JOB_OUTPUT_INFO not returned

hi all,
i have made a smart form and want it to mail in pdf i am getting mail but with out any data
on deburg i find that smart form does not return data in JOB_OUTPUT_INFO . any missing parameters that i am missing.
and i am passing this smrt form in a loop of n customers so that i can get 1 spool for customer and mail for each customer.
any possible solution..

Similar Messages

HT3702 I contacted a vendor about an app and they have not returned my email. I want to cancel the purchase. What should I do?

contacted a vendor about an app and they have not returned my email. I want to cancel the purchase. What should I do?

You probably cannot get a refund, since the terms of sale for the iTunes Store state that all sales are final. You can contact the iTunes Store, explain the reason for your request, and ask, though:
http://www.apple.com/support/itunes/contact.html
It's possible they'll make an exception for you, particularly if the app is defective in some way. If you just don't like or no longer need the app, a refund is unlikely.
Good luck.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

I'm having all sorts of connection issues on a iPhone i brought in the uk 6 months ago. am i able to use a genius bar abroad as I'm not returning to the uk?

i brought a iphone 5 back in feb/march and since then its slowley getting worse and worse, my wifi hardly pickes up any signals and when it does they drop out all the time. my girlfriends iphone4 picks up and has no trouble holding onto the wifi, whilst sitting at the same table mine shows no signals. Im not returning to the uk any time soon so i want to know if its possible to visit an apple store for replacement abroad? im only 6 months into my apple care so i wouldnt think this should pose an issue. any help would be fantastic
many thanks

they will not repair the device in the us you must send it back to the country of purchase or set up repair through them the uk apple car number is as follows (44) 0844 209 0611*** you should be able to set up a mail repair through them

T-SQL: SET Statement Using a Case Statement is not returning a value

SQL VER: 2008
Please see the attached screenshot from SSMS. The Set statement below is not returned a value or may be returning a zero value. The AllocPercent field is set to zero in code preceeding this Update Statement:
AllocPercent
=
CASE
WHEN AllocBase
IS
NULL
OR AllocBase
= 0
THEN 0
ELSE PM_Input/AllocBase
END
As you can see by the screen shot from the Select Statement that is displaying the results after the Update Statement is completed, the value of AllocPercent is = 0 even though all the values necessary for it to compute a value > 0 are present in the
table. Incidentally, the values in both the AllocBase and PM_Input fields are the same before the Update Statement is ran, as shown in the Select ran after the Update Statement.
I have ran this type of code several times with never a problem. This seems really simple, but I just can't seem to get it to compute.
Any help would be greatly appreciated.
Regards,
bob sutor
Bob Sutor

Yep--This statement is running in a Stored Procedure and inside its own block statement.
I did get a response that suggested I change the SET statement as follows, that worked:
AllocPercent
= CASE WHEN AllocBase IS NULL OR AllocBase = 0 THEN 0.00 ELSE cast(PM_Input*1.0/AllocBase*1.0
as decimal(6,2)) END
Your response did get me thinking which was great! I appreciate your help.
Regards,
...bob sutor
Bob Sutor

ExecuteWithParams is not returning the rows from cache

Hi,
We have two VO's based on same entity ,whenever new row is inserted in one VO and we do executeWithParams on another VO ,It is not returning the rows which are uncommitted.
I replaced the executeWithParams with a custom method in AM in which I am executing the query after applying the view criteria and setting query mode.Its returning rows which are uncommitted.
Jdev Version which I am using is 11.1.1.7.0
ExecuteWithParams used to work with uncommitted data in 11.1.1.6.0 .
Do we need to raise a bug on framework or Am I missing something?
Edited by: sharavnkumar_malla on Oct 18, 2012 1:02 AM

Still the same answer, even after you updated the question. We (the public) don't have 11.1.1.7, know nothing about 11.1.1.7, and cannot help you with 11.1.1.7. Questions about internal builds belong on internal forums.

Function Module - E_T_DATA does not return data

Hi
I am trying to create a fuction module Generic extraction, the code belwo dosen't return any data.
when i debug YBW_MAT_STAT does have but after E_T_DATA = YBW_MAT_STAT it dose not return any data
can you help?
Ramesh
FUNCTION YBW_FM_ACTIVE_MATERIAL.
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE YBW_MAT_STAT OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
Example: DataSource for table SFLIGHT
TABLES: YBW_MAT_STAT.
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
   DATA : YBW_MAT_STAT type YBW_MAT_STAT occurs 0 with header line.
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
counter
          S_COUNTER_DATAPAKID LIKE SY-TABIX,
cursor
          S_CURSOR TYPE CURSOR.
Select ranges
Comment copy code
RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
         L_R_CONNID FOR SFLIGHT-CONNID.
DATA: begin of t_marc occurs 0,
ZMATNR type MATNR,
ZWERKS type WERKS,
end of t_marc.
DATA: begin of t_ytmd_mat_ref occurs 0,
ZMATNR type MATNR,
ZYNA_MATNR_ST type YNA_MATNR_ST,
ZYEAME_MATNR_ST type YEAME_MATNR_ST,
ZYFIN_MATNR_ST type YFIN_MATNR_ST,
end of t_ytmd_mat_ref.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check DataSource validity
    CASE I_DSOURCE.
      WHEN 'ZAINV_MAT_STATUS'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
        LOG_WRITE 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  I_DSOURCE   "message variable 1
                  ' '.                 "message variable 2
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDCASE.
    APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
    S_S_IF-REQUNR    = I_REQUNR.
    S_S_IF-DSOURCE = I_DSOURCE.
    S_S_IF-MAXSIZE   = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
    APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
      SELECT MATNR WERKS FROM MARC into table t_marc where MATNR BETWEEN '4233940M1' and '4233950M1'.
      loop at t_marc.
        SELECT MATNR YNA_MATNR_ST YEAME_MATNR_ST FROM YTMD_MAT_REF into table t_ytmd_mat_ref where MATNR = t_marc-zmatnr.
          loop at t_ytmd_mat_ref.
            if t_marc-zwerks = 'GB71' AND t_ytmd_mat_ref-ZYEAME_MATNR_ST = 'A'.
              read table t_ytmd_mat_ref with key zmatnr = t_marc-zmatnr.
              YBW_MAT_STAT-matnr = t_marc-zmatnr.
              YBW_MAT_STAT-plant = t_marc-zwerks.
            append YBW_MAT_STAT.
            clear YBW_MAT_STAT.
            endif.
           endloop.
      endloop.
    ENDIF.                             "First data package ?
     clear E_T_DATA.
     refresh E_T_DATA.
     E_T_DATA = YBW_MAT_STAT.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.              "Initialization mode or data extraction ?
ENDFUNCTION.

Hi
I have a question,
With the above code i have all my records (450000+) in a single data package.
how do i break this in multiple data packages
regards
Ramesh

Read from sql task and send to data flow task - [OLE DB Source [1]] Error: A rowset based on the SQL command was not returned by the OLE DB provider.

I have created a execut sql task -
In that, i have a created a 'empidvar' variable of string type and put sqlstatement = 'select distinct empid from emp'
Resultset=resultname=0 and variablename=empidvar
I have added data flow task of ole db type and I put this sql statement under sql command - exec emp_sp @empidvar=?
I am getting an error.
[OLE DB Source [1]] Error: A rowset based on the SQL command was not returned by the OLE DB provider.
[SSIS.Pipeline] Error: component "OLE DB Source" (1) failed the pre-execute phase and returned error code 0xC02092B4.

shouldnt setting be Result
Set=Full Resultset as your query returns a resultset? also i think variable to be mapped should be of object type.
Then for data flow task also you need to put it inside a ForEachLoop based on ADO.NET recordset and map your earlier variable inside it so as to iterate for every value the sql task returns.
Also if using SP in oledb source make sure you read this
http://consultingblogs.emc.com/jamiethomson/archive/2006/12/20/SSIS_3A00_-Using-stored-procedures-inside-an-OLE-DB-Source-component.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

A rowset based on the SQL command was not returned by the OLE DB provider.

Hi
I am calling a stored procedure using ssis.
i am creating a work table--temp in the procedure and using that to join and select columns from other tables.
i am gettig the error
[Positions [22612]] Error: A rowset based on the SQL command was not returned by the OLE DB provider.
please help

SET NOCOUNT ON
in the stored procedure and try again.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

The LOV modal window could not return value to the base page

when practicing the "create1" task in tutorial, met an issue.
when create an employee, manageName is a messageLovInput and managerID is a messageTextInput.
The issue is the LOV modal window could not return value to the mangerName, but can return to managerID .
If I remove the data boud porperties of the managerName (the bc4j porperties of view name-EmpFullVO and view attribute-MgrName), the lov works fine.
What is the reason?

James I would suggest to read the LOV topic in OAF developers' guide. Lov mappings are responsible for bringing pop up values to base page in LOV.
--Mukul

Error: Expression must not return a multiline value

Hi all,
I am doing a file to file scenario. My input file has more than one record. I have to validate for each of these records and send back the erroneous records in a file to the source folder.
I am using BPM for this. In my BPM, i have some multiline container elements. When i try to activate my BPM, i am getting an error saying: <b>Expression must not return a multiline value.</b>
Can anybody tell me why this error is coming? Also i want to know what type of mapping i have to do to split my source file.
Regards,
Divija.

"Can anybody tell me why this error is coming? Also i want to know what type of mapping i have to do to split my source file."
Go through the following blogs which give step-bystep approach for split mapping using BPM:-
1. /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
2. /people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
Also, you might want to look at this, where a BPM is not required..i think you can avoid a BPM altogether if you have very little validation..
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Regards,
Sushumna

WebI does not return failed when scheduling a report which only holds parti

WebI does not return failed when scheduling a report which only holds partial results.
We have scheduled reports which take some time to run. When they are scheduled they sometimes show successful even though the report only holds partial results. The only indication is when you open the report as webi report you see the warning that it holds partial results.
When running the report manually, it works file.
The issue is not in the no of rows in the universe settings because we this unselected. The issue is that it times out.
The reason that it times out is that a lot of resources are used for loading and processing data when the report is scheduled. When running it manually, it works because at this time the serverload is less. the time in the universe is set to 10 min.
The version we have is BOXIR2-SP4.
Ok. Issue identified.
The question is - why is the report successful when it holds partial results? If this is normal behavior, noone can really trust the scheduled reports, especially when you save it to excel and send it by mail.
Is there a solution for this except increasing the allowed query time which would not solve the issu but only allow more reports to complete?
Edited by: Karlgren Michael on Sep 17, 2009 1:22 PM

Hi ,
Currently this problem exists in XI R2. This feature will be part of thenext Service Pack i.e XI R2 SP6.
This CER will be delivered from IDC Webi and BIP Platform as part of Jupiter Sp6.
Problem Statement:
Scheduled WebI Reports which are partially refreshed are distributed to the destinations for Users to View and make decisions. These users arenu2019t usually aware that these reports have u201CPARTIAL RESULTSu201D
Recomended Solution:
Allow the Schedule Creator / Modifier to set a parameter to stop the distribution of the u201CPARTIALLY REFRESHEDu201D WebI report.
Thanks
Salini

My PC does not return to the source document I print from

I had a setting control for
this in XP but can't find the page I got it from.<o:p></o:p>
<o:p> </o:p>
In ANY application or browser
this happens. I print from a specific Excel workbook, by example, when I
have a number of them open. The system does not return to the workbook I
printed from. This is maddening and causes all kinds of issues.
Searching the web for this now produces nothing and I know I can't be the
only person who experiences this.<o:p></o:p>
<o:p> </o:p>
This is a Windows 7 platform
in a networked business environment. I'm running the Classic Menu add-in
from Addintools because I can't stand the ribbon and have never liked it.
In Windows 7, I'm running a couple of other add-ins that restore the XP
use of the task bar properly so one can work efficiently.<o:p></o:p>
<o:p> </o:p>
None of the add-ins are what
is causing this issue because I'd run the same Classic Menu add-in on the XP
box and it had the same issue until I found the work-around that I can't
remember now.<o:p></o:p>
<o:p> </o:p>
Has anyone else experienced
this issue?<o:p></o:p>
<o:p> </o:p>
Jeff Lynch<o:p></o:p>

Hi,
"I print from a specific Excel workbook, by example, when I
have a number of them open. The system does not return to the workbook I
printed from."
If I'm not misunderstanding, do you mean that the workbook is automatically closed after you print from that workbook, right?
As I know, if we use the default ribbon in Excel, no matter in Windows XP or Windows 7, the opened workbook should be stay opened after you print from that Excel workbook.
So the question is that: what is the version of office? What is the Classic Menu add-in you're running now? Did you manually download and install it to your system? Could you please share a picture with us about the add-ins you're using?
Yolanda Zhu
TechNet Community Support

Web Service Proxy not returning Response in 11g

Hi,
I am facing a difference in the creation of Web Service Proxy in 11g when compared to 10g. I have exposure of creating a Web Service Proxy in 10g and I do observe that the folder name 'runtime' gets generated automatically along with the proxy at the time of creation.
But in 11g, the nature & behavior of Web Service Proxy creation has changed a lot according to my observation. I am facing an issue where the response object is not returning the expected results as per the functionality.
In 10g, we have used a Stub class (automatically created under 'runtime' folder) and we are able to put some logs to see the request and response object in the form of 'xml'. But in 11g, I am facing difficulty in getting the same logged to see the response from OPA.
Please share your thoughts which would definitely help me in resolving this issue.
With Regards,
Thiyagarajan V

Hi,
I have also tried using 'Web Service Data Control' as an alternate method to overcome the above mentioned issue. But I have ended up the error "DCA-29000: Unexpected exception caught: java.lang.NullPointerException,msg=null" and failed to create a data control.
The JDeveloper version which I am using is 11.1.1.5.0. I also came to know that there is a patch (9790388) which has resolved this bug in JDeveloper. I also applied the same patch in my Oracle Home using OPatch utility.
But unfortunatley, the version suitable for this patch is 11.1.1.4.0 and I suspected that could be one of the reason that the problem has not got resolved yet.
Please suggest the patch or any solution which can also help me in resolving this issue. I really appreciate your time and effort in sharing your thoughts for the problems which I have mentioned over here.
Thank you !!!
With Regards,
Thiyagarajan V

Good morning a few weeks ago I send the request for the replacement program of my ipod nano 1st generation and they sent me the shipping box but I did not get the label to go back, and I can not return it , i need to you sent me again the box for retu

Good morning a few weeks ago I send the request for the replacement program of my ipod nano 1st generation and they sent me the shipping box but I did not get the label to go back, and I can not return it , i need to you sent me again the box for return the ipod

Best thing would be to call Apple up again, and let them what has happened and they'll help you!

FM F4IF_INT_TABLE_VALUE_REQUEST do not return value in RETURN_TAB

Hi all,
I used the FM F4IF_INT_TABLE_VALUE_REQUEST to return the objid and stext and it is showing the search help in the selection screen, however, after i choose a value from the search help, the FM does not return me the value that i have choosen. The following is the code that I had written.
DATA: lt_retval TYPE STANDARD TABLE OF ddshretval,
        lwa_retval TYPE ddshretval.
DATA: lt_field TYPE STANDARD TABLE OF dfies,
        lwa_field TYPE dfies.
CONSTANTS: lc_retfield       TYPE dfies-fieldname VALUE 'STEXT',
                       lc_value_org      TYPE c VALUE 'S'.
lwa_field-fieldname = 'F0001'.
lwa_field-langu     = sy-langu.
lwa_field-position = '1'.
lwa_field-offset    = '0'.
lwa_field-domname   = 'HROBJID'.
lwa_field-rollname = 'HROBJID'.
lwa_field-leng      = '8'.
lwa_field-intlen    = '16'.
lwa_field-outputlen = '8'.
lwa_field-datatype = 'NUMC'.
lwa_field-inttype   = 'N'.
lwa_field-precfield = 'HROBJID'.
lwa_field-headlen   = '8'.
lwa_field-scrlen1   = '10'.
lwa_field-scrlen2   = '15'.
lwa_field-scrlen3   = '20'.
lwa_field-fieldtext = 'Posting ID'.
lwa_field-reptext   = 'Posting ID'.
lwa_field-scrtext_s = 'PostingID'.
lwa_field-scrtext_m = 'ID'.
lwa_field-scrtext_l = 'Posting ID'.
APPEND lwa_field TO lt_field.
CLEAR lwa_values.
lwa_field-fieldname = 'F0002'.
lwa_field-langu     = sy-langu.
lwa_field-position = '2'.
lwa_field-offset    = '16'.
lwa_field-domname   = 'TEXT40'.
lwa_field-rollname = 'STEXT'.
lwa_field-leng      = '40'.
lwa_field-intlen    = '80'.
lwa_field-outputlen = '40'.
lwa_field-datatype = 'CHAR'.
lwa_field-inttype   = 'C'.
lwa_field-precfield = 'STEXT'.
lwa_field-headlen   = '40'.
lwa_field-scrlen1   = '10'.
lwa_field-scrlen2   = '15'.
lwa_field-scrlen3   = '20'.
lwa_field-fieldtext = 'Posting Text'.
lwa_field-reptext   = 'Posting Text'.
lwa_field-scrtext_s = 'PostingTxt'.
lwa_field-scrtext_m = 'Text'.
lwa_field-scrtext_l = 'Posting Text'.
lwa_field-lowercase = 'X'.
APPEND lwa_field TO lt_field.
CLEAR lwa_values.
IF lt_values IS NOT INITIAL.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
        retfield        = lc_retfield
*        dynpprog        = sy-repid
*        dynpnr          = sy-dynnr
*        dynprofield     = lc_fieldn
        value_org       = lc_value_org
      TABLES
        value_tab       = lt_values
        field_tab       = lt_field
        return_tab      = lt_retval
      EXCEPTIONS
        parameter_error = 1
        no_values_found = 2
        OTHERS          = 3.
    IF sy-subrc EQ 0.
      CLEAR lwa_retval.
      READ TABLE lt_retval INTO lwa_retval INDEX 1.
      IF sy-subrc EQ 0.
        MOVE lwa_retval-fieldval TO s_post-low.
        CLEAR lwa_retval.
      ENDIF.
    ELSE.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDIF.
Please assist, thanks so much.
Edited by: yf wee on Oct 5, 2009 8:11 AM

Hi,
Refer this demo code:-
PARAMETERS : p_belnr TYPE belnr,
             p_bukrs TYPE bukrs.
DATA : BEGIN OF itab OCCURS 0,
         belnr TYPE belnr,
       END OF itab.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_belnr.
PERFORM f4_belnr_help USING p_belnr.
*&      Form f4_belnr_help
*       text
*      -->P_BELNR text
FORM f4_belnr_help USING p_belnr.
SELECT belnr from <db_table> INTO TABLE itab.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield               = 'BELNR' "internal table field
      dynpprog               = 'Z_F4' "program name
      dynpnr                 = '1000' "screen number
      dynprofield            = 'P_BELNR' "screen field name
      value_org              = 'S'
    TABLES
      value_tab              = itab "internal table
    EXCEPTIONS
      PARAMETER_ERROR        = 1
      NO_VALUES_FOUND        = 2
      OTHERS                 = 3.
IF sy-subrc 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " f4_belnr_help
Hope this helps you.
Regards,
Tarun

JOB_OUTPUT_INFO not returned

Similar Messages

Maybe you are looking for