Keyboard nav_Flash MX 2004

Hello,
I've been trying to get the keyboard navigation to work with
no success. What I want is for users (especially visually impaired)
to be able to navigate using right and left buttons to progress
through a slide show using Flash MX 2004.
These are the instructions I've followed to the letter--what
am I doing wrong?!
1. Create an invisible button.
2. Place button instance on stage.
3. Select the instance and open the actions panel.
4. In the Actions panel, enter on(keyPress "<Right>"){
nextFrame();
This is from Chun and Garraffo's Macromedia Flash Advanced
book. It's not an issue of formatting since much of the script is
available from the drop-down menus in the Action script panel.
Any help would be GREATLY appreciated since I've been
struggling with this for weeks (searched many sites, tried many
other scripts, etc.).
Thanks!
Natasha

I don't know about your sample code. But, try this.
var keyListener
bject = new Object();
keyListener.onKeyUp = function() {
if(Key.getCode() == Key.RIGHT)
nextFrame();
if(Key.getCode() == Key.LEFT)
gotoAndStop(_currentframe - 1);
Key.addListener(keyListener);

Similar Messages

  • Netra 440 - pci@1e failure msg at OpenBoot Diagnostics

    Hi,
    We have here some problems at a new netra 440. In the OpenBoot Diagnostics we receive the msg:
    WARNING: Device /pci@1e,600000/ide@d being marked with 'status' == fail
    SC Alert: /pci@1e,600000/ide@d fail
    When the OpenBoot Diagnostics are finished solaris starts but only with a few processes.
    the sun docs suggests a ide controller failure. But no actions are given. What can I do. Can this be fixed are should I arrange a replacement?
    The complete boot log:
    Executing Power On Self Test
    0>
    0>@(#) Sun Fire[TM] V440,Netra[TM] 440 POST 4.16.3 2004/11/05 20:05
    /dat/fw/common-source/firmware_re/post/post-build-4.16.3/Fiesta/chalupa/integrated (firmware_re)
    0>Copyright � 2004 Sun Microsystems, Inc. All rights reserved
    SUN PROPRIETARY/CONFIDENTIAL.
    Use is subject to license terms.
    0>OBP->POST Call with %o0=00000800.01014000.
    0>Diag level set to MAX.
    0>Verbosity level set to NORMAL.
    0>Start Selftest.....
    0>CPUs present in system: 0 1 2 3
    0>Test CPU(s)..../ERROR: Timeout on 0 waiting for resource type 2048.
    Done
    0>Interrupt Crosscall....Done
    0>Init Memory..../
    SC Alert: Host System has Reset
    Done
    0>PLL Reset....Done
    0>Init Memory....Done
    0>Test Memory....Done
    0>Test CPU Caches....Done
    0>Functional CPU Tests....Done
    0>IO-Bridge Tests....Done
    0>INFO:
    0> POST Passed all devices.
    0>
    0>POST: Return to OBP.
    SC Alert: Host System has Reset
    Configuring system memory & CPU(s)
    Probing system devices
    Probing memory
    Probing I/O buses
    screen not found.
    keyboard not found.
    Keyboard not present. Using ttya for input and output.
    Probing system devices
    Probing memory
    Probing I/O buses
    Netra 440, No Keyboard
    Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
    OpenBoot 4.16.4, 8192 MB memory installed, Serial #68881000.
    Ethernet address 1:4:b1:c5:25:24, Host ID: 84c42947.
    Running diagnostic script obdiag/normal
    Testing /pci@1f,700000/network@1
    Testing /pci@1e,600000/ide@d
    ERROR : IDE device did not reset, busy bit not set
    DEVICE : /pci@1e,600000/ide@d
    SUBTEST : selftest:reset&check-diag
    MACHINE : Netra 440
    SERIAL# : 68881000
    DATE : 06/07/2006 12:57:28 GMT
    CONTR0LS: diag-level=max test-args=except 3
    Error: /pci@1e,600000/ide@d selftest failed, return code = 1
    Testing /pci@1e,600000/isa@7/flashprom@2,0
    Testing /pci@1e,600000/isa@7/serial@0,2e8
    Testing /pci@1e,600000/isa@7/serial@0,3f8
    Testing /pci@1e,600000/isa@7/rtc@0,70
    Testing /pci@1e,600000/isa@7/i2c@0,320:tests={[email protected],[email protected],[email protected],[email protected]}
    Testing /pci@1e,600000/isa@7/i2c@0,320:tests={[email protected]}
    Testing /pci@1c,600000/network@2
    Testing /pci@1f,700000/scsi@2,1
    Testing /pci@1f,700000/scsi@2
    ERROR: OpenBoot Diagnostics failed.
    ERROR: OpenBoot Diagnostics failed
    WARNING: Device /pci@1e,600000/ide@d already marked with 'status' == fail
    SC Alert: /pci@1e,600000/ide@d fail
    SC Alert: Host System has Reset
    Probing system devices
    Probing memory
    Probing I/O buses
    screen not found.
    keyboard not found.
    Keyboard not present. Using ttya for input and output.
    Probing system devices
    Probing memory
    Probing I/O buses
    Netra 440, No Keyboard
    Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
    OpenBoot 4.16.4, 8192 MB memory installed, Serial #68881000.
    Ethernet address 1:4:b1:c5:25:24, Host ID: 84c42947.
    ERROR: OpenBoot Diagnostics failed
    WARNING: Device /pci@1e,600000/ide@d being marked with 'status' == fail
    SC Alert: /pci@1e,600000/ide@d fail
    Rebooting with command: boot
    Boot device: disk File and args:
    SunOS Release 5.8 Version Generic_117350-34 64-bit
    Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
    WARNING: status 'fail' for '/pci@1e,600000/ide@d'
    Hardware watchdog enabled
    configuring IPv4 interfaces: ce0 ce2 ce3.
    Hostname: 192.168.0.158
    The system is coming up. Please wait.
    checking ufs filesystems
    /dev/rdsk/c0t0d0s5: is logging.
    /dev/rdsk/c0t0d0s6: is logging.
    the processes running on solaris:
    UID PID PPID C STIME TTY TIME CMD
    root 0 0 0 15:00:06 ? 0:04 sched
    root 1 0 0 15:00:06 ? 0:00 /etc/init -
    root 2 0 0 15:00:06 ? 0:00 pageout
    root 3 0 0 15:00:06 ? 0:00 fsflush
    root 78 1 0 15:00:10 ? 0:00 /sbin/sh /sbin/rc2
    root 171 78 0 15:00:12 ? 0:00 /sbin/sh /etc/rc2.d/S73nfs.client start
    root 187 178 0 15:01:13 ? 0:00 in.telnetd
    root 147 1 0 15:00:12 ? 0:00 /usr/sbin/rpcbind
    ipunity 189 187 0 15:01:14 pts/1 0:00 -bash
    root 68 1 0 15:00:09 ? 0:00 /usr/lib/sysevent/syseventd
    root 77 1 0 15:00:10 ? 0:02 /usr/lib/picl/picld
    root 181 1 0 15:00:12 ? 0:00 /usr/lib/nfs/lockd
    root 173 171 0 0:00 <defunct>
    root 172 171 0 0:00 <defunct>
    daemon 182 1 0 15:00:12 ? 0:00 /usr/lib/nfs/statd
    root 175 171 0 15:00:12 ? 0:00 /sbin/sh /sbin/mountall -F nfs
    root 180 179 0 15:00:12 ? 0:00 mount 10.37.206.132:/public/um/ /nas1
    root 179 175 0 15:00:12 ? 0:00 /sbin/mount -a -F nfs
    root 178 1 0 15:00:12 ? 0:00 /usr/sbin/inetd -s
    root 208 178 0 15:24:19 ? 0:00 in.telnetd
    ipunity 210 208 0 15:24:19 pts/2 0:00 -bash
    ipunity 291 210 0 16:12:13 pts/2 0:00 telnet 10.135.57.170
    root 295 189 0 16:18:28 pts/1 0:00 ps -ef
    Regards,
    Edwin de Ruiter

    The only IDE device in that system is your optical drive.
    I noticed that the OBP version is a tiny bit down-rev.
    Did this system come from a Reseller ?
    Or, perhaps, has it been sitting idle at your organization for a few months and just now been unpacked ?
    If sold by Sun, I'd have expected to see the latest 4.17.x firmware.
    Who installed the optical drive, the vendor or your staff ?
    There may just be an incomplete installation of the drive to its IDE backplane.
    Yes, open a service case with Sun's techsupport.
    They'll get it sorted out properly.

  • Cant mount /var at boot

    I am experiencing problem with our v480 server, as ocasionally it fails to boot and gives cant mount /var error and goes into single user mode. (Log file is attached below). Once this happens, it doesnt come back into runlevel 3 until it is completely powered off and on.
    I fixed the (ufs log for / changed state to Error ) message by removing the patch 113073-14 and making / as nologging in /etc/vfstab file. But the problem with not mounting /var still comes up. I am attaching the log file below with the ufslog error message included (which doesnt show up after patch removal).
    I am looking for any suggestions or hints, what would be causing this. Thanks a lot.
    Sun Fire 480R, No Keyboard
    Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
    OpenBoot 4.13.0, 4096 MB memory installed, Serial ##
    Creating CPU memory layout properties.
    Initializing 1MB of memory at addr a0ffb92000 - Initializing 12MB of memory at addr a0ff002000 - Initializing 16MB of memory at addr a0fe002000 - Initializing 4064MB of memory at addr a000000000 \ | / - \ | / - Reading temperature limits from FRUPROMs: CPU0/2 BACKPLANE
    Environmental monitor is ON
    Rebooting with command: boot
    Boot device: disk File and args:
    Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
    FCode UFS Reader 1.12 00/07/17 15:48:16.
    Loading: /platform/SUNW,Sun-Fire-480R/ufsboot
    Loading: /platform/sun4u/ufsboot
    | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ SunOS Release 5.9 Version Generic_117171-12 64-bit
    Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
    Use is subject to license terms.
    | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / WARNING: Cannot create minor node for <JNI,FCR> <jnic146x> <0>
    Can't find clone devinfo node
    jnic146x0: Hba: JNI,FCR Model: FCE-6460-N
    jnic146x0: FCode: Version 3.9 [3505]
    jnic146x0: IRQ: 1 Channel: 1
    jnic146x0: SubVend: 1242 Sub: 6460 Rev: 100 Vend: 1242 Dev: 1460
    jnic146x0: WWNN: 100000017301494A WWPN: 200000017301494A
    jnic146x0: Auto-negotiating link speed
    jnic146x0: Configured as Fabric port
    jnic146x0: JNIC v5.2.1.HIT.M05 (03082100)
    jnic146x0: Copyright(c) 1995-2003 JNI Corp, All Rights Reserved.
    jnic146x0: Link Up: 2Gig
    jnic146x0: Port 010200 (WWN 50060E80004417B1:50060E80004417B1) online.
    jnic146x0: Port 010600 (WWN 50060E80004417B3:50060E80004417B3) online.
    jnic146x0: Network Port FFFC01 (WWN 100000051E341635:20FD00051E341635) available.
    WARNING: Cannot create minor node for <JNI,FCR> <jnic146x> <1>
    Can't find clone devinfo node
    jnic146x1: Hba: JNI,FCR Model: FCE-6460-N
    jnic146x1: FCode: Version 3.9 [3505]
    jnic146x1: IRQ: 1 Channel: 1
    jnic146x1: SubVend: 1242 Sub: 6460 Rev: 100 Vend: 1242 Dev: 1460
    jnic146x1: WWNN: 10000001730146A9 WWPN: 20000001730146A9
    jnic146x1: Auto-negotiating link speed
    jnic146x1: Configured as Fabric port
    jnic146x1: JNIC v5.2.1.HIT.M05 (03082100)
    jnic146x1: Copyright(c) 1995-2003 JNI Corp, All Rights Reserved.
    jnic146x1: Link Up: 2Gig
    jnic146x1: Port 010200 (WWN 50060E80004417B0:50060E80004417B0) online.
    jnic146x1: Port 010600 (WWN 50060E80004417B2:50060E80004417B2) online.
    jnic146x1: Network Port FFFC01 (WWN 100000051E344E7D:20FD00051E344E7D) available.
    jnic146x0: Target0: Port 010200 (WWN 50060E80004417B1:50060E80004417B1) online.
    jnic146x0: Target1: Port 010600 (WWN 50060E80004417B3:50060E80004417B3) online.
    jnic146x1: Target0: Port 010200 (WWN 50060E80004417B0:50060E80004417B0) online.
    jnic146x1: Target1: Port 010600 (WWN 50060E80004417B2:50060E80004417B2) online.
    jnic146x0: Target0: Lun0 present.
    jnic146x1: Target0: Lun0 present.
    jnic146x0: Target0: Lun1 present.
    jnic146x1: Target0: Lun1 present.
    jnic146x0: Target0: Lun2 present.
    jnic146x1: Target0: Lun2 present.
    jnic146x0: Target0: Lun3 present.
    jnic146x1: Target0: Lun3 present.
    jnic146x0: Target0: Lun4 present.
    jnic146x1: Target0: Lun4 present.
    jnic146x0: Target1: Lun0 present.
    jnic146x1: Target1: Lun0 present.
    jnic146x0: Target1: Lun1 present.
    jnic146x1: Target1: Lun1 present.
    jnic146x0: Target1: Lun2 present.
    jnic146x1: Target1: Lun2 present.
    jnic146x0: Target1: Lun3 present.
    jnic146x1: Target1: Lun3 present.
    jnic146x0: Target1: Lun4 present.
    jnic146x1: Target1: Lun4 present.
    WARNING: Error writing ufs log state
    WARNING: ufs log for / changed state to Error
    WARNING: Please umount(1M) / and run fsck(1M)
    VxVM sysboot INFO V-5-2-3390 Starting restore daemon...
    VxVM sysboot INFO V-5-2-3409 starting in boot mode...
    NOTICE: VxVM vxdmp V-5-0-34 added disk array DISKS, datype = Disk
    NOTICE: VxVM vxdmp V-5-0-34 added disk array D6001A6B, datype = HDS9500V
    configuring IPv4 interfaces: ce0 ce1.
    Hostname: beta23
    VxVM INFO V-5-2-3247 starting special volumes ( swapvol rootvol usr var opt )...
    Configuring /dev and /devices
    Configuring the /dev directory (compatibility devices)
    mount: /dev/vx/dsk/bootdg/var is already mounted, /var is busy,
    or the allowable number of mount points has been exceeded
    mount: mount-point /var/run does not exist.
    VxVM vxvm-startup2 INFO V-5-2-503 VxVM general startup...
    Dec 13 22:09:04 vxvm:vxconfigd: V-5-1-1589 enable failed: Error in disk group configuration copies
    Dec 13 22:09:04 vxvm:vxconfigd: Database file not found; transactions are disabled.
    VxVM vxvm-startup2 ERROR V-5-2-3656 Vold is not enabled for transactions
    No volumes started
    INIT: Cannot create /var/adm/utmpx
    INIT: failed write of utmpx entry:" "
    INIT: failed write of utmpx entry:" "
    INIT: SINGLE USER MODE

    Thank you so much for your response.
    This error doesnt occur in all boots, but once it occurs , we have to power off the machine and power back on and machine boots normally into run level 3 without this /var error. otherwise a simple reboot doesnt help and we get the same error.
    Here is the /etc/vfstab file, may be you can suggest further.
    #device device mount FS fsck mount mount
    #to mount to fsck point type pass at boot options
    fd - /dev/fd fd - no -
    /proc - /proc proc - no -
    /dev/vx/dsk/bootdg/swapvol - - swap - no -
    /dev/vx/dsk/bootdg/rootvol /dev/vx/rdsk/bootdg/rootvol / ufs 1 no nologging
    /dev/vx/dsk/bootdg/usr /dev/vx/rdsk/bootdg/usr /usr ufs 1 no -
    /dev/vx/dsk/bootdg/var /dev/vx/rdsk/bootdg/var /var ufs 1 no -
    /dev/vx/dsk/bootdg/opt /dev/vx/rdsk/bootdg/opt /opt ufs 2 yes -
    swap - /tmp tmpfs - yes -
    #/dev/odm added for support of Oracle access to VxFS
    /dev/odm - /dev/odm odm - no -
    #NOTE: volume rootvol (/) encapsulated partition c0t0d0s0
    #NOTE: volume swapvol (swap) encapsulated partition c0t0d0s1
    #NOTE: volume usr (/usr) encapsulated partition c0t0d0s3
    #NOTE: volume var (/var) encapsulated partition c0t0d0s4
    #NOTE: volume opt (/opt) encapsulated partition c0t0d0s5
    /dev/vx/dsk/dxdbdg/u01 /dev/vx/rdsk/dxdbdg/u01 /u01 vxfs - yes suid
    /dev/vx/dsk/dxdbdg/u02 /dev/vx/rdsk/dxdbdg/u02 /u02 vxfs - yes suid
    /dev/vx/dsk/dxdbdg/u04 /dev/vx/rdsk/dxdbdg/u04 /u04 vxfs - yes suid
    /dev/vx/dsk/dxdbdg/u05 /dev/vx/rdsk/dxdbdg/u05 /u05 vxfs - yes suid
    /dev/vx/dsk/dxdbdg/u06 /dev/vx/rdsk/dxdbdg/u06 /u06 vxfs - yes suid
    Thanks again

  • Cpu panic , reboot after mirror

    Hi,
    V440 went into infinate reboot loop, after mirroring with veritas , and a reboot , logged in thru rsc, try to get the console , it shows up with following error messages and reboots ....can any one have any idea, i am also going to open a case w/ sun .meam while any help will be appreciated.
    Thanks,
    susesun
    Sun Fire V440, No Keyboard
    Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
    OpenBoot 4.13.0, 8192 MB memory installed, Serial #61250419.
    Ethernet address 0:3:ba:a6:9b:73, Host ID: 83a69b73.
    Rebooting with command: boot
    Boot device: vx-rootdisk File and args:
    SunOS Release 5.8 Version Generic_117350-22 64-bit
    Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
    WARNING: vxvm:vxdmp: Cannot find device number for </pci@1f,700000/scsi@2/disk@0
    ,0:a>
    e_ddi_get_dev_info: Illegal major device number <-1>NOTICE: vxvm:vxio: Cannot op
    en disk ROOTDISK: kernel error 6
    Cannot mount root on /pseudo/vxio@0:0 fstype ufs
    panic[cpu3]/thread=10408000: vfs_mountroot: cannot mount root
    0000000010407970 genunix:vfs_mountroot+70 (10437400, 0, 0, 104732fa, 80, 14)
    %l0-3: 0000000010437400 000000001043ab20 000000323e000000 0000000010437608
    %l4-7: 0000000000000000 00000000104139e8 00000000000c17bf 00000000000017bf
    0000000010407a20 genunix:main+8c (104101f8, 2000, 10407ec0, 10408030, fff2, 1005
    41a0)
    %l0-3: 0000000000000001 0000000000000001 0000000000000015 0000000000000f69
    %l4-7: 000000001042a1c8 00000000104791b8 00000000000da100 0000000000000100
    skipping system dump - no dump device configured
    rebooting...
    SC Alert: Host System has Reset

    Just curious if you've made any progress on this problem. I have several V880's that panic with the same string on reboots. Usually comes up after several resets, but very strange.
    Only thing that I can think of that may be contributing is we recently updated the qlc drivers with patch:
    111097-17

  • Help troubleshoot this message: message overflow on /dev/log minor #5

    During boot with LOTS of disk LUNs I get this message:
    message overflow on /dev/log minor #5 -- is syslogd(1M) running?
    What is the cause of it?
    My system is Solaris 10 with up to date patches as of Jan 10/06.

    As supporting info that may be helpful, I have a V880 running Solaris 9 (not 10) that is seeing the same issue. This would appear to be a problem that is not limited to just Solaris 10.
    Sun Fire 880, No Keyboard
    Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
    OpenBoot 4.13.0, 4096 MB memory installed, Serial #xxxxxxxxxxxx.
    Ethernet address 0:3:ba:86:3b:dd, Host ID: xxxxxxxx.
    Rebooting with command: boot
    Boot device: /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@w2100000c5085aead,0:a File and args:
    SunOS Release 5.9 Version Generic_118558-19 64-bit
    Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
    Use is subject to license terms.
    message overflow on /dev/log minor #5 -- is syslogd(1M) running?
    My box essentially crashed over the weekend. Not really crashed but I was getting so many of these:
    message overflow on /dev/log minor #6 -- is syslogd(1M) running?
    syslogd: malloc failed: dropping message: Not enough space
    syslogd: malloc failed: dropping message: Not enough space
    syslogd: malloc failed: dropping message: Not enough space
    syslogd: malloc failed: dropping message: Not enough space
    that the box was essentially dead. 10-20 minutes between command outputs.

  • Since my G5 died I was thinking about getting a Mac Mini, but I have a ViewSonic Monitor (from 2004) and a USB keyboard and mouse - I also have the external drive tha downloaded my files on to. Do you think the monitor, keyboard and mouse will work on it?

    Since my G5 died I was thinking about getting a Mac Mini, but I have a ViewSonic Monitor (from 2004) and a USB keyboard and mouse - I also have the external drive that I downloaded my files on to. Do you think the monitor, keyboard and mouse will work on it? Would I have to get a hub so I could use the stuff I already have? Is that viewsonic too old to work on it?
    What else would I need? Please advise...

    Yes for keyboard and mouse.
    The monitor will work if it has an HDMI, VGA ir DVI input. If it only has a VGA input you will need this adopter
    http://store.apple.com/us/browse/home/shop_mac/mac_accessories/cables/cable_choo ser#selected-step1=MINI-DISPLAY-PORT&selected-step2=VGA&step=3

  • I can't get to anything on my 2004 iMac. I put new hard drive in it and bought it without install disk. I can't get to anything because the keyboard or mouse doesn't work. It won't detect either

    I just replaced the hard drive on my iMac g5 and when I turn it on I cant get it to recognize the keyboard or mouse. So obviously I can't get to anything.

    I just replaced the hard drive on my iMac g5 and when I turn it on I cant get it to recognize the keyboard or mouse. So obviously I can't get to anything.

  • Laptop Keyboard doesnot work after grub

    Hello,
    My laptop's keyboard stops working after i select distro from grub menu. I've did huge amount of search but i'm hopeless right now.
    I'm using a usb keyboard and it works fine, my laptop's keyboard also works fine in windows and boot menu.
    I have x86-input-evdev and -keyboard for sure.
    I'm using SLIM+ i3w if you need this!
    What to do and where to go?!
    any way if u need my dmesg here it is:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.10.3-1-ARCH (tobias@testing-i686) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Fri Jul 26 17:13:15 CEST 2013
    [ 0.000000] Disabled fast string operations
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005f68ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000005f690000-0x000000005f699fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000005f69a000-0x000000005f6fffff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000005f700000-0x000000005fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000f0005fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0008000-0x00000000f000bfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] SMBIOS 2.3 present.
    [ 0.000000] DMI: LG Electronics LS75-25JLCE5/HUNTER, BIOS HURFSF07 09/28/2005
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0x5f690 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E3FFF uncachable
    [ 0.000000] E4000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask FC0000000 write-back
    [ 0.000000] 1 base 040000000 mask FE0000000 write-back
    [ 0.000000] 2 base 05F700000 mask FFFF00000 uncachable
    [ 0.000000] 3 base 05F800000 mask FFF800000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] PAT not supported by CPU.
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x00bfffff]
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
    [ 0.000000] [mem 0x37000000-0x373fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
    [ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
    [ 0.000000] [mem 0x00100000-0x003fffff] page 4k
    [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
    [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
    [ 0.000000] BRK [0x00849000, 0x00849fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x37a12000-0x37d00fff]
    [ 0.000000] Allocated new RAMDISK: [mem 0x3750f000-0x377fda6a]
    [ 0.000000] Move RAMDISK from [mem 0x37a12000-0x37d00a6a] to [mem 0x3750f000-0x377fda6a]
    [ 0.000000] ACPI: RSDP 000f65b0 00014 (v00 PTLTD )
    [ 0.000000] ACPI: RSDT 5f690af0 0004C (v01 PTLTD HunterFL 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 5f699e88 00074 (v01 LGE HunterFL 06040000 LGE 0000005F)
    [ 0.000000] ACPI: DSDT 5f691a5d 0842B (v01 LGE HUNTER 06040000 INTL 20030224)
    [ 0.000000] ACPI: FACS 5f6aafc0 00040
    [ 0.000000] ACPI: APIC 5f699efc 00068 (v01 INTEL ALVISO 06040000 LOHR 0000005F)
    [ 0.000000] ACPI: HPET 5f699f64 00038 (v01 INTEL ALVISO 06040000 LOHR 0000005F)
    [ 0.000000] ACPI: MCFG 5f699f9c 0003C (v01 INTEL ALVISO 06040000 LOHR 0000005F)
    [ 0.000000] ACPI: BOOT 5f699fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    [ 0.000000] ACPI: SSDT 5f69182f 0022E (v01 SataRe SataAhci 00001000 INTL 20030224)
    [ 0.000000] ACPI: SSDT 5f69135a 004D5 (v01 LGE HNT_IGFX 00001000 INTL 20030224)
    [ 0.000000] ACPI: SSDT 5f690f15 00277 (v01 PmRef Cpu0Ist 00003000 INTL 20030224)
    [ 0.000000] ACPI: SSDT 5f690d55 001C0 (v01 PmRef Cpu0Cst 00003001 INTL 20030224)
    [ 0.000000] ACPI: SSDT 5f690b3c 00219 (v01 PmRef CpuPm 00003000 INTL 20030224)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 638MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] BRK [0x0084a000, 0x0084afff] PGTABLE
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
    [ 0.000000] HighMem [mem 0x377fe000-0x5f68ffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x5f68ffff]
    [ 0.000000] On node 0 totalpages: 390702
    [ 0.000000] free_area_init_node: node 0, pgdat c06af240, node_mem_map f691f020
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 223230 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 1278 pages used for memmap
    [ 0.000000] HighMem zone: 163474 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    [ 0.000000] e820: [mem 0x60000000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 14 pages/cpu @f68fa000 s33472 r0 d23872 u57344
    [ 0.000000] pcpu-alloc: s33472 r0 d23872 u57344 alloc=14*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 388926
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b68b701a-eb23-4df9-b3c8-ec3497d5f78f ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 3126392 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0005f690)
    [ 0.000000] Memory: 1536040k/1563200k available (4154k kernel code, 26768k reserved, 1734k data, 596k init, 653896k highmem)
    [ 0.000000] virtual kernel memory layout:
    fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc06c1000 - 0xc0756000 ( 596 kB)
    .data : 0xc050e91e - 0xc06c0300 (1734 kB)
    .text : 0xc0100000 - 0xc050e91e (4154 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1862.042 MHz processor
    [ 0.003335] Calibrating delay loop (skipped), value calculated using timer frequency.. 3725.25 BogoMIPS (lpj=6206806)
    [ 0.003339] pid_max: default: 32768 minimum: 301
    [ 0.003390] Security Framework initialized
    [ 0.003401] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003415] Mount-cache hash table entries: 512
    [ 0.003697] Initializing cgroup subsys memory
    [ 0.003710] Initializing cgroup subsys devices
    [ 0.003713] Initializing cgroup subsys freezer
    [ 0.003715] Initializing cgroup subsys net_cls
    [ 0.003718] Initializing cgroup subsys blkio
    [ 0.003751] Disabled fast string operations
    [ 0.003759] mce: CPU supports 5 MCE banks
    [ 0.003768] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003779] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
    Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
    tlb_flushall_shift: 6
    [ 0.010647] ACPI: Core revision 20130328
    [ 0.016690] ACPI: All ACPI Tables successfully acquired
    [ 0.020010] ftrace: allocating 18608 entries in 37 pages
    [ 0.026776] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.027225] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.061246] smpboot: CPU0: Intel(R) Pentium(R) M processor 1.86GHz (fam: 06, model: 0d, stepping: 08)
    [ 0.063333] Performance Events: p6 PMU driver.
    [ 0.063333] ... version: 0
    [ 0.063333] ... bit width: 32
    [ 0.063333] ... generic registers: 2
    [ 0.063333] ... value mask: 00000000ffffffff
    [ 0.063333] ... max period: 000000007fffffff
    [ 0.063333] ... fixed-purpose events: 0
    [ 0.063333] ... event mask: 0000000000000003
    [ 0.076681] Brought up 1 CPUs
    [ 0.076684] smpboot: Total of 1 processors activated (3725.25 BogoMIPS)
    [ 0.077871] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.078028] devtmpfs: initialized
    [ 0.078311] PM: Registering ACPI NVS region [mem 0x5f69a000-0x5f6fffff] (417792 bytes)
    [ 0.079835] RTC time: 0:17:13, date: 08/01/13
    [ 0.079897] NET: Registered protocol family 16
    [ 0.080138] ACPI: bus type PCI registered
    [ 0.080221] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.080225] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.080227] PCI: Using MMCONFIG for extended config space
    [ 0.080229] PCI: Using configuration type 1 for base access
    [ 0.081113] bio: create slab <bio-0> at 0
    [ 0.081231] ACPI: Added _OSI(Module Device)
    [ 0.081234] ACPI: Added _OSI(Processor Device)
    [ 0.081237] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.081239] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.082662] ACPI: EC: Look up EC in DSDT
    [ 0.086937] ACPI: Interpreter enabled
    [ 0.086956] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
    [ 0.086962] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
    [ 0.086980] ACPI: (supports S0 S3 S4 S5)
    [ 0.086983] ACPI: Using IOAPIC for interrupt routing
    [ 0.087016] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.087127] ACPI: No dock devices found.
    [ 0.100886] ACPI: Power Resource [CTHT] (off)
    [ 0.103939] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.104651] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.104655] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.104658] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.104662] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
    [ 0.104665] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
    [ 0.104668] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
    [ 0.104672] acpi PNP0A08:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored)
    [ 0.104675] PCI: root bus 00: using default resources
    [ 0.104777] PCI host bridge to bus 0000:00
    [ 0.104781] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.104785] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.104788] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [ 0.104800] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
    [ 0.104921] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
    [ 0.104933] pci 0000:00:02.0: reg 10: [mem 0xb0080000-0xb00fffff]
    [ 0.104939] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
    [ 0.104946] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
    [ 0.104953] pci 0000:00:02.0: reg 1c: [mem 0xb0040000-0xb007ffff]
    [ 0.105035] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
    [ 0.105045] pci 0000:00:02.1: reg 10: [mem 0x00000000-0x0007ffff]
    [ 0.105212] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
    [ 0.105235] pci 0000:00:1b.0: reg 10: [mem 0xb0000000-0xb0003fff 64bit]
    [ 0.105333] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.105390] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.105451] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
    [ 0.105553] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.105593] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.105654] pci 0000:00:1c.2: [8086:2664] type 01 class 0x060400
    [ 0.105755] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.105803] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.105861] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
    [ 0.105915] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
    [ 0.106742] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.106797] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
    [ 0.106852] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
    [ 0.106930] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [ 0.106985] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
    [ 0.107039] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
    [ 0.107119] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [ 0.107171] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
    [ 0.107225] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
    [ 0.107306] pci 0000:00:1d.3: System wakeup disabled by ACPI
    [ 0.107374] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
    [ 0.107398] pci 0000:00:1d.7: reg 10: [mem 0xb0004000-0xb00043ff]
    [ 0.107497] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.107550] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [ 0.107609] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.107721] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 0.107778] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
    [ 0.107883] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    [ 0.107889] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
    [ 0.107896] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0300-030f
    [ 0.107987] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
    [ 0.108004] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
    [ 0.108016] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
    [ 0.108029] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
    [ 0.108041] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
    [ 0.108053] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
    [ 0.108175] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
    [ 0.108246] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff]
    [ 0.108477] pci 0000:02:00.0: [11ab:4351] type 00 class 0x020000
    [ 0.108510] pci 0000:02:00.0: reg 10: [mem 0xb4000000-0xb4003fff 64bit]
    [ 0.108527] pci 0000:02:00.0: reg 18: [io 0x2000-0x20ff]
    [ 0.108674] pci 0000:02:00.0: supports D1 D2
    [ 0.108677] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.108734] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 0.110062] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.110076] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.110082] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.110087] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xb7ffffff]
    [ 0.110096] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
    [ 0.110182] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.110188] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
    [ 0.110193] pci 0000:00:1c.2: bridge window [mem 0xb8000000-0xbbffffff]
    [ 0.110202] pci 0000:00:1c.2: bridge window [mem 0xd4000000-0xd7ffffff 64bit pref]
    [ 0.110279] pci 0000:06:00.0: [104c:8031] type 02 class 0x060700
    [ 0.110305] pci 0000:06:00.0: reg 10: [mem 0xfedff000-0xfedfffff]
    [ 0.110347] pci 0000:06:00.0: supports D1 D2
    [ 0.110350] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.110429] pci 0000:06:00.2: [104c:8032] type 00 class 0x0c0010
    [ 0.110455] pci 0000:06:00.2: reg 10: [mem 0xbc006000-0xbc0067ff]
    [ 0.110469] pci 0000:06:00.2: reg 14: [mem 0xbc000000-0xbc003fff]
    [ 0.110572] pci 0000:06:00.2: supports D1 D2
    [ 0.110575] pci 0000:06:00.2: PME# supported from D0 D1 D2 D3hot
    [ 0.110654] pci 0000:06:00.3: [104c:8033] type 00 class 0x018000
    [ 0.110680] pci 0000:06:00.3: reg 10: [mem 0xbc004000-0xbc005fff]
    [ 0.110790] pci 0000:06:00.3: supports D1 D2
    [ 0.110793] pci 0000:06:00.3: PME# supported from D0 D1 D2 D3hot
    [ 0.110870] pci 0000:06:00.4: [104c:8034] type 00 class 0x080500
    [ 0.110896] pci 0000:06:00.4: reg 10: [mem 0xbc007000-0xbc0070ff]
    [ 0.110911] pci 0000:06:00.4: reg 14: [mem 0xbc006c00-0xbc006cff]
    [ 0.110925] pci 0000:06:00.4: reg 18: [mem 0xbc006800-0xbc0068ff]
    [ 0.111013] pci 0000:06:00.4: supports D1 D2
    [ 0.111016] pci 0000:06:00.4: PME# supported from D0 D1 D2 D3hot
    [ 0.111098] pci 0000:06:02.0: [8086:4220] type 00 class 0x028000
    [ 0.111124] pci 0000:06:02.0: reg 10: [mem 0xbc008000-0xbc008fff]
    [ 0.111236] pci 0000:06:02.0: PME# supported from D0 D3hot D3cold
    [ 0.111354] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
    [ 0.111362] pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xbc0fffff]
    [ 0.111371] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.111374] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
    [ 0.111379] pci 0000:06:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
    [ 0.111448] pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 06] (conflicts with (null) [bus 06])
    [ 0.111455] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 0a
    [ 0.111459] pci_bus 0000:07: busn_res: can not insert [bus 07-0a] under [bus 06] (conflicts with (null) [bus 06])
    [ 0.111464] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06]
    [ 0.111487] pci_bus 0000:00: on NUMA node 0
    [ 0.111491] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.111495] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.111688] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 7 *10 14 15)
    [ 0.111768] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 7 *11 14 15)
    [ 0.111846] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 *7 10 14 15)
    [ 0.111924] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 *11 14 15)
    [ 0.112001] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 7 10 14 15) *0, disabled.
    [ 0.112082] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 7 11 14 15) *0, disabled.
    [ 0.112159] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 6 7 10 14 15) *0, disabled.
    [ 0.112238] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 7 11 14 15) *10
    [ 0.113690] ACPI: Enabled 3 GPEs in block 00 to 1F
    [ 0.113703] acpi root: \_SB_.PCI0 notify handler is installed
    [ 0.113752] Found 1 acpi root devices
    [ 0.113811] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    [ 0.113894] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.113899] vgaarb: loaded
    [ 0.113901] vgaarb: bridge control possible 0000:00:02.0
    [ 0.113956] PCI: Using ACPI for IRQ routing
    [ 0.123744] PCI: pci_cache_line_size set to 64 bytes
    [ 0.123813] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
    [ 0.123815] e820: reserve RAM buffer [mem 0x5f690000-0x5fffffff]
    [ 0.123948] NetLabel: Initializing
    [ 0.123950] NetLabel: domain hash size = 128
    [ 0.123952] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.123968] NetLabel: unlabeled traffic allowed by default
    [ 0.124001] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.124008] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.124013] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.126058] Switching to clocksource hpet
    [ 0.130773] pnp: PnP ACPI init
    [ 0.130800] ACPI: bus type PNP registered
    [ 0.131416] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.131421] system 00:00: [mem 0xf0000000-0xf0003fff] has been reserved
    [ 0.131425] system 00:00: [mem 0xf0004000-0xf0004fff] has been reserved
    [ 0.131429] system 00:00: [mem 0xf0005000-0xf0005fff] has been reserved
    [ 0.131432] system 00:00: [mem 0xf0008000-0xf000bfff] has been reserved
    [ 0.131436] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
    [ 0.131442] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.131661] pnp 00:01: [dma 4]
    [ 0.131697] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.131737] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.131879] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.131929] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.132035] system 00:05: [io 0x0300-0x030f] has been reserved
    [ 0.132039] system 00:05: [io 0x0800-0x080f] has been reserved
    [ 0.132042] system 00:05: [io 0x1000-0x107f] has been reserved
    [ 0.132046] system 00:05: [io 0x1180-0x11bf] has been reserved
    [ 0.132050] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.132113] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.132390] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.133678] pnp 00:08: [dma 1]
    [ 0.133784] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 0.134099] pnp 00:09: [dma 3]
    [ 0.134174] pnp 00:09: Plug and Play ACPI device, IDs SMCf010 PNP0511 (active)
    [ 0.134235] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.134282] pnp 00:0b: Plug and Play ACPI device, IDs SYN1301 PNP0f13 (active)
    [ 0.134310] pnp: PnP ACPI: found 12 devices
    [ 0.134312] ACPI: bus type PNP unregistered
    [ 0.171975] pci 0000:06:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.171980] pci 0000:06:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.171985] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
    [ 0.171989] pci 0000:06:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    [ 0.171994] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 06] add_size 4000000
    [ 0.172003] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    [ 0.172007] pci 0000:00:1e.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.172014] pci 0000:00:1e.0: BAR 15: assigned [mem 0x60000000-0x63ffffff pref]
    [ 0.172018] pci 0000:00:02.1: BAR 0: assigned [mem 0x64000000-0x6407ffff]
    [ 0.172025] pci 0000:00:1e.0: BAR 13: assigned [io 0x4000-0x4fff]
    [ 0.172029] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.172033] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.172040] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xb7ffffff]
    [ 0.172046] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
    [ 0.172055] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.172059] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
    [ 0.172066] pci 0000:00:1c.2: bridge window [mem 0xb8000000-0xbbffffff]
    [ 0.172072] pci 0000:00:1c.2: bridge window [mem 0xd4000000-0xd7ffffff 64bit pref]
    [ 0.172083] pci 0000:06:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    [ 0.172087] pci 0000:06:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
    [ 0.172090] pci 0000:06:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.172093] pci 0000:06:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.172097] pci 0000:06:00.0: BAR 15: assigned [mem 0x60000000-0x63ffffff pref]
    [ 0.172102] pci 0000:06:00.0: BAR 16: assigned [mem 0x68000000-0x6bffffff]
    [ 0.172105] pci 0000:06:00.0: BAR 13: assigned [io 0x4000-0x40ff]
    [ 0.172108] pci 0000:06:00.0: BAR 14: assigned [io 0x4400-0x44ff]
    [ 0.172112] pci 0000:06:00.0: CardBus bridge to [bus 07-0a]
    [ 0.172115] pci 0000:06:00.0: bridge window [io 0x4000-0x40ff]
    [ 0.172122] pci 0000:06:00.0: bridge window [io 0x4400-0x44ff]
    [ 0.172128] pci 0000:06:00.0: bridge window [mem 0x60000000-0x63ffffff pref]
    [ 0.172135] pci 0000:06:00.0: bridge window [mem 0x68000000-0x6bffffff]
    [ 0.172141] pci 0000:00:1e.0: PCI bridge to [bus 06]
    [ 0.172145] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
    [ 0.172152] pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xbc0fffff]
    [ 0.172158] pci 0000:00:1e.0: bridge window [mem 0x60000000-0x63ffffff pref]
    [ 0.172482] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.172565] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.172568] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.172571] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.172575] pci_bus 0000:02: resource 1 [mem 0xb4000000-0xb7ffffff]
    [ 0.172578] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd3ffffff 64bit pref]
    [ 0.172581] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
    [ 0.172585] pci_bus 0000:04: resource 1 [mem 0xb8000000-0xbbffffff]
    [ 0.172588] pci_bus 0000:04: resource 2 [mem 0xd4000000-0xd7ffffff 64bit pref]
    [ 0.172591] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
    [ 0.172594] pci_bus 0000:06: resource 1 [mem 0xbc000000-0xbc0fffff]
    [ 0.172598] pci_bus 0000:06: resource 2 [mem 0x60000000-0x63ffffff pref]
    [ 0.172601] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
    [ 0.172604] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.172607] pci_bus 0000:07: resource 0 [io 0x4000-0x40ff]
    [ 0.172610] pci_bus 0000:07: resource 1 [io 0x4400-0x44ff]
    [ 0.172613] pci_bus 0000:07: resource 2 [mem 0x60000000-0x63ffffff pref]
    [ 0.172617] pci_bus 0000:07: resource 3 [mem 0x68000000-0x6bffffff]
    [ 0.172672] NET: Registered protocol family 2
    [ 0.172896] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.172951] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.173002] TCP: Hash tables configured (established 8192 bind 8192)
    [ 0.173041] TCP: reno registered
    [ 0.173044] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.173060] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.173150] NET: Registered protocol family 1
    [ 0.173167] pci 0000:00:02.0: Boot video device
    [ 0.174673] PCI: CLS 32 bytes, default 64
    [ 0.174731] Unpacking initramfs...
    [ 0.263828] Freeing initrd memory: 3004k freed
    [ 0.266187] Simple Boot Flag at 0x39 set to 0x1
    [ 0.266287] apm: BIOS not found.
    [ 0.266346] Scanning for low memory corruption every 60 seconds
    [ 0.266796] audit: initializing netlink socket (disabled)
    [ 0.266816] type=2000 audit(1375316232.266:1): initialized
    [ 0.281831] bounce pool size: 64 pages
    [ 0.281845] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.284147] VFS: Disk quotas dquot_6.5.2
    [ 0.284226] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.284495] msgmni has been set to 1728
    [ 0.284769] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.284804] io scheduler noop registered
    [ 0.284806] io scheduler deadline registered
    [ 0.284852] io scheduler cfq registered (default)
    [ 0.284987] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.285087] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
    [ 0.285270] vesafb: mode is 1024x768x32, linelength=4096, pages=0
    [ 0.285273] vesafb: scrolling: redraw
    [ 0.285276] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.285482] vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 3072k, total 3072k
    [ 0.315579] Console: switching to colour frame buffer device 128x48
    [ 0.345515] fb0: VESA VGA frame buffer device
    [ 0.345558] intel_idle: does not run on family 6 model 13
    [ 0.345597] GHES: HEST is not enabled!
    [ 0.345617] isapnp: Scanning for PnP cards...
    [ 0.658543] isapnp: No Plug & Play device found
    [ 0.658601] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.679337] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.680017] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.684556] i8042: Detected active multiplexing controller, rev 1.1
    [ 0.686055] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.686096] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 0.686128] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 0.686159] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 0.686194] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 0.686311] mousedev: PS/2 mouse device common for all mice
    [ 0.686409] rtc_cmos 00:06: RTC can wake from S4
    [ 0.686571] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 0.686605] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.686637] cpuidle: using governor ladder
    [ 0.686639] cpuidle: using governor menu
    [ 0.686687] drop_monitor: Initializing network drop monitor service
    [ 0.686801] TCP: cubic registered
    [ 0.686956] NET: Registered protocol family 10
    [ 0.687187] NET: Registered protocol family 17
    [ 0.687199] Key type dns_resolver registered
    [ 0.687333] Using IPI No-Shortcut mode
    [ 0.687439] PM: Hibernation image not present or could not be loaded.
    [ 0.687450] registered taskstats version 1
    [ 0.687968] Magic number: 9:800:252
    [ 0.687999] pci 0000:00:1d.0: hash matches
    [ 0.688056] rtc_cmos 00:06: setting system clock to 2013-08-01 00:17:13 UTC (1375316233)
    [ 0.688187] Freeing unused kernel memory: 596k freed
    [ 0.688527] Write protecting the kernel text: 4156k
    [ 0.688561] Write protecting the kernel read-only data: 1316k
    [ 0.693760] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.699029] systemd-udevd[38]: starting version 204
    [ 0.749237] ACPI: bus type USB registered
    [ 0.749277] usbcore: registered new interface driver usbfs
    [ 0.749292] usbcore: registered new interface driver hub
    [ 0.753176] usbcore: registered new device driver usb
    [ 0.753809] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.753997] ehci-pci: EHCI PCI platform driver
    [ 0.754224] ehci-pci 0000:00:1d.7: setting latency timer to 64
    [ 0.754238] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [ 0.754248] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [ 0.754268] ehci-pci 0000:00:1d.7: debug port 1
    [ 0.757154] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.761830] sdhci: Secure Digital Host Controller Interface driver
    [ 0.761835] sdhci: Copyright(c) Pierre Ossman
    [ 0.762138] sdhci-pci 0000:06:00.4: SDHCI controller found [104c:8034] (rev 0)
    [ 0.762387] mmc0: SDHCI controller on PCI [0000:06:00.4] using PIO
    [ 0.763154] mmc1: SDHCI controller on PCI [0000:06:00.4] using PIO
    [ 0.763242] mmc2: SDHCI controller on PCI [0000:06:00.4] using PIO
    [ 0.767069] SCSI subsystem initialized
    [ 0.769405] ACPI: bus type ATA registered
    [ 0.769889] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
    [ 0.769918] ehci-pci 0000:00:1d.7: irq 23, io mem 0xb0004000
    [ 0.776689] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.776917] hub 1-0:1.0: USB hub found
    [ 0.776924] hub 1-0:1.0: 8 ports detected
    [ 0.777495] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.777500] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.777510] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.777540] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
    [ 0.777717] hub 2-0:1.0: USB hub found
    [ 0.777722] hub 2-0:1.0: 2 ports detected
    [ 0.777972] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 0.777976] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.777984] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [ 0.778025] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
    [ 0.778188] hub 3-0:1.0: USB hub found
    [ 0.778193] hub 3-0:1.0: 2 ports detected
    [ 0.778441] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 0.778446] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.778453] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [ 0.778492] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
    [ 0.778666] hub 4-0:1.0: USB hub found
    [ 0.778671] hub 4-0:1.0: 2 ports detected
    [ 0.778926] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [ 0.778930] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 0.778938] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [ 0.778966] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
    [ 0.779135] hub 5-0:1.0: USB hub found
    [ 0.779140] hub 5-0:1.0: 2 ports detected
    [ 0.779655] libata version 3.00 loaded.
    [ 0.780086] ata_piix 0000:00:1f.1: version 2.13
    [ 0.780279] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 0.783440] scsi0 : ata_piix
    [ 0.786084] scsi1 : ata_piix
    [ 0.786168] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
    [ 0.786171] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
    [ 0.786694] tifm_core: MMC/SD card detected in socket 0:3
    [ 0.786781] ata2: port disabled--ignoring
    [ 0.823446] firewire_ohci 0000:06:00.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
    [ 0.950540] ata1.00: ATA-7: FUJITSU MHV2080AT PL, 000000A0, max UDMA/100
    [ 0.950544] ata1.00: 156301488 sectors, multi 16: LBA
    [ 0.950557] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4082N, HH02, max UDMA/33
    [ 0.963752] ata1.00: configured for UDMA/100
    [ 0.976914] ata1.01: configured for UDMA/33
    [ 0.979353] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080A 0000 PQ: 0 ANSI: 5
    [ 0.982892] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4082N HH02 PQ: 0 ANSI: 5
    [ 0.986322] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
    [ 0.986396] sd 0:0:0:0: [sda] Write Protect is off
    [ 0.986400] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 0.986430] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.080286] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.080290] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.080606] sr 0:0:1:0: Attached scsi CD-ROM sr0
    [ 1.108366] sda: sda1 < sda5 > sda2 sda3 sda4
    [ 1.109847] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.190025] usb 1-5: new high-speed USB device number 4 using ehci-pci
    [ 1.266683] tsc: Refined TSC clocksource calibration: 1861.999 MHz
    [ 1.266690] Switching to clocksource tsc
    [ 1.317249] usb-storage 1-5:1.0: USB Mass Storage device detected
    [ 1.317314] scsi2 : usb-storage 1-5:1.0
    [ 1.317597] usbcore: registered new interface driver usb-storage
    [ 1.323429] firewire_core 0000:06:00.2: created device fw0: GUID 6600774200e09104, S400
    [ 1.420016] usb 1-6: new high-speed USB device number 5 using ehci-pci
    [ 1.546136] usb-storage 1-6:1.0: USB Mass Storage device detected
    [ 1.546307] scsi3 : usb-storage 1-6:1.0
    [ 1.770014] usb 2-1: new low-speed USB device number 2 using uhci_hcd
    [ 1.949297] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.961728] usbcore: registered new interface driver usbhid
    [ 1.961731] usbhid: USB HID core driver
    [ 2.148459] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.173364] usb 2-2: new low-speed USB device number 3 using uhci_hcd
    [ 2.320861] scsi 2:0:0:0: CD-ROM SONY DVD RW DRU-190A 1.62 PQ: 0 ANSI: 0
    [ 2.323718] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.323862] sr 2:0:0:0: Attached scsi CD-ROM sr1
    [ 2.547488] scsi 3:0:0:0: Direct-Access JetFlash Transcend 8GB 8.07 PQ: 0 ANSI: 2
    [ 2.548846] sd 3:0:0:0: [sdb] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
    [ 2.549467] sd 3:0:0:0: [sdb] Write Protect is off
    [ 2.549470] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
    [ 2.550095] sd 3:0:0:0: [sdb] No Caching mode page present
    [ 2.550415] sd 3:0:0:0: [sdb] Assuming drive cache: write through
    [ 2.554343] sd 3:0:0:0: [sdb] No Caching mode page present
    [ 2.554659] sd 3:0:0:0: [sdb] Assuming drive cache: write through
    [ 2.727731] sdb: sdb1
    [ 2.729968] sd 3:0:0:0: [sdb] No Caching mode page present
    [ 2.730299] sd 3:0:0:0: [sdb] Assuming drive cache: write through
    [ 2.731468] sd 3:0:0:0: [sdb] Attached SCSI removable disk
    [ 3.120230] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.159302] systemd[1]: Set hostname to <ighost>.
    [ 3.828104] systemd[1]: Cannot add dependency job for unit acpid.service, ignoring: Unit acpid.service failed to load: No such file or directory. See system logs and 'systemctl status acpid.service' for details.
    [ 3.828451] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.828515] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.828533] systemd[1]: Starting Remote File Systems.
    [ 3.828551] systemd[1]: Reached target Remote File Systems.
    [ 3.828567] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.828615] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.828630] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.828661] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.828675] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.828705] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.828719] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.828753] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.828772] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.828816] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.828830] systemd[1]: Starting Paths.
    [ 3.828845] systemd[1]: Reached target Paths.
    [ 3.828861] systemd[1]: Starting Journal Socket.
    [ 3.828922] systemd[1]: Listening on Journal Socket.
    [ 3.828942] systemd[1]: Starting Setup Virtual Console...
    [ 3.829541] systemd[1]: Starting Create static device nodes in /dev...
    [ 3.859627] systemd[1]: Starting Apply Kernel Variables...
    [ 3.860503] systemd[1]: Mounting Huge Pages File System...
    [ 3.860890] systemd[1]: Starting Journal Service...
    [ 3.861380] systemd[1]: Started Journal Service.
    [ 3.861499] systemd[1]: Starting udev Kernel Socket.
    [ 3.861542] systemd[1]: Listening on udev Kernel Socket.
    [ 3.861615] systemd[1]: Starting udev Control Socket.
    [ 3.861652] systemd[1]: Listening on udev Control Socket.
    [ 3.861722] systemd[1]: Starting udev Coldplug all Devices...
    [ 3.862166] systemd[1]: Mounting Debug File System...
    [ 3.862572] systemd[1]: Mounting POSIX Message Queue File System...
    [ 3.862944] systemd[1]: Starting Encrypted Volumes.
    [ 3.862964] systemd[1]: Reached target Encrypted Volumes.
    [ 3.863003] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.863164] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.879599] systemd[1]: Started Set Up Additional Binary Formats.
    [ 3.914088] systemd[1]: Starting Load Kernel Modules...
    [ 3.914616] systemd[1]: Expecting device dev-disk-by\x2duuid-9fa4ccc9\x2d879c\x2d42b0\x2d8c42\x2d39ff67b9bf38.device...
    [ 3.914650] systemd[1]: Started File System Check on Root Device.
    [ 3.914670] systemd[1]: Mounting Temporary Directory...
    [ 3.930156] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 3.930608] systemd[1]: Expecting device dev-disk-by\x2duuid-BAA022C6A0228949.device...
    [ 3.930627] systemd[1]: Expecting device dev-disk-by\x2duuid-42143f2b\x2d29c6\x2d4174\x2dab7b\x2dfb1600c601e6.device...
    [ 5.034037] FS-Cache: Loaded
    [ 5.056025] RPC: Registered named UNIX socket transport module.
    [ 5.056030] RPC: Registered udp transport module.
    [ 5.056032] RPC: Registered tcp transport module.
    [ 5.056034] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 5.158185] EXT4-fs (sda5): re-mounted. Opts: data=ordered
    [ 5.291383] systemd-udevd[105]: starting version 204
    [ 5.355353] FS-Cache: Netfs 'nfs' registered for caching
    [ 6.472733] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 6.472878] ACPI: Lid Switch [LID0]
    [ 6.474425] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
    [ 6.474491] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
    [ 6.475351] ACPI: Requesting acpi_cpufreq
    [ 6.475712] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [ 6.475718] ACPI: Power Button [PWRB]
    [ 6.475794] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
    [ 6.475798] ACPI: Sleep Button [SLPB]
    [ 6.477173] ACPI: AC Adapter [AC] (on-line)
    [ 6.524341] tsc: Marking TSC unstable due to TSC halts in idle
    [ 6.525067] ACPI: acpi_idle registered with cpuidle
    [ 6.525459] ACPI: Battery Slot [CMB0] (battery absent)
    [ 6.525775] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 6.525782] ACPI: Power Button [PWRF]
    [ 6.529302] Switching to clocksource hpet
    [ 6.623493] wmi: Mapper loaded
    [ 6.706893] NET: Registered protocol family 23
    [ 6.749372] found SMC SuperIO Chip (devid=0x7a rev=01 base=0x004e): LPC47N227
    [ 6.749400] smsc_superio_flat(): fir: 0x6f8, sir: 0x2f8, dma: 03, irq: 3, mode: 0x0e
    [ 6.749418] smsc_ircc_present(), addr 0x06f8 - no device found!
    [ 6.752284] parport_pc 00:08: reported by Plug and Play ACPI
    [ 6.752364] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
    [ 6.759649] thermal LNXTHERM:00: registered as thermal_zone0
    [ 6.759653] ACPI: Thermal Zone [TZ1] (40 C)
    [ 6.761691] thermal LNXTHERM:01: registered as thermal_zone1
    [ 6.761694] ACPI: Thermal Zone [TZ2] (55 C)
    [ 6.775603] ACPI: Fan [FAN0] (off)
    [ 6.868349] sky2: driver version 1.30
    [ 6.868486] sky2 0000:02:00.0: Yukon-2 FE chip revision 1
    [ 6.868560] sky2 0000:02:00.0: irq 42 for MSI/MSI-X
    [ 6.868879] sky2 0000:02:00.0 eth0: addr 00:e0:91:0f:4a:19
    [ 6.886311] intel_rng: FWH not detected
    [ 7.052962] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
    [ 7.052973] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.052978] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
    [ 7.052983] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.052985] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
    [ 7.052990] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.052992] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 7.106512] Linux agpgart interface v0.103
    [ 7.142882] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
    [ 7.143028] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
    [ 7.144655] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
    [ 7.144970] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
    [ 7.217080] yenta_cardbus 0000:06:00.0: CardBus bridge found [1854:0028]
    [ 7.217106] yenta_cardbus 0000:06:00.0: Using INTVAL to route CSC interrupts to PCI
    [ 7.217109] yenta_cardbus 0000:06:00.0: Routing CardBus interrupts to PCI
    [ 7.217116] yenta_cardbus 0000:06:00.0: TI: mfunc 0x01d01002, devctl 0x64
    [ 7.228515] [drm] Initialized drm 1.1.0 20060810
    [ 7.266001] cfg80211: Calling CRDA to update world regulatory domain
    [ 7.297286] lib80211: common routines for IEEE802.11 drivers
    [ 7.297292] lib80211_crypt: registered algorithm 'NULL'
    [ 7.301107] [drm] Memory usable by graphics device = 256M
    [ 7.301113] checking generic (c0000000 300000) vs hw (c0000000 10000000)
    [ 7.301116] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 7.301141] Console: switching to colour dummy device 80x25
    [ 7.301257] i915 0000:00:02.0: setting latency timer to 64
    [ 7.302295] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 7.302300] [drm] Driver supports precise vblank timestamp query.
    [ 7.302376] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 7.316734] libipw: 802.11 data/management/control stack, git-1.1.13
    [ 7.316737] libipw: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
    [ 7.323825] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
    [ 7.323828] ipw2200: Copyright(c) 2003-2006 Intel Corporation
    [ 7.434003] [drm] initialized overlay support
    [ 7.447402] yenta_cardbus 0000:06:00.0: ISA IRQ mask 0x0cd8, PCI irq 16
    [ 7.447408] yenta_cardbus 0000:06:00.0: Socket status: 30000006
    [ 7.447414] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #06 to #0a
    [ 7.447425] yenta_cardbus 0000:06:00.0: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff]
    [ 7.447429] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff:
    [ 7.448715] excluding 0x4000-0x40ff 0x4400-0x44ff
    [ 7.454021] yenta_cardbus 0000:06:00.0: pcmcia: parent PCI bridge window: [mem 0xbc000000-0xbc0fffff]
    [ 7.454026] pcmcia_socket pcmcia_socket0: cs: memory probe 0xbc000000-0xbc0fffff:
    [ 7.454030] excluding 0xbc000000-0xbc00ffff
    [ 7.454045] yenta_cardbus 0000:06:00.0: pcmcia: parent PCI bridge window: [mem 0x60000000-0x63ffffff pref]
    [ 7.454049] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x63ffffff:
    [ 7.454061] excluding 0x60000000-0x63ffffff
    [ 7.457625] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
    [ 7.726030] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
    [ 7.727184] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7
    [ 7.730133] hid-generic 0003:0518:0001.0002: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-2/input0
    [ 7.730188] a4tech 0003:09DA:000A.0001: input,hidraw1: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0
    [ 7.732273] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input8
    [ 7.732416] hid-generic 0003:0518:0001.0003: input,hidraw2: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-2/input1
    [ 7.797551] ipw2200: Radio Frequency Kill Switch is On:
    Kill switch must be turned off for wireless networking to work.
    [ 7.800799] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
    [ 7.893088] input: PC Speaker as /devices/platform/pcspkr/input/input9
    [ 7.991976] tc1100_wmi: HP Compaq TC1100 Tablet WMI Extras loaded
    [ 8.038907] fbcon: inteldrmfb (fb0) is primary device
    [ 8.048603] ppdev: user-space parallel port driver
    [ 8.059482] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
    [ 8.059630] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 8.083387] Console: switching to colour frame buffer device 128x48
    [ 8.089032] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 8.089037] i915 0000:00:02.0: registered panic notifier
    [ 8.089048] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 8.089555] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    [ 8.110287] systemd-udevd[128]: renamed network interface eth0 to enp2s0
    [ 8.123115] iTCO_vendor_support: vendor-support=0
    [ 8.199308] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
    [ 8.200763] excluding 0x170-0x177 0x1f0-0x1f7 0x300-0x30f 0x370-0x37f
    [ 8.201559] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
    [ 8.201948] excluding 0x3f0-0x3ff 0x4d0-0x4d7
    [ 8.202341] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
    [ 8.202952] clean.
    [ 8.203000] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
    [ 8.204946] clean.
    [ 8.205013] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
    [ 8.205024] excluding 0xc0000-0xc7fff 0xdc000-0xfffff
    [ 8.205096] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
    [ 8.205128] clean.
    [ 8.205177] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
    [ 8.205200] excluding 0x60000000-0x60ffffff
    [ 8.205252] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
    [ 8.205948] clean.
    [ 8.260695] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 8.260987] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 8.261238] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 8.261465] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 8.261705] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 8.261931] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
    [ 8.263318] ACPI Warning: 0x000018e0-0x000018ff SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
    [ 8.263328] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 8.264893] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 8.264941] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
    [ 8.268408] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 8.283555] systemd-udevd[123]: renamed network interface eth1 to wlp6s2
    [ 8.508098] psmouse serio2: synaptics: Touchpad model: 1, fw: 5.9, id: 0x23aeb3, caps: 0xa04713/0x10008/0x0, board id: 3655, fw id: 28762
    [ 8.543316] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input16
    [ 9.444744] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 9.746168] fuse init (API version 7.22)
    [ 9.795856] Adding 2096476k swap on /dev/sda4. Priority:-1 extents:1 across:2096476k FS
    [ 10.804356] sky2 0000:02:00.0 enp2s0: enabling interface
    [ 10.804455] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
    [ 12.524356] sky2 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex, flow control rx
    [ 12.524399] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
    [ 15.965900] systemd-logind[185]: Watching system buttons on /dev/input/event5 (Power Button)
    [ 15.966015] systemd-logind[185]: Watching system buttons on /dev/input/event2 (Video Bus)
    [ 15.966122] systemd-logind[185]: Watching system buttons on /dev/input/event3 (Power Button)
    [ 15.966231] systemd-logind[185]: Watching system buttons on /dev/input/event1 (Lid Switch)
    [ 15.966337] systemd-logind[185]: Watching system buttons on /dev/input/event4 (Sleep Button)
    [ 29.280330] systemd[1]: Unit [email protected] entered failed state.
    [ 29.380404] systemd[1]: [email protected] holdoff time over, scheduling restart.
    [ 29.383839] systemd[1]: Unit [email protected] entered failed state.
    [ 283.968752] sky2 0000:02:00.0 enp2s0: Link is down
    [ 288.653377] sky2 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex, flow control rx
    [ 301.725348] sky2 0000:02:00.0 enp2s0: Link is down
    [ 303.401808] sky2 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex, flow control rx
    [ 978.946847] usb 1-5: USB disconnect, device number 4
    [ 978.952420] cdrom: issuing MRW background format suspend
    [36653.884288] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
    [36653.884298] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
    [36653.884304] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
    [36653.884310] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
    [36653.983274] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
    [36653.983488] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
    [40311.593171] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [40311.595838] sr 0:0:1:0: Attached scsi generic sg1 type 5
    [40311.596002] sd 3:0:0:0: Attached scsi generic sg2 type 0
    [43081.692487] EXT4-fs (sda5): re-mounted. Opts: data=ordered,commit=0
    [43081.983029] EXT4-fs (sda2): re-mounted. Opts: commit=0
    [43083.232434] ipw2200: Failed to send POWER_MODE: Command timed out.

    cfr wrote:
    Welcome to the forums.
    Have you tried uninstalling xf86-input-keyboard? If you want evdev to handle it, that is.
    Does the keyboard work when you decrypt the encryption device (or maybe you use a keyfile)?
    Does it work if you boot to the command line?
    Is the keyboard hook included in the initramfs? (Though I don't think this should matter for later.)
    first place, tnx for the answer and sorry cause it took too long for me to answer back.
    I uninstalled xf86-input-keyboard. now i get an error at boot time but it passes to arch so no big deal.
    About encryption device I have no idea cause i never chose to encrypt anything.
    About working at command line, answer is no. It is not working in my bash and also at tty1.
    about keyboard hook, Answer is yes, it is included.
    I'm really enjoying my systems speed with arch but this problem is really killing me. Now i'm using my laptop like a PC no movement allowed cause I must take a keyboard with me.
    and really, an active forum and just one answer to my question!

  • Ibook G4 late 2004 model charging intermittently-flashes amber then green

    Hi there, i have an ibook G4 14 inch late 2004 with mac os x 10.4.11. my previous 45w power cord needed to be jiggled in order to power the laptop (it was pretty damaged). yesterday, it stopped working completely, so i went to the apple store and bought a new 65w power cord. of course, it worked perfectly in the store. when i went home, it seemed to work perfectly until the battery reached about 37%, then it started doing this weird thing. while plugged in, the light on the power cord started flashing, changing from green to amber. it will be green for about 8 seconds, then amber for about 6 seconds.
    it does this whether the computer is being used or shut down. while i was using the computer, the battery drained pretty quickly, so i shut it down and left it plugged in overnight. overnight, it seemed to have charged a little bit. the battery says it is 55% charged and, when i open my energy saver on system preferences, it will appear as if it is charging while the power cord light flashes amber, then stops charging when the power cord light flashes green. as i said, it will be amber for about 6 seconds, then green for about 8 seconds.
    i tried resetting the PMU, but it did not work (perhaps i did it incorrectly?). i then tried to reset the pmu and the pram via these instructions:
    turned computer off.
    Make sure the Caps Lock key is not down.
    Restart the computer. Immediately after hearing the startup sound, simultaneously press and hold Command-Option-P-R. (If you do not hold down the key combination within 5 to 10 seconds after the computer restarts, you must repeat steps 1-3.)
    Hold down the keys until you hear the startup sound again. Then release the keys.
    If the computer shuts itself off, press the reset button on the back of the computer to turn it back on.
    that didn't work. then i tried to just reset the PMU again (via the support instructions) by turning the computer off, then simultaneously pressing and then releasing Shift-Control-Option-Power on the keyboard. Did not press the fn (Function) key while using this combination of keystrokes.
    Waited 5 seconds, then pressed the power button.
    that didn't help either.
    i have been trying to figure this out but have not been able to thus far. of course, aside from being able to read, i have no computer savvy whatsoever. ANY help would be so appreciated. sorry i typed so much, but since i do not know much about computers, i was unsure what information was most pertinent.
    thanks again, SOOOO much, for any help. i would be glad to answer any medical questions as a thank you.
    here is the info from the power portion of the system prefs (with the power cord plugged in):
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 20
    Dynamic Power Step: No
    Reduce Processor Speed: No
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: Yes
    Wake On Modem Ring: Yes
    Display Sleep Uses Dim: Yes
    Battery Power:
    System Sleep Timer (Minutes): 15
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 5
    Dynamic Power Step: Yes
    Reduce Processor Speed: No
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On Modem Ring: No
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Battery Information:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 2959
    Remaining Capacity (mAh): 1740
    Amperage (mA): 0
    Voltage (mV): 14916
    Cycle Count: 360
    AC Charger Information:
    AC Charger (Watts): 0
    Connected: No
    Charging: No
    Hardware Configuration:
    Clamshell Closed: No
    UPS Installed: No

    There may be other issues in the computer's hardware, such as the
    battery; as it should have about 4,000 (mAh) in full capacity when it
    is charged and the one you have appears to be at best, 50% of that.
    Also, there is a chance the DC-in Board may be defective or have a
    poor internal connection where the AC Adapter plugs into the iBook.
    There are some pages at iFixit.com about how to remedy this defect;
    and parts are available to repair this, still. (But suspect the battery, 1st.)
    I'm looking at the charging information on your log report and wonder if
    the battery is the reason why there is a Zero, in that section; or if there
    is some DC-in Board reason. Without a known-good battery, it's hard to
    tell what else may be going on. Unless you take it to a Genius bar...(?)
    • iBook G4 - iFixit guides:
    http://www.ifixit.com/Browse/iBook_G4
    This appears to be closer to the specific guide page, to include your iBook:
    http://www.ifixit.com/Device/iBookG4_14%22_933_MHz-1.33GHz
    Troubleshooting power related issues in a portable computer can be a
    bit tedious as the computers age, and potential sources of the problem
    may be at play in there, at the same time.
    There also is a matter of calibrating a battery on a routine basis, to be sure
    it works correctly and the microchip controller for charging it is working OK.
    • Apple Portables: Calibrating your computer's battery for best performance:
    http://support.apple.com/kb/HT1490?viewlocale=en_US
    The battery is the most likely culprit in the matter of the charge light indicator
    changing color from Amber to Green and back again, like that. This is a matter
    of troubleshooting, so if you know someone with a healthy iBook G4 battery
    (as noted in Profiler's battery or energy information, hi-power/low-use cycles)
    you may be able to check the activity without additional purchases.
    Be sure to get a replacement battery from a reputable company, as some of
    the third-party cheap imports have less battery capacity when new than an
    old partially used Apple battery would have. (And flaky warranty, too.)
    The battery is the most likely item, at this point. A replacement is suggested.
    Good luck & happy computing!

  • Microsoft Office 2004 (Word) unable to save files  I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

    Microsoft Office 2004 (Word) unable to save files
    I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
    So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
    How can I get rid of this error message?

    Look, I realize you might have to get your machine working, so this is how you revert back.
    Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
    #1 Backup your personal data off the machine.
    Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
    Disconnect all drives now to prevent any mistakes from occuring.
    #2 Reinstall OS X 10.6 from disk
    Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
    Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk  of your internal drive  (do not format or erase!!), Quit DU and simply re-install 10.6.
    Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway)  or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
    #3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
    Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
    #4 Reinstall any non-working third party programs
    When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
    If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
    https://support.apple.com/kb/TS2570
    That's it really.

  • Trouble shooting guide! Read this first!!!! rev 13-1-2004

    (Revision 13-1-2004)  
    Hi there,
    Follow everything on the list, even if it doesn't look like it would solve your problem, most problems are created somewhere else!
    To give some examples:
    CPU won't run FSB133....mostly powersupply or CPU-cooler.
    Videocard won't load drivers....mostly powersupply.
    Sound won't work.....mostly metal-standoff's.
    Windows won't install, file read error.....mostly CPU-cooler, Bad-ram or powersupply.
    That is why you need to go over the entire list and check all!
    Before you start doing anything, remove the power and make sure that you have touched the metal case of your system. If you don't you could damage your system due to static discharge!  
    Thanks to Arioch and Dragon60 for comments on this.
    There are several reasons why this happens.....to name the most commen:
    CPU speeds  
    You have a Duron, that CPU is 100FSB!
    You have a Athlon(XP) and it's showing the wrong speed, set the CPU-FSB to 133....
    Or 166 when it's a FSB333 CPU....or 200 when it's a FSB400 CPU....
    Some boards have a jumper to set it, other do it in the BIOS.
    Check your manual for this.
    Speeds must be:
    Duron upto 1300MHz = 100MHz (=200DDR)
    Duron from 1400MHz = 133MHz (=266DDR)
    Athlon B type = 100MHz (=200DDR)
    Athlon C type = 133MHz (=266DDR)
    Athlon XP - C type = 133MHz (=266DDR)
    Athlon XP - D type = 166MHz (=333DDR)
    Athlon XP - E type = 200MHz (=400DDR)
    Use this link to see if your motherboard actually supports your CPU.
    The TBred CPU's (0.13) start from XP-1700 and up, but not all boards support this CPU and they either show on the D-LED all red or don't start at all!!
    The K7T266pro2 is an exception, it can be made to support the TBred CPU's, on this link you find all the info on how to make it work.
    Many reports have told us that FSB333 CPU's work on KT3-Ultra boards work just fine, but it's unsupported by MSI, we don't know why....
    As for mulipliers with AMD CPU's, just set them Automatic, as they are hardcoded on the CPU themselves and will allway's be correctly, even if if you think the BIOS doesn't know it.
    How to recognise the CPU:
    If you look on the dice, there are letters after the speed.
    The last letter will tell you the FSB of the CPU.
    B=100MHz (=200DDR)
    C=133MHz (=266DDR)
    D=166MHz (=333DDR)
    E=200MHz (=400DDR)
    To recognise a CPU quickly, checkout this link.
    Thanks Mellops.
    The MHz setting must match your setting in the BIOS for FSB value, as it translates to the correct FSB setting for the CPU.
    The best way to identify a processor is by using the OPN (Ordering Part Number) which can be found on the processor (E.g. AXDA 2700 D K V 3 D).
    Detailed information on the code can be found in this AMD document. (Thanks Hans)
    CPU Cooling  
    CPU cooler not made for your CPU, check if it can handle your CPU....
    CPU cooler mounted wrong!, take it off and check it as it will fit 2 way's, but only 1 is the right one, examine very carefull!
    The cooler has a lower part that needs to go over the bump (higher part) of the socket, if it's not over there it won't cool the entire dice and WILL give you trouble.
    Also check if it's making contact with the entire dice of the CPU...
    Make sure you regrease it again, the same grease/paste can't be used twice!
    YOU MAY NEVER USE A THERMALPAD OR GREASE AGAIN! APPLY NEW EVERY TIME YOU TAKE THE COOLER OFF!!  
    top 2 show how not to do it
    Used too much silver-grease! It will shorten the bridges on the CPU, clean it and use white-paste.
    (Silver-paste is not recommended in any case!)
    The latest AMD XP CPU's (XP-2200 and above) require a copperbased heatsink because the dice is smaller and generates far more heat per square cm then the "old" CPU's do.
    How to check the cooler before taking it off.
    There is a simple way to check the cooler without taking it off.
    You do this by first checking your idle temp with PCAlert, it should be below 50-55C.
    Then you download a client from www.distributed.net, let this client run for about 10 minutes while monitoring the temps, after about 1 minute or so it should stabilize and your temp should have gone up about 10-15C (max).
    If it still goes up or the system crashes, there is a big chance you mounted the CPU-cooler wrong.
    When you can't run this check, try with FSB100, if the system does run the check then, it could be well that the cooler is mounted wrong or your powersupply doesn't have enough power.
    ***** YOU CAN'T CHECK THE CPU COOLER ON TEMPS OR FAN RUNNING, IT MUST BE TAKEN OFF THE CPU!!! *****  
    Cleaning the CPU and Cooler - thanks to Dragon60 for his addition.
    An additional comments about this is what you clean the CPU with in this situation. The best thing to use is isopropyl alcohol. If this is not available then metholated spirits would do.
    Make sure you allow the CPU to dry properly before you put it back in. This also means DO NOT try and clean it whilst it is still in the socket as some of the cleaning fluid, grease and dirt may get underneath and short some pins.
    Last but not least. DO NOT use acetone to clean anything inside your PC. (or outside for that matter) It MAY not do any damage BUT it may disolve some parts.
    Thanks Dragon60.  
    If you don't understand what we are talking about on this cooler matter, then read this link: AMD CPU & Cooling guide  
    Powersupplies  
    Powersupply too little, most commen cheap 300W CPU's can't handle an XP-1700 or above, try a better one to be sure.
    Make sure your powersupply has about 185W combined on the 3.3+5V and that the 3.3V has 20A or above.
    That should be enough for most systems.
    On the latest boards the 12V has become very important too, expecialy with TBred CPU's.
    Make sure yours can give 18A or more on the 12V line too.
    I have found that a lot of cheap 350W will fail with modern boards and TBred CPU's.
    Allway's make sure you have a decend PSU, it never fails to spent a bit more on that part!
    Borrow a bigger one from a friend if you are not sure....
    More info about powersupplies: Click here.
    And the second you must read: Click here.
    Powersupplies with these type of numbers on them or higher should be fine:
    3.3V - 28A or better
    5V - 30A or better
    12V - 18A or better
    Watch out!! Cheap PSU's like Q-Tec come nowhere near these figures!!
    Do NOT trust the 300W or 400W rating on them!!!
    Q-Tec is about the worst of them all!!  
    Metalclips  
    Stand-off's left between the board and the case, take the board out and check for too many of those metal-clips, they can shorten circuits and cause al sorts of problems (most of the time audio problems)
    RAM
    Ram problems, don't try to run with PC100 (SDram boards) when you have a 133FSB CPU, get PC133 ram of decend quality.
    In any case, don't use cheap quality ram (Crucial seems decend, but give's a lot of problems, I consider these cheap quality too :P ), replace the ram with another brand to see if it fixes it....
    DDR ram speeds:
    Duron upto 1300/Athlon-B =100FSB=PC-1600=DDR200
    Duron from 1400 =133FSB=PC-2100=DDR266
    Athlon-C/XP upto 2600 =133FSB=PC-2100=DDR266
    Athlon XP D-type and above =166FSB=PC-2700=DDR333
    Athlon XP E-type and above =200FSB=PC-3200=DDR400
    Higher DDR speeds are only a must if you try to overclock, they have no speed gain if run at the correct speed. You may use faster ram on a slower system, the speeds given are what is needed minimum.
    Perform RAM test tools, ie http://www.memtest.org if you suspect RAM is faulty, such as BSOD or data corruption. [added by Maesus]
    Try your system allway's with 1 stick of ram, adding more sticks can give all the trouble too.
    Some sticks just won't work in pair and a lot fail when you put 3 or more in the system.
    When you want to use 3 sticks, make very sure you use the MSI tested ones, they are your best chance that they work without problems.
    If still nothing, try to seat the ram in another slot, sometimes they work better in another slot.
    Thanks boost
    Or rise the Ram voltage a little, be carefull doing this!
    Sometimes this works when you have a lot of ram in there.
    BIOS  
    BIOS settings not right, clear the CMos and start with the default settings, if it works, try setting ONLY the FSB to 133 if needed, nothing more.....
    And go further from there......
    Clearing CMos
    When you clear the CMos, make sure that all power is cut from the system.
    This is done by takeing the wall-plug out or use the switch on the powersupply to turn it off.
    On most boards, as far as I know all MSI boards, you must set the JBat1 to position 2-3 (clear position) for about 10 seconds, then set it back to 1-2 (keep data position)
    After this your CMos should be cleared and you can turn the system back on.
    In some rare cases it's needed to take the battery out too for a minute or so.
    It can happen that the system will prompt you to set the BIOS again, go into the BIOS and set everything you need, then save the settings.
    Thanks fguevara.
    Harddisks  
    Harddisk is giving problems, most of the time with WD drive's, they are jumpered somewhat strange compared to others:
    No jumper = Stand-Alone no other drive attached to the cable.
    Jumper master = if you have a slave drive attached
    Jumper slave = when it's slave to another drive
    Harddisk is doing weird things:
    Make sure you have connected the blue connector to the board, and don't let the other end of the cable unused, make sure there is a device connected to it.
    The middle connector can be left into the air without problems if not needed.
    IBM harddisks seem to fail a lot, try Drive-Fitness-Test on it, see if it has problems.
    Click here for DFT
    Other brand drives can have problems too, make sure they are ok, as harddisk failure can cause all sorts of problems.
    Allway's be sure your harddisk is in tip-top shape, if not, replace it and try another to verify.
    For more information read this: Click here.
    To know what harddisks your motherboard support, use this link.
    To enable harddisk over 137GB in Win2000 edit this registry key:
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Atapi\Parameters]
    "EnableBigLba"=dword:00000001
    The KT4 raid boards only support 1 harddisk on IDE3, the rest must be SATA drive's!!
    Harddisk/power led not functioning - thanks to Tweetyoost
    If your HD led or power led not work try to switch(wrong + or - side) the connectors on the motherboard.
    leds will work only when + or - is correct
    Thanks Tweetyoost.  
    Floppy drive's  
    If your floppy drive doesn't work or the led stay's on all the time.
    Make sure the floppy is set correctly in the BIOS, as the BIOS doesn't autodetect a floppy drive.
    Check the cable, make sure the twist in the cable is at the floppy-drive side.
    If the light stay's on, flip the connector at the floppy-drive arround.
    Sometimes it happens that even after all this, they still don't work, try with another drive from another brand.
    Not able to enter the BIOS or lockup  
    When you try to enter the BIOS it won't go in there or
    lockup, but your system is running fine.
    This symtom can happen when your CPU-Cooler is giving spikes on the coolerwire.
    Try with another brand of cooler to test if it solves it.
    Keyboard and optical mouse lights stay on after power off[/U]
    Some motherboards have a jumper called JKBV1, this jumper is located (mostly) near the keyboard connector, put it in the other position.
    If your board doesn't have the jumper, try to find the following BIOS settings and turn them off:
    resume on KBC
    resume on PS/2
    resume by alarm
    USB ports not working[/U]
    Check in the BIOS if the ports are enabled.
    USB2.0 ports are supported in Win2000+SP3 and XP+SP1, just let the OS reinstall the ports and they should work.
    Thanks Stygge
    Replacing parts and the system won't boot after
    It's never a good idea to replace stuff like CPU and ram without taking the board out of the case.
    But if you still like to do so, please support the board, because if you don't you might bent the board a little and cause other components to make bad contact.
    Allways support the board when you replace stuff, no matter what!
    Also make sure your system can take the replacement, it could happen for example that your powersupply can't handle your changed videocard from GF2MX to GF4Ti4600.
    Test all the parts in another system
    Make sure that the new part is in good working order in the first place (in particular: videocard, CPU, memory): try it in another system, or have it demonstrated by the one you bought it from if possible.
    Testing might also give you a clue on what is actually wrong in your own system.
    Thanks HansH.
    Checking the powersupply
    Don't do this if you don't know what you are doing!
    Disconnect the powersupply.
    Orientate the 20pin Powerconnector with the clip up.
    Locate pin 4 and pin 8 top row, mostly green and black wire.
    Use a wire to short them (or better a 12V test lamp).
    Now connect the power and the fan inside the powersupply should start spinning.
    If it doesn't your powersupply maybe dead.
    Thanks HansH.
    KT4 users  
    Please read the Un-Official KT4 guide if you have CRC errors or strange crashes.
    These can be BIOS problems.
    In any case !!!Only flash if the system is stable!!!
    Set default-settings and FSB100 to make it stable first!!!
    Motherboards making a Siren-sound
    If your board is making the sound of a firetruck, BEEP-BOOP-BEEP-BOOP...
    Check the folowing:
    1. CPU too hot
    2. chassis intrusion was enabled in the BIOS
    3. PSU is below min/max allowable value
    Stutter in audio
    Remove your antivirus software.
    We have heard a few cases where the stuttering was created by badly behaving antivirus software.
    Disable cpu halt command if it's in the BIOS (Thanks Pascal16)
    Windows  
    Windows2000/XP won't run stable, try to disable APIC and install again....
    Not all drivers/devices like the APIC.
    Windows2000/XP won't install USB2.0, install the latest servicepak (SP3 Win2000 or SP1 WinXP).
    Let Windows rediscover the USB ports, they should work now.
    If you have driver or other problems and don't know what to do anymore but Windows does function without crashing, read this: Click here.
    Audio [added by Maesus, 20/2/2003]
    Can't stream AC3 via SPDIF to external DD decoder? try this ac3filter [info provided by Manfred ]
    Lan not working 100MBit
    You could try this patch, seems to work on some boards.
    The download-link is at the bottom of this post.
    I think I have about covered all most commen problems....
    Check those first before you ask us, as it's not fun to type the same over and over again.... :(
    Another good link for trouble shooting is here: Link
    If you have more issues that can solve problems, please write your thing below......
    I will insert your comments in this guide, with credits, offcourse 8)
    !!I will delete any attempt for discussion or problem report below this message.....!!
    Please report back, in another thread, if your problem was solved and how you did it, this will help others a great deal.
    It's only ment to help people as a guide to where the problem can be, start a new thread if this guide didn't solve your problem and you need more help!
    This thread is only for the experts to guide you into a solution :]

    Dude thank-you for your wonder detailed knowldge, I have descovered that lets say xp 1700 in a ultra 2 can only handle at the most 143fsb mult at 12.
    Given the settings" irq's are a major",part of directing traffic and power? example:
    Sound blaster Live , uses two irq's most common at"Auto" is, irq 10, or 5, and Sound blaster 16 emulation usually takes irq 5,. I have found that the sound card in slot3 works great , but to do this I had to change the Bio's and assign slot 3 irq 7 . and make sure printer port has share irq enabled
    Problems that accure with bad traffic are like this. Start a dedicated server. minimize than start your game?":censored:  no sound what could be wrong"? Shoot another problem Connection problem?. The computer nerd is getting trouble over the ordeal. ANSWER! IRQ can fix the problem, Study the irq and make changes as you go. "what would it be like with no stop signs,,,that is the same as a irq. with the same knowldge this topic brings IRQ need to be clearly understood.
    I can honestly say my system is error free and running like a dream.
    xp 2500 barton 333
    creative sound 5.1gamers.
    512 mb kingston ram 400 mhz
    boadband either onboard.
    MSI 5700 128 mb ddr
    Setting are:
    163 fsb
    mult of 11
    ddr 333
    video memory clock down to 450mhz
    3d clock to 390mhz
    The delta is a smooth running board also I want to mention to the person with crackling sounds, change the irq like I did, that fix the problem and the power is totaly too good to be true.

  • Dual G5 late 2004. Some problems with fan and freeze and now can't start

    I just purchased a late 2004 Dual 2.5 Gig, with PCI-x and 1 gig ethernet. 1 Gig of what I presume to be factory ram and blue toothe. Connected to a new 23" Apple display.
    The problems I have been having pale to where I stand now. I am stuck and can't move forward. At this point, the computer is off. When I try to turn it on, it does little to nothing and gradually the fan speed increases until the computer sounds like it wants to take off. The screen either stays dark, or sometimes I see the ? briefly, and then the grey screen with logo and that is where it stops. Currently I can't get past a lot of fan noise??
    Can I get this thing started?? I have tried both starting from CD and hard drive. No luck.
    This whole mess started yesterday and has continually gotten worse. Those details I can get into if needed, but for now, what can I do to see the screen and start over.
    I just bought the machine, and I was doing a clean install that was acting funny. Hard drive sleep mode would cause the machine to not wake up. Specifically it was the monitor that would not wake up. The keyboard and the computer would still respond when I adjusted the volume. The screen was black.
    I narrowed the problem to drive sleep, or monitor sleep by using the energy saver preferences. Just the monitor sleeping wasn't the probem. The computer would wake up. But if the hard drive went to sleep, then I could never get the screen back and the computer acted dormant. The only thing I could get was the volume sound from the computer and lights on the keyboard.
    I ran Techtool Pro 4.1.2 ( i think ) and it reported possibe problems on the hard drive with the volume. I made the changes hoping that would fix the problem? No.
    I decided to flush it all and start over with the install cd, make sure firmware was good, reformat the drive, and then install the System. But instead, I got caught is this loop of death that I can't get out of.
    It had a kernal panic the first day I turned it on, but that was the last one. (dark screen with white message) The computer ran rather sluggish at times. I was shocked at times. Very slow finder response.
    So? Suggestions? I have searched Apple support and tried anything I can think of. This is my first G5, but I have had some exposure to OSX beginning around 10.2. I am at my wits end and would greatly appreciate some input. For now I have to get some sleep.
    Is my battery bad? It just won't start?
    Thank you for any help you can provide, or links to articles!!

    Hi Lawson, and a Warm Welcome to the Power Mac G5 Forum!
    You could try a PMU/SMU reset
    http://docs.info.apple.com/article.html?artnum=300341
    Use the second procedure if you have a button as shown in the photo - use the first method if you don't. You may not have to remove the intake fan assembly to get at the button. Observe static precautions and make sure to press the button once only.
    Then try to start up on the CD/DVD.
    If it fires up ok you could then proceed with the 10.4 install as before, and then combo update to 10.4.8
    http://www.apple.com/support/downloads/macosx1048comboupdateppc.html
    I would connect only a display, wired keyboard and mouse to start with - and disable any of the sleep, etc. Options in Energy Saver.
    You may wish to use the Disk Utility on the 10.4 retail disc(under Utilities in the menu) to Erase and zero(select Security Options) the drive before the install.
    The kernel panic and other problems could have been caused by a corrupted system on the boot drive, or by hardware problems, such as RAM, video card, battery, etc. Some of the hardware stuff is linked-to further down the post here
    http://discussions.apple.com/thread.jspa?messageID=3084827&#3084827
    However, try the PMU/SMU reset and erase/install first, and post again with details if you still have problems.

  • Xorg disables keyboard and mice [solved]

    after last update I cant use the trackpoint and keyboard on my IBM T40 under x, only the touchpad works.
    here is my xorg.conf
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
    Load "dbe" # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    # This loads the font modules
    # Load "type1"
    Load "freetype"
    # Load "xtt"
    # This loads the GLX module
    # Load "glx"
    # This loads the DRI module
    # Load "dri"
    EndSection
    # Files section. This allows default font and rgb paths to be set
    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    # RgbPath "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    # FontPath "/usr/lib/X11/fonts/local/"
    # FontPath "/usr/lib/X11/fonts/misc/"
    # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Speedo/"
    # FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    # FontPath "/usr/lib/X11/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "de"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "Auto" # Auto detect
    Option "Device" "/dev/input/mice"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    Section "InputDevice"
    Identifier "SynapticsMouse1"
    Driver "synaptics"
    Option "Protocol" "auto-dev"
    Option "Device" "/dev/input/mice"
    Option "MinSpeed" "0.09"
    Option "MaxSpeed" "0.18"
    Option "BottomEdge" "4200"
    Option "SHMConfig" "on"
    Option "FingerLow" "25"
    Option "LeftEdge" "1700"
    Option "MaxTapMove" "220"
    Option "MaxTapTime" "180"
    Option "FingerHigh" "30"
    Option "VertScrollDelta" "100"
    Option "TopEdge" "1700"
    Option "AccelFactor" "0.0015"
    Option "RightEdge" "5300"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
    Identifier "My Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync 31.5, 35.15, 35.5
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-70
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    #Section "Device"
    # Identifier "Standard VGA"
    # VendorName "Unknown"
    # BoardName "Unknown"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    ## Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    #EndSection
    # Device configured by xorgconfig:
    Section "Device"
    Identifier "** ATI Radeon (generic) [radeon]"
    Driver "radeon"
    Option "DynamicClocks" "on"
    Option "AGPMode" "4"
    Option "RenderAccel" "on"
    Option "EnablePageFlip" "on"
    Option "BIOSHotkeys" "on"
    #VideoRam 65536
    # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "** ATI Radeon (generic) [radeon]"
    Monitor "My Monitor"
    DefaultDepth 24
    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    InputDevice "SynapticsMouse1" "AlwaysCore"
    EndSection
    # Section "DRI"
    # InputDevice "SynapticsMouse1" "AlwaysCore"
    # Mode 0666
    # EndSection
    and the Xorg.0.log
    X.Org X Server 1.5.3
    Release Date: 5 November 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.27-ARCH i686
    Current Operating System: Linux t40 2.6.28-ARCH #1 SMP PREEMPT Tue Jan 6 10:26:22 UTC 2009 i686
    Build Date: 17 December 2008 08:20:05PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 12 13:04:51 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) | |-->Monitor "My Monitor"
    (**) | |-->Device "** ATI Radeon (generic) [radeon]"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (**) |-->Input Device "SynapticsMouse1"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
    (WW) Disabling Mouse1
    (WW) Disabling Keyboard1
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Loader magic: 0x81d5fe0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 4.1
    X.Org XInput driver : 2.1
    X.Org Server Extension : 1.1
    X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0@1:0:0) ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] rev 0, Mem @ 0xe0000000/0, 0xc0100000/0, I/O @ 0x00003000/0, BIOS @ 0x????????/131072
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded by default.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded by default.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (==) AIGLX enabled
    (==) Exporting typical set of GLX visuals
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 6.9.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 4.1
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 0.99.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.1
    (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
    ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
    ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
    ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
    ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
    ATI Mobility RADEON M98, ATI Radeon RV730 (AGP),
    ATI Radeon RV730 (AGP), ATI RV730XT [Radeon HD 4670],
    ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
    ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
    ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
    ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
    ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI RV670,
    ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3430, ATI FireMV 2450, ATI FireMV 2260,
    ATI FireMV 2260, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics
    (II) Primary Device is: PCI 01@00:00:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) RADEON(0): TOTO SAYS 00000000c0100000
    (II) RADEON(0): MMIO registers at 0x00000000c0100000: size 64KB
    (II) RADEON(0): PCI bus 1 card 0 func 0
    (**) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (**) RADEON(0): Option "AGPMode" "4"
    (**) RADEON(0): Option "EnablePageFlip" "on"
    (**) RADEON(0): Option "RenderAccel" "on"
    (**) RADEON(0): Option "DynamicClocks" "on"
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 0.1.0
    ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Radeon Mobility M7 LW (AGP)" (ChipID = 0x4c57)
    (--) RADEON(0): Linear framebuffer at 0x00000000e0000000
    (II) RADEON(0): AGP card detected
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): Legacy BIOS detected
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: drmOpenMinor returns 9
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
    (**) RADEON(0): Page Flipping enabled
    (II) RADEON(0): Will try to use DMA for Xv image transfers
    (II) RADEON(0): Detected total video RAM=32768K, accessible=65536K (PCI BAR=131072K)
    (--) RADEON(0): Mapped VideoRAM: 32768 kByte (64 bit DDR SDRAM)
    (II) RADEON(0): Color tiling enabled by default
    (II) RADEON(0): Max desktop size set to 2048x1200
    (II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
    (II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEON(0): ref_freq: 2700, min_out_pll: 12000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 18300, sclk: 183.000000, mclk: 260.000000
    (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=12000 max=35000; xclk=18300
    (II) RADEON(0): Bios Connector table:
    (II) RADEON(0): Port0: DDCType-0x60, DACType-1, TMDSType-1, ConnectorType-1
    (II) RADEON(0): Port1: DDCType-0x64, DACType-2, TMDSType-1, ConnectorType-3
    (II) RADEON(0): Port4: DDCType-0x0, DACType-0, TMDSType-0, ConnectorType-7
    (II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
    (II) RADEON(0): Output VGA-0 using monitor section My Monitor
    (II) RADEON(0): I2C bus "VGA-0" initialized.
    (II) RADEON(0): Output DVI-0 has no monitor section
    (II) RADEON(0): DFP table revision: 2
    (II) RADEON(0): I2C bus "DVI-0" initialized.
    (II) RADEON(0): Output LVDS has no monitor section
    (II) RADEON(0): Panel ID string: 1024x768
    (II) RADEON(0): Panel Size from BIOS: 1024x768
    (II) RADEON(0): BIOS provided dividers will be used.
    (WW) RADEON(0): LVDS Info:
    XRes: 1024, YRes: 768, DotClock: 65000
    HBlank: 320, HOverPlus: 16, HSyncWidth: 136
    VBlank: 38, VOverPlus: 2, VSyncWidth: 6
    (II) RADEON(0): Output S-video has no monitor section
    (II) RADEON(0): Default TV standard: NTSC
    (II) RADEON(0): TV standards supported by chip: NTSC PAL NTSC-J
    (II) RADEON(0): Port0:
    Monitor -- AUTO
    Connector -- VGA
    DAC Type -- Primary
    TMDS Type -- None
    DDC Type -- 0x60
    (II) RADEON(0): Port1:
    Monitor -- AUTO
    Connector -- DVI-D
    DAC Type -- None
    TMDS Type -- Internal
    DDC Type -- 0x64
    (II) RADEON(0): Port2:
    Monitor -- AUTO
    Connector -- LVDS
    DAC Type -- None
    TMDS Type -- None
    DDC Type -- 0x0
    (II) RADEON(0): Port3:
    Monitor -- AUTO
    Connector -- STV
    DAC Type -- TVDAC/ExtDAC
    TMDS Type -- None
    DDC Type -- 0x0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    finished output detect: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    finished output detect: 1
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    finished output detect: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    finished output detect: 3
    finished all detect
    before xf86InitialConfiguration
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): Output VGA-0 disconnected
    (II) RADEON(0): Output DVI-0 disconnected
    (II) RADEON(0): Output LVDS connected
    (II) RADEON(0): Output S-video disconnected
    (II) RADEON(0): Using exact sizes for initial modes
    (II) RADEON(0): Output LVDS using initial mode 1024x768
    after xf86InitialConfiguration
    (==) RADEON(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) RADEON(0): Using XAA acceleration architecture
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.2.1
    ABI class: X.Org Video Driver, version 4.1
    (==) RADEON(0): Assuming overlay scaler buffer width is 1536
    (II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
    (!!) RADEON(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
    (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) RADEON(0): RADEONScreenInit e0000000 0 0
    Entering TV Save
    Save TV timing tables
    saveTimingTables: reading timing tables
    TV Save done
    (II) RADEON(0): Dynamic Clock Scaling Enabled
    (==) RADEON(0): Using 24 bit depth buffer
    (II) RADEON(0): RADEONInitMemoryMap() :
    (II) RADEON(0): mem_size : 0x04000000
    (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    (II) RADEON(0): Depth moves disabled by default
    (II) RADEON(0): Using 8 MB GART aperture
    (II) RADEON(0): Using 1 MB for the ring buffer
    (II) RADEON(0): Using 2 MB for vertex/indirect buffers
    (II) RADEON(0): Using 5 MB for GART textures
    (II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
    (II) RADEON(0): Reserved area from (0,1024) to (1024,1026)
    (II) RADEON(0): Largest offscreen area available: 1024 x 7165
    (II) RADEON(0): Will use front buffer at offset 0x0
    (II) RADEON(0): Will use back buffer at offset 0x800000
    (II) RADEON(0): Will use depth buffer at offset 0xc00000
    (II) RADEON(0): Will use 16384 kb for textures at offset 0x1000000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) RADEON(0): [drm] framebuffer handle = 0xe0000000
    (II) RADEON(0): [drm] added 1 reserved context for kernel
    (II) RADEON(0): X context handle = 0x1
    (II) RADEON(0): [drm] installed DRM signal handler
    (**) RADEON(0): Using AGP 4x
    (II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x8086/0x3340; Card 0x1002/0x4c57]
    (II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
    (II) RADEON(0): [agp] ring handle = 0xd0000000
    (II) RADEON(0): [agp] Ring mapped at 0xb5856000
    (II) RADEON(0): [agp] ring read ptr handle = 0xd0101000
    (II) RADEON(0): [agp] Ring read ptr mapped at 0xb803d000
    (II) RADEON(0): [agp] vertex/indirect buffers handle = 0xd0102000
    (II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb5656000
    (II) RADEON(0): [agp] GART texture map handle = 0xd0302000
    (II) RADEON(0): [agp] GART Texture map mapped at 0xb5176000
    (II) RADEON(0): [drm] register handle = 0xc0100000
    (II) RADEON(0): [dri] Visual configs initialized
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0x1fff0000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    (==) RADEON(0): Backing store disabled
    (II) RADEON(0): [DRI] installation complete
    (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
    (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
    (II) RADEON(0): [drm] dma control initialized, using IRQ 11
    (II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
    (WW) RADEON(0): DRI init changed memory map, adjusting ...
    (WW) RADEON(0): MC_FB_LOCATION was: 0xe3ffe000 is: 0xe3ffe000
    (WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xd07fd000
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0xe3ffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xd07fd000
    (II) RADEON(0): Direct rendering enabled
    (II) RADEON(0): Render acceleration enabled
    (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Lines
    Scanline Image Writes
    Setting up tile and stipple cache:
    32 128x128 slots
    32 256x256 slots
    16 512x512 slots
    (II) RADEON(0): Acceleration enabled
    (II) RADEON(0): DPMS enabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00402000
    (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00406000
    (II) RADEON(0): Largest offscreen area available: 1024 x 7157
    (II) RADEON(0): Detected Radeon Mobility M7, disabling multimedia i2c
    (II) Loading sub module "theatre_detect"
    (II) LoadModule: "theatre_detect"
    (II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
    (II) Module theatre_detect: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): no multimedia table present, disabling Rage Theatre.
    (II) RADEON(0): Set up overlay video
    (II) RADEON(0): Set up textured video
    init memmap
    init common
    init crtc1
    init pll1
    restore memmap
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0xe3ffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xd07fd000
    restore common
    restore crtc1
    restore pll1
    restore LVDS
    (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (WW) RADEON(0): Option "BIOSHotkeys" is not used
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/radeon_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) RADEON(0): Setting screen physical size to 270 x 203
    (II) Synaptics touchpad driver version 0.99.3
    (--) SynapticsMouse1 auto-dev sets device to /dev/input/event8
    (**) Option "Device" "/dev/input/event8"
    (II) SynapticsMouse1: x-axis range 1472 - 5472
    (II) SynapticsMouse1: y-axis range 1408 - 4448
    (II) SynapticsMouse1: pressure range 0 - 255
    (II) SynapticsMouse1: finger width range 0 - 0
    (II) SynapticsMouse1: buttons: left right middle double triple
    (**) Option "SHMConfig" "on"
    (**) Option "LeftEdge" "1700"
    (**) Option "RightEdge" "5300"
    (**) Option "TopEdge" "1700"
    (**) Option "BottomEdge" "4200"
    (**) Option "FingerLow" "25"
    (**) Option "FingerHigh" "30"
    (**) Option "MaxTapTime" "180"
    (**) Option "MaxTapMove" "220"
    (**) Option "VertScrollDelta" "100"
    (--) SynapticsMouse1 touchpad found
    (**) Option "AlwaysCore"
    (**) SynapticsMouse1: always reports core events
    (II) evaluating device (SynapticsMouse1)
    (II) XINPUT: Adding extended input device "SynapticsMouse1" (type: TOUCHPAD)
    (--) SynapticsMouse1 touchpad found
    (II) RADEON(0): Damage tracking initialized for page flipping
    (EE) config/hal: couldn't initialise context: (null) ((null))
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) UnloadModule: "synaptics"
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0x1fff0000 0xe3ffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0x27ff2000
    finished PLL2
    Entering Restore TV
    Restore TV PLL
    Restore TVHV
    Restore TV Restarts
    Restore Timing Tables
    Restore TV standard
    Leaving Restore TV
    (II) RADEON(0): [drm] removed 1 reserved context for kernel
    (II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf8046000 at 0xb803e000
    (II) RADEON(0): [drm] Closed DRM master.
    Last edited by eg4matze (2009-01-12 12:47:16)

    hal couldnt start, I rebuild it with abs, now everything works

  • Keyboard issues after upgrading to Leopard

    Seems there's been quite a bit of discussion about this topic already but it's been confined to laptops and I haven't seen a solution yet. I'm seeing the same problems on a desktop computer using either a wireless or USB keyboard.
    After upgrading to Leopard, my keyboard would occasionally stop responding to keystrokes. I have seen this happen on both an Apple USB keyboard and my Logitech wireless keyboard. With either keyboard, the letter and number keys would stop responding but keys like the CapsLock and Delete keys would still work. I have seen this happen when using Mac Office 2004 (Excel and Word) and Safari. With Excel, when the keyboard stops responding, if I click on a different cell, the keyboard comes back. I did update to 10.5.2 and I do have the latest version of the Logitech software but the problems still persist.
    Strangely, I have only seen this happen on my MacPro but NOT my MacBook. There is a difference on how each machine was upgraded to Leopard though. On my MacBook, I did a clean install of Leopard on a new hard drive and then migrated my docs and apps from the old drive. On my Mac Pro, I did an upgrade installation over Tiger. Fortunately, I cloned my hard drive prior to installing Leopard so going back is an option and so is doing a clean install followed by a migration which is what I did on my MacBook.
    Is there a fix for the keyboard problems? Am I going to have to downgrade back to Tiger?

    Thanks for posting this. I thought I was alone in the universe. I have the problem with my mini, which came with Leopard installed. The USB keyboard will stop working in Word or Entourage ('04) and I have to close and reopen the document to get the keyboard going again. Thankfully, my mouse still works when this happens, so I can use it to close and save.
    It seems to sometimes be triggered when I switch between applications, but I haven't been able to replicate it consistently. It is particularly bad when using find in Word. The find window will go dead and I have to close it and reopen it to do another search. (Though interestingly, I don't have to close the Word doc.)
    It's irritating.

  • XORG: Keyboard don't work right

    Hi,
    after the last System update my keyboard (under xorg) is totally messed up! The arrow keys,the del key the Pos1 key, the End key.....  all don't work. All characters numbers and special characters like(!"§$%&/....) work though. Even the German "Umlauts" are working!
    Here my xorg.conf:
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this  section  is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
        Load        "dbe"   # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
        SubSection  "extmod"
          Option    "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
    # This loads the font modules
    #    Load        "type1"
        Load        "freetype"
    #    Load        "xtt"
    # This loads the GLX module
    #    Load       "glx"
    # This loads the DRI module
    #    Load       "dri"
    EndSection
    # Files section.  This allows default font and rgb paths to be set
    Section "Files"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
        FontPath   "/usr/share/fonts/misc"
        FontPath   "/usr/share/fonts/100dpi:unscaled"
        FontPath   "/usr/share/fonts/75dpi:unscaled"
        FontPath   "/usr/share/fonts/TTF"
        FontPath   "/usr/share/fonts/Type1"
    #    FontPath   "/usr/lib/X11/fonts/local/"
    #    FontPath   "/usr/lib/X11/fonts/misc/"
    #    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
    #    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
    #    FontPath   "/usr/lib/X11/fonts/Type1/"
    #    FontPath   "/usr/lib/X11/fonts/TrueType/"
    #    FontPath   "/usr/lib/X11/fonts/freefont/"
    #    FontPath   "/usr/lib/X11/fonts/75dpi/"
    #    FontPath   "/usr/lib/X11/fonts/100dpi/"
    # The module search path.  The default path is shown here.
    #    ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #    Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12).  This allows clients to receive these key
    # events.
    #    Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #    Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #    Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    #    Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    #    Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    #    Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    #    Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
        Identifier  "Keyboard1"
        Driver      "kbd"
        Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    #    Option     "Xleds"      "1 2 3"
    #    Option "LeftAlt"     "Meta"
    #    Option "RightAlt"    "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults).  For example, for a non-U.S.
    # keyboard, you will probably want to use:
    #    Option "XkbModel"    "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    #    Option "XkbModel"    "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #    Option "XkbLayout"   "de"
    # or:
    #    Option "XkbLayout"   "de"
    #    Option "XkbVariant"  "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #    Option "XkbOptions"  "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    #    Option "XkbRules"    "xorg"
    #    Option "XkbModel"    "pc105"
    #    Option "XkbLayout"   "us"
    #    Option "XkbVariant"  ""
    #    Option "XkbOptions"  ""
    #    Option "XkbDisable"
        Option "XkbRules"   "xorg"
        Option "XkbModel"   "pc105"
        Option "XkbLayout"  "de"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
        Identifier  "Mouse1"
        Driver      "mouse"
        Option "Protocol"    "Auto" # Auto detect
        Option "Device"      "/dev/input/mice"
    # Mouse-speed setting for PS/2 mouse.
    #    Option "Resolution"        "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    #    Option "BaudRate"  "9600"
    #    Option "SampleRate"        "150"
    # Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
        Option "ZAxisMapping"   "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
        Option "Emulate3Buttons"
    #    Option "Emulate3Timeout"    "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    #    Option "ChordMiddle"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices.  This is for example only.  Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    #    Identifier  "Mouse2"
    #    Driver      "mouse"
    #    Option      "Protocol"      "MouseMan"
    #    Option      "Device"        "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    #    Identifier "spaceball"
    #    Driver     "magellan"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    #    Identifier "spaceball2"
    #    Driver     "spaceorb"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    #    Identifier "touchscreen0"
    #    Driver     "microtouch"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "1412"
    #    Option     "MaxX"          "15184"
    #    Option     "MinY"          "15372"
    #    Option     "MaxY"          "1230"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    #    Identifier "touchscreen1"
    #    Driver     "elo2300"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "231"
    #    Option     "MaxX"          "3868"
    #    Option     "MinY"          "3858"
    #    Option     "MaxY"          "272"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonThreshold"       "17"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
        Identifier  "My Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
        HorizSync   31.5 - 64.3
    #    HorizSync  30-64         # multisync
    #    HorizSync  31.5, 35.2    # multiple fixed sync frequencies
    #    HorizSync  15-25, 30-50  # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
        VertRefresh 50-100
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
        Identifier  "Standard VGA"
        VendorName  "Unknown"
        BoardName   "Unknown"
    # The chipset line is optional in most cases.  It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    #    Chipset    "generic"
    # The Driver line must be present.  When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module.  Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
        Driver     "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for.  When this line isn't present, a device
    # section can only match up with the primary video device.  For PCI
    # devices a line like the following could be used.  This line should not
    # normally be included unless there is more than one video device
    # intalled.
    #    BusID      "PCI:0:10:0"
    #    VideoRam   256
    #    Clocks     25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
        Identifier  "** ATI Radeon (generic)               [radeon]"
        Driver      "radeon"
        #VideoRam    262144
        # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
        Identifier  "Screen 1"
        Device      "** ATI Radeon (generic)               [radeon]"
        Monitor     "My Monitor"
        DefaultDepth 24
        Subsection "Display"
            Depth       8
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       16
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       24
            Modes       "1400x1050" "1280x1024" "1024x768"
            ViewPort    0 0
        EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present.  Each describes
    # the way multiple screens are organised.  A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option.  In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
        Identifier  "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.  In this example, screen 2 is located to the
    # right of screen 1.
        Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
        InputDevice "Mouse1" "CorePointer"
        InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    # Section "DRI"
    #    Mode 0666
    # EndSection
    and the corresponding log:
    X.Org X Server 1.5.3
    Release Date: 5 November 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.27-ARCH i686
    Current Operating System: Linux stella 2.6.27-ARCH #1 SMP PREEMPT Fri Nov 28 10:56:24 UTC 2008 i686
    Build Date: 05 December 2008  09:10:55PM
            Before reporting problems, check http://wiki.x.org
            to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
            (++) from command line, (!!) notice, (II) informational,
            (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec  9 17:03:13 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) |   |-->Monitor "My Monitor"
    (**) |   |-->Device "** ATI Radeon (generic)               [radeon]"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
            /usr/share/fonts/misc,
            /usr/share/fonts/100dpi:unscaled,
            /usr/share/fonts/75dpi:unscaled,
            /usr/share/fonts/TTF,
            /usr/share/fonts/Type1,
            /usr/share/fonts/misc,
            /usr/share/fonts/100dpi:unscaled,
            /usr/share/fonts/75dpi:unscaled,
            /usr/share/fonts/TTF,
            /usr/share/fonts/Type1
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
    (WW) Disabling Mouse1
    (WW) Disabling Keyboard1
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Loader magic: 0x81d5900
    (II) Module ABI versions:
            X.Org ANSI C Emulation: 0.4
            X.Org Video Driver: 4.1
            X.Org XInput driver : 2.1
            X.Org Server Extension : 1.1
            X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@1:0:0) ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] rev 0, Mem @ 0xa8000000/0, 0xe0010000/0, I/O @ 0x0000c100/0, BIOS @ 0x????????/131072
    (II) System resource ranges:
            [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[b]
            [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
            [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
            [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
            [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
            [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded by default.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded by default.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.0.0
            Module class: X.Org Server Extension
            ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.0.0
            Module class: X.Org Server Extension
            ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
            compiled for 1.5.3, module version = 2.1.0
            Module class: X.Org Font Renderer
            ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.0.0
            ABI class: X.Org Server Extension, version 1.1
    (==) AIGLX enabled
    (==) Exporting typical set of GLX visuals
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.0.0
            ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
            compiled for 1.5.2, module version = 6.9.0
            Module class: X.Org Video Driver
            ABI class: X.Org Video Driver, version 4.1
    (II) RADEON: Driver for ATI Radeon chipsets:
            ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
            ATI Radeon Mobility X300 (M24) 3152 (PCIE),
            ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
            ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
            ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
            ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
            ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
            ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
            ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
            ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
            ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
            ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
            ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
            ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
            ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
            ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
            ATI Radeon X800PRO (R420) JI (AGP),
            ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
            ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
            ATI Radeon Mobility 9800 (M18) JN (AGP),
            ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
            ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
            ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
            ATI Radeon Mobility M7 LW (AGP),
            ATI Mobility FireGL 7800 M7 LX (AGP),
            ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
            ATI FireGL Mobility 9000 (M9) Ld (AGP),
            ATI Radeon Mobility 9000 (M9) Lf (AGP),
            ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
            ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
            ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
            ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
            ATI Radeon 9800XT NJ (AGP),
            ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
            ATI Radeon Mobility 9600 (M10) NQ (AGP),
            ATI Radeon Mobility 9600 (M11) NR (AGP),
            ATI Radeon Mobility 9600 (M10) NS (AGP),
            ATI FireGL Mobility T2 (M10) NT (AGP),
            ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
            ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
            ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
            ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
            ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
            ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
            ATI Radeon Mobility X300 (M22) 5460 (PCIE),
            ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
            ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
            ATI Radeon X800PRO (R423) UI (PCIE),
            ATI Radeon X800LE (R423) UJ (PCIE),
            ATI Radeon X800SE (R423) UK (PCIE),
            ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
            ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
            ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
            ATI FireGL unknown (R423) UR (PCIE),
            ATI FireGL unknown (R423) UT (PCIE),
            ATI Mobility FireGL V5000 (M26) (PCIE),
            ATI Mobility FireGL V5000 (M26) (PCIE),
            ATI Mobility Radeon X700 XL (M26) (PCIE),
            ATI Mobility Radeon X700 (M26) (PCIE),
            ATI Mobility Radeon X700 (M26) (PCIE),
            ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
            ATI Radeon Mobility 9100 IGP (U3) 5835,
            ATI Radeon XPRESS 200 5954 (PCIE),
            ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
            ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
            ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
            ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
            ATI Radeon XPRESS 200M 5975 (PCIE),
            ATI Radeon XPRESS 200 5A41 (PCIE),
            ATI Radeon XPRESS 200M 5A42 (PCIE),
            ATI Radeon XPRESS 200 5A61 (PCIE),
            ATI Radeon XPRESS 200M 5A62 (PCIE),
            ATI Radeon X300 (RV370) 5B60 (PCIE),
            ATI Radeon X600 (RV370) 5B62 (PCIE),
            ATI Radeon X550 (RV370) 5B63 (PCIE),
            ATI FireGL V3100 (RV370) 5B64 (PCIE),
            ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
            ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
            ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
            ATI Mobility Radeon X800 XT (M28) (PCIE),
            ATI Mobility FireGL V5100 (M28) (PCIE),
            ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
            ATI Radeon X850 XT PE (R480) (PCIE),
            ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
            ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
            ATI Radeon X850 XT (R480) (PCIE),
            ATI Radeon X800XT (R423) 5D57 (PCIE),
            ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
            ATI Radeon X700 PRO (RV410) (PCIE),
            ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
            ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
            ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
            ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
            ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
            ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
            ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
            ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
            ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
            ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
            ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
            ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
            ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
            ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
            ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
            ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
            ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
            ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
            ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
            ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
            ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
            ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
            ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
            ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
            ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
            ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
            ATI Mobility Radeon X1700, ATI Radeon X2300HD,
            ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
            ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
            ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
            ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
            ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
            ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
            ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
            ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
            ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
            ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
            ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
            ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
            ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
            ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
            ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
            ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
            ATI Radeon 4800 Series, ATI RV610, ATI Radeon HD 2400 XT,
            ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
            ATI RV610, ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
            ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI RV670,
            ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
            ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850, ATI RV630,
            ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
            ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
            ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
            ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
            ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Radeon HD 3470,
            ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Mobility Radeon HD 3430,
            ATI Mobility Radeon HD 3400 Series, ATI FireMV 2450, ATI FireMV 2260,
            ATI FireMV 2260, ATI ATI Radeon HD 3600 Series,
            ATI ATI Radeon HD 3650 AGP, ATI ATI Radeon HD 3600 PRO,
            ATI ATI Radeon HD 3600 XT, ATI ATI Radeon HD 3600 PRO,
            ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
            ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
            ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics
    (II) Primary Device is: PCI 01@00:00:0
    (II) resource ranges after xf86ClaimFixedResources() call:
            [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[b]
            [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
            [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
            [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
            [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
            [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
            [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[b]
            [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
            [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
            [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
            [4] 0   0       0x000a0000 - 0x000affff (0x10000) MS[b]
            [5] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[b]
            [6] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[b]
            [7] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
            [8] -1  0       0x00000000 - 0x00000000 (0x1) IX[b]
            [9] 0   0       0x000003b0 - 0x000003bb (0xc) IS[b]
            [10] 0  0       0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) RADEON(0): MMIO registers at 0x00000000e0010000: size 64KB
    (II) RADEON(0): PCI bus 1 card 0 func 0
    (**) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 0.1.0
            ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP)" (ChipID = 0x4e50)
    (--) RADEON(0): Linear framebuffer at 0x00000000a8000000
    (II) RADEON(0): AGP card detected
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.0.0
            ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): Legacy BIOS detected
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: drmOpenMinor returns 9
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
    (==) RADEON(0): Page Flipping disabled
    (II) RADEON(0): Will try to use DMA for Xv image transfers
    (II) RADEON(0): Generation 2 PCI interface, using max accessible memory
    (II) RADEON(0): Detected total video RAM=65536K, accessible=131072K (PCI BAR=131072K)
    (--) RADEON(0): Mapped VideoRAM: 65536 kByte (128 bit DDR SDRAM)
    (II) RADEON(0): Color tiling enabled by default
    (II) RADEON(0): Max desktop size set to 2560x1200
    (II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
    (II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 20000, sclk: 200.000000, mclk: 390.000000
    (II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000; xclk=20000
    (II) RADEON(0): Bios Connector table:
    (II) RADEON(0): Port0: DDCType-0x60, DACType-1, TMDSType-1, ConnectorType-1
    (II) RADEON(0): Port4: DDCType-0x0, DACType-0, TMDSType-0, ConnectorType-7
    (II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
    (II) RADEON(0): Output VGA-0 using monitor section My Monitor
    (II) RADEON(0): I2C bus "VGA-0" initialized.
    (II) RADEON(0): Output LVDS has no monitor section
    (II) RADEON(0): Panel ID string: AUO                     
    (II) RADEON(0): Panel Size from BIOS: 1400x1050
    (II) RADEON(0): BIOS provided dividers will be used.
    (WW) RADEON(0): LVDS Info:
    XRes: 1400, YRes: 1050, DotClock: 108000
    HBlank: 240, HOverPlus: 48, HSyncWidth: 112
    VBlank: 15, VOverPlus: 1, VSyncWidth: 3
    (II) RADEON(0): Output S-video has no monitor section
    (II) RADEON(0): Default TV standard: NTSC
    (II) RADEON(0): TV standards supported by chip: NTSC PAL
    (II) RADEON(0): Port0:
    Monitor   -- AUTO
    Connector -- VGA
    DAC Type  -- Primary
    TMDS Type -- None
    DDC Type  -- 0x60
    (II) RADEON(0): Port1:
    Monitor   -- AUTO
    Connector -- LVDS
    DAC Type  -- None
    TMDS Type -- None
    DDC Type  -- 0x0
    (II) RADEON(0): Port2:
    Monitor   -- AUTO
    Connector -- STV
    DAC Type  -- TVDAC/ExtDAC
    TMDS Type -- None
    DDC Type  -- 0x0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    finished output detect: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    finished output detect: 1
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    finished output detect: 2
    finished all detect
    before xf86InitialConfiguration
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1400x1050
    (II) RADEON(0): Adding Screen mode: 1280x1024
    (II) RADEON(0): Adding Screen mode: 1024x768
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): Output VGA-0 disconnected
    (II) RADEON(0): Output LVDS connected
    (II) RADEON(0): Output S-video disconnected
    (II) RADEON(0): Using user preference for initial modes
    (II) RADEON(0): Output LVDS using initial mode 1400x1050
    after xf86InitialConfiguration
    (==) RADEON(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.0.0
            ABI class: X.Org ANSI C Emulation, version 0.4
    (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) RADEON(0): Using XAA acceleration architecture
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.2.0
            ABI class: X.Org Video Driver, version 4.1
    (==) RADEON(0): Assuming overlay scaler buffer width is 1920
    (II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
    (!!) RADEON(0): For information on using the multimedia capabilities
            of this adapter, please see http://gatos.sf.net.
    (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC?  No, I don't.
    (II) resource ranges after preInit:
            [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[b]
            [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
            [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
            [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
            [4] 0   0       0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
            [5] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
            [6] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
            [7] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
            [8] -1  0       0x00000000 - 0x00000000 (0x1) IX[b]
            [9] 0   0       0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
            [10] 0  0       0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) RADEON(0): RADEONScreenInit a8000000 0 0
    Entering TV Save
    Save TV timing tables
    saveTimingTables: reading timing tables
    TV Save done
    (II) RADEON(0): Dynamic Clock Scaling Disabled
    (==) RADEON(0): Using 24 bit depth buffer
    (II) RADEON(0): RADEONInitMemoryMap() :
    (II) RADEON(0):   mem_size         : 0x04000000
    (II) RADEON(0):   MC_FB_LOCATION   : 0xabffa800
    (II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
    (II) RADEON(0): Depth moves disabled by default
    (II) RADEON(0): Using 32 MB GART aperture
    (II) RADEON(0): Using 1 MB for the ring buffer
    (II) RADEON(0): Using 2 MB for vertex/indirect buffers
    (II) RADEON(0): Using 29 MB for GART textures
    (II) RADEON(0): Memory manager initialized to (0,0) (1408,8191)
    (II) RADEON(0): Reserved area from (0,1200) to (1408,1202)
    (II) RADEON(0): Largest offscreen area available: 1408 x 6989
    (II) RADEON(0): Will use front buffer at offset 0x0
    (II) RADEON(0): Will use back buffer at offset 0xd10000
    (II) RADEON(0): Will use depth buffer at offset 0x1382000
    (II) RADEON(0): Will use 38912 kb for textures at offset 0x19f4000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) RADEON(0): [drm] framebuffer handle = 0xa8000000
    (II) RADEON(0): [drm] added 1 reserved context for kernel
    (II) RADEON(0): X context handle = 0x1
    (II) RADEON(0): [drm] installed DRM signal handler
    (==) RADEON(0): Using AGP 4x
    (II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x8086/0x3340; Card 0x1002/0x4e50]
    (II) RADEON(0): [agp] 32768 kB allocated with handle 0x00000001
    (II) RADEON(0): [agp] ring handle = 0xb0000000
    (II) RADEON(0): [agp] Ring mapped at 0xb37a2000
    (II) RADEON(0): [agp] ring read ptr handle = 0xb0101000
    (II) RADEON(0): [agp] Ring read ptr mapped at 0xb7f7a000
    (II) RADEON(0): [agp] vertex/indirect buffers handle = 0xb0102000
    (II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb35a2000
    (II) RADEON(0): [agp] GART texture map handle = 0xb0302000
    (II) RADEON(0): [agp] GART Texture map mapped at 0xb1922000
    (II) RADEON(0): [drm] register handle = 0xe0010000
    (II) RADEON(0): [dri] Visual configs initialized
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0):   MC_FB_LOCATION   : 0xabffa800 0x1fff0000
    (II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
    (==) RADEON(0): Backing store disabled
    (II) RADEON(0): [DRI] installation complete
    (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
    (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
    (II) RADEON(0): [drm] dma control initialized, using IRQ 10
    (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
    (WW) RADEON(0): DRI init changed memory map, adjusting ...
    (WW) RADEON(0):   MC_FB_LOCATION  was: 0xabffa800 is: 0xabffa800
    (WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0xb1ffb000
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0):   MC_FB_LOCATION   : 0xabffa800 0xabffa800
    (II) RADEON(0):   MC_AGP_LOCATION  : 0xb1ffb000
    (II) RADEON(0): Direct rendering enabled
    (II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
    (II) RADEON(0): Render acceleration disabled
    (II) RADEON(0): num quad-pipes is 1
    (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
            Screen to screen bit blits
            Solid filled rectangles
            8x8 mono pattern filled rectangles
            Indirect CPU to Screen color expansion
            Solid Lines
            Scanline Image Writes
            Setting up tile and stipple cache:
                    32 128x128 slots
                    32 256x256 slots
                    16 512x512 slots
    (II) RADEON(0): Acceleration enabled
    (II) RADEON(0): DPMS enabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00674c00
    (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00678e00
    (II) RADEON(0): Largest offscreen area available: 1408 x 6983
    (II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
    (II) Loading sub module "theatre_detect"
    (II) LoadModule: "theatre_detect"
    (II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
    (II) Module theatre_detect: vendor="X.Org Foundation"
            compiled for 1.5.2, module version = 1.0.0
            ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): no multimedia table present, disabling Rage Theatre.
    (II) RADEON(0): Set up overlay video
    (II) RADEON(0): Set up textured video
    init memmap
    init common
    init crtc1
    init pll1
    restore memmap
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0):   MC_FB_LOCATION   : 0xabffa800 0xabffa800
    (II) RADEON(0):   MC_AGP_LOCATION  : 0xb1ffb000
    restore common
    restore crtc1
    restore pll1
    finished PLL1
    restore LVDS
    (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) RADEON(0): Setting screen physical size to 370 x 277
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 0.99.1
            Module class: X.Org XInput Driver
            ABI class: X.Org XInput driver, version 2.1
    (II) Synaptics touchpad driver version 0.99.1
    (**) Option "Device" "/dev/input/event8"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (II) config/hal: Adding input device Logitech USB Receiver
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
            compiled for 1.5.2, module version = 2.0.7
            Module class: X.Org XInput Driver
            ABI class: X.Org XInput driver, version 2.1
    (**) Logitech USB Receiver: always reports core events
    (**) Logitech USB Receiver: Device: "/dev/input/event4"
    (II) Logitech USB Receiver: Found keys
    (II) Logitech USB Receiver: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "base"
    (**) Logitech USB Receiver: xkb_rules: "base"
    (**) Option "xkb_model" "evdev"
    (**) Logitech USB Receiver: xkb_model: "evdev"
    (**) Option "xkb_layout" "us"
    (**) Logitech USB Receiver: xkb_layout: "us"
    (II) config/hal: Adding input device Logitech USB Receiver
    (**) Logitech USB Receiver: always reports core events
    (**) Logitech USB Receiver: Device: "/dev/input/event3"
    (II) Logitech USB Receiver: Found x and y relative axes
    (II) Logitech USB Receiver: Found mouse buttons
    (II) Logitech USB Receiver: Configuring as mouse
    (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
    (II) config/hal: Adding input device C-Media USB Headphone Set
    (**) C-Media USB Headphone Set: always reports core events
    (**) C-Media USB Headphone Set: Device: "/dev/input/event2"
    (II) C-Media USB Headphone Set: Found keys
    (II) C-Media USB Headphone Set: Configuring as keyboard
    (II) XINPUT: Adding extended input device "C-Media USB Headphone Set" (type: KEYBOARD)
    (**) Option "xkb_rules" "base"
    (**) C-Media USB Headphone Set: xkb_rules: "base"
    (**) Option "xkb_model" "evdev"
    (**) C-Media USB Headphone Set: xkb_model: "evdev"
    (**) Option "xkb_layout" "us"
    (**) C-Media USB Headphone Set: xkb_layout: "us"
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "base"
    (**) AT Translated Set 2 keyboard: xkb_rules: "base"
    (**) Option "xkb_model" "evdev"
    (**) AT Translated Set 2 keyboard: xkb_model: "evdev"
    (**) Option "xkb_layout" "us"
    (**) AT Translated Set 2 keyboard: xkb_layout: "us"
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Found mouse buttons
    (II) Macintosh mouse button emulation: Configuring as mouse
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1400x1050
    (II) RADEON(0): Adding Screen mode: 1280x1024
    (II) RADEON(0): Adding Screen mode: 1024x768
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    sorry for this huge post - but i think that's all needed.... so does anybody have a clue?
    thanks and bye
    smax

    Thanks Bob for that very fast reply!
    But neither "Modifying hal configuration" nor "Using the Desktop Environment settings" (xfce) worked. So I tried the "I don't want this crap, how do I turn it off?" solution and well it works
    Maybe I turn it back on in a month or so.. but for now i'm fine with no hot plugging but a working keyboard...
    Thanks and Bye!
    smax
    Last edited by smaxer (2008-12-09 17:42:43)

Maybe you are looking for

  • How to get receiving and sending storage location in material document?

    Hi, guys, I am now writing a report about material document.  I need to get receiving storage location and sending storage location from material document  in MSEG table , Is there any function module for this ? Thanks. Justin

  • Payment on Account and dunning run

    One of our customers demands some changes within the Business One. The support in Ireland advised us to post these requirements in this Forum. Payments on Account will not be considered in dunning runs. The customers opinion is, that these Payments h

  • How to handle multiple DLL?

    I am using JNI to talk between Java and C++. The JNI and test.dll work fine for testing. But in real world, my test.dll need call other 10 dlls. So I just need to use System.loadLibrary() load all of them or I need change something. My envrioment is

  • LVOOP challenge question: How is Memory managed when objects are data members?

    Background: I am working on a compact field point and am sensitive to memory usage. I would like to know hoe the labview Realtime compiler treats my code (It is a bit of a Black Box. My Class contains other objects: and then later in my code I use wh

  • HELP! Applying a varray to a relational table via an object view

    Hi I could really do with some help on this one its drivin me nuts! I'm trying to create an object view for the following table using the following ADTs and a Varray: R_CUSTOMER CUSTID NUMBER LNAME VARCHAR2(25) FNAME VARCHAR2(25) STREET VARCHAR2(30)