Jump from query
HI Gurus,
I have to develope a query where i have to jump from BI query to ECC. In my report There are two fields one is account and another is account number. If i click on the document number i have to go to an ECC transaction diplaying data about that document and if i click on the account i have to go to another ECC transaction displaying data about account. I know that we can jump from BI query to transaction, but is it possible to jump from one query to 2 different transaction? if so how to do it?
Regards,
Raghavendra.
Hi Raghavendra,
In the RSBBS t-code, give the sendor reprot name then click on create button.
Then select transaction and sourcesystem and then the T-code you need to enter.
Then after save the setting. goto Assignment details. Click on the field for which you need to assign that transcation.
Then create another one and select transaction .. provide the details as above and in assignment provide the details.
Ex: for G/l account you can assign the FS03n T-code on r/3.
for cost center you can assign the KS03 t-code on r/3.
Hope it helps...
Regards,
Ravi Kanth
Similar Messages
-
Query on Cube jumps to Query on ODS ; Query on ODS takes Long time
Hi All,
Perormance Issue: Query on Cube jumps to Query on ODS.
Query on ODS taking long time.(JumpQuery)
Specific to ODS Query: When i have checked the Query on ODS(individually) also taking longer time
Actually ODS contains quite huge data. Indexes already maintained.
I have checked the RSRT- Execute SQL and Debug Option also. Indexes maintained Perfectly .
Order of objects in ODS indexes are matching the order of Objects in SQL stat of RSRT Trans. Inspite of that taking long time.
I have checked both the ways jumpquery aswellas individually .
My question is when the query is jumping from cube to query on ODS how to check the performance, how the query is executing in background when switching over to the second query, Moreover calculated keyfigure has been used for jumping to the target query.
How can query(ods query) time is optimized or improve performance when jumping from query on Cube ?
can any body help?
Rgds,
C.V.
Message was edited by:
C.V. PWhat i understand is that you need to optimise the Query jumping time . But this will be very less compared to the time taken by the query on the ODS.
Ideally you shouldnt be making a BEx Query on the ODS , as this takes a long time. What you can do is try executing the Bex Query on the ODS to find out as to where the issue lies. If this query is taking a long time , there is not muich that you can do here. -
GoTo - Jump to Target from Query to Web Interface
Hi Guru's,
I'm trying to make a GoTo from a web query (sender) to a BPS web interface (as receiver). That's ok for the moment ! My problem is to pass the parameters from the query for example the CompanyCode to the dropdownlist of the web interface which contain the CompanyCode ...
Someone could help me ?
Thanks in advance,
AleksiThere is an Option within RSBBS to jump from a query (3.X) to BI 7.0 web app. I tried this and it did not transfer the state to the 7.0 web app.
I dont think it will work jumping from 7.0 to BW 3.X app.
Thanks. -
Jump from bex Query to cprojects application
Dear
I'm facing following problem.
We would like to jump from a Bex Query to a Cprojects application.
In our Query the project ID is our infoobject that we want to use as key field in RSBBS but the destination is a Cproject application (Web portal) .
I've received an URL where the application is stored but it seems that the Cproject application can't be called from BEX.
Any help is appreciatedhello,
have you verified that the source system has its ITS functioning, the RFC and logical systems defined.
Make sure the source ITS name is maintained in the RSBBS_RSRR_URL or TWPURLSVR table.
The OSS note 771351 gives details about the details for the configuration.
Regards,
Dhanya. -
Problem in query jump from one sender and two receivers
Hello all,
My requirement is to jump from one query to another two queries. The sender comes from infoCube A and receivers comes from ODS B and ODS C (ODS C is a copy of ODS B). The problem is that when I execute the first jump a pop up appears with a selection date. This issue does not happen when I execute the second jump (and the selection date is needed). Target queries are identical, and I don´t know what is happening.
Any ideas?
Thanks in advance.
CarmenHi Carmen,
I think you have used the same variable for the day selection for the query on ODS C and ODS B. Hence when you fill it for the first time it does not ask you at the second instance.
Regards. -
Jump from (RRI) BEx query parsing infoobject without MD to source system
Hi!
I have a snag that I hope someone out there will be able to help me with. I have a query that cointains purchasing line items. I want to jump from a purchasing order number in the query to transaction me23n (display purchasing order) in the source system.
This works fine in the portal (don't ask me why there's a difference..) where ECC is launched as a new portal window and the data is parsed correctly. But when attemting to do the same in BEx Analyser the system pops a dialog demaning that I choose which infosource should be used for reversing the infoobject into the proper ECC table field...
Now the infoobject is 0REF_DOC_NR, and it doesn't have any masterdata or texts.. so there is no "papertrail" for the system to follow back to the source.
In RSBBS the I have selected delete for all other infoobjects and set the line for 0_ref_doc_nr like this:
InfoObject: Reference Document Number, Type: Table Field, Field Name: EBELN, Selection Type: Parameter, Required Entry: X, Data Element: EBELN, Domain: Blank, SET/GET Parameter: BES
Any tips?
Regards
OlaHi,
i have replied wrong,
i mean that
when i am trying this,
http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN&GS_HEADER-OBJECT_ID='selected number value'
with field assignment: shopping cart number = GS_HEADER-OBJECT_ID (for drill down on particular field, i.e. open the URL with this field value entred from sender query's field shopping cart number)
result is coming: http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN&GS_HEADER-OBJECT_ID='selected number value'&GS_HEADER-OBJECT_ID=10000456
and when try this:
http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN
with field assignment: shopping cart number = GS_HEADER-OBJECT_ID
result is coming: http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN&GS_HEADER-OBJECT_ID=10000456
but not skiping the initial screen.
Thanks. -
Assigments to jump from BW-query to BP transaction
Hello,
I would like to know what assigments I should do in RSSB transaction to be able to jump from a BW query to BP transaction (CRM).
Thanks in advance.
CarmenHi,
The transaction code is RSBBS.Here you have to set the source query and the source target. and set the target to your BP transaction(CRM). The parameters depend on the way you want to have your jump.
Hope this helps.
Assign points if useful.
Regards,
Kiran -
Set/get variables with RSBBS from query 1 to query 2
Hi BW Experts,
I created a sender/receiver assignment from query 1 to query 2 using RSBBS. For two characteristics I assigned the processing method by Variable. Process mode for these variables in the receiver query is by customer exit. But I dont know how to set/get values of these variables.
Is there any function module to do it ??
Please help!!
Devthanks...but i m not used in RSBBS and i m afraid i m lost
could anyone explain me in detail :
- what i have to do for setting the sender & receiver,
- before to set parameter ID in the sender how to get the information of the current line (which will serve for the jump)
please help! i promise points
Dev -
Warning message on jump from a BI report
On jump from a BI report to another (from any characteristic or key figure), following warning message comes up in the second report "Source selection for 0FISCPER incompatible for target selection". This is user specific, not all users are getting this message. It is not an authorization issue. Please provide your thoughafter and soughtafter suggestions.
Edited by: Suprabhat99 on May 18, 2011 3:23 PMHi Suprabhat,
Please check if all the Query restrictions like variables,selection options,interval,hierarchy etc is same for Source and Target Query for that paticular char - 0FISCPER.
Then Incase there is no discrepancy in above types then please check SAP note 1265027:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31323635303237%7d
Also below forum should help resolve your issue :
Re: Jump Query
Regards,
Akanksha -
RRI Jumps from Different Characteristics Produce Different Results
Hi experts,
I am having the problem that when I jump from different characteristics in the same row in sender query, I got different result sets. E.g. when I choose "Go to" from the "Name" char I got one record, but from "Transaction Description" char multiple records.
Could anyone please clarify this problem?
Thanks,
JoonHi,
check the info object mapping in RSBBS. some time same kind of charactorstics is available in the destination report it show such kind of error.
Eg. 0customer to 0ship_to_party , or sold to party ect.
Just go to RSBBS
select the type as infoobject ...
Field name = target field
for more clarification please refer below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e63d5-b56f-2c10-718f-8e33a08baa89?QuickLink=index&overridelayout=true
regards
bvr -
WAD jump to query (RSBBS)
Hi Gurus,
I have one report in WAD and I want to create a jump to an specific query.
my report presents 10 KPI's and I want to know, can I use de context menu in one specific KPI1 that guide me to the QUERY1, and if I use the context menu in the KPI3 that guide me through QUERY3?
If i associate in tcode RSBBS 10 queries to my report in WAD, my context menu will always show these 10 queries?
Thanks in advance,
OswaldoHello,
The jump from one query to another query is not possible for a single KPI. The jump applies to all cells in source query. Its not specific for a particular key figure.
Hope that helps. -
Regarding Jumping from One Target to Other Target
Hi,
I have two Queries which are created on Cube and ODS. Have to Navigate/Jump from Query1 (Cube) to Query2 (ODS).
Query1 one contains char Sales Document and Query2 contains Sales document details. Moreover when i click on Sales document it should display only that particular document details. Is it possible.
Regards,
C.V.Hi,
Yes this is possible.. for this you would need to connect the output port of the first table view to the input port of the second query and create a on select event. this way you can pass the sales document from the first query and display its details in the second query.
regards,
Rk. -
Is there any way to prevent the OS from querying the Superdrive when start
Just a random question. Whenever my MacBook Pro starts up (either from sleep or a complete/fresh start, the OS queries the drive slot to see if there is a disc present. While this may be normal behavior, it seems to slow down the start up process. (I rarely ever have a disc in the drive). Just curious if this, in fact, normal, or if there's something awry.
Is there any way to prevent the OS from querying the Superdrive when start
No
he OS queries the drive slot to see if there is a disc present.
How can you tell? Based on the noise it makes? -
How to get formated value from query
i get value from query use the follow method
Object obj1 = dataAccess.getValue(i,j,DataMap.DATA_UNFORMATTED);
Object obj1 = dataAccess.getValue(i,j,DataMap.DATA_FORMATTED);
the first method retrun a value '1666.0',
the second method return a value null
but i want to get the value '1,666'.
who can tell me how can get the formated value?Ahu,
An implementation of DataAccess is not required to support all DataMap constants. For example, the OLAP-based Query object does not support DataMap.DATA_FORMATTED. To find out which DataMaps are supported for a particular implementation, you can call the DataDirector's getSupportedDataMap method.
If you have an Crosstab instance, there is a way to get the formatted cell value, based upon the formatting rules associated with the Crosstab. Get the GridViewFormatManager reference from the Crosstab, and call its formatDataValue method to return a String representation of the formatted data value.
Hope this helps,
djb -
I'm scared. Can you help? I can't jump from here to there.
Dear Apple MobileMe
I am very eager to make the move from MobileMe to iCloud, but...
As you can see from your own email, this is far from simple
My wife and I totally depend on my Macbook Pro (1), my old Powerbook that my wife uses (2), our iPhones (3 & 4), our iPad (5), my Time Machine, and my MobileMe (6), including Backups to our iDisk on MobileMe to keep our lives running.
iCal's synced across 6 Apple platforms
Address Books synced across 6 Apple platforms
Email synced across 6 Apple platforms (me using Mail and wife using AOL)
Bookmarks synced across 6 Apple platforms
Various apple ID's synced across 6 Apple platforms
You get the picture
I would hate to mess this delicately balanced Apple computer ecosystem up at all.
iOS 10.7 requires that I upgrade a bunch of my key work apps and figure out a way to transfer a 10 year dependence on Quicken onto some other equally robust financial management platform that doesn't seem to exist. Just to add insult to potential injury.
I'm scared.
Wish this whole process could be 500% more automated.
We've been on Macs and other Apple devices since 1987. I can't keep track of all of my "Apple ID's" for this and that that you've asked me to set up for each device and for each service over the years. Everything's registered with you.
Devices
MobileMe email aliases
iTunes
iDisk
App Store
AppleCare(s)
MobileMe
Apple.com support (here)
Apple ProCare
Apple iDisk Public folder
etc.
etc.
You should be able to gather all of my identities together into one place and figure out the best way to migrate me to the new Apple iCloud Garden of Eden.
You've got to find a way to help us work all this out. It's more than intimidating. We're frozen in fear. We just can't jump from here to there.
Steve
==================================================
On Dec 1, 2011, at 1:57 PM, MobileMe wrote:
iCloud is here Dear MobileMe member,
iCloud is here and you can now make the transition from MobileMe. You can move your
MobileMe mail, contacts, calendars, and bookmarks to iCloud, and keep your me.com and
mac.com email addresses. iCloud is a breakthrough set of free cloud services, including iTunes in the Cloud, Photo Stream
and Documents in the Cloud, that works seamlessly with your iPhone, iPad, iPod touch, Mac or
PC to store your content in iCloud and push it to all your devices. When content changes on one
device, all your other devices are updated automatically and wirelessly.
Making the Move
Before moving to iCloud, make sure that your iOS devices and computers have the required
software and your data is properly backed up by following these steps:
Get iTunes 10.5.
Download iTunes 10.5 to your Mac or PC.
Update your devices to iOS 5.
Update your iPhone, iPad and iPod touch to iOS 5 by connecting each
device to your Mac or PC and following the instructions in iTunes.
When you are asked to provide your Apple ID during iOS setup, use
your MobileMe email address and password.
Update your computers.Mac: Update to OS X Lion v10.7.2PC: Update to Windows 7 or Windows Vista Service Pack 2 andinstall the iCloud Control Panel for Windows.
Back up your MobileMe data.
For detailed instructions, review this article.
Verify your contacts and bookmarks.
Verify that your contacts and bookmarks are completely up to date on
at least one device you will use with iCloud. They will be uploaded to
iCloud from your devices after you move. iCloud will not copy any
contacts or bookmarks directly from me.com.
When you are ready, go to me.com/move and follow the instructions to move your account to
iCloud.
Important Notes
If your me.com or mac.com email address is used with more than one Apple ID, you may be
unable to access some iCloud services. If this occurs, you can remove duplicate email
addresses from your other Apple IDs by visiting My Apple ID. You can also use different Apple IDs for iCloud and your Store purchases (including iTunes,
App Store and iBookstore). For more information and detailed instructions, review this article. You can make the move from MobileMe to iCloud anytime between now and June 30, 2012. For
answers to some of the most common questions about the transition, see the MobileMe
transition FAQ. Sincerely,
Apple
iCloud requires iOS 5 on iPhone 3GS or later, iPod touch (3rd and 4th generation), iPad, or iPad 2; a Mac computer
with OS X Lion; or a PC with Windows Vista or Windows 7 (Outlook 2007 or 2010 or an up-to-date browser is
required for accessing email, contacts and calendars). Some features require a Wi-Fi connection. Some features
are not available in all countries. Access to some services is limited to 10 devices. Previous purchases may be
unavailable if they are no longer in the iTunes Store, App Store, or iBookstore.
MobileMe is a service provided by Apple • Terms of Service • Privacy Policy
Copyright © 2011 Apple Inc. • 1 Infinite Loop, Cupertino, CA 95014
You are receiving this email from Apple to notify you of service information regarding your MobileMe account.This is a user-to-user forum: you aren't talking to Apple here.
I do sympathize with your situation: you are among many for whom upgrading is impracticable, but who are dependent on MobileMe facilities which will be withdrawn next June.
As you say, you will need 10.7.2 to access iCloud on a Mac, and iOS5 for mobile devices.
I can't offer you any easy solutions, but this list may at least clarify the exact situation for you:
Your email, calendars, contacts and bookmarks, and 'Find my iPhone' will be migrated to iCloud.
Your iDisk, together with website hosting and Gallery. will continue to work as before until next June.
You will be able to access email, calendar and contacts on the iCloud website at http://icloud.com provided your browser is reasonably up-to-date.
You will not be able to sync contacts or bookmarks from a pre-Lion Mac.
You will be able to enter the server settings for email manually in the Mail application and access your email.
You will not be able to sync your calendars directly.
Some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point. BusyCal is an iCal-like calendar application with extra facilities: it can sync with the iCloud Calendar while running on Leopard, Snow Leopard or Lion.
There appears to be no method of syncing contacts (though Address Book on a Mac can be synced with Google or Yahoo address books - I don't know how reliable this is).
Maybe you are looking for
-
How do i copy a photo from iPhoto to a memory stick
Can someone help me with this qwestion?
-
Sony a7 mk2 ARW files will not import
I have a Sony RX100 and LR 5.7 imports the ARW files ok, However I've just bought an A7 Mk2 and Lightroom will not import the ARW files from that camera. I've downloaded CameraRaw 8 so I can convert the files first and then import into LR, but it see
-
BP for Enterprise Asset Management (EAM)
Hi All I am new to EAM. I am trying to locate Business Packages for EAM on market place but didn't any success. Appreciate if anybody could help me to locate the Business Packages for EAM on market Place.
-
HT4623 how do i get the music to my phone
please can u tell me how to download music from the computer to my phone thankyou xx
-
Recording in the dark, Nokia N8
Tried recording a video last night in the dark, no lights on what-so-ever. The video recorded fine, perfect sound but couldn't see a thing. Obviously didn't get to see what I tried to video. Is there a function on the phone where the light on the pho