Key tab does not work on solaris
Hi,
I have installed my new dev environment , a solaris 10 system.
Unfortunatly, when I launch my production java applications, some control key does not seem to work. Particularly the tab key, so i cannot change from one JTextField to another. But this behaviour does not occur when the same application is launched on windows, linux or freebsd.
Can anyone help me ?
Thanks, alan!
I believe what you found is right! I hard coded the size (60) in vswprintf and It works!
I cannot pass the size ( 60 ) to ksx_swprintf, I need to find a way to compute the bufr size ( not by sizeof(bufr)) inside ksx_swprintf before calling vswprintf.
What I am doing here is to i18n a big system to a few unix platforms. Of course, you know there are many calls of sprintf() in the code base, it is impossible to manually change all the sprintfs. what I did so far is to replace all sprintf by stprintf, then define macro stprintf to be swprintf for WCS and sprintf to be the SBCS, but on solaris 7, unlike other systems, swprintf takes an argument of buffer size ( as the 2nd argument), so for SOLARIS7, I have to define stprintf to be ksxswprintf. This is where I am.
Thanks for pointing out the error!
CXP
Similar Messages
-
Why does right clinking on link and selecting open in new tab does not work?
Why does right clinking on link and selecting open in new tab does not work?
It opens up a blank page. The only way to make the link work is to click on the navigation bar in the new tab and press enter to reload the link.Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. <br />
2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18
The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons -
D-Link 562M modem does not works in Solaris 10 (?)
I use D-Link 562M external USB 56K modem. Modem works in Windows but does not works in Solaris 10 (?). Help me!
pat.gibbons wrote:
Not supported yet but will be in a future Solaris Express release.Many USB modems are not really modems but the entire signal processing is done by the host computer. Such "winmodems" require signal processing software which is quite complex. I do not think that such modems are supported in the following versions of Solaris.
If the 562M is NOT such a modem (but a "real" one) it should be quite easy to adapt a driver to work with this modem.
Martin -
front page opens works shortly freezes.
only yellow green buttons work. I click yellow to minimize normal top bar menu appears I choose new page, opens works normally.
The restart saved tabs does not work on that first page.Hi @prdstudio3 ,
Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP -
The print tab does not work in mapquest
The print tab does not work in mapquest
You are on the right track to getting the printer installed regarding firewall but perhaps it has saved in a different port on your computer than can communicate correctly. Search Devices and Printers on the Windows 8 PC so you can pull up the printers' folder. Do you see the Officejet 6500 in here (meaning have you installed it again)? If you do not see it here, check your Print Server Properties and make sure the driver is not in here either, if so remove it. Restart the Print Spooler. Make sure you uninstall it completely and shut down the PC (see video link on how to uninstall HP drivers and restart the print spooler in Windows 8 if needed).
Remember to re-install the Full Feature Software and Drivers (for your OS and region) when the PC reboots. Try the test print and if it does not print:
1. Right-click on it and select Printer Properties.
2. Under the Ports tab make sure you see the printer's IP address here or a serial number. Sometimes the HP network -rediscovery ports can be tricky.
3. When the printer is high-lighted in this window, click Add Port.
4. Select Standard TCP/IP and follow the rest of the prompts in the Wizard to enter in the printer's current IP address.
5. Try to print.
If this does not help you, you may have other computer problems.
Have you ever installed a printer on this PC before?
What is the name of the anti-virus software you use?
Are you on a server, proxy, or other elaborate wireless setup?
Answer those questions for me please if the above information does not help you. I will do my best to assist.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution! -
"Open a new tab" does not work, nor does File/New Tab
This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
Your system details show that toolbar in the user agent as AskTbWCL2/3.12.2.16749
See:
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Hello, I purchased design premium 4.0 German Windows (LIZ 390232 from 22.02.2010) from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not disable the product key. He loaded it, but only in Englisch (trial version?) Please help me for the next step. I have the license agreement in my hand.
Moving this discussion to the Downloading, Installing, Setting Up forum.
Jakobh53157856 before you begin the installation process please complete the transfer of license process to transfer the Adobe Creative software license you wish to utilize to your possession, You can find details regarding the transfer process at Transfer an Adobe product license. -
I purchased design premium 4.0 German Windows from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not disable the product key. He loaded it, but only in Englisch (trial version?) Please help me for the next step. I have the license agreement in my hand.
Nobody here can help you with this. You'll need to contact Adobe directly.
Did your friend fill out and send in the license transfer form?
Transfer an Adobe product license -
Hotkey "Strg + Tab" does not work anymore.
Hello everyone. I am having a problem with my browsing experience and was unable to find a solution.
Using the hotkey "Strg + Tab" does not change between Tabs anymore as it should do. I do not recall having changed anything with my browser, keyboard or general PC setup.
The alternate hotkey "Strg + PgDown" still works as intended. So do the hotkeys "Strg + PgUp" and "Strg + Shift + Tab" to change between Tabs in the opposite direction. The latter also confirms that my keyboard is functional and Firefox does receive the input.
I tried updating to a newer version, but apparently I am already running the most current version, which is 32.0.3 at the moment.
Thanks in advance for any helpful comments.Are you using the en-US Firefox version or another locale?
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
Safari (OSX 10.9) new tab does not work
I opened Safari after the Mavericks upgrade and, initially, it looked fine. Now when I open it, it does not work. I press command-T and a new tab does not appear; I press command-N and a new window does not appear. If I quit Safari and reopen it, the tabs show up. So the UI is not reflecting the input. I've removed all non-Apple internet plug-ins and I've removed all extensions, moved all plists to my desktop and I still have this behavior.
OK, so apple support had me reset my SMC amd PRAM. In resetting PRAM, I was able to run Disk Utility and repair permissions too. And it worked. Tabs and new windows show up and it's all responsive.
-
CuciLync 9.2 - registry key configuration does not work as expected
Hi,
according to the Administration Guide for CuciLync 9.2.2 some registry keys are supported to configure the client.
In the chapter 'Phone Parameters' there is a statement that four registry keys are supported:
CcmcipServer1
CcmcipServer2
TftpServer1
TftpServer2
In the next chapter 'CTI Load Balancing' there is an explanation that the registry key UseCUCMGroupForCti is also supported.
=> Does that mean that five registry keys are supported and not only four ?
My next questions leads to the possible values for these registry keys.
With CuciLync 8.6 it was possible to leave the registry keys for CcmcipServer empty.
In this case the IP addresses for CcmcipServer were automatically defined by downloading the config file.
And with UseCUCMGroupForCti these IP addresses were 'copied' to CtiServer.
That means with CuciLync 8.6 there was need to define CcmcipServer and CtiServer.
Only the TftpServers were configured by registry keys.
=> Is this also supported with CuciLync 9.2 ?
=> If no: In which future version do you plan to implement this ?
=> If yes: Are there any extra settings needed ? Because it does not work at the moment
Thanks for your feedback
Best Regards
Carsten Lucy
(Bayer Business Services)According to MSDN:
When caching is enabled, the module caches the service information data until it polls the Service Control
Manager and discovers that the data has changed. If changed, the module updates the cached data and returns it as output. You can disable this caching feature, but doing so will cause the module to return data at every polling interval instead of only returning
when the data has changed or when the polling interval count has reached a multiple of 10.
However, the configuration is DisableCaching, and the default is False. Go figure that one out. Gotta
love Microsoft configuration names and documentation! If true, then it's not disable..... :)
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com) -
I am the administrator and the key does not work,nor the registry key .
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers, Tom -
E7 lock key switch does not work
Lock key stopped working during some update today. I installed the phone from scratch and installed anna over previous os.
At sometime on the proces lock key stopped working. It does not work neither as led torch switch.
I have found no place to change this key behaviour.Hey Mann,
In order to reslove your issue I would suggest performing a soft reset (*#7780# soft reset(security code needed; 12345 by default) and then re-install anna again, should this not work you should consider taking your device to your local Nokia Care Point
Thanks,
Whizzkid -
Java.io.File renameTo does not work on Solaris
Hi Experts,
I have a code-piece which tries to move files from one directory to another on the SAME FILE SYSTEM using java.io.File.renameTo method.
It works fine when there less no. of files in the source directory. But the renameTo does not work as expected when there are very huge no. of files(~40K) present in the source directory.
I am aware that there is a known issue when one tries to use this method to move files across file systems OR if the file exists at the destination directory.
But in my case the file system is the same and the there is no such file in the destination directory.
I suspect some inode related issues. But not sure what it is exactly.
Is there any limitations of renameTo?
Please help.OK, we all now understand you have a problem in doing this, but without the specifics of the problem that you are experiencing, then it is fairly difficult to give you anything other than a guess. If you would like some specific and relevent answers, please supply specifics about how exactly the operation differs from your expected results. You should also post example code as it is almost always asked for eventually.
Maybe you are looking for
-
How can I paste an AP Group into a WLC so I don't have to do it by hand?
I'm creating a new AP group across a WiSM farm. All WiSMs will get the same AP Group. Problem is, the interfaces were created with spaces, such as "vlan 90". Other interfaces, created with names, such as "MyWLAN" will paste in. (controller) >config
-
Unable to see columns of Data Model in Template Builder for Word.
Experts, My customer has defined Data Model, and when Ct is trying to insert fields into their documents, the columns in the Data Model can't been seen in Template Builder for Word. (in tool bar; Oracle BI Publisher > Insert > Field) The details is a
-
MacBook Pro to MacBook Pro File Transfer
Perhaps too basic of a question, but I haven't been able to find the answer elsewhere. I'm getting a new MacBook Pro in a couple of weeks and need to transfer non-application files from my old (early 2011) MacBook Pro to the new one. In the previous
-
How to display appcmd /config xml data into a single table
Hi, I extracted my IIS sites using appcmd appcmd /site /config /xml > c:\temp\iisconfig.xml afterwhich I would like to grab the data from this xml and export into excel file [xml]$iisconfig = get-content c:\temp\iisconfig.xml I would like to get the
-
Hi, I want to create some new transactions to use for Impairment (unplanned depreciation) and depreciation write back. How can be sure of which GL accounts will be selected from the account assignments in AO90 for each transaction i create. Thanks