Paper tray error message HP LaserJet 1102w

Recently my LaserJet 1102w stopped printing duplex; instead, after printing the first side it gives an error message :  Paper tray needs to be filled.  
The paper tray is full, but I cannot get it to continue printing the other side, no matter what.  This has become a huge problem, even when printing single-sided jobs.
Any ideas?
This question was solved.
View Solution.

Hi,
Once you place the printed pages back in the input tray, try opening and closing the top cartridge access door to rsume the print job and check if that prints the other side.
Hope that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Receiving a false paper jam error message for a 6310 all in one printer

    I have an hp 6310 all in one printer.  It is showing a false paper jam error message with no paper in the printer.  I have tried all  of the fixes that have been suggested on the website as well as on you tube to no avail.  Nothing works, I have cleaned all of the parts that have been suggested to clean and reset the printer. I am still receiving the same paper jam message with no paper in the printer.  Does anyone have any suggestions to try to fix this printer. 

    Do you here any clicks or other sounds when the 6310 first starts up?
    I'm trying to fix false paper jam error on Sharp Fax/copier,F0-4450.
    When researching the problem, found suggestion that a bad solenoid could cause that error. 
    After completely disassembling the copier found that wasn't the problem.
    I here 2 clicks during start up that sounds like gear slipping a tooth, as if something is preventing a shaft from turning.
    Back to the drawing board.
       UPDATE!!! Took fuser out, turned gears with screwdriver til 81/2x11 paper went thru, lubricated ends of fuser roller with powdered graphite lube.
    3 page fax came thru.

  • Paper Jam error message due to broken gear on Officejet Pro 8500 all-in-one printer

    3 year old HP Officejet Pro 8500 all-in-one printer (haven't used it much). Keeps telling "Paper Jam" although there is no paper jammed anywhere (searched meticulously with a flashlight after watching HP's tutorial videos on how to clear paper jams). I started searching on the Internet and found a couple of related videos on Youtube that pointed me in the right direction:https://www.youtube.com/watch?v=PMFW1RRlDHEhttps://www.youtube.com/watch?v=EwbF2Vs_0gQ  I could hear a clicking noise on that area of the printer each time I turned it on, so I carefully took the black cap apart that was hidding the gear, and confirmed I had the same problem as in the youtube videos above. See picture below showing the white plastic gear part that has a large crack which causes the Paper Jam error message and renders the printer unusable. After Googling a little bit, seems like a relatively common issue and wonder why such a part like that is not made of a stronger material like metal (planned obsolescence maybe?). Does anybody know if there is a way of replacing the broken gear?  (I really care for the environment and I would like to avoid having to throw the relatively new and expensive all-in-way printer away) Thanks a lot in advance for the advice!

    Hey ,  Thanks for posting in the HP Support Forum.  I do see that a cracked gear in your HP Officejet Pro 8500 All-in-One Printer is impeding all functionality.  I would like to help you with this but that particular part is not replaceable.  I recommend you reach out to our tech support team to find out what servicing options you have available. You can click on the following link to initiate a case: www.hp.com/contacthp/
    Once you fill out the online form to create your case you can choose from different direct contact methods. I hope this helps. Regards, 

  • Unsupported black in use error message for laserjet p2055

    Receiving "unsupported black in use" error message for laserjet p2055.  I replace the cartridge with a new one and the same message appears.  Any suggestions how to resolve this issue?

    Hi,
    Does it become active if you go to System Preferences > Accounts and Click on the current Account Pic and attempt to take a Pic ? (you do not have to Set it as the Pic)
    Go to System Preferences > Accounts
    Click on Your Account (in the list on the Left)
    The Right hand side will now show some options.
    Clicking the current Pic will give you access to Edit Pic
    One of the Options then is to take a Snapshot.
    Take a Snap Shot but you do not have to "Set" the Pic.
    This process will invoke VDCAssistant.
    Explain further about the PRAM Reset please.
    You should shut down the computer (Rather than trying to catch the Restart)
    You should then Start the Computer holding down the AppleALT+PR keys and keep holding them until you hear three Start Up0 Bongs (Chimes)
    This deletes some settings such as System Preferences Settings for the Volume (Sound) and Date and Time that may need resetting afterwards. (Others may also be effected such as Screen Saver)
    On Spotlight.
    This does not look or report on certain Folders.
    At the Hard Drive Level this is Library and Syatem
    In your Home Folder (Little House icon) it will not look in your Library.
    com.ecam.iusbcam.plist and com.apple.ichat.plist
    Are in your Home Folder/Library/Preferences
    The Others are in the /Library at Hard Drive Level
    7:15 PM Wednesday; June 3, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • False paper jam error message on Officejet All-in-Ones

    I've been helping a not-so-techie friend with his J6450 false paper jam errors.  He's now on his second one (got replacement from HP) and has same exact problem.  (We think the paper sensor is getting stuck and causing error message.)
    His problem is by no means unique.  I have looked at customer reviews for this printer on many vendors' websites, and have seen horrible reviews of HP's all-in-ones because of the false paper jam error message.  By the way, none of the suggestions here seem to fix the problem, so don't waste your time uninstalling and re-installing the software.  The problem is mechanical.
    With so many posts regarding false paper jam errors on these HP All-in-Ones, HP should replace these printers with a different model that does NOT have this problem, if such a model exists, at no charge, of course.  

    I have just spent the last 3 hours thinking I have been overlooking paper somewhere in my J6450 after consistently getting a paper jam error.  Of course my warranty has expired!  Just wondering if it would be worth fixing OR NOT?

  • Photo tray paper won't load. Paper tray empty message received

    Photosmart Plus B210 - Error Message when sending photos to print by wireless 'Paper Tray empty' even though phototray fully loaded.
    Printer about 6 months old and has performed ok up until now. Normal printing on A4 OK
    Using MS Windows XP
    Any suggestions

    Hard Reset – While printer is powered ON, pull
    the power cord from the printer then from the
    wall. After 30 seconds reconnect power to
    wall and printer. This will trigger a ‘dirty power
    up’ and restore the printer to a known good
    condition (if it is possible). No user settings
    are lost with a ‘hard reset’.
    This ‘Hard Reset’ is one of the most powerful
    tools to use when the printer hardware is not
    functioning properly!
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • Paper mismatch error message on hp7500a when using eprint

    I have an HP7500A wide format printer
    When I send pictures from my phone to the printer via eprinter, I get a error message on printer 'Paper Mismatch'.
    Paper size or type incorrect.
    Yet when I check the settings it is set to A4, which is the paper I use.
    Could anyone explain what I need to do to rectify this problem ?
    This question was solved.
    View Solution.

    Hello Nashy58,
    The issue is in how ePrint works with the PhotoSmart printer line.  When you send a photo to the printer via ePrint, ePrint will print to the photo tray automatically.  Right now there is no way to change this.  To print a photo to plain paper via ePrint, you would have to put plain paper in the photo tray, which I would not recommend since it was not designed to handle that paper type.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Cannot add printer- get error message.  LaserJet 1200

    I recently bought a dual powered MacBook. It was working perfectly, and finding my printer both attached by USB, and wirelessly. It shows up as Bonjour LaserJet 1200. Suddenly, it stopped working, and cannot be added to the printer list. I get an error message,"client error message too long", or some other nonsense. I have several other computers, running OS X, and none of them have any problem sharing the printer, which is connected to an Airport Extreme remote base station. I have tried everything, and come up with no success. So eventhough the printer is recognized, with its address, and is sharable, it suddenly and without cause, cannot be added to the printer list, and thus I cannot print. Any suggestions. Peter
    Recent Dual MacBook   Mac OS X (10.4.8)  

    I did. before and I did again. and then uploaded and installed new software and STILL get error 1282. the hp people told me there is nothing they can do it's an apple problem. I'm stumped. If you can think of anything else would appreciate it.

  • Cannot enable ePrint Web Services - get internet connection error for HP LaserJet 1102W

    I have a HP laptop running Windows 7 Professional 64 bit.  We just changed over to Comcast internet service from AT&T where my HP LaserJet 1102W was set up for ePrint.  After several hours, I was finally able to add the 1102W printer to the Comcast network, access the Embedded Web Server tool and print wirelessly but I cannot set up ePrint.  I have deleted the printer but cannot get it to connect to Web Services.  I keep on getting:  Connection Error. Check Internet Connection but again, I can print wirelessly successfully to the printer but would like to be able to set it back up for ePrint.  My Comcast router is an Arris TG862.
    I have updated the firmware and used the HP Print and Scan Doctor tool but still am not able to get the ePrint Web Services to connect.  Here is the information from the Networking page of the EWS:
    IPv4 Configuration
    Warning: A change in the IP Address will result in loss of connectivity to the browser.
    IP Configured By: DHCP
    Host Name: NPIC968F8 
    Domain Name:  hsd1.tn.comcast.net.
    IP Address Configuration
    X Automatic IP Manual IP
    X DHCP
     BootP
    X AutoIP
    Manual IP Address:10.0.0.89 
    IP Subnet Mask: 255.255.255.0
    Manual Default Gateway: 10.0.0.0
    DNS Address Configuration
    Preferred DNS Address: 75.75.75.75 
    Alternate DNS Address: 75.75.76.76 
    WINS Address Configuration
    X Automatic WINS Server
    Manual WINS Server
    Manual Preferred WINS Server: 0.0.0.0
    Here is my ipconfig information:
    Wireless LAN adapter Wireless Network Connection:
       Connection-specific DNS Suffix  . : hsd1.tn.comcast.net.
       Description . . . . . . . . . . . : Intel(R) Centrino(R) Wireless-N 1000
       Physical Address. . . . . . . . . : 8C-A9-82-A3-F9-5E
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::c57:eb2b:5144:2ea5%13(Preferred)
       IPv4 Address. . . . . . . . . . . : 10.0.0.3(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Lease Obtained. . . . . . . . . . : Friday, March 29, 2013 1:24:52 PM
       Lease Expires . . . . . . . . . . : Saturday, April 06, 2013 11:09:24 AM
       Default Gateway . . . . . . . . . : 10.0.0.1
       DHCP Server . . . . . . . . . . . : 10.0.0.1
       DHCPv6 IAID . . . . . . . . . . . : 378317186
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-CE-4E-8C-10-1F-74-11-22-71
       DNS Servers . . . . . . . . . . . : 75.75.75.75
                                           75.75.76.76
       NetBIOS over Tcpip. . . . . . . . : Enabled
    There appears to be a known issue with the Arris TG862 router and supposedly a new firmware is to be released soon but just checking to see if anyone has been able to resolve this issue.
    Thank you!

    Hi Surf1981,
    I understand that you're not able to enable web services on your printer.  I would try steps listed below.
    1. Open an internet browser type printer's IP address.
    2. Should bring you to the printer's status page.
    3. Select networking tab at the top.
    4. Left hand side select Network Identification.
    5. Under DNS address Configuration select Manual DNS Server.
    6. For Preferred enter 8.8.8.8
    7. For Alternate enter 8.8.4.4
    8. Select apply. You might get a warning saying this could interrupt connection that's fine.
    9. Turn printer off for about 30 seconds then try again.
    **If you find this helpful or want to say thanks make sure to click the white star under my name to give me Kudos. **

  • 'Paper Mismatch' error message on HP Photosmart 6510

    Hi,
    I seem to keep getting the error message 'Paper Mismatch' when trying to print on my HP Photomsart 6510, I have read your forum regarding this message but that doesn't seem to help me. It seems to work fine when i'm using standard A4 paper, but I want to print on a slightly thicker paper GSM 80, and it used to work fine - but all of a sudden it keeps giving me that error message. When I changed the printer settings to 'custom' as suggested, it did print - however the document went a funny angle and didn't print properly. I would really appreicate your help on this.
    Thanks.

    I will do my best to try to think of something that is not in the previous forums.  Tell me, what kind of software are you printing from (ex. Word, Adobe, etc.)?  Quite often there is a template within the software you are using.  For Word, select the Mailings Tab and check in envelopes or labels for that exact paper type.
    Is your operating system Windows 7, XP, Mac, etc?  I hope I can guide you to the proper setting but I will need to know more.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Wrong automatic paper tray selection in HP LaserJet M3035 printer.

    Hello,
    I have a printer (this one http://h10010.www1.hp.com/wwpc/us/en/sm/WF06b/18972-18972-3328064-12004-3328083-2512333-2512337-3435... ) shared in Active Directory by several users (running Windows XP machines). The thing is that no matter how many times I try to set the source paper tray to a specific one, it seems it doesnt apply/store the changes, and it comes back to Auto tray selection  (and it always selects tray #1, which is the one im trying to avoid), causing an issue which needs to be solved by hand.
    Thanks a lot in advance.

    1. Go into your SETUP MENU on your printer.
    2. Choose PREFERENCES
    3. Choose DEFAULT TRAY.
    Try it and let me know what happens, thanks.
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • HP Officejet Pro 8500 , false paper jam error message, small plastic piece broken

    product : HP Officejet Pro 8500 All-in-One Printer - A909a
    OS : NA
    Error : (fake) paper jam on printer screen
    I made no change before the issue. It occured while printing 2 pages. The first one was ok, the second one never shows.
    First I spend many time searching after the paper, cleaning my printer etc...
    Then I looked on the internet for advices, ideas etc.
    Endly I found this video : http://www.youtube.com/watch?v=PMFW1RRlDHE
    I checked my printer and I saw the exact same piece as in the video broken...
    I don't print often and I must say that I'm shoked that because if a f... piece worthing nothing all my printer and all the functions are unusable...
    I tried the support to obtain information on how to get this piece replaced. All I got is an automated message saying banalities (expired guaranty) and other links to unrelated things.
    Fortunately there was also a link to here...
    Thanks.
    ps : My feeling is that this piece is made to fail if I believe many post often seen on google (look comments on the video)... 

    The very same thing happened to my 8500 WIreless.  I was printed a two page document and only one page came out.  since that time the printer is stuck in the 'Paper Jam' state.  Call it false or fake, it is simply inaccurate.  I watched the video and located the gear that breaks.  I opened the cover, stuck screwdriver in the sensor to make it think the cover was closed and watched it cycle.  I can clearly see that the white gear on the left is cracked, in fact separated.  The cycle causes the gear to rotate so I could get a good visual on it, even inside it's black housing.    I will now begin my hunt for repair options.

  • PSC 1350 Paper Tray Error

    My 1350 printer shows the "E" error light on starting up, i.e. printer requiring paper, although there is paper in the tray.  Of course the printer will not then work.  I have tried switching on and off, also removing the paper and re-inserting but still the light stays on.  Any suggestions ?

    Hi,
    Once you place the printed pages back in the input tray, try opening and closing the top cartridge access door to rsume the print job and check if that prints the other side.
    Hope that helps,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Paper jam error message - HP Officejet 8500 pro - please help, deployed no return option

    You may have solved this now but this problem seems to be inherit to the HP design. I have it also after 6 months of operation.   I have downloaded the new firmware and it does not help.  I have found a  symptom of the problem is the arm does not drop down and the paper does not feed.  Then, loud clicking noises take place and a "out of paper" error happens.  Countless calls to HP does nothing to solve this.  One partial fix I tried after reading it here is to set your paper settings for " HP Premium Inkjet Paper" This seems to work but the printing is at a much slower rate.  Not a final fix. I have been trying to work with HP, but they are making it very difficult to stay with them.

    don't buy it. I had the paper feed problem - now a paper jam message (with no paper jam) - and HP is not interested in my business.  I installed this on 1/22/2010 and after about 300 pages, it is unusable.  (and "out of warranty")  Ridiculous.  I have gone back and forth with HP over the past 3 weeks and I have no progress to report.  Sad.Excellent history with 970 - 970Cse - 7310cxi - and coutless printers before that.  WHAT HAPPENED???ok - done venting I think. I don't know how to fix this - HP doesn't seem to know what to do besides replacing it with the same model that eventually has the same problem.  I will keep watching this in case there is real progress on this issue.  In the meantime, I fired up the 7310 and will NOT buy another HP unless I hear that they have their act back together.  (If they take too long, I'll go to Consumer Reports and pick the best printer there (non-HP)) Good Luck

  • 79 Service Error Message for Laserjet Pro200

    I've been reading the website and attempted to follow suggestions. 

    Hi,
    Error 79 is a communication Error, please go through the link it speaks about the issue
    http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/Printer-displaying-79-error/m-p/3901556
    Hope this helps
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Maybe you are looking for