Job Activity shows Succeeded but Backup Report show nothing

Greetings -
I usually view Backup Reports under the Availability tab in EM and noticed that my latest incremental backup
was not listed at all - nothing.
I went to the Jobs link and under Job Activity I can see that the job Succeeded and the next run is scheduled as expected.
The previous run of this incremental backup was run two days ago and it shows that it Completed in the Backup Reports page..
Any ideas on how to correct this ?
Thanks in advance.
Brian

In addition, when I get info on the account and look at all messages on POP server, they are all there as new messages and when I select ones removed from my mac or downloaded to my mac are blank....
So it is reading the messages, just not retrieving them.
What can cause this to happen and how can I fix it?

Similar Messages

My iTouch will not show movies, but they are showing on my iTunes. When I try and play them through my iTunes it freezes on me and does not work.

My iTouch will not show movies, but they are showing on my iTunes. When I try and play them through my iTunes it freezes on me and does not work. This problem only occurs whenever I am using my netbook. It doesn't happen when I use a different computer. I tried uninstalling and reinstalling itunes and am not sure what else to do from here.

You may have transferred all your songs, but your iPad is seeing the library as a different entity.
The following article(s) may help you.
Moving your iTunes library to a new computer

TM backups succeed but won't show up in TM App since 10.5.7 update

So, I have mounted the "sparse bundle" file and can see all the backups going back to the beginning. And, the TM pref-pane indicates that its aware of backups going back to the same date by showing the oldest backup date as the same as the oldest actual backup in the sparse bundle.
The trouble is that the Time Machine App won't browse the backups.
I've done a verify and repair on the sparse bundle volume and no errors were found. I can open the sparse bundle and browse the backups through finder without issue (within the small sample I checked).
I've removed and deleted the plist file without any change in behavior.
The USB disk I'm using is a 650GB drive having about 203.2GB free at this moment.
I have run Disk Utility against both the drive and the sparse bundle and both are clean and clear of errors.
While its not critical right now... and I feel pretty comfortable that the existing backups are good... it is troubling that I am not easily able to get files out of the backups with Time Machine, it suggests that the recent backups might not be as good as I might need at some critical moment..
Any one have any additional things to try. If this continues to be a problem I'm going to take this drive and retire it and switch over to a new drive (750gb) and start over (or perhaps try copying the back up files from one to the other.)

TM keeps the backups for each Mac separate, and normally only shows the ones for the Mac it's running on, even if there are other Macs' backups on its disk/partition.
Also, sometimes TM will start a new "sequence" of backups, as if they were from a different Mac.
To see these "other" backups, you need the (badly named) +Browse Other Time Machine Disks+ option. It's available by holding down the Option key while selecting the TM icon in your Menubar, or by control-clicking (right-clicking) the TM icon in your Dock.
You'll see a selection screen showing all the disks/partitions that have TM backups on them. Select the one you want, and you'll be taken to the normal TM "Star Wars" interface, where you should see all the backups on that disk/partition.

Installed Sharepoint 2010 Server SP2 Update; PSConfig succeeds but CA still shows "Upgrade Available"

I have installed SharePoint 2010 Server SP2. Central Administration shows the configuration database is at 14.0.7015.1000. I had to run PSConfig several times before it completed successfully due to missing features, setup files, etc. But
I got those cleaned up and finally got PSConfig to complete.
However, when I go to Farm Information it still shows "Upgrade Available" for the single WFE server we have.
When I run stsadm.exe -o localupgradestatus it shows me the following:
[2] content database(s) encountered.
[0] content database(s) still need upgrade or cannot be upgraded.
[23] site collection(s) are contained in the content databases.
[0] site collection(s) still need upgrade.
[53] other objects encountered, [12] of them still need upgrade or cannot be upgraded.
The 12 objects that cannot be upgraded are ancillary databases like:
StateService_[GUID]
Secure_Store_Service_DB_[GUID]
PerformancePoint Service Application_[GUID]
They all show "Cannot Upgrade" for the status.
Am I correct in thinking these are what's keeping the status at Upgrade Available? And if so how can I resolve?
If not, what else can be done to change that Upgrade Available status?
My goal is to get SP2 and the latest CU applied before trying to reinstall the User Profile Service.
Thank you.

use psconfig via command line:
> PSCONFIG.EXE -cmd upgrade -inplace b2b -wait
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Why MSAccess database shows data but does not show columns and DDL in edit mode in jdeveloper?

Sir,
My developer ver is 12.1.3.0.0.
I create a connection to MS Access database, this database shows data as bellow in jdeveloper databases window
But when I open any table in Edit mode like bellow it does not show any columns and DDL and give an error like bellow
Similarly when I try to create view objects on these tables then on data controls the view object also doesn't show any columns like bellow
What could be the reason any help on this issue
Should I use MS Access or not but I want to use ms access for very small databases.
Regards

If you look into the certification matrix at Oracle JDeveloper and ADF 12c (12.1.3) Supported Systems
You'll see that ms access is not supported.
You can use oracle xe which is free for your project.
Timo

IPod shows up, but won't show content

Hi,
I'm having this problem, when I plug in my iPod, it shows up in iTunes and syncs successfully, but the content on the device does not show up (like "Music" or "Videos" under the iPod section).
Message was edited by: botboy217

I have a similar problem. Because space on my hard drive was growing slim, I moved my iTunes music library to an external drive. Since then, iTunes appears to think that the songs are on my iPod, but it appears that only the titles are there, for, in iTunes, when I have my iPod mounted and selected, the titles all appear in the list, but at the bottom of the window, there is hardly any memory used on the iPod (despite what used to be about 26GB).
I've tried changing the iPod preferences and even restored the iPod, only to find the same thing. The iPod mounted with the same name as previously, and the same thing happened....

Drives mapped via GPO, NET USE shows mapping but doesn't show up in Explorer - Win 8.1

Fresh install of Windows Enterprise 8.1
Connected PC to domain, logged in, drive mapping worked as it should.
Rebooted a few times after installing software that I normally install on my computers (from the same sources/locally from my file server, etc). Rebooted a few more times all is well.
A few reboots later, the only drive that is mapped is X: which is my user drive done via the user profile in AD. The rest of the mappings that normally show up done by the GPO no longer show up.
After some digging, and noticing no errors in any logs I ran NET USE in a CMD prompt window, low and behold the drives are actually mapped and I can access them via the CLI without issue. I can navigate via their mapped drive letters, etc.
They just don't show up in Windows Explorer at all and I cannot navigate to the drive letters via the address bar. Strangely enough, it still kinda works since the Downloads start menu item is mapped to a network drive and that still works (Q:\) and
Chrome can access it as well if I try to download something.
I'm really not sure what else to check/try here.
Have other Windows 7 and Windows 8.1 machines (my laptop) and all works just fine, so it's only this specific install on my desktop that is showing this issue.

Hi,
There are several reasons causing the issue:
First, The problematic client doesn't reconnect to the target share at logon.
Please follow the steps to re-configure the mapped driver on the client and then check if the issue will re-occur.
Steps:
a. Open "My Computer"
b. Click on "Tools" and then select "Map Network Driver"
c. input the \\ipaddressofserver\sharename to give the path of the share
d. Check "Reconnect at logon"
e. Drive gets mapped
f. Double click on the drive to check.
Second, Antivirus software or Windows Firewall may block the mapped share.
If there is any Antivirus software and the Windows Firewall is enabled on the problematic client. If so, please disable them to check if the issue can be resolved.
Third, Fast Logon Optimization is enabled on the clients.
The fast logon feature may affect the display and drive letter assignment of a mapped network drive. As a result, the drive may have been mapped; however, the user on client cannot see it in Windows Explorer. He may recognize it as a failed network drive
mapping. This is the reason why we usually suggest you to disable fast logon on the clients via a GPO, and please check if the mapped network drive will be occur under this circumstance.
Please also configure the following group policy setting to disable Fast Logon Optimization to see if the issue still exists on the problematic clients.
Computer Configuration\Administrative Templates\System\Logon\Always wait for the network at computer startup and logon
If we cannot get this issue fixed, please post back the event log related to this issue.
Kate Li
TechNet Community Support

Open iTunes Store for latest TV Shows and it shows noting but kids TV Show

I open iTunes store and then tv shows and it opens directly to kid shows and not regular shows as it has always done, like ABC, CBS, and Fox. Is there some crazy setting that needs to change or is this some promotion to buy kids shows right now?
Thanks for the help!

You are not alone, mine started doing the same thing last week and I have been over every inch of my settings with no luck. It is obvious someone did something wrong at iTunes and has messed up the TV Shows display. The other areas seem to be fine, just the TB Shows that is broken (unless you happen to be a 4yr old customer).

CC App shows Acrobat but actual install has nothing

In the upper right-hand of my Mac, the CC app that runs there in the "toolbar?" displays the Adobe Acrobat icon, fully updated. But Acrobat does not work on my computer.
So I went to look at the actual installation and there is no Acrobat installed there. Not even a partial version or a screwed up version. Nothing.
I've done a spotlight search and it's not installed anywhere else on the computer either.
What is going on and how do I fix it?
I hate to even type this for fear it will lead someone down a rabbit hole because I really don't think it's relevant. But FWIW, which I think is nothing, the entire Abobe CC installation happens to be on an external drive. This has never caused a problem for any other of the 11 Adobe CC apps I've downloaded, BTW. And it's a necessity for lack of hard-drive space right now. Also, I don't have this problem on my second computer on which the Abobe CC suite is also installed on an external hard-drive.

Moving this discussion to the Creative Cloud Download & Install forum.
Diedre please see CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html which discusses the difficulty which you are currently experiencing.

AssignedTo showing multiple times on report

I was tasked with creating some reports from Service Manager using the cubes. My boss wanted a report that showed all active tickets, showing from high to low the analyst, then the category, then the user.
I used the following Fields:
IncidentStatusValue in the Column Label
IncidentDimCount in the Values
AssignedToUserDim.DisplayName, IncidentClassificationValue, and AffectedUserDim.DisplayName in the Row Labels.
The report looks exactly as I want it to.
The problem is that the data is wrong on several levels.
Issue 1: It shows multiple entries for the AssignedToUserDim.DisplayName
I changed the names, but if I click on the number 1 next to Joe User(Affected User) for either Analyst1 or 2 a tab open with IR48005. Basically the two analyst both show an active ticket assigned to them, when only one of them should.
Issue 2: The Grand Total that is calculated by the PivotTable is incorrect. I copy and paste the same numbers into the cells next to the PivotTable and the total is something completely different.
The weird thing about this also is that when I did this 20 minutes ago before writing this post, the Autocalc showed 130.
The first issue is more important than the second issue. It is not just this report and I have tried using many different values only to get the same duplication. Its almost like the DataWarehouse is not actually deleting the previous AssignedTo
user. The history in the actual ticket shows that it should be, but the reports show something different.
This then throws off every report I try to make. I made one for totals tickets per analyst and I noticed that I got credit for closed tickets that I had previously reassigned, as did the person who the ticket was reassigned to.
Can anyone offer any suggestions?
Thanks.
Matt

Unfortunately no. But I think I found a pattern in regards to this: it seems the current assigned to user is always the one listed the last.
I guess this is because the stored procedure behind the AssignedToUserDim doesn't filter if the relationship is still active. This is quite easy to "reproduce" via PowerShell.
Lets say you have an IR with ID IR1234 which has been re-assigned multiple times.
If you run this small query now in PowerShell you'll see that all the AssignedToUser relationships still exists, but only one of them has the property "IsDeleted" set to False.
Import-Module SMlets
$IRO = Get-SCSMObject -Class (Get-SCSMClass System.WorkItem.Incident$) -Filter "Id -eq IR1234"
Get-SCSMRelationshipObject -BySource $IRO | where {$_.RelationshipID -eq "15e577a3-6bf9-6713-4eac-ba5a5b7c4722"}
So, in the DB those AssignedToUser relationships (actually it applies to all relationships) won't be "overwritten" or the old one deleted as soon as you re-assign an incident for example. Instead, new relationshipobjects will be generated and the old ones
changes the "IsDeleted" attribute to True.
Perhaps it would be possible to create a new Dim for the Data Warehouse, re-use the stored procedure for the AssignedToUserDim and modify it slightly to filter only for the active AssignedToUser relationship. Then you could use your newly created dim to
display the current Assigned To User. I haven't tested this though, probably it's more complex than I assume :)
Cheers
Alex

I just bought an Ipod nano 5th gen and when i plug it in to my computer it notices it but it wont show up on my itunes i would like to know how to get to do so?

I have recently bought an ipond nano 5th generation. When i plug it in to my computer it shows up but it wont show up on my itunes. I would like to know how to make it show up on my itunes?

I am assuming you are using a Windows computer - iPod appears in Windows but not in iTunes

USMM report showing some Background job, which not in SAP

Sir,
I took USMM report from SAP PRD system for audit purpose. Everything is fine , expect some background job. There showing some background job finish on 01.04.2013. But I don't find any background job in SM37 which showing finish in USMM report. Please suggest what to do. Following are the background Job..
0000 Measurement Extensions Finished on 01.04.2013 at 12:55:30
0001 ABAP Workbench Finished on 01.04.2013 at 12:55:44
0002 Mobile Engine Finished on 01.04.2013 at 12:55:24
0009 Activity Checks Finished on 01.04.2013 at 12:56:55
0100 mySAP Human Resources Finished on 01.04.2013 at 12:55:26
0101 SAP HR e-recruitment Finished on 01.04.2013 at 12:55:24
0200 mySAP Banking Finished on 01.04.2013 at 12:55:25
0250 Financial Services Loan Management Finished on 01.04.2013 at 12:55:25
0300 mySAP Healthcare Finished on 01.04.2013 at 12:55:25
0400 mySAP Utilities Finished on 01.04.2013 at 12:55:26
0500 mySAP Telecommunications Finished on 01.04.2013 at 12:55:26
0600 mySAP Insurance Finished on 01.04.2013 at 12:55:26
0700 mySAP Public Sector Finished on 01.04.2013 at 12:55:26
0730 mySAP Public Sector Campus Finished on 01.04.2013 at 12:55:26
0800 mySAP Oil & Gas Finished on 01.04.2013 at 12:55:26
0900 mySAP Engineering & Construction Finished on 01.04.2013 at 12:55:27
1000 mySAP Aerospace & Defense Finished on 01.04.2013 at 12:55:28
1100 mySAP Automotive Finished on 01.04.2013 at 12:55:28
1201 SAP Financial Supply Chain Management Finished on 01.04.2013 at 12:55:26
1215 SAP FSCM Credit Management Finished on 01.04.2013 at 12:55:27
1500 mySAP Retail Finished on 01.04.2013 at 12:55:26
1550 BI Accelerator Finished on 01.04.2013 at 12:55:27
2100 SAP Records Management Finished on 01.04.2013 at 12:55:28
2200 ICM Incentive and Commissions
Management
Finished on 01.04.2013 at 12:55:27
2320 SAP Exchange Infrastructure Finished on 01.04.2013 at 12:55:29
2600 SAP Exchange Infrastructure Adapter Finished on 01.04.2013 at 12:55:29
6000 mySAP Financials Real Estate Finished on 01.04.2013 at 12:55:28
7100 mySAP Financials Corporate Finance
Mgmt
Finished on 01.04.2013 at 12:55:28
7500 Third-Party CAD Integration Finished on 01.04.2013 at 12:55:29
7550 SAP Learning Solution Finished on 01.04.2013 at 12:55:30
8020 Recipe Management Finished on 01.04.2013 at 12:55:29
8030 Catch Weight Management Finished on 01.04.2013 at 12:55:28
8040 RBD Tool Finished on 01.04.2013 at 12:55:29
8050 Bex Broadcaster Finished on 01.04.2013 at 12:55:28
Thanks & Regards,
Nabin Chatterjee

Hi,
You will get the list of background jobs in SM37.
It seems that these jobs are not being scheduled by your user ID.
In username field use * and check on the desired job statuses and use the date from and to on which you want to see the jobs.
Screen shot is also attached for your reference.
Regards,
Siddharth Khandelwal

Activity type origin text doesn't have been showed on Cost analysis report

I have defined three acitivities TMAQ, TMO, CIF. But the origin text column of these acitivities is not showing in cost Analysis report(althoug the origin is showed), i.e. when we go to an order & navigate to "Cost Analysis". TCODE:CO02 (Production order)
Anyone knows how to show the origin text ?
Thanks a lot for your comments.
Vero

Hi Veronica
I think maybe it´s missing the description in language you are running the report.
Check transaction KL03 to see if the activity type has the description in the language you are logged.
If not go to KL02 and update the description and try to run it again.
Regards
Fred

SWIM Jobs show failed but all images are in flash

I performed a software distribution on two different 3750 switch stacks using LMS 4.2.3 over a WAN link.
The Job Report shows this:
Copying c3750-ipbaselmk9-tar.122-55.SE4.tar from Software Repository to tftp-specific directory.
Copied successfully to C:/CSCOpx/tftpboot/rep_sw_3381422663941666305
Loading image file to flash device : rep_sw_3381422663941666305 --> flash1:c3750-ipbaselmk9-tar.122-55.SE4.tar using TFTP
Error loading image to Flash. See C:\CSCOpx\files\rme\jobs\swim\5373\3750Stack_telnet.log for the output from the device on which the image transfer failed.
Image Copy Operation Failed
Device is unlocked.
Device Upgrade Result : Failed
However, when I look at the flash on both stacks, the IOS image with the correct filesize, folders, etc. all looks right. The show boot shows it will boot to the correct image. The telnet.log file shows all the files being copied and just ends after the last file (the .bin image).
Does anyone know why this might report as failed even though the files are in flash?
I have not yet reloaded either switch as they are in production.
Thanks.

OK I reloaded one of the stacks and it came up fine.
Could this error be due to the fact that the upgrade was done over a WAN link and I did not put exec-timeout 0 0 on the line vty?

A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?

Question repeated: A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?
I want to restore from my june 2012 backup because it contains pictures that i lost when my phone broke in september. if anyone could help that would be awesome. thanks

Did you tap "Show older backups" on the Choose Backup screen (see image below)?

Job Activity shows Succeeded but Backup Report show nothing

Similar Messages

Maybe you are looking for