JetAdmin 10.2 Report help on paper tray levels.

Hi,
Im having trouble creating a report of paper tray levels for our estate. I have added the fields to the collection OK and can generate a scheduled report at 7pm ok but unsure on what templates or fields i need.
Printers are all MFP - M9040 and CM6040's. All latest firmwares (jan 12)
I need to create a report that shows printers with a paper tray of "50 sheets or less" or "empty". Empty is most important.
I only need to show asset,device name and location and which trays this affects.
Example
Asset 123456 @ 1st floor west wing, paper tray 4 empty
asset 232322 @ 2nd floor central, paper tray 3 empty.
asset 212111 @ ground floor, paper tray very low / or 50 sheets
Im not sure if the printers can detect number of pages or just "very low".
Please help

I have created alerts based on Tray Threshold which is not what i want. These are flowing on a individual basis. I require "snapshots" at scheduled times. Say 1pm and 7pm of paper trays empty. Reason for this is our maintence company will change all the paper at lunchtime that is almost out or empty and our security guards change paper when everyone has gone home. Anything that occurs between these times is down to the users and would be minimal. I cannot be sending engineers out changing paper whenever an alert is raised, hence snapshots of the estate. Please help.

Similar Messages

Print crystal report in A5 paper tray

Dear Experts,
I am using VB.NET
We have different printers like "Lexmark Optra T612_DB", "HP Universal Printing PCL 5 (v4.7)", etc., in the network, there will be 2 or more trays for each printer. One of the tray has A5 paper in it. While printing Crystal report,
1. How to find in which tray A5 paper is present?
2. How to select A5 paper tray for printing?
If the above 2 are not possible with crystal report object:
1. How to print crystal report using PrintDocument object?
2. How to find in which tray A5 paper is present using PrintDocument object?
3. How to select A5 paper tray for printing? using PrintDocument object?
Currently with the following lines of .NET code, it is always printing in Tray 2
report.PrintOptions.PaperSize = PaperSize.PaperA5;
report.PrintOptions.PaperOrientation = PaperOrientation.Landscape;
Regards,
Eswar

Unfortunately, it will be up to you to find out what tray the correct paper size is in, then set that to the report. The CR APIs do not look up these values, they just expect you to know these and set them.
Ludek

Paper Tray designation from within the report

We are running XMLP 5.6.3 from within Oracle Apps.
Is there a way to designate a paper tray from withing the report?
We have the requirement for AP Check to print first page to Tray #1 and then all the following pages to Tray #2. Since we have different Header on the first page I was hoping I can insert some printer codes within to instruct the printer to get the paper from the correct tray.

doesn't support it right now. it will figure it out what tray if the paper is a different size but that's about it. you have two options, have two printers or no preprinted stationary. Most companies go with two printers.
Good luck,
Ike

How can I control paper tray selection from within a report?

Hello everybody
I need to print out a report (preferably in the PDF format) in which certain pages need a specific paper. I am therefore looking for a way to control the paper tray on per page basis. It seems hard to do even though there must be thousand of people out there with the same need - or please proof me wrong
I really appreciate any suggestions.
Regards from Zurich, Switzerland
Peter Buchmann

doesn't support it right now. it will figure it out what tray if the paper is a different size but that's about it. you have two options, have two printers or no preprinted stationary. Most companies go with two printers.
Good luck,
Ike

Select paper tray

Hello
I'm looking for a solution. My problem is, I have to print one Report on paper tray 2 and one simultaneous on paper tray 3 (As copy) of the printer. I take the procedure PROCEDURE run_report_object_proc(vc_reportobj varchar2, vc_reportserver varchar2, vc_runformat varchar2, vc_other varchar2) IS
v_report_id report_object;
vc_ReportServerJob varchar2(100);
vc_rep_status varchar2(100);
vjob_id varchar2(100);
BEGIN
case :global.sprache
when 1 then --deutsch
v_report_id := find_report_object(vc_reportobj);
when 2 then --französisch
v_report_id := find_report_object(vc_reportobj||'_F');
else
v_report_id := find_report_object(vc_reportobj);
end case;
set_report_object_property(v_report_id,REPORT_COMM_MODE,SYNCHRONOUS);
set_report_object_property(v_report_id,REPORT_DESTYPE,CACHE);
set_report_object_property(v_report_id,REPORT_DESFORMAT,vc_runformat);
set_report_object_property(v_report_id,REPORT_SERVER,vc_reportserver);
set_report_object_property(v_report_id,REPORT_OTHER,vc_other);
vc_ReportServerJob := run_report_object(v_report_id);
vjob_id := substr(vc_ReportServerJob,length(vc_reportserver)+2,length(vc_ReportServerJob));
web.show_document(:global.rw_servlet|| vjob_id ||'?server='||vc_reportserver,'_blank');
END;
How can I do this?
Thank's for your help
René

Hi Peter
Thank's for your tip. I have looked at my report, but I don't find the property, where I can set 'SRW.Set_Printer_Tray'. Or is it a trigger and who must be this trigger and kind of trigger?
Have you more information for me or an example?
Thank's

Workaround for Reader 10.1.2 print "Duplex setting/Printer Blinking/Paper Tray" issue

Dear users,
We have been receiving feedbacks from our users related to the recent "Duplex setting/Printer Blinking/Paper Tray" problems faced.
A lot of these issues have been faced due to introduction of "Print on Both sides" setting right on the Print Dialog in order to help our users set this option without having to go to the printer properties dialog. However, we have made this option as default ON and hence users have reported problems described above.
Thus, we request you to please try unchecking this setting to OFF state and then print to see if that resolves the problem faced.
Thanks,
Atul Agarwal
Adobe Systems

You can easyly solve this with the following procedure:
Open your Windows Group Policy Editor, chose "New Group Policy", go to UserConfiguration->Settings->Windows Settings->Registry. Right click "Registry", chose "new-> registry assistent", local computer, go to
[HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\10.0\AVGeneral]
"iDuplexMode"=dword:00000002
(mark only "iDuplexMode" !)
and click "finish".
Doubleclick that new entry down till you see "iDuplexMode", double click it too, and change the REG_DWORD value into "1" (decimal). At the very top I also chose "replace" under "action" (not sure if really needed)
Close the GPO editor and link that newly create group policy to you domain or OU or whatever.
You can make a "gpupdate /force"at a client to see the reg entry changing from "2" (= dublex) to "1" (=non duplex).
Reboot your clients or just wait your personal "gpupdate time period".
Thanks Adobe for that setting!
BTW: You can also config that with the "Adobe Customization Wizard X" and save it in a .mst file to roll out your installation with Active Directory software distribution or your favorite tool. Unfortunatly - as it is an entry in HKEY_CURRENT_USER - this hive is only load after log in and it is not present during bootup installation, so your setting gets lost.
You can do the same for Adobe Acrobat X, if you need. The Key is:
HKEY_CURRENT_USER\Software\Adobe\Acrobat\10.0\AVGeneral]
"iDuplexMode"=dword:00000002

Restrict printing a report on physical paper

HI All
I am generating online report from my Forms 10g application in the web browser in PDF format.
Now I want to restrict the user to take print of that report on physical paper based some application restrictions.
How do I achieve this?
Thanking You

Hi Oais,
I have a payroll report that should be printed on a sheet that is very large in width..even bigger than A3.
The client says thay are going to print it on paper rolls or something.If the client wants to print on whatever we developers do not have a problem.
We just need to adjust the width and height as required and then develop the report as required.
To set the width or height from Object Navigator, Under Layout Model you can find Header Section, Main Section and Trailer Section, just set the width and height as required.
Hope this helps.
Best Regards
Arif Khadas

HT4356 I have just updated my Epson printer to one which supports air print but consider it to be a waste of money as my printer has two paper trays and there is option to choose which try...just "print" How can I print photos via AirPrint from photo tr

Hi,
First-timer on this...Just updated my printer which was less than one year old, to one which had Air Print capabilities. This one is the Epson XP605 which has two trays, one being for photos. Each time I tried to Air Print a photo, it printed from the A4 plain paper tray instead of the Photo Tray.Twice...then I came into my study and changed the printer settings to Tray 1 (photo tray) Photo paper, size 5x7 and Photo Best, but still it printed on plain A 4 paper. Would be most grateful for any help, although I did read on one Apple site that AirPrint may not be able to choose trays!!!! "may not"?? Thanks

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

Paper tray won't close

HP Color LaserJet CM2320nf MFP printer:
So, I put more paper in the paper tray and closed the drawer as usual. Only the drawer will not close. I have looked inside to see if there is anything visible that would prevent it from closing. I see nothing. Without paper, I can't print easily (just with a couple pieces of paper). This is wierd. Has never happened before.
I have turned off and on the printer, not that that would help -- but the paper tray will still not slide into the printer.

Hi tonjalr,
Welcome to the HP Forums!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
I worked on behalf of HP

HP 6525 Paper Tray

I had no problem setting up the Photosmart 6525 and it printed a test photo and worked fine for a month, but now when I keep getting a message telling me to reinsert or lower the paper tray. The photo tray is on top and the paper try on the bottom. I cannot figure out any other way to reinsert the paper trays than the way they are in right now. Now it will not print from either tray. Solution is probably simple but I can't figure it out. Help.

@wildcatjim,
The guide is a general reference document which shows the areas to check to try and resolve the error you are receiving. Take a look on Page 37 of your User Guide, I understand you are not getting a paper jam error however the illustrations will show you the paper trays and the cleaning recommendations which may help.
If your printer is still in warranty, I would contact our technical support at 800-474-6836, as it may be the hardware. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thanks for your continued efforts!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

PAPER TRAY SUCKS. CANNOT PRINT OUT PHOTOS, TRAY ONLY ACCEPTS PAPER FROM BOTTOM TRAY. GRRRR.

My BRAND NEW (One week from delivery) no longer prints out photos. It printed out photos several times but 3 days' ago it stopped.
The paper tray is malfunctioning. Each time I try to print out a photo (remember, it's been done several times until a few days' ago) THE TRAY WILL NOT ACCEPT PAPER FROM THE TOP TRAY!!
SELECTED PHOTOS PRINT OUT ON PAPER FROM BOTTOM TRAY ONLY!! MY INK AND PAPER IS BEING WASTED AND SEVERAL OTHER POSTERS ARE EXPERIENCING THE SAME ISSUES WITH THE HP 6520!
Is one of those infamous 2-hr. long marathon phone calls to Tech Support in India the ONLY way one can sensibly have an HP issue resolved?
This is ridiculous!

Hi,
Sorry to hear you are having problems printing. What device are you using to print?
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Paper tray error message HP LaserJet 1102w

Recently my LaserJet 1102w stopped printing duplex; instead, after printing the first side it gives an error message : Paper tray needs to be filled.
The paper tray is full, but I cannot get it to continue printing the other side, no matter what. This has become a huge problem, even when printing single-sided jobs.
Any ideas?
This question was solved.
View Solution.

Hi,
Once you place the printed pages back in the input tray, try opening and closing the top cartridge access door to rsume the print job and check if that prints the other side.
Hope that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Officejet Pro 8600 Plus Paper Tray Jammed crooked in printer

Paper tray is jammed crookedly in printer. It will not come all they way out of printer and will not completely close (remains 1 1/2" Exposed. How do I remedy?

Hello @LadyLou1, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing jam issues. I'd like to help!
I would recommend starting by removing the ink cartridges, and performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest following the steps laid out in this document:
A 'Paper Jam' Error Displays on the HP Officejet Pro 8600 e-All-in-One Printer Series
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Officejet Pro 8600 Plus ...paper TRAY wont close all the way?

My Officejet Pro 8600 Plus paper tray will not return to the proper position. This has happened TWICE now, and always about 3 weeks into using it...
I returned the first printer and replaced it with the same because we love the features and ease of use. But now, AGAIN??
I tried printing with it hanging out this time..it will print, but ....COME ON! It makes it real hard to pull out the tray that my paper lays on after printing!
I called HP support the first time, he couldnt help me. Just said replace it. There has to be something I can do a button or something? I cant see it..does anyone else know?

Zadora wrote:
Unofrtunately useless information. By trial and error I have found the only way to replace the tray is to lift the entire printer from the front at about a 20 degree angle and then the tray slides in. Very defective design. Never buy another HP.
It is possible you have a defective unit, I would suggest you Contact HP for service.
It may not be any consolation for you, but the tray works fine on my Officejet 8600 Pro Plus.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

My Canon MX922 printer has stopped printing because it says the paper tray is empty. Tray is full.

My Canon MX922 printer has all of a sudden stopped printing and I'm getting the error message that the paper tray is empty. The tray is full. I've removed and replaced several times. I've loaded the top feeder as well in case for some reason it was trying to pull from there. I've shut down and restarted several times as well, to no avail. I work from home and this is my own business so it's vital I have a working printer. Any suggestions as to what the problem is or is the printer shot? I've probably had it just over a year.

Hi nicolej31,
You will want to ensure that there aren't any obstructions in the paper feed path that may be causing the paper not to feed and be recognized by the printer. With a flashlight or other bright light, please check the paper feed areas of the printer to ensure no obstructions exist. Once this has been done, please perform a roller cleaning on the unit by following the steps located here.
You will also want to ensure that the paper type and size selected in the printer driver is applicable to the cassette tray that you are trying to print from. For information on which paper sizes and types to load in each cassette tray, please click here.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

JetAdmin 10.2 Report help on paper tray levels.

Similar Messages

Maybe you are looking for