbook that I have?
Thanks in advance, Niels

OS X Server For Cross-Platform Gaming Servers?

The only reason I have interest in running an OS X Server is for video game servers. I'm not familiar with OS X Server, but would it be able to run a video game server for a video game that is only for PC? How about a game for Mac and PC?

Under my advanced settings I have this...
[email protected], com.apple.idms.appleid.prd.427xxxxxxxxxxxxxxxxx5a3341513d3d
(In dont know what the com.apple.idms etc is - it was automatically inserted so I left it in)
I restarted the mail server and tried to send an email to [email protected] (after wiating 24 hours).
From gmail to [email protected] I get a bounce back to gmail saying...
<[email protected]>: user unknown
Final-Recipient: rfc822; [email protected]
Original-Recipient: rfc822;[email protected]
Action: failed
Status: 5.1.1
Diagnostic-Code: x-unix; user unknown
Is this a bug with the OS X Server 3.0.1 UI?
Paul.

Server for Web hosting and email (only for 3 domains)

Hello guys,
I want to setup mac mini server for my company which will host only 3 web sites and email server for the moment.
What i got so far,
01. I have Macmini server
02. I have static ip address
03. I have router (vigor 2700) which forward the external ip address (my ip start from 87.197.XXX.XXX) in to my Server using DMZ hosts
(So i have 192.168.1.20 as my server ip address(local) and when i point 87.197.132.48 from out side (using web browser) i can see Mac server page)
So can i setup the server using this infomation. Just want to make sure that i allready got everythign to setup the server.
1st question : Do i have to all information to start this ?
Please help me with this first, then i will have more questions latter.
Thanks in advance

Migrate out of 192.168.1.0/24 (and 192.168.0.0/24) as those will cause problems for your eventual use of VPNs to connect into your network. Most every coffee shop and home network on the planet uses those, and the IP routing inherent in a VPN doesn't appreciate finding the same subnet on both ends of the VPN. The earlier you get your network out of those particular subnets - and preferably over to a subnet somewhere within the 172.16.0.0/12 or 10.0.0.0/8 blocks - the easier the network migration will be.
Set up your internal DNS services and your external DNS services (I'm assuming your local DNS server will not be delegated to serve DNS publicly) and particularly establish an A record in (at least) your public DNS referencing your mail server, and then enter that mail server A record entry as the MX mail exchange host for each of the three domains, and set up three virtual domains on the mail server.
If your gateway is sufficiently capable, you can have a separate domain or subdomain within your network, and have all your "public" names hosted externally. You can then use example.com outside, and example.net inside, and any example.com references from the outside or from the inside will resolve to your external static IP address and (if your gateway has the ability to "reflect" traffic to the public static IP) it'll all work most easily. If your gateway isn't capable, then you can also host the example.com domain internally in your local DNS server, but that means maintaining two parallel sets of DNS entries. Or you can get a more capable gateway. (I did not research your gateway.)
You'll want to read the Apple mail service documentation around alias entries, as there are two ways to do this. See the stuff around pages 73 and 77 in that document. Better still, just skim that mail service administration manual; that'll get you an introduction to the whole area and some familiarity with the general terms and concepts, and that manual is fairly readable.
Then read the TopicDesk Spam Documentation.
If you don't have IT staff around (some of your time, as well as that of others) to dedicate to this mail server management (including user management, troubleshooting, backups, etc.) hosting mail externally can be a good trade-off.

Use MacMini server for windows apps and save for windows files ?

My question : Office equiped mixed computers , aslo Windows and Mac,
Could we use MacMini server for both machines, working by windows apps and / or to save and work with windows files on MacMini server and with Mac as well?
We woud use it for normal office work and get it by internet from other places as well
windows apps: merchandising, invoice, word, excel, pictures editing, Outlook Express + the Mac apps
thnx ,
MACIren

In general what you can do is: in OS X, use Windows in virtualization (aka emulation), as a "virtual machine" with VMWare Fusion, Parallels, or Oracle VM Virtual box.
That way you have both operating system open side by side without having to reboot into one or the other operating system.
Not sure whether you need a Mac Mini Server per se to do that, I do that with my MacBook Pro for instance. But the server would help since it has a quad-core CPU (more cores that you can dedicate to the virtual macine), and you can put the virtual machine on the second harddrive for better disk access performance. Was there some particular reason you were thinking of the Mini Server -- do you want to use server side Windows apps?
Again I have that setup on my MacBook Pro using VMWare Fusion with an XP virtual machine. In the Windows, I only use Office 2003 and some company apps that are Windows only. With Fusion (and I'm sure the other apps can do it as well) you can set a "shared" folder so both Windows and Lion will see the contents of it for reading and writing. I believe with Fusion you can also do your entire Home directory, but I prefer to limit it to a single shared "work" folder.

Silent installation + activation for CS6 design and web premium - volume license

Hi All,
I am having CS6 design and web premium - volume license and i am facing with a difficulty that we have to choose options for installation, also all of our computers are working behind proxy, therefore there is no direct internet which is causing problem with activation. Can you any suggest me away to implement silent install and activation without internet for bulk PCs ( about 500).
Thanks,

Can you login as the Hidden admin account and then run the installation,
http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/

Link broken for Adobe Reader and Runtime Software Distribution License Agreement download...

The link provided as part of the Adobe Reader and Runtime Software Distribution License Agreement, for downloading the PKG to mass-deploy Adobe Flash Player to my users (so I can update their machines to protect against yet another Flash exploit) keeps redirecting to typekit.com.
How do I go about getting the latest PKG so I can deploy the fix?

Can you try clearing your cache? This was indeed a problem earlier today (sorry!) but should be corrected now.
Thanks,
Chris

VCSE with dual NIC / SIP H323 encrypted call / traversal and non-traversal call license questions

Dear All,
I have a few questions and I would appereciate if someone will answer my questions?
1) May I know pros and cons of using Dual NIC and single NIC with VCSE in DMZ?
2) In order to make H323 and SIP encrypted call, what configuration need to be done on Cisco endpoint, non-cisco endpoint, VCSC and VCSE (both signalling and Media need to be encrypted).
3)let say my VCSE is in DMZ- endpoint A (cisco) and endpoint B (non-cisco) are registered on VCSE. I would like VCSE to use non-traversal call license when A call to B or B call to A regardless of whether H323 or SIP call.How can I force VCSE and endpoints to use non-traversal call. I only want VCSE to handle signalling and media is EP to EP direct. As traversal license is quite expensive.
I found following information from Cisco document.
all Cisco TelePresence endpoints are traversal enabled and so a traversal license will always be needed when at least one of the endpoints involved in the call is a Cisco TelePresence endpoint.
Is it possible to disable traversal client feature of Cisco endpoint?
Thanks and Best Regards,

voice register pool 4
add-->codec g711ulaw
voice register global
no create pro
create prof
and enable below debugs and send the logs
deb ccsip mess
deb voip ccapi inou
deb h225 asn1
deb h245 asn1

Lumira Server for BI Platform and Team/Edge consumption & licensing question

Similar Messages

Maybe you are looking for