Ken Burns Affect does not work....

Ok, these are the steps that I'm taking to work with my photos. I import them and wait untill they render, and once they are finished rendering I move them down to the timeline. I then press the tab for pictures and it gives me the button for ken burns affect, but when I adjust what I want done then I press the button to render it does it but it does not apply the affect. What should I do? Reinstall? Thanks.

atxguy,
Before you use the Ken Burns effect are you selecting the clip you wish it applied to?
Highlighted clips will turn blue.
Matt

Similar Messages

Imovie 10.0.1- Ken Burns effect do not work

imovie 10.0.1- Ken Burns effect do not work

Is the photo you're trying to apply the Ken Burns effect to in a Project? It won't work if it's just in an Event.
More details here:
http://help.apple.com/imovie/mac/10.0/#movc6e02f503
http://help.apple.com/imovie/mac/10.0/#mov26d3f6a6c
Matt

Burned DVD does not work in all players

Hi all,
I am quite new to authoring my own DVDs, but since I married more or less recently I thought it is a nice idea to author a DVD with our wedding pictures for family and friends. So I spent enough time in iDVD selecting themes, slide shows, music etc. Finally a previewed everything and - yeah - happy.
So I wrote a disk image and burned this using the apple disk tool. So far so good. Mounting the newly recorded DVD workes perfect and the DVD player app works like no charm. Every menu, sound - as I want it.
Happy, running down to the living room and try it in the stand alone DVD player (Sony HD recorder) and - big disappointment. DVD runs, first menu pops up, and the slide show starts. But after the end, it does not return to the menu, it just keeps looping the slideshow. To make it even worse, the menu button on the remote just restarts the slideshow. What the f... is wrong?
Is there something I can to / configure to make it work correctly?
Any help is appreciated.
Thanks & Cheers,
Daniel

Daniel,
On your mac, open the disc image with apple's dvd player application. Assuming it plays exactly as expected and there are no issues with scene selections, buttons, etc.
Now you can use apple's disc utility (or Roxio Toast) to burn it to dvd-r. I recommend Verbatim, Taiyo Yuden, or Maxell for best results. Do not exceed 4x burn speed.
Let's say you get this far and the burned dvd plays perfectly on your mac. Now it's time to try it out on a set top dvd player. Sony makes some fantastic dvd players but I would try other players as well. Best place to do this is at a store that sells dvd players like Fry's Electronics, Best Buy, Walmart, or whatever stores are available in your own area.
Hand the dvd you created to a salesperson at one of these stores and ask the him/her to help you test drive a variety of set top dvd players to see which ones accept the dvd in question. My guess is that it will work fine on most of these players but if not just come on back for more help.
Message was edited by: SDMacuser

"Burn" button does not work

I'm trying to burn an iDVD project to DVD. Movie is exported from iMovie. When I click on "burn," nothing happens. The button icon does not react. Any idea what's going wrong?

It seems to me you used to have to hit the burn button twice. Have you tried twice?

Satellite P105 mat****a dvd drive does not work with Win 7

Greetings,
I need an upgrade on my dvd for my vintage Satellite P105.
I want the fastest dvd burner possible at this time because I am a movie fan and keep them in digital storage.
1) First should I go get an external drive or can I get top performance with an internal dvd replacement from a parts dealer or Toshiba?
The problem is when I upgraded to windows 7 things changed. I lost my sound but solved that by using a legacy driver for Visa as apparently the sound "board" on the laptop is made for only Vista. Next I found the dvd drive which is a mitsu****a UJ-450s internal does not work or is extremely slow in backing up movies from discs or files. The available burner software also seems intended for Vista as performance was acceptable then. Even the dvd burner software does not work.
2) So, my question to the mavens of multimedia is: What should be my next move?
3) Should I go external and face the USB bottle neck or
4) go for the bus speed on the internal dvd?
5) Given that an internal dvd is better as it is exactly a dvd-ram/IDE as it currently is, or some other bus configuration.
6) Most importantly, what dvd burner would give me 18x speed with current software like ConvertXtoDVD and fit as an external or -- better -- as an internal dvd replacement or my slow drive currently?
Of course, if you could give me a model number and direct me to sales it would be much appreciated.
Thank you all in advance.
Rachel_1

1) First should I go get an external drive or can I get top performance with an internal dvd replacement from a parts dealer or Toshiba?
You should know that not all internal ODD>>>>>>>>>>>>>>>>>>>>>ODD?>>>>>>>>>> devices are compatible. You will need to use an compatible and supported ne and such device could be ordered from an local ASP.>>>>>>>>>>>>>>>>>ASP?>>>>>>>>>>>>>>>>>>>>>>>>> >>
But its more expensive as an external CD/DVD device therefore you could also choose an external one which would be compatible with all possible notebooks and computers.
Makes sense
2) So, my question to the mavens of multimedia is: What should be my next move?
As mentioned. Good option would be to buy an external ODD burner>>>>>>>>>>>>>>>>>>Okay>>>>>>>>>>>>>>>>>>>
3) Should I go external and face the USB bottle neck or
External device are compatible with all computers and are cheaper>>>>>>>>>>>>>>>>>yes, but isn't the data thru put slower with an external via USB or should I get firewire?>>>>>>>>>>>
4) go for the bus speed on the internal dvd?
If you have the money for an internal device and want to use it only with P105 then you can choose also an internal burner.>>>>>>>>>>>>they are $96 here at toshiba site>>>>>>>>>>>>
e
5) Given that an internal dvd is better as it is exactly a dvd-ram/IDE as it currently is, or some other bus configuration.
As far as I know its an IDE interface but the device would support master or slave or c-sel>>>>>>>>>>>>>>>>>>>what is c-sel????>>>>>>>>>>>>> settings. As mentioned, you have to buy an Toshiba recommended one.>>>>>>>>>>>>>the one sold here would be recommended, would they not?>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
6) Most importantly, what dvd burner would give me 18x speed with current software like ConvertXtoDVD and fit as an external or -- better -- as an internal dvd replacement or my slow drive currently?
Look point 5)>>>>>>>>>>>>>>>>so you agree that a bus connection is superior to a USB then?>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Thank you for your prompt reply. Could you comment on my questions add to your message?
Rachel

Pioneer Blue ray burner does not work in a Mavericks.

MY Pioneer Blu Ray burner BRD-RW 206D does not work and I get this message (The disc can’t be used because the disc drive is not supported (error code 0x80020025). I have the last firm ware update in it. It worked fine in Mountain Lion but not in Mavericks.

Hi, everyone
just wanted to report I've been successfully using my Pioneer BDR-208D for a couple of days now with no further problems.
I power-cycled and put to sleep the MacPro a few times, and burned a few DVDs and a couple of BD-RE disks.
So, to summarize my experience:
Pioneer BDR-208DBK in second (lower) bay
Mavericks on Mac Pro (early 2008)
Superdrive in upper bay
Drive not appearing in eject menu button, alt-eject on keyboard
dialog pop-up: "The disc can’t be used because the disc drive is not supported (error code 0x80020025)".
What I did:
Booted back into Lion
Inserted non-blank media in the BD drive (a CD in my case)
Rebooted into Mavericks with the CD still inside the drive
System found the drive and enable eject both on keyboard and menu
Disabled "Put hard disks to sleep..." in Energy Saver prefpane - this is what I believe stopped the seemingly random disappearing of the drive
Hope this helps...

Disk burning device of my macbook pro does not work

hi
the disk burning device of my macbook pro does not work from last night!!
it don't eject and don't pick CD!!! it is off!!!!!
in my macbook pro info see this messege:No disc burning device was found. If the device is external, make sure it’s connected and turned on.
I reset my System management Controller:http://support.apple.com/kb/HT3964 But it don't right!!!!
and i can not go to a apple support!!!! i'm in dubai!!!!! is here an apple support???
it don't have any other way to solve this problem???????

Try doing a Parameter RAM reset - hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys.
If the hardware has filed there's nothing anyone here can do to help you ...

Ken Burns affect driving me crazy.

Every still picture I import has the Ken Burns affect. I highlight all the stills and even after changing the preferences to 'fit', I still get the ken burns affect on all my stills.
Shouldn't the default be 'fit' instead of Ken Burns? Especially since you can't turn the Ken Burns affect off for a set of pics . . . even though through preferences, it should work. What is the solution?

Hi Geysser,
Yes, the default for new pictures added to a project is the KB effect. In project preferences you can change this to "Fit" or "Crop" for each project, as you've already seen. After changing it, the new effect will only be applied to all newly added stills but not to the ones that were already in the project.
However, it's fast and easy to change the effect on a batch of stills by using copy-paste:
Select a clip that has your desired effect and press cmd-c (or choose Edit/Copy). Now select all the clips that you want to apply that effect to and press option-cmd-R (or choose Edit/Paste adjustments/Crop).
The +Copy/Paste adjustments+ option works great for other stuff, too (like applying audio settings or video effects to a bunch of clips).

My cover flow does not work on my 3rd gen 64 gb ipod touch

My cover flow does not work on my 3rd gen 64 gb ipod touch and neither does shake to shuffle.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT6337 HandOff feature does NOT work

HandOff feature does NOT work on my iPhone6 and iPad Air.
I have the latest updates (iOS 8.1) installed and my MBP is on Yosemite 10.10...
I have my iPad Air, iPhone6, and MBP on the same network.
And, I have bluetooth enabled.
Yet, I don't see the handOff icon appear on any of my mobile devices...
Am I missing something??
Does setting a password on all my devices affect this feature?

Hello LoreZyra,
Thanks for using Apple Support Communities.
To get Handoff working between your devices, please take a look at the article below for settings needed to be configured on your devices.
Check your settings
Check the following settings on your iPhone, iPad, or iPod touch:
Go to Settings > Wi-Fi and turn on Wi-Fi if necessary.
Make sure your iOS devices are connected to the same Wi-Fi network by going to Settings > Wi-Fi and comparing the name of the network each is on.
Go to Settings > Bluetooth and turn on Bluetooth if necessary.
Go to Settings > General > Handoff & Suggested Apps and make sure Handoff is on.
Go to Settings > Phone. If you seeWi-Fi Calling, turn it off.
Check the following settings on your Mac:
Go to the Wi-Fi icon at the top of your screen and turn on Wi-Fi if necessary.
Make sure your Mac and iOS devices are connected to the same Wi-Fi network. Go to Settings > Wi-Fi on your iOS device and compare the name of the network with the Wi-Fi network on your Mac.
Go to the Bluetooth icon at the top of your screen and turn on Bluetooth if necessary.
In System Preferences > General, select “Allow Handoff between this Mac and your iCloud devices.” If you don't see this setting, your Mac may not support Handoff.
Open the FaceTime app, go to FaceTime > Preferences and turn on “iPhone Cellular Calls.”
Go to System Preferences, and sign out and then sign in again to your iCloud account.
Get help using Continuity with iOS 8 and OS X Yosemite
Take care,
Alex H.

Home Sharing does not work. It's time for Apple to act.

My specific question: Does anyone from Apple read these discussions *and* use the information to fix iTunes?
My issue (and I've given up on this): Home Sharing does not work and it needs to be fixed. I use a Windows 7 based PC and can successfully access my iTunes library from my iPad, meaning all network requirements are met. However many artists and albums do not appear. I know this is not about the tagging/data for the albums.
I found recommendations in these forums regarding the iTunes database (.itl), that this is a sign that the database is corrupted, and how to re-create it from the xml version. I used this technique and it did fix the problem - all albums and artists appeared. But within a day or so, they disappear again, meaning the .itl file is corrupted again and has to be re-created again. Also - if the .itl file is corrupted, then why does everything appear fine in iTunes? Somewhere, somehow the data are good enough to make iTunes work properly.
Bottom line: If you can't get the basics right, then Home Sharing does not work. Some very helpful forum commenters said it could have something to do with the anti-virus software, but that is just passing the buck. I should not have to know how to do all this. I should be able to turn on Home Sharing and enjoy the music from my iPads, iPhone, etc. Imagine you have to know how fuel injection works and be able to fix it every two days just to use your car - you should be able to turn the key and drive.
There are more problems - I won't even get into how the album won't display properly on the iPad and other annoyances.
Apple? Are you listening? Home Sharing does not work. It is the opposite of the image projected of easy-to-use, people-friendly products.
I suggest you either make it work or turn off the feature.
Joe

If your database is constantly becoming corrupt, you have a problem on your computer, it is nothing to do with homesharing. The corrupt database does not affect iTunes because that uses another file. It's not passing the buck, by considering whether anti-virus software might be causing this, this is the sort of stuff anti-virus software does (although I'm not saying that's what it is in your case-I don't know at this stage), you can't hold Apple accountable for badly written software that you have put on your computer yourself.
If you can't correctly identify what is causing your problem, you are never going to fix it.

Flash Player 10 does not work in IE or Firefox. What could it conflict with?

I'm using Firefox 3.6.8 (and sometimes IE 8.0.6001.18702IC) on Windows XP Pro, SP 3.
For some weeks now, I have been unable to hear any sounds on anything Flash-based, from YouTube to games at MSN.com or embedded videos on any site using Flash. Initially I had assumed it to be because of having QuickTime installed because I know QT likes to hijack everything. I uninstalled QT (and Real Player) and Flash Player then reinstalled Flash Player (and Shockwave Player just in case) and guess what?
Yup. Nothing. When I uninstalled everything, I used a program called Revo Uninstaller, which includes a registry cleaning option. I then used Abexo and WinASO's registry cleaners to make sure I got everything else that even looked like QuickTime off my hard drive.
When I reinstalled Flash, the following programs appeared in C:\Windows\system 32\Macromed\Flash:
Flash 10i.ocx (10.1.82.76)
FlashUtil10i_ActiveX (10.1.82.76)
FlashUntil10i_Plugin (10.1.82.76)
genuinst (6.0.2800.1531)
FlashUtil10i_ActiveX.dll (10.1.82.76)
NPSWF32.dll (10.1.82.76)
KB931433
FlashInstall
Install
Flashplayer.xpt
When I check IE's "Tools" and look for add-ons, it says that Flash (Shockwave Flash) is enabled. I even enabled the other Adobe add-ons for Acrobat and such just to be sure. Firefox shows Shockwave Flash and Shockwave for Director both to be enabled. The Flash control panel settings don't help: I have all sites set to store about 100 KB on my computer to make sure there's enough room for everything but still nothing.
Before anyone asks, my audio drivers are up to date, thanks to the manufacturer's website. I have DirectX 9.0c installed and everything else works fine. I can play audio and video elsewhere with no problems. It's only Flash that's showing me this trouble and there's no hint as to what else could be interfering with Flash.
Any ideas?

Well, great. I tried the uninstall/reinstall before, but not with the uninstaller, so I was hopeful that this time might do it. No such luck. The video still plays, but no sound.
All the sound settings are working with everything else from games to media players. I set Windows' firewall to allow both the ActiveX and plugin for Flash, just in case.
In the Flash folder, I now have:
Flash10l.ocx (10.1.102.64)
Flash Util10l_ActiveX (10.1.102.64)
FlashUtil10l_Plugin (10.1.102.64)
Genuinst (6.0.2800.1531)
FlashUtil10l_ActiveX.dll (10.1.102.64)
NPSWF32.dll (10.1.102.64)
And the setup and text files that went with 'em.
I've also done a system restart since then and zip.
I went through IE and Firefox and looked for any file associations (like .flv) that I could manually change over to using Flash, but no go. The settings panels for Flash have all been set to allow YouTube specifically (as a test) and to allow 10KB of storage space for all affected sites.
Now what? I'm really not looking forward to a reformat and reinstall, but it's looking like that's what it's going to take.
Date: Sun, 14 Nov 2010 17:37:07 -0700
From: [email protected]
To: [email protected]
Subject: Flash Player 10 does not work in IE or Firefox. What could it conflict with?
Something is strange with your list of modules; you list FlashUntil10i_Plugin (10.1.102.64), but this is really 10.1.85.3
I recommend that you uninstall Flash Player completely (using http://kb2.adobe.com/cps/141/tn_14157.html), then restart Windows, and delete all remaining files in C:\Windows\system32\Macromed\Flash.
Next reinstall both ActiveX (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and the plugin (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe).
After that, if the problem persists, have a look at this page http://kb2.adobe.com/cps/837/cpsid_83739.html
>

HT1414 touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod

touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod, can anyone help or what is the cause

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

My weather forecast does not work!

My weather forecast does not work, the animation background catching this.
This equals the image of the print, it does not move.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Ken Burns Affect does not work....

Similar Messages

Maybe you are looking for