Keeps changing my Device Type to XSAN

Hello
I installed FCS and did all the updates. I create DEVICEs for all my devices. They are local. Everything seems fine. The next day, I try to work with my devices, and FCS has changed the "type" to XSAN, and says I have to enter a valid XSAN address for the device. How can I change the type back to Local? Why is it changing on me?
Thanks,
Jim

Device type "Xsan" = device's "edit-in-place" enabled, that is all to it. I suspect Apple developers named this device status "Xsan" in order to make more customers buy Xsan, and they just "forgot" to mention that to their 1st tier pro apps support people
So, if your device can sustain multiple video read/writes and can be shared, you might want to consider enabling "edit-in-place" or, in other words, get it "Xsanized" for Final Cut Server.

Similar Messages

  • Output different if Device Type changed from SWIN  to HPLJ4

    Hi,
    I have a few problems here for my SAP smartform. Hope someone out there can help.
    1/ I am using font: Helvetica for my smartform. I realized that the output (on Print Preview as well as the actual Print output) shows a different font if I chose Device Type: HPLJ4. If I choose my actual printer HP4250 as the Device Type, the font is the same as that shown for SWIN as Device Type, but the spacing is a bit different. Is there any way I can make sure that the font type, spacing will not differ for a different Device Type?
    2/ The reason why I am not printing using SWIN as Device Type (which will ensure consistent output even if printer is changed) is becoz I need to use the PCL5 print control commands to rotate a certain section of text in my smartforms- which is only possible on HP PCL5 printers. Is there any way I could rotate text in smartforms without print commands and yet I can still use SWIN as Device Type? (pls do not suggest creating a bitmap picture for the text).
    <b>In short,</b> I need to know how can I ensure consistent output (same margin, same font, same font spacing) even if a different printer is used (any Device Type I can use?) and at the same time, enable me to rotate a certain section of text in my smartform(180 degrees)?
    Thanks very much for any help.

    Hi,
    For the first question, generally the output (spacing etc) changes when you change the device type. So you need to adjust the alignment according to your output type.
    Thanks,
    Nagendra

  • Changing device type of external Bluetooth speaker

    I have an Aura Blunote speaker. I am attempting to connect wirelessly. It will only connect as a 'headphones' type device.
    Can it be changed to a 'speaker' type device as this will drastically improve the sound quality? Changing the device type does not come up as an option when i am pairing the device.

    Same issue
    Works fine on my HTC thunderbolt, Even works fine on my brothers Mac (same year and OS build).
    My audio used to work fine through my bluetooth adapters but now the audio is way lower than it should be. This is a recent problem, it worked fine before. I believe an update may have cuased this, then again my brothers mac is working just fine even after the update. I even tried switching the bluetooth adapter and it still has the problem so I know its my Mac.
    Please fix this issue...
    Me and my brother Both have 2011 Macbook Pros, running 10.7.4 and the adapters are Blackberry adapters used to receive the audio from my mac and play through my home entertainment system via aux jack from the bluetooth adapter.

  • Device type to be used for Zebra 220XiIII Printer

    Hello All,
    We are printing labels from SAP to the printer Zebra 220XiIII Printer using Adobe Print forms technology. When configuring the printer, we used the device type as PDF1. The print was fine in terms of data display and positioning of the text and barcodes but the issue is that it takes 30secs. to print each label. This was not acceptable as it is creating delays in Shipment.
    To address the issue we changed the device type to LZEB3. The print was fast i.e., in 20 seconds the printer was able to print 5 labels but the font on the label is increased automatically because of which the data on the label is truncated.
    Does any one have any ideas on what is the device type to be used and is there any specific font to be used?
    Please note that we desinged the forms using ADOBE FORMS TECHNOLOGY. There are many notes in Service market place which are specific to Smart forms. Please come up with your ideas.
    Regards,
    Praveen T

    Hi Florian,
    Thank you for your response. We were able to fix the issue by changing the Device type to LZEB2.
    For some reason YZB200, YZB300 and other device types which we found in the device type wizard did not work in our case. We did not investigate the reason as LZEB2 worked and we have time crunch
    Regards,
    Praveen T

  • Changing FPGA target types after Obselescence

    Hi. Can anyone advise of a clean way to migrate or copy / paste my CLIP modules between FPGA targets, please? I've about 30 test rigs, each testig a different product. Each contains a PXI-7833R card. We had one fall over recently and I learned that the card is now obsolete. The PXI-7842R is touted as a drop-in replacement. I'm finding the software support for migrating in the project to the new FPGA somewhat cumbersome. I had hoped I could simply change the device type in FPGA target properties, but it appears that I can't change the FPGA target type; apparently the target device can only be set when the target is first created in the project. Normally, this wouldn't be a problem, since the contents of the old (7833) target can be copied and pasted into the new (7842) target within the project. However, my FPGAs are now using VHDL components and the CLIP properties cannot be copied / pasted: they need to be added and configured manually, which is quite labourious. Each of my pijects might have 10 CLIP modules to manually configure and I'm dreading it, but in order to minimise test rig downtime in the event of a failure, I wish to build each of these projects for the new PXI-7842R target hardware in advance of requiring it. Anything the community can suggest would be a help. Thanks.

    It probably would have been a good idea to hit "Preview" before posting. This is a re-post, but much more pleasing to the eyes!!
    Can anyone advise of a clean way to migrate or copy / paste my CLIP modules between FPGA targets, please?
    I've about 30 test rigs, each testing a different product. Each contains a PXI-7833R card. We had one fall over recently and I learned that the card is now obsolete. The PXI-7842R is touted as a drop-in replacement. I'm finding the software support for migrating in the project to the new FPGA somewhat cumbersome.
    I had hoped I could simply change the device type in FPGA target properties, but it appears that I can't change the FPGA target type; apparently the target device can only be set when the target is first created in the project. Normally, this wouldn't be a problem, since the contents of the old (7833) target can be copied and pasted into the new (7842) target within the project. However, my FPGAs are now using VHDL components and the CLIP properties cannot be copied / pasted: they need to be added and configured manually, which is quite labourious.
    Each of my projects might have 10 CLIP modules to manually configure and I'm dreading it, but in order to minimise test rig downtime in the event of a failure, I wish to build each of these projects for the new PXI-7842R target hardware in advance of requiring it.
    Anything the community can suggest would be a help.
    Thanks.

  • Convert_otf - Identify device type

    Hi Experts
    I am more of a functional consultant, so please excuse if this is simple thing to find out.
    We are calling functional module CONVERT_OTF through a custom program to convert outputs of billing documents into a PDF file.However the PDF file generated has alignment and formatting issues. So we checked further and our ABAP consultant mentioned that the device type 'SCREEN' is used while converting the output into PDF format. This device type does not have any formats attached we we can see through transaction SPAD. So they feel this is the reason for incorrect format / misalignment of PDF output.
    So we want to change the device type 'SCREEN' to 'WINSAP' which has all the required formats attached to it.
    However our abaper does not not know when the program calls for device type and where to change it. He feels that output device type is called by standard FM CONVERT_OTF and we need to check with SAP on the same.
    Therefore we need to know how we can change device type for this requirement.If someone has worked similar query, please help us to resolve this. Any pointers would be highly appreciated.
    Regards,
    Santosh

    Hi Santosh,
    If your requirement is to save the preview as PDF of the billing documents, you just need to type PDF! in the command field of the print preview screen and do a f8 then a pop will come up and then you can save or print the preview.
    Note : you have to type PDF in Capitals and along with ! (exclamation mark symbol) i.e. PDF! .
    Hope this helps.
    BR
    Dep
    Edited by: DeepakNandikanti on Aug 16, 2011 8:57 PM

  • Device Type to print IR56B

    Hi,
    What is the device type to be used for generating and printing the IR56B form with Chinese Character?
    We are currently using the following device types:ZHANWIN and SAPWIN. However we cannot print the IR56B form completely. The bottom part (I.R.56B) is missing. We cannot change the device type because the form should be printed in one sheet as per client's requirement. And the form should print Chinese Characters. So, is there a note that we should apply to print the IR56B completely or is there other device type that we can use?
    Please advise asap.
    Thank you,
    Claire

    Hi Salil,
    Thanks for that information. However the issue is when we print the IR56B form, the "I.R.56B" is missing at the bottom line of the form when we use the device types:ZHANWIN and SAPWIN.
    But when we use the device type: HPLJ4000, the "I.R.56B" is not missing at the bottom line of the form however the hard copy is being printed into 2 separate sheets and cannot print Chinese characters.
    Is there a note or anything that we need to change in the format setting of device types:ZHANWIN and SAPWIN?
    Thank you,
    Claire

  • Output device type

    Hi All,
    To get the print of a PO one device type is getting selected, but we came to know that we need to select another device type so that we can take the printout of the PO with out any problem. But i am not sure where to change the device type in the PO.
    Thanks,
    Raju

    Hi Raju,
    You can change the device type using transaction SPAD - Spool Administration.In here select Output devices and select the printer which you are using to print the PO, then change the device type.You may need the necessary authorization to do this.If your output device is not listed, then you can create a new one. For a list of device types, see SAP Note 8929 in the SAP Service Marketplace.
    Award points if found useful.
    Thanks,
    Praveen

  • Device type for printer LOCL

    Hi everyone,
    Do you know a device type for LOCL that will be suitable for all the formats? Our users are using printer LOCL. We Had an issue before that the font of the printout is larger than the usual so we changed the device type. Recently, another user complained because the font of his printout is smaller than the usual. These are two different users with two different types of output devices but both are using printer LOCL. A change in the device type will correct one issue but will raise another. Please help. Thanks.

    Dear Sheryl,
    Check if you maintained value '__DEFAULT' for Host Printer under Access Method.
    Also, Device Class is Standard Printer.
    Regards,
    Naveen.

  • Adobe Form Device type and Smartform Device type

    Hello experts,
    Please tell me It there any Body Whose Company is Using both Adobe Form and smartform too?
    If YEs
    Can You Please tell me how they are Printing Adobe Form and Smartform. Whenever End user take the Print out they changed the Device type Or using only one type of device type for both smartform and Adobe Form.
    Thanks in Advance
    Shelly Malik

    Hi,
    refer the following link.
    [http://help.sap.com/saphelp_nw70/helpdata/en/25/6fa8fd27837846990a7a6813b06f80/frameset.htm]
    Regards,
    Surendar Reddy.

  • Wrong Device Type Selected

    This is a partial fix when a wrong device type is selected in the network map, either by you or Network Magic. The first step here was NOT done by me, but by "mbroadfo". He did an excellent job on figuring this out. There is a quicker and easier way however, once you do mbroadfo's work. This was his post under "Network Map Issuses Solved!:
    09-22-201010:02 AM 
    I have been trying to figure out how to resolve a couple of issue with the Network Map in Cisco Network Magic (I have version 5.5.9195.0). The problem is that the device names and types I established initially don't get updated correctly in the map when my DHCP server assigns a new IP address. Network Magic does not seem to recognize the device by the MAC address and seems to put too much stock in the IP address (which is strange as DHCP is prevalent on most networks).
    In order to re-initialize the network map, perform the following steps on ALL PC's running Network Magic:
    1) Do not de-install Network Magic (it's not necessary unless you want more work)
    2) Run: serveme.exe from "C:\Program Files\Pure Networks\Network Magic\Support\" (or wherever you installed Cisco Magic) - I created a shortcut so I can do this in the future without hunting around
    3) Find the System Tray icon for serveme (it's a green dot surrounded by a white box)
    4) Right click on the serveme icon and select:
    - Stop NmService (the first item)
    - Delete NetworkLib.xml
    5) Repeat on ALL PC's running Network Magic
    Once you have finished on ALL PC's, perform the following on each PC with Network Magic installed:
    1) Right click on the serveme icon in the System Tray and select:
    - Start NmService (the first item)
    - Force First Run (the eleventh item)
    - Exit ServeMe
    2) Double-Click on Network Magic icon on the System Tray
    3) Click the Link to restart the Network Magic Platform
    4) Go through the initial startup steps per the instructions in the User Guide
    5) Repeat on ALL PC's running Network Magic
    Hope this helps!
    Foot
    The one problem that I kept having, was on one laptop in particular. Once I got all other PC’s correct, this one followed in suit. (I guess I should mention briefly, there are always at a minimum, 5 laptops, 2 desktops, 2 network drives, 3 network cameras, 1 network printer and 3 game consoles listed on the network map. More if friends come over.) You can see my dilemma if one of my device types change. One step left out by mbroadfo, if you have multiple computers with Network Magic on them, only have ONE connected to the network with a complete map at a time. If anything changes to the device type, all of the computers will change their device type and you will have to start all over again.
    1. Leave all of your network devices turned on. Follow the steps above to disable Network Magic.
    2. On one computer, follow the steps above to get Network Magic running again. Once you have a full map of all of your correct devices displayed, proceed to step 3.
    3. Go to the following folder: C:\Users\All Users\Pure Networks\Platform
    4. Copy this file: networklib.xml
    5. SAVE THIS FILE somewhere in a folder where you know where it is. You could rename the copy to something like network.xml.temp
    6. Go to the next computer, leaving the first PC running all the time on the network, and start Network Magic. Network Magic's network map should populate with the first PC's map. If anything changes, you can restore the xml file on the first PC. I'll explain this step later. Once the map is populated correctly, do the same thing on copying the "networklib.xml" file on the second PC, disconnect the second PC from the network or shut it down so its map cannot change. DO NOT copy the "networklib.xml" from the any PC to another thinking it is a short cut. Each "networklib.xml" file is specific to that PC. Move to the next PC and perform step 6 again until all PC's running Network Magic are done.
    7. Once all PC's are done, they can all be brought back online and life should be great.
    Now for the easier part. From this point on, if the map ever changes, simply exit Network Magic, open Task Manager and stop the nmsrvc, go to C:\Users\All Users\Pure Networks\Platform and delete "networklib.xml", copy your saved version of that file back to this folder and restart Network Magic. I know that the initial setup takes a while, but it is easier in the end if anything changes. I use the map and shares to access my cameras and network drives and if one of those changes to any type of computer, you cannot change the device type back. The software needs to have the same type of selection for all device types as when the "Network Device" in the drop down's is selected. I have just spent hours trying to get all of my devices set back to normal. I hope this will help some of you from repeated frustration when something changes.

    Since I wrote the previous fix, I have had some other issues which forced me to correct several times, the Network Magic map. This was for the most part, letting other people have access to change the map. I have since put passwords in place to stop that. I have come up with a shorter way to do the fix that I suggested and found a possible flaw in the previous fix. I don’t know why or where this comes from, but on all of the computers that I have, NM has two different names for the process that runs. Two computers can both be 64 bit hardware and 64 bit OS and still have different process names. The following is what I am using now and works fine for me, but from what I am seeing no matter what software package, whether game or tool, each computer is so unique, the same problem may be on computers with two completely different fixes. Anyway, the following steps are what I am using now and works great on my systems. Hope maybe these steps will work on yours:
    1.       Goto each computer and do the following steps in order. Right click on the Network Magic icon in the notification area of the task bar and exit Network Magic. Next, open Task Manager and click on the Processes tab. This is where NM uses two different names that I have seen: nmsrvc.exe or nmctxth.exe . Which ever process is running, end the process. Next, click on the Services tab. Scroll down until you find nmservice. Right click on nmservice and select Stop Service. Wait to make sure the Status column changes from Running to Stopped. It may take a few moments. If it does not stop or a message appears saying that the service cannot be stopped, click on the Services button at the bottom right corner. Scroll down on the Services window until you find Pure Networks Platform Service. Right click on the this and click on Stop. Again, wait until the status column changes from Started to Stopped. I have tried to just stop the service, but all of the steps above have to be done in order for this to work. This service is what communicates between this computer on all others running NM and tells them what is in the map. Leave this window open and proceed to step 2.
    2.       Go to C:\Users\All Users\Pure Networks\Platform folder. Delete the file networklib.xml on all computers.
    3.       Once step two is done, go back to the Services window and right click on Pure Networks Platform Service and click on Start. When the Status column changes back from Stopped to Started, click on your Network Magic icon to restart the program on one computer only. Watch to map to make sure it populates correctly. If not, you can simply delete the networklib.xml file at this point without having to stop the service again. The map should start over again from scratch. (John.h2h, see at the bottom of this for a possible area to look at for your issue.) Once the map is correct, goto the next computer and do step 3 again. If the map is correct, disconnect the second computer from the network and proceed on to the next computer. If it changes, you only have two computers maps affected and it is simpler to correct at this point. Once all computers have correct maps, bring all online and all should be great.
    4.       As I stated in the previous fix, make a copy of the networklib.xml file on at least on computer and use that one as your map base. If the map should go awry, you can replace the file after all of the other computers NM services have been stopped and the networklib.xml file has been deleted.
    This looks more complicated than it is and I hope this helps.
    John.h2h, two things that you may want to look at, I use a Brother laser printer for a network printer. The port address changed for whatever reason on my system. I had to open the printer properties on each computer and change the IP address to the correct one and the printer worked fine. Another place to look, and if this is the problem, Network Magic is only following rules. Do you have any DHCP address reserved in your router. I have assigned blockes of IP’s to the different types of hardware. Example, all desktops are assigned from 192.168.1.100 to 192.168.1.109, laptops are from 110 to 129, cameras, network drives and printer are from 130 to 145, and game consoles are from 146 to 149. I know that Netgear has the ability to set these. If you do have it reserved, either delete this in your router or change it. If you reserve the address with the IP and Mac address that you want, make sure that your computer is set to obtain IP address automatically.
    Good luck, denpag

  • HT201412 Restore did not work.The ipad mini says it is disabled, connect to itunes.When connected, it says that it is locked! After Recovery/Restore completed, device still malfunctions. The slide image keeps dancing around the screen.Device types on its

    What if you have a situation where Restore did not work. I do. The ipad mini says it is disabled, connect to itunes. When connected, it says that it is locked! I have tried using Recovery/Restore but after it completed, the ipad mini still malfunctions. It does not allow you to start the device. The slide image keeps dancing around the screen. The opening page keeps changing in size and the keyboard types on its own! What can be done to fix this????????

    Maybe a reset would help, to be followed by trying the recovery again.
    To reset, hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.  Then do the recovery.
    If this doesn't solve it, I recommend visiting an Authorized Apple Service Center.

  • How to Change default format type in output device

    Hi all,
    I want to change the default format type from X_65_80 to another for all users.
    Can anyone tell me the process.
    Platform: SAP ECC 5.0 + Oracle 9.2.0.7 + HP UX
    Thanks in advance
    Regards
    Eshwar

    Hi Sam,
    Thanks for the reply.
    Where can I select the required format type as default for all reports.
    I have checked in SPAD -> Extended Admin -> Device Types -> Format Types. But I did not find any option to set the format type as default for all reports for all users.
    Regards
    Eshwar

  • HT1911 Why does the Apple ID password on my iPhone never work on my iMac desktop? I have to keep changing them when I login back and forth. Why can't it recognize on either device?

    It seems that every time I login on my iPhone to buy iTunes, it doesn't recognize my password and I have to change it. Then when I go to iTunes to synch, it says my password which I created on the SAME APPLE ID is invalid and I have to change it. I tried to change it to the same password each time, but still it was not recognized by the other device.  Is it because I'm not on Lion or Mountain Lion? (although I seem to remember this problem happening before there was iCloud)
    Thanks for any help.
    Therese X.

    Hi skippy2012trev,
    Welcome to the Apple Support Communities!
    I understand that you updated your Apple Id and password but now you are being prompted for the old information in iCloud. You are on the right track by changing the Apple ID back to the previous email address temporarily so that you can sign out. You should not need to verify the email address. After you edit the Apple ID back to the old email address and then sign out of iCloud on your iPhone, edit the Apple ID back to the address you would currently like to use. There is no need to change the password again, only the email address, unless you prefer to update the password again.
    If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
    Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't help, try these steps:
    Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
    Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
    Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
    Enter the password for your previous Apple ID.
    Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    Return to Settings > iCloud and sign in with your new Apple ID.
    Cheers,
    Joe

  • Is there any way to turn off the auto formatting in Pages?  I just want to type a letter and add pictures and titles, and Pages keeps changing font sizes and doesn't let me "Do it my way".  I HATE this!

    Is there any way to turn off the auto formatting in Pages?  I'm using a blank document, so I figured I could write my letter and add pictures any way I wanted to.  But NO!  Pages keeps changing the font size!  I typed a large heading as a title, and when I try to change to a smaller font for the body of the letter, it changes the size back to the larger size!  I am getting SO FRUSTRATED!  I've spent over an hour trying to get the stupid program to let me just type my letter!  Can anyone help?

    The only one left is the "unsubmitted text" dialogue, which would not be a problem if I were not a Facebook user; after updating the "Richard is..." field (which does not require a manual submit to actually send) I get the above message. This is obviously Safari just not realising that the info has been sent and is therefore (I imagine) one for Apple themselves to answer!!
    You're welcome Rich. Glad to help.
    Not being a Facebook User, I'm not sure how to respond to the error situation. However, this would be something to report to Apple as a bug via the Safari Menu. First, open to the page in question, then select "Report Bugs to Apple".
    Mahalo for the and Aloha from Big Island.

Maybe you are looking for