Jump/RRI from BCS to GL
Hello BI gurus,
We have BCS reporting and GL reporting. The requirement is to jump from a BCS report (containing Consolidated numbers) to the GL line item level (for the Unconsolidated numbers).
Our BCS report has BCS_LITEM/Account in the rows, time based structure (current month, prior month) in the columns and the entire report is fitlered by Cons Group.
We are mapping BCS_LITEM to 0GL_ACCOUNT and using an exit mapping the 0CS_VERSION to the 0AC_LEDGER. The jumps are fetching the required data based on the two fields mapping.
The issue we are currently facing is that when we jump from a Consolidated report to a GL report, the receiver/jump query displays all Companies and not just the Companies in the BCS report.
The BCS report is filtered by Cons Group (0SEM_CGCOMP). Cons Group internally in BCS fetches the underlying Companies (0COMPANY). We are not drilling down/across by 0COMPANY in the BCS report. I am trying to pass the 0COMPANY (as automatically filtered based on Cons Group) values from the BCS report to the GL report. So far, I have been unsuccessful.
If I drill across by 0COMPANY on the BCS report and jump from a "Account/Company" intersection cell, the 0COMPANY value gets passed to the GL report. But without the 0COMPANY drilldown/across, the set of 0COMPANY (multiple values) are not being passed to the 0COMPANY characteristic on the receiver query.
Any help in this regard is appreciated.
Thanks,
Vivek
Got the problem resolved by passing 0COMPANY values across. Created 3 Customer Exit variables on 0COMPANY (Company Hierarchy, Hierarchy Version and Hierarchy Node) and passed values as entered for the Cons Group (Cons Group Hierarchy, Cons Group Hierarchy Version and Cons Group Hierarchy Node) to it. This passed across the 0COMPANY values across to the GL query, thus restricting data to only the entities in the specific Cons Group.
Assumption: Every Cons Group hierarchy will have a corresponding Company hierarchy with the same technical name.
Similar Messages
-
Jump target RRI from BW report to CRM Portal
Hello Experts,
Need to create a Jump target from the BW query to CRM Portal Tcode CRMD_ORDER.
I am passing the transaction number ( similar to sales order in R/3) to this tcode CRMD_ORDER in CRM
Step1) create the receiver
Type: Transaction. Defined the source system and entered the Tcode CRMD_ORDER in the 'report' field.
Receiver is created
Assignment. details:
I can see the source infobject 0CRM_OBJ_ID from the Infobject column; Type : Infobject; Field name : OBJECT_ID / GV_OBJECT_ID;
OBJECT_ID is the table field in the CRM System for the transaction number.
GV_OBJECT_ID is the screen field name in the CRM system for TCODE CRMD_ORDER.
I tried with both the OBJECT_ID and GV_OBJECT_ID.
Expected result: Open the Tcode CRMD_ORDER with the transaction number eg: 1000001 that is passed from the Bex report. Currently that is not happening. It is opening Tcode CRMD_ORDER but not the document 1000001. I have to manually open it.
Please suggest if anything got missed in the definetion of RSBBS.
Regards,
BWerHi,
What I found out so far is that by using a URL like
http://...:8060/sap/bc/gui/sap/its/BBP_POC_DISPLY?sap-client=300&sap-language=EN&PO_GUID=490622657B526483E10000000A0A3D25
in RRI it is possible to jump from a BW web report to SRM to display a corresponding purchase order. This URL uses the PO_GUID, but with help of a couple of lines of ABAP in a custom BSP I was able to use the PO number instead of the GUID, too.
In general I am looking for URL's do display purchase oders, shopping carts and confirmations in SRM and URL parameters that can be used. Or anything related to that topic.
From my experience users find it very useful to easily jump from BW into the original transactions to clarify potential issues there. I have implemented this a lot in the past with BW and classic R/3 GUI transactions, so I'm looking for a way to implement this with SRM as well.
Best regards,
Rudolf -
How to transport Jump Queries (RRI) from DPW to QPW
Hi,
I need to transport the Jump Queries from D to Q.
I have one sender Query and 2 Receiver Queries. I would like to transport them to Q. In the transport connect I can able to select the sender Query and The receiver Queries are not found.
Please let me, If I transport my sender Query will the receiver Queries will be automatically transported.
Regards,
ReddyHow have u been transporting all ur queries?
Its the sameway how u generally transport queries but make sure u find all ur 3 queries with whats underlying beneath in the flow.
In RSBBS open the assignment n on top ull see a Truck Icon - Collect & Transport. -
Error while RRI from BW reports to ECC CJI3 transaction
Hi All,
When we try to set up RRI from BW reports to ECC CJI3 transaction, we get an error message (Stop message):
You cannot use the report-report interface to call up report RKREP000
Diagnosis
Line Item report RKPEP000 is not suitable for the report/report interface
Procedure
Always enter RKPEP000 as the receiver report for project line items in the report/report interface. This program uses the transfer parameters to determine which line item reports can be accessed.
<b>As per the other reply tried the ABAP Report RKPEP000/3 also ..no use ..
can you please suggest , how to go about this CJI3 issue for RRI , what settings need to be done in the RSBBS ...</b>
We have attemped to use "S_ALR_87013543" as well but the parameters don't go through properly which means when a user jumps from a BW report, they end up at the ECC selection screen of S_ALR_87013543.
Drill through is working for our Cost Center reports. Just not this one in particular.
Any advice would be greatly appreciated.
prasadHi,
I'm facing the same problem so please If you have found some solution please tell me what should I do to use RRI from BEX query to CJI3 transaction.
Regards,
Ana -
JUMP (RSBBS) from a query on a transaction(local)
Hi,
Can You help me ?
I want to do a jump from a query on a transaction RSDMD (on local system).But particullary, I want to put in parameter the data (doc number) with wich I jumped.
So How I have to define the assignement detail in RSBBS for the transaction RSDMD?
Because, for the moment I have a popup where I must fill the name of my charactéristic and after the number of my doc number (for example), and it's with the doc number that I do my jump.
But, I don't want to fill characteristic and doc number, I want that it's automaticaly...
Thank you for your help...
Carine.Calling the RRI with a transaction or an ABAP/4 Report as the receiver is done with the RRI
from the SAP NetWeaver Application Server. This is possible in an ERP system, a CRM
system or within the BI system. The selections are prepared by the BI system that does not
recognize the transaction or the report. The assignment is transferred from the RRI of the
SAP NetWeaver Application Server using inverse transformation rules. There must also be a
complete chain from the DataSource of the source system to the InfoSource, through
transformations up to the InfoProvider. This does not mean that data absolutely has to be
loaded using this chain. If this chain does not exist, the RRI cannot transfer the selections to
the source system. Calling the RRI only works for fields with dictionary reference. For ABAP reports, this means that the parameter has to be PARAMETERS param LIKE <table_field>
For transactions, this means that the Dynpro has to have a dictionary reference. Not every
transaction can be called with the RRI of the SAP Application Server.
These are the steps to do this
If you want to jump from a Web application to a transaction or ABAP/4 report using the
RRI, an ITS for the target system has to be assigned beforehand.
● The value of the input field to be supplied must be known at the time of the jump (for
example by entering a single value on the selection screen of the sender or by the
cursor position at the time of the jump).
● Sender and receiver fields that correspond to one another generally must link to the
same data element or at least to the same domain, otherwise the values cannot be
assigned to one another.
● The assignment of sender and receiver fields must always be a 1:1 assignment. For
example, the transactions called from the start screen cannot have two input fields of
the same data type. Then it is not clear which of the fields is to be supplied, which
means neither of them is supplied.
● There has to be a complete chain from the DataSource of the source system to the
InfoSource, through update rules up to the target.
Proceed as follows after you have created the sender-receiver assignment as described
above.
1. As the type, choose Table Field. The columns Field Name, Data Element, Domain and
Set-/Get Parameter become input ready.
2. Specify the field name, data element, domain and parameter ID for the receiver
transaction. You need to know this information because input help is not available. You
can usually find the parameter ID in the ABAP dictionary entry for the data element.
If this does not always make jumping to the transaction possible, it may be necessary to
program a short ABAP start program. For more information on how to do this, see SAP Note
number 383077 -
Problem in Query jump (RRI)
Hello Gurus,
I have created Query Jump (RRI) using Transaction RSBBS.
I have assign 3 query.In Development its working fine one can jump from one query to another,my problme is that after transport this query jump links are missing although query are working properly but Query jump link is missing.Is some thing addictional need to be done for Query Jump (RRI),please suggest.
Thanks & Regards,Hi Wajid
How you have collected the transport. Please follow the procedure given below
RSA1-> Transport Connection - >Object Types -> Report-Report Interface -> Collect the transport and assign it to transport request .
Hope this helps
Regards
Pradip
(Don't forget to assign points) -
HELP! How to make RRI from BEX query into Workbook with one report???
How to make RRI from query into Workbook???
Hi Alex,
A workbook is a set format of queries, so when you try to jump to another query , you will definitely open another session and hence another excel file. This is the same for web templates also though you have an option of opening the new result in the same window.
You would have to use some macros and open the query on the same page. A RRI is a query jump and not a drill down . A drill down would be getting more of the dimensions into the query.
Regards
CSM Reddy -
Unexpected query results during large data loads from BCS into BI Cube
Gurus
We have had an issue occur twice in the last few months but its causing our business partners a hard point. When they send a large load of data from BCS to the real time BI Cube the queries are showing unexpected results. We have the queries enabled to report on yellow requests and that works fine it seems the issue occurs as the system is processing the closing of the request and opening the next request. Has anyone encountered this issue if so how did you fix it?
AlexHi Alex,
There is not enough information to judge. BI queries in BCS may use different structure of real-time, basic, virtual cubes and multiproviders:
http://help.sap.com/erp2005_ehp_02/helpdata/en/0d/eac080c1ce4476974c6bb75eddc8d2/frameset.htm
In your case, most likely, you have a bad design of the reporting structures. -
Problem of running the jump query from the result line
Dear expert,
I have a problem when running a jump query from the result line. Apparently, the values of the caracteristics haven't been sent to the jump target. However, the configuration in RSBBS seems to be good as the jump works well from the other lines.
Does anyone have some ideas on that?
Thanks in advance!Hi,
If you are supposed to bring across characteristic values to your target, then you will not be able to jump from the result line. The configuration expects that the values of the characteristic marked as being used in the jump are filled with unique values. When you use the result line as a source for your jump, the values in the result line will most likely be based on the sum of multiple characteristic values.
Hth,
-Jacob -
I’m trying to create a “jump menu” from a
database table.
I’ve created the jump menu by using a "List/Menu" and a
"Dynamic" connection, this displays the items correctly.
Next I’ve used “Go To URL” and set the
parameters for the page load to use the value of the List/Menu to
load the required webpage and oppropriate value.
The page loads however it doesn’t show (or use) the
value from the List/Menu
Any ideas?
Heres my code
<select name="selPRINT" id="selPRINT"
onChange="MM_goToURL('parent','conPROD.asp?REF=<%=cStr(Request.Form("selPRINT"))%>');retu rn
document.MM_returnValue">
<option value="">Select your printer...</option>
<%
While (NOT rsPRODUCT.EOF)
%>
<option
value="<%=(rsPRODUCT.Fields.Item("printDELLref").Value)%>"><%=(rsPRODUCT.Fields.Item("pri ntPRODUCT").Value)%></option>
<%
rsPRODUCT.MoveNext()
Wend
If (rsPRODUCT.CursorType > 0) Then
rsPRODUCT.MoveFirst
Else
rsPRODUCT.Requery
End If
%>
</select>I have the answer.
First I created a list/menu and associated my database item
to it.
Next I created a jump-menu.
I then used the database code from the list/menu and inserted
it into the jump-menu.
Finally I added the option value of the page I wanted to
load.
Here’s my final code…
<select name="jumpMenu" class="SmallBLACK" id="jumpMenu"
onChange="MM_jumpMenu('parent',this,0)">
<option
value="conPROD.asp?REF=<%=(rsP.Fields.Item("printDELLref").Value)%>">Select
your printer....</option>
<%
While (NOT rsP.EOF)
%>
<option
value="conPRINTdetail.asp?REF=<%=(rsP.Fields.Item("printDELLref").Value)%>"><%=(rsP.Field s.Item("printPRODUCT").Value)%></option>
<%
rsP.MoveNext()
Wend
If (rsP.CursorType > 0) Then
rsP.MoveFirst
Else
rsP.Requery
End If
%>
</select> -
Consolidated Cash Flow (Indirect method) from BCS
Hi all,
I would like to find out how consolidated cash flow using indirect method be generated from BCS? Anyone has any ideas.
Thanks in advance.
Regards,
JasmineHi Dan,
Very interesting! Though, I didn't get the answer. Think it would be very favorable for everybody, if you explain in more details.
AFAIK, data is stored in BCS periodically. So, do you imply that it's possible to create cash flow for any set of data in the system (because of periodicity)?
Talk about ttypes and breakdown categories are also not very clear for me.
Anyway, I'd like to talk functional, not SAP (or some other IT) language.
Here we go.
Did you say that you used to create the cash flow report on the fly, by using some calculations in BEx?
And the same for eliminations in cash flow?
Did you do eliminations in CF?
If yes, then I would suggest that you were lucky, having local and group currency the same, USD?
As BCS consultant knows, the indirect cash flow report consists of 3 parts: net cash flows from operating activities, finance and investing ones.
NCF from operating activities is usually calculated as net profit (before or after taxes) with some corrections that are calculated as differences in reported-beginning balances on some accounts. Would you calculate them in local or group currency? Taking into account that there might be no real movement in cash (local currency), but currency rate has changed?
Financial & investing activities MUST BE PROVIDED in direct sense, like: dividends received, interests paid for credits and loans etc. There is, usually, no such information, only some netted activities. You need to get them additionally. How did you get them?
So, the main question is:
how would you calculate the CONSOLIDATED INDIRECT cash flow report
having different local currencies (and a different group currency), with some intergroup activities?
Everybody will appreciate your input on this subject. -
When I touch the trackpad the cursor jumps away from the bubble.
I thought this might be a bug, but I'm not sure anymore. I have Sophos for Mac and it hasn't noted any problems. What happens is that when I initiate a tap on the trackpad the cursor jumps away from the item or bubble I am trying to tap. It is annoying but not bothersome enough to ruminate about. I'm wondering if anyone has had this problem?
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac -
BAPI to export features of Exceptions and Jump query from BW system to othe
Is there any BAPI is available to export features of Exceptions and Jump query from BW system to other SAP or Non SAP system, whereas won't need to re-define Exceptions and Jump Query. I mean directly export features of Exceptions and Jump query from BW system to other system.
Thanks,
RohanThanks for quick response.
I am working on Hyperion, they are using essbase, and Integration connector to connet BW directly and takes data from BW System.They have features to define Exceptions(Traffic Light) and Jump query in the Hyperion side. But now they want to import directly features of Exceptions(Traffic light) and Jump query from BW System(using BAPI) instead of defining Exceptions and Jump Query in the Hyperion side.
Please help me on this.
Thanks,
Rohan -
Hi Folks:
Someone have reference or "how to" Migrate CONCOLIDATION from BCS to BPC?
Thanks in edvance....
NoéHi,
The migration cannot be done directly, as the structures are quite different in BCS and BPC. I would request you to go through the Application help available on SAP Marketplace. This guide will give you some insights on the various business rules which are used for doing the consolidation. In addition to this, BPC 340 will give you a good understanding of configuring consolidation on BPC on NW platform.
Hope this helps. -
My Ipad2 jumps around from app to app without touching the screen? What is causing this?
My Ipad2 jumps around from app to app without touching the screen? What is causing this?
What iOS are you running - iOS 7.1.1? Some of the latest iOS fixes addressed this.
Cheers, Tom
Maybe you are looking for
-
I'm using Maps 3.01. How do I save a location, either on line or off-line? It seems I have to open Landmarks and then open another interation of Maps in order to do something as simple as saving my current location (when online) or finding a location
-
A tutorial on custom workflow creation?
I have tried using Apple's documentation to customize a workflow. I took the Blog workflow and took out some of the encodings, didn't need them. I wanted to have the workflow to post to another group. I created four new properties and also changed th
-
Reagrding free version for oracle e-business suite 11i
hello everybady, Are you happy ? i hope so.... I am new member of this group , I want to install demo ( free) version of oracle apps on window 7 for practise . Please help me....
-
Duet Enterprise Virtual Launch Summit
Hi, I just want to highlight the virutal kick-off event that will begin on Feb 1st. Make sure to visit the [Duet Enterprise Virtual Launch Summit|http://www.duetenterprisesummit.com/] When you register (it is free!), you can interact with specialists
-
I have function and producer how to apply in form 10g block table
Dear All help me i have create function or package in plsql but i have not understand to apply form developer 10g block tables so kindly guide me fully thank for cooperate and support me