Keynote remote function does not work anymore

I have updated my iphone 5s to iOS8 (8.0.2)
I use mavericks OS X 10.9.5 on my macbook pro.
Since i have updated my iphone, and KEYNOTE apps, I can't control my presentations with Iphone anymore .
I tried with an Ipad and all works great but i can't link my phone to keynote on mac via network or bluetooth.
Before upgrading my Iphone worked properly with this function.
When i open Keynote-preferences---remote controls on my mac, i can see the Iphone listed, but with a yellow triangle and the button to link it does not work.
anyone can help me ?
thank you.
Mauro

thank you Gary,
I guessed it too, but unfortunately i have something like this:
It's not english, but maybe you can notice that the last device has not "RIMUOVI" (REMOVE) function, but just "ABBINA" (LINK)
even if i push that button nothing happens and the little triangle persists.

Similar Messages

After updating to V 15.0 I have the issue that suddenly many but not all of the functions do not work anymore. Menues and download links do not work.

I have updated my firefox to version 15.0. After this I have the effect that at some unspecified time during use many of the functions stop working. Menu's do not open, download links do not work anymore and so on. Opening new tab's or windows still works. Links on pages partly work partly not. Copy and paste does not work anymore on webpages. It takes ending the firefox process and restarting to correct the issue until it happens again. I have those effects on totally different webpages. At this time it happens every time after I start Firefox but not right away. Firefox first works for some time and then it suddenly doesn't anymore without me having done anything special

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support?

My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support? Useless to say my PC didn't recognize the Ipod anymore either.

Anton, I wish I could help. I had an old iPod Classic (60 KB) as a gift but it went dead, I dropped it a few times accidentally, and it sat carefully saved until I had sufficient resources, energy and time to get the matter addressed. In my case, I actually took the thing (after making sure it was charged) to an Apple store and one of the geniuses at the genius bar at the back of the store took it and did a few things (unseen and un-noted) with his fingers and handed it to me with a sly smile. Voila, the thing was functional. I got a re-functionalized iTunes account and store access when I bought my iMac. I did lose a few tunes along the way because it didn't recognize my new iMac as the source (my old dead PC laptop), but I have a more functional memory than the iPod and recovered them all in other ways. The whole thing is humming better than ever. At over 11 gb full, I have 4.2 days worth of portable listening. Be patient; it took me four years to get musical nirvana in a pocket, but you'll get there faster. Call support.

Automatic Selected Item of List Builder Component Does not work (anymore)

Hi all,
Í'm working with Xcelsius Engage 2008 (version 5.3.2.0) and the automatic selection of an item at runtime of the list builder component does not work anymore. In a previous version it worked very well.
Here's the case: at runtime I want that the list builder component automatically puts the first item in the list to the destination section and selects it, so that a graph can show the underlying pushed data. In the previous version it worked o.k., but now at runtime the destination section remains empty at startup. If I interactively select an item from the source section to the destination section and update the list builder, the data is shown correctly, but it must done automatically, which worked o.k. in an earlier version of Xcelsius 2008...
This are my settings of the list builder component (which was running correctly earlier..):
-at the general tab I defined a range of labels
-at the general tab I defined 2 data column insertion series
-at the behaviour-common tab I defined selected items: position mode; items: the first item of the label list; insert items at runtime
-all of the data comes from an external xml data source
You can find an example of the visualisation at: http://onderzoek2.evinet.nl/projecten/10169/dynarap.htm. You will see that at start-up there is no item visible and selected in the destination section of the list builder....
I've tried every combinations of settings, build up the component from scratch, but its not working (anymore).
Greetings Erik-Jan Vriens

Hi njnits,
Print view button is a standard component of Xcelsius: look at it in the IDE
Exporting to Powerpoint is also a standard functionality, so yes. For this particular dashboard/report all data resides in an external xml-file which have to be accessible for Powerpoint
All visualisations, not only the table, in this/report fetch their data from an external xml-file, but a QaaWS-connection will also do the trick. You will have to write this dedicated service. In our case the xml-data is also generated automatically.
The external data is best defined as a sort of matrix, consisting of approx. 100 columns by 1000 rows. I agree it takes a lot of Xcelsius but it does the job....
Hopes this info helps....

Satellite U400 - the webcam does not work anymore

Hello guys here is my sudden probloema!
About a year ago I purchased a laptop
TOSHIBA - Satellite U400
with s.o. WinVista 32bit and with integrated webcam chicony etc. ....
For a year, everything worked correctly, but for some days now, the webcam does not work anymore.
As soon as I try to open it, a message of management software cam that says "Webcam driver open fail, please restart or computer room"
I tried to do it all: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam ....! updated bios notebook ....! useless!
the strange thing .. well that going into device manager ... the webcam is not there ....! but if the launch seems to open just then check quell caz ... Warning!!
Gan you help me?
Graziee

Are you familiar and comfortable with LINUX LIVE bootable discs to load an alternative operating system with unobtrusive but extensive Toshiba device support so you can determine if your webcam hardware is ruined or if the problem is software and possibly solved reinstalling Windows ?
At this point, you're pondering less time consuming but more expensive choices such as buying another web cam, or another computer and you might be temporarily borrowing someone else's web cam / using a non preferred spare web cam that isn't optimal for your needs.
Continuously downloading software, registry cleaners, and repeatedly reinstalling drivers will eventually ruin your Windows installation and consume more time than you've wasted so far and still doesn't guarantee to fix your malfunction.

TouchPad lock key does not work anymore on Dell XPS L401X

Hi everyone,
On my Dell XPS L401X laptop, there is a key to lock/unlock the touchpad. It used to work fine on Windows and on new fresh install ArchLinux, but now it does not work anymore. If I remember correctly, I did not change, configure any shortcut so far.
Any hint to fix this problem?
Many thanks!
Tinh

Try mapping the button as shown here: https://wiki.archlinux.org/index.php/To … are_Toggle
I'm sorry i can't help more.

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

TV does not work anymore on Qosmio G10

Good morning,
TV does not work anymore, may be due to an update. It has been working OK before.
When selecting TV option 'TV direct ' with MCE menu, I get the following error message: "necessary files for video display are not installed or do not work properly, restart MCE or the computer". Restarting MCE and / or G10 does not solve the problem.
-Intervideo WinDVD creator is installed.
-TV PCI tuner seems to work properly (as per hardware status)
Which files can be missing? What needs to be done?
Any help, suggestions, well appreciated.
Thank you to anyone answering this message.

Hello Luciano
Like you know on this way it is not easy to give you precise answer because we dont know what did you done exactly with your Qosmio.
Please try to use System restore tool at first and roll back the operating system to earlier time. Maybe this will help you and the MCE configuration will be as before.
Try it at first.

HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

Palm Desk Top 6.2 Address Look Up Function Does Not Work In Windows 7

I recently upgraded my desk top computer's operating system from Windows Vista Home Premium to Windows 7 Home Premium.  I synchronize with a Palm Tx PDA.  HP PalmOS customer support Chat helped me work through a compatibility issue that was preventing display of Address, Calendar, Memo and To Do items on my desk top computer via the Palm Desk Top 6.2 application.  I now find that the address look up function does not work (although it worked fine when I was running Vista). Without success, I tried running the repair tool as well as reloading the software (both overlay and clean reinstall). I would appreciate any help or suggestions to fix?
Post relates to: Palm TX

Hi,
844869 wrote:
CREATE TABLE TEST_EMPLOYEES
FIRST_NAME VARCHAR2(26 CHAR),
GRADE VARCHAR2(5 CHAR)
INSERT INTO TEST_EMPLOYEES (FIRST_NAME, GRADE) VALUES ( 'William', 45 ); ...Thanks for posting the CREATE TABLE and INSERT statements; that's very helpful.
William&45     1
Robin 43     1
Raymond          43     1
Richard          43     1
Karen          28     1
Michelle               1
Jonathan               1
Mark               1
Ann               1You may have noticed that this site normally doesn't display multiple spaces in a row.
Whenever you post formatted text (such as query results) on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.
This is one of the many helpful things found in the forum FAQ {message:id=9360002}
Are the results above what you're getting with some existing query, or are they the results you want?
If those are your current results, post your query. In that case, what are the results you want? Do you want this?FIRST_NAME GRADE RNK
William 45 1
Robin 43 2
Raymond 43 2
Richard 43 2
Karen 28 5
Michelle 6
Jonathan 6
Mark 6
Ann 6
Edited by: Frank Kulash on Feb 21, 2013 2:39 PM
I see you've added the desired results to your original message.
Here's one way to do that:SELECT first_name
,     grade
,     RANK () OVER (ORDER BY grade NULLS FIRST)     AS rnk
FROM     test_employees
ORDER BY grade          DESC     NULLS LAST

While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808

New iMac (10.9.4) & now my HP Photosmart 6520 "scan to computer" function does not work

Recently upgraded to a new iMac running 10.9.4. Printing works well from this computer and all other devices (iPad, iPhone, etc.). However, the "scan to computer" function does not work. In the "Scan" section of HP Utility when I click on "Scan to Computer" the error message reads "Scan to Computer Cannot Be Enabled. The software required for Scan to Computer could not be located on this computer. Please download and install the latest HP recommended software for your device from http://www.hp.com/support, and then try again.
Of course I have done this... twice... still no luck. Also ran Software Update and there was an update, but it made no difference.

Yes, did all that... in order. It did not resolve the problem. However, I did find what appears to be the answer. After re-installing the driver software DO NOT immediately follow the prescribed steps. Instead, quit the installer, restart the Mac, and an Apple software update will appear after restart. Install that software update, and even though the computer and software do not call for it, restart the Mac again. Only then add the printer and follow the balance of the steps. It works! Thank you for your help.

I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides screen is ok. Is there a way around it? :(

I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides the screen is completely fine-the screen will not recognize my finger anymore. I am not trying to fix the phone, but I need to have my contacts. The pictures have already synced, but I need my password to do a full backup. Unfortunately, I can't type in my password. Is there any way around it? If I take my phone to the apple store, will they be able to help me? I am not willing to replace the screen just to do this, however, so that is out of the question.

Someone else may have a workaround, but, as far as I know, if you cannot interact with the screen on the iPhone, there is no way to unlock it so you can get to your contacts.
Were you saving them to iCloud by chance? If so, you can restore them to your new phone.
~Lyssa

After update Mac OS 10.9.1 Trim Enabler does not work anymore!

After updating from Mac OS 10.9.0 to 10.9.1 the program Trim Enabler does not work anymore and my 4 SSDs from Samsung and Kingston are no longer supported.
What can I do?
Should I scrap my SSDs?
Why does Apple do such things?
Will Apple that I switch to Windows? There Trim works with all SSDs and BluRay will not boycott!

Apple does not support TRIM for SSDs that were not factory
installed and TRIM Enabler is a hack to get around this. Any
hack is always subject to being disabled, or worse, with any
system update whether it is OSX or Windows.

Mac os 10.4.10 software update problem -- my mac does not work anymore :(

hello!
i have a powerbook G4- PPC. just today, i did a software update of my OS to 10.4.10 (it was the available update version according to the automatic uptae) and during the final stage of the installation, it says "a problem was encountered...installation package is moved to trash"
when i browsed my mac, my apps does not work anymore!!! they just bounce from the dock when i clicked it but it won't open any window. i emptied the trash and restarted my mac but sadly, it just boot but won't continue to the log in part, only in the silver window with the apple logo and mac os x tiger... and the mouse just turns into the color wheel. i waited for 30 mins and nothing happened.
i don't have a startup disc because the mac is a gift and it was long time ago. is ther a software i can use to fix or revert the changes of the unsuccessful OS update? why is there always a problem when i do OS update? isn't apple software stable?
My mac problems' driving me crazy!!!

There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695

Keynote remote function does not work anymore

Similar Messages

Maybe you are looking for