JSPs always recompiling even with pageCheckSeconds -1
I have sent the jsp-descriptor pageCheckSeconds to -1
indicating that I don't want my jsps to ever be recompiled
(I include the generated class files in the war and so they
should never need recompilation). I see from the weblogic.log
that this setting has taken effect, however, the jsps are still
being recompiled when referenced.
Somehow the installed petstore.ear file manages to avoid
recompilation, but I can't seem to make this work for my ear files;
the jsps are always recompiled.
Is there something special done in the distributed petstore.ear?
If I take the petstore.war and replace any one of its class files
with a newly recompiled one and put this back in the original
petstore.ear, then restarting the server and referencing
the page will again recompile the page. Is there any way
to avoid this recompilation? Is the isStale method not working correctly?
Does setting pageCheckSeconds -1 not work?
M. Borkan
[email protected]
Hi again. That is a good idea. Check if router can grab an ip from your modem since wireless local connection through the router is working. If it can grab an ip and works fine on wireless, then you might have a problem with the ethernet ports. You might want to try assigning an ip address on the wired connection and see if ip of router is pingable. If really not working at all, possibility that router is not working properly anymore.
Similar Messages
-
In WL 6.0, does JSP always recompile?
If I deploy a .ear file which contains a .war file with JSP's in it, are all the
JSP's going to be set to recompile? Or will the JSP's that haven't changed since
the last .ear file was deployed not recompile? It seems to me that the first behavior
is happening, because every time I deploy a new .ear file, every JSP is recompiling.
Thanks,
- E
The language in the documentation should be clarified; IMO, it is too strongly worded. What's going on is this: java.rmi describes the ideal API, but because of implementation details in the JDK, it becomes necessary for there to be a weblogic.rmi package that mirrors that API. Such methods as, for
example, UnicastRemoteObject.exportObject(..) do not offer an opportunity for alternate service provider to provide support for RMI; consequently, there must be a weblogic.rmi.server.UnicastRemoteObject.
What the documentation strives to do is encourage the use of those parts of the standard API that can be leveraged, thereby making your application more portable. Also, at this stage, we have the best intentions of deprecating the weblogic.rmi API, but there is no hope of doing that until JavaSoft
provides for an appropriate Service Provider Interface for RMI. Thus, and I'm sorry for the resulting confusion, the interfaces and the examples remain.
If you would like JavaSoft to provide an SPI for RMI, I would encourage anyone to communicate this to the contacts at JavaSoft, namely [email protected] and [email protected]
Peter Mularien wrote:
Hello -
I note in the release notes the following, in the RMI changes section:
Use java.rmi.Remote to tag interfaces as remote. Do not use weblogic.rmi.Remote.
Use java.rmi.*Exception. Do not use the weblogic.rmi counterparts.
Use JNDI instead of *.rmi.Naming.
The examples using RMI still use the weblogic.rmi.* classes/interfaces. The Javadoc does not note that these classes/interfaces should not be used and/or are deprecated. Is this true/accurate?
Thanks -
Peter Mularien
Deploy Solutions, Inc. -
HP Pavilion dv4t-1300 fan is always on even with low CPU
I have a HP Pavilion dv4t-1300 Entertainment PC with Windows 7. Even with a low CPU (around 20%), my laptop fan is always on, and the noise is annoying. Why is it always on? How do I turn it off (I have a separate laptop cooler)?
There's a free programme called speedfan to moniter temps, my fan runs all the time its normal it runs at 30% unless cpu and things get to high temps, you can turn off the fan in the bios but i wouldn't recommend it.
-
Tried to watch, movie, "this means war, but couldn't get any sound working , always came up with error, also we tried to play things from you tube and iview but the icon for the apple tv wasn't there, we switched and restarted the Internet, wireless(airport ) and even restarted our iPads , but could play anything thru apple tv, even on my computer (Mac book air) the icon was there but only allowing to p,au on the MacBook air,there was no option fir apple tv, I also restarted the apple tv, still nothing working
I'll try agin tomorrow , the 22 July and see if anything is working
Cheers lilianI am experiencing a similar problem in Windows 7 64bit. Since my laptop has a 128gb SSD, I have loaded my iTunes library on to an external drive. I can sync my iPhones and iPads from this library, and the songs play fine from those devices. However, when I select a song from my library, and click the play button, nothing happens. iTunes does nothing. I have also tried right-clicking mp3s in my library and selecting "Play", with no results. I do not receive an error message of any kind.
I have also noticed that some of my mp3's within iTunes denote the Time as 00:00. The same mp3's will play and register properly using other mp3 players on my computer, and they also play normally on my iPhones and iPads.
I am running Windows 7 x64 on a Lenovo T530, in iTunes 11.1.3. Everything else in iTunes appears to function normally. I can listen to internet radio stations without an issue, through iTunes, and they play as they should. I have tried three different external drives, with different drive formats, and they all have the same issue. If I copy my iTunes library back to my internal drive, iTunes will play my mp3s.
I did not have this issue with iTunes 10, so I am assuming it is something that has occured within the last few updates.
Has anyone found a fix for this? Unfortunately, I am forced to use iTunes 11 because of my iOS devices, otherwise I would revert to iTunes 10. -
my location services is already on as well as with my facebook apps, but still i am unable to check in. what's wrong? even with my maps, it always say location unavailable. help please.
- The iPod uses the location of a nerby or connected router to determine it location based on a database of routers and their location. It appears that the routers near y are not in Appl'es database. As of yet, nobody here seems to know how to get routers added to the database.
- If you go to Strtbucks. McDonalds or another networks does the location show in the Maps app? -
I am using version 15.0.1. Since I updated to this version, the Back arrow does NOT always work particularly with Amazon and eBay. This is particularly evident when I go from a list the result of a search to an item on the lis. I cannot get back to the list even using the On-page Back arrow. I usually have to repeat the search to get back to the list again.
Hi MorrellMurphy
probably problem with [http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox Locked or damaged places.sqlite] file
thank you -
Even with nothing connected to my Mac Pro, I get a USB error message
Even with nothing connected, I get this error message:
Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.
I have restarted a few times and restarted in safe mode, and reset the PRAM and it is still there.
Any ideas?Even with the mouse and keyboard unplugged, I got the same error message. It always gives me 5 warning messages in 5 separate dialog boxes. The 2 USB ports on the front of the machine are disabled, and the 3 in the back are ok.
Profiler recognizes the "Hub in Apple Pro Keyboard" that lists the keyboard and the USB laser mouse (Logitec).
I'll give the SMC reset a try, but I have read in another thread where it didn't work for the guy with the problem, and his final solution was a complete re-install of the system software. I'm thinking maybe an upgrade to Lion 10.7 might fix it without having to rebuild my whole computer. I'm using 10.6.8.
-I'm still perplexed. -
Ever since installation of OSX Lion, I've been having freeze-up problems on my early 2011 MacBook Pro. Increased the RAM from 4GB to 8GB. Amazingly, when I have Mail and Chrome open, almost all of the RAM is consumed. Even with all programs closed, I only have about 3 GB of free space. Any ideas as to what the problem is?
Mail under Lion (your profile says 10.5) is always busy and doesn't like large email database I hear.
Chrome and Safari don't clear their history and cache, lack quota on how many days and disk use, so clear those out. This is where I do use CCleaner on Mac as well as Wndows.
I keep reading from 10.6 on that even closing (quit) does not release memory and threads galour that there are memory leaks that you have to repair permissions, even restart, and poor memory management for many people's systems (often laptops).
Free RAM is wasted RAM though. Even 3GB seems excessive. This is not OS 9 or 1999.
but I found that 4-core 4GB RAM was fine except for handling large photo libraries. -
9300 turns off even with full battery
Hi, I hope somebody can help me... Long story here...
I bought my 9300 in Istanbul, where I live. I have a Vodafone Turkey simcard and Vodafone Spain simcard. I swithch simcards when I travel, works beautifully, even with email and whatsapp.
Last year I had an issue whith battery draining in less than 2 hours every morning. After reinstalling software and getting rid of all apps (incl whatsapp) it eventually came back to life and the battery started lasting for 2 days again. I must say I did the upgrade of OS while in Spain (I don't know if it makes a difference...)
A couple of weeks ago (now I am in Istanbul), same thing happened. It is just that this time the battery doesn't drain, the phone just shuts itself off, normally in the middle of a conversation or trying to send a whatsapp, and with full battery.
The first few times, taking the battery off and sim and putting it back in did the trick. After a couple of times, however, it is not working anymore. This it what happens:
BB turns off completely.
If I try to turn on, it does not even try.
If I remove battery and simcard, it restarts and is ok in all processes but when it is looking for network signal, it turns off again.
I remove battery and simcard second time, and it does not go through the software verification, it turns off again.
After this, the only way to bring it back to life is to plug it in, and then it restarts and with full battery!! I unplug and I can use email for the next 3-4 hours, until some hours later, same problem all again. I carry my charger everywhere!
I have the latest OS available, and I have got rid of whatsapp, which last year I think it was the beginning of the solving of the problem (whatsapp releases new versions constantly, I think upgrading it did the trick. Or was it just chance?), but it is still not helping so far.
My husband has the same model, never a problem. We exchanged the batteries, no luck either.
Any ideas?Mucolly wrote:
Help guyz my phone turns off itself with a full battery of which I deceded to buy new original battery but problem persist and when I charge its working when I unplug my phone goes white on the screen which is switching itself off help guyz.
Hi and Welcome to the Community!
There are many things already posted in this thread...have you yet read and attempted any of them?
You also may want to attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But, if the behavior continues, you may need to consider more drastic actions -- e.g., WIPE, OS Reload, BBSAK Wipe/Reload, "bare bones" OS loading, etc.
Do also keep in mind that, if the problem is at a hardware level, then no amount of self-diagnosis nor internet-distance recommendations will be of any use...only in-hand evaluation by a qualified hardware technician can properly diagnose a hardware problem.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Hi,
I am experiencing Popup ads even with popups blocked in preferences and always on initial opening of FF Browser when clicking anywhere on any website?
Is there a fix, a plugin to disable or is this a Firefox default feature or is this related to something else?
I use FF 11.0 on a Mac OS X 10.6.8
Can you help?
Thank you for your support and understanding.
Kind Regards
- Leslie Banks -Hi Swarnava,
Thanks for the reply and add block link. I have used this before but this is a completely different problem that I am experiencing.
I have a suspicion that I have something on the computer that has control.
The advert popups are always for Mac Cleaner.
Any other suggestions?
Thanks for your help and support.
Best Regards
- Leslie Banks -
http://www.gotrendme.com -
I recently noticed that the light on the magnetic connection to my charger for my laptop is always on even when it isn't connected to the computer. I keep it plugged in. I don't remember it being like that in the past so I'm wondering if something is wrong.
Last sentence in the paper suggested by DALE:
Additional Information
Whether your product is in or out of warranty, you can take your adapter to an Apple Authorized Service Provider or Apple Retail Store for evaluation and replacement if necessary. Pending the results of the evaluation, you may or may not be eligible for a replacement adapter free of charge. Signs of accidental damage would negate any coverage. Be sure to bring in the computer used with the adapter; it is required to process potential adapter replacements. -
Airport Express 2nd WAN Port light always on, even when nothing is connected.
My Airport Express 2nd WAN Port light always on, even when nothing is connected.
Is this normal? The Airport utility also said that I didn't connect anything to the port - when there is a lan cable connected from the main Airport Extreme.
The computer can connect to the WiFi from the Airport Express properly, but with blinking yellow and no internet connection, also it cannot obtain the ip address.
After setting the Airport Express to the Bridge mode, the computer cannot access to the Airport Express anymore, with "Connection Time Out" error.
The Airport Express was 3 days old, and was working properly until today. There is also one blackout today because of the storm.
Had reset the Airport several times, didn't solve the problem.Hi again. That is a good idea. Check if router can grab an ip from your modem since wireless local connection through the router is working. If it can grab an ip and works fine on wireless, then you might have a problem with the ethernet ports. You might want to try assigning an ip address on the wired connection and see if ip of router is pingable. If really not working at all, possibility that router is not working properly anymore.
-
RV320 Always uses connection with static IP
Hello there all,
I have a bit of a problem hoping someone could help me.
The situation is this: We have on WAN1: auto assigned DHCP Cable internet with 150/15 down/up.
on WAN2 (static IP) we have Fiber 100/100 down/up.
Now the problem is that even though i have set load balance mode to auto, it always goes out with WAN2 (I can see that by going to any what is my ip website).
I tried switching both connections but then still after about 20 seconds the RV320 starts using the Fiber.
Then i thought of using Priority through BW management but when you enable anything there, throughput to WAN drops from full to like 50-60mbps which is ofcourse not what i want. And then I thought of setting the router to Smart link backup: WAN1, but then it disconnects WAN2 untill WAN1 goes down which is also not what i want.
I basically want WAN1 to be used mostly and for example for the upload use WAN2, what am i doing wrong here or is this just bugged??2014-02-27, 20:27:27
User Log
edit_sys_dualwan2.htm is changed.
2014-02-27, 20:27:42
User Log
sys_dualwan2.htm is changed.
2014-02-27, 20:27:42
Network Log
WAN connection is down
2014-02-27, 20:27:42
Kernel
kernel: Set: GPIO[5] Value[HI]
2014-02-27, 20:27:49
User Log
sys_dualwan2.htm is changed.
2014-02-27, 20:27:51
Kernel
kernel: [eth0] lanip=192.168.1.1, mask=255.255.255.0
2014-02-27, 20:27:51
Kernel
kernel: ip[62.211.111.20] mask[0.0.0.0]
2014-02-27, 20:27:51
Kernel
kernel: ip[62.133.111.25] mask[0.0.0.0]
2014-02-27, 20:27:51
Network Log
WAN connection is down
2014-02-27, 20:27:51
Kernel
kernel: Set: GPIO[5] Value[HI]
2014-02-27, 20:27:56
Network Log
WAN connection is up : 62.133.111.25/255.255.255.128 gw 62.133.111.1 on eth2
2014-02-27, 20:27:56
Kernel
kernel: [eth0] lanip=192.168.1.1, mask=255.255.255.0
2014-02-27, 20:27:58
Kernel
kernel: wrong ip[0],not_list[0]
Only when i hard set it to use WAN1 only, then it works fine, but when i put it to auto balance even with Network detection off, it goes to WAN2.
I also keep seeing this every xx minutes:
2014-02-27, 20:33:34
Kernel
kernel: wrong ip[0],not_list[0] -
E90 WLAN Logo always on even turn off WLAN Scanner
Hi,
My E90 WLAN logo always on even I turn off "WLAN Scanner" since few days ago after I installed Gizmo (I deleted it already now), its 4 small boxs indicate phone is not connected (I guess). I am wondering if WiFi still on and consume battery?
is't normal? how can I turn it off like before?
Thanks
-Dingding
Moderator note: Email Address removed
Message Edited by dazz19 on 08-Jul-2008 09:01 AMI have had the same problem with my E90. What I figured out that a program that used the wlan was causing it to not turn off. In my case this was truphone.
-
WiFi - no online apps work in hotspots even with wifi symbol on
Hi. I can connect and use my home wifi with online apps but at hotspots, even with open networks, I get the wifi on symbol but nothing loads in any online app (incl. safari). Any ideas?
Thanks.1, not all hotspots are really free.
2, Most require you to accept terms and conditions (thus always try safari first).
If safari doesn't bring you to a terms and conditions page when you try to go somewhere then good chance the spot really isn't free for all.
Once you find a spot that does allow you to accept terms (or Safari just works) then apps will work with the WiFi...you just need to always check safari first.
Maybe you are looking for
-
HT202213 Can multiple Apple ID's share one computer and music?
My husband and I want to share music but have 2 separate apple ID's. Is there any way for us to share music?
-
Can i use iTunes Allowance credit to purchase icloud storage?
I'm trying to purchase more iCloud Storage for my Mom's account using my credit card, but i don't want to associate my credit card information to my mom's account permanently. She's one wherin she doesn't trust any online transactions with her credit
-
Pricing Error in Sales Order - How to Maintain...
I am newbie in SD and having issue, I have a sales order where I enter material and get "Pricing error: Mandatory condition PB00 is missing". Now I know this condition is set for manual entry if it is not found via procedure. But where do I maintain
-
Download and upload ABAP database table to presentation server and R/3
Hi experts, I want to download ABAP database table (Ztable) to presentation server and again want to upload this to another R/3 server but i dont want to use any transport request. is there any possible sollution for this. Thanks in advance
-
Portrait oriented thumbnail becomes Black Exclamation error when clicked on
After loading in pix from my new Canon G9 (12 megapixel), I can click on landscape oriented photos (from their thumbnails) and they come to full screen display as expected, however all the portrait oriented thumbnails flash up to full screen and then