Knockout Issue...still stumped!

Hi again,
I wanted to post this again to see if anyone can help me out with this.
I am trying to print film for a screen printing job that I am doing and so I need all of the white you see in the image below knocked out to the background color (i.e. color of the shirt).
The way I have this set up is a layer of text with a black stroke in the back and a layer of text with no fill and a white stroke on top.
I have tried over and over again as per my own methods and suggestions from others:
http://forums.adobe.com/thread/1031339
I haven't been able to get this done! It's killing me here...
Please take a look at the image and see if you can help me out!
If there is another way I can set it up other than the text layerd on top of each other or ANYTHING else you can suggest to help me out it is MUCH appreciated.

You mean like this?
It's easy. In photoshop (and yes, this is more of a photoshop question rather than a type question) If you have the text on a layer above the background (green) temporarily change the background to black. So you just have white text.. Select all and copy merged. Undo the black from the background so it's how it was.
Above the text create a new layer. Fill it full of green. Create a new layer mask, paste in the black and white image we just copied as the layer mask. That'll give you the "green" area in white. You'll need to clean up the masking by turning the white text to black. But that's pretty much it. Hope this helps

Similar Messages

Camera issue still exists in AIR 16 beta

Just tested my simple camera tester with Air 16 Beta and the issue still exists.
Im refering to the issue were the camera stops responding after a number of attaches/detaches to a video object and if attached multiple calls to setMode.
The issue im referring to is Bug#3850401 - Handle leak with video.attachCamera leading to inoperable camera

Just tested my simple camera tester with Air 16 Beta and the issue still exists.
Im refering to the issue were the camera stops responding after a number of attaches/detaches to a video object and if attached multiple calls to setMode.
The issue im referring to is Bug#3850401 - Handle leak with video.attachCamera leading to inoperable camera

"I did fresh restore, reset all setting and reboot the issue still there. I hope Apple don't forget us to solve this issue soon

"I did fresh restore, reset all setting and reboot the issue still there. I hope Apple don't forget us to solve this issue soon

Oh I've found it meanwhile! The is a 2nd post! So never mind this one! I think lawyerhusain understood he has to let Apple know, if he wants them to know and the technical thing will continue with the 2nd post!

I want to resolve the payment issue still pending .But I do not understand what issue remains to be resolved by me ? Unless I know the details of it how shall I resolve it

I want to resolve the payment issue still pending .But I don't know what issue remains to be resolved by me? Unless I know the details of the issue how shall I resolve it

Apple is not here. Apple does not answer questions here. This is a user to user tech support forum, no ne here would have any knowledge of your personal account details or a financial dispute that you may have with Apple.
Mac App Store Support -
http://www.apple.com/support/mac/app-store/
iTunes Support -
http://www.apple.com/support/itunes/

Firefox continues to have"Not Reponding" issues. Upadated all plug-ins and disables most of them but issue still occurs, often.

Firefox continues to have"Not Responding" issues. Updated all plug-ins and disabled most of them but issue still occurs, OFTEN.

Thank you for your reply,
I know that plugins aren't being outright disabled and that people need to be encouraged to keep up to date, it's just that there's a lopsided amount of focus on them as a security vector from Mozilla.
I must point out however, that javascript security at the moment seems to consist of an on-off switch on almost every browser in existence: there is no obvious way to set "I don't want that site to know where my mouse is for my privacy", "I don't want that site to dynamically load content because it slows my browser" or the sort.
While there is CAPS ( http://www.mozilla.org/projects/security/components/ConfigPolicy.html ) it is not configurable from within the browser (and its existence at all is obfuscated) and considering a lot of javascript is obfuscated to discourage run-time modification (say using web development toolbars) or discourage CAPS usage, there's little way to know what exactly to use CAPS on without reverse engineering. The average user would not be able to do this.
Javascript security needs to be more, much more than an on/off switch.

X-Fi Titanium PCI-E x1 and known UT3 OpenAL issue still not fixed!!!!!!!

Dear creative support... wtf is this?! This issue is known since so looooooong time, as i've read at other forums fixed with all other x-fi sound cards but with not my one. Installed yesterday latest beta driver, day before yesterday i've been using stable 2.7.0008 driver and with both versions i got this **bleep** annoying crash.
I want to remember to you issue details: random crashes of game during play it with ingame OpenAL enabled.
I have 5. speakers set and i want to play the game with surround audio, i can get it only by enable OpenAL in game menu so do not even try to suggest to me to disable OpenAL!!! I tried many known "fixes" and workarounds, using latest versions of driver but issue still happens to me.
IF this issue will not be fixed i will buy asus xonar asap, temporary i just have no money to buy new sound card. Gi've me driver fixing this issue, ffs!!!!!!!!!!!!
Here is full PC configuration:
AMD Phenom II x4 B35 2,9GHz
Palit Radeon HD3850 52MB GDDR3 PCI-Ex
Creative X-Fi Titanium pci-e x
3xGB Kingmax DDR2 066MHz
Gigabyte GA-MA785GM-US2H

This is the only game with which i have a problem.
I contacted with support via email form, they suggested to me to contact with game's customer support i did so and waiting for answer from them.
Creative support in answer said that this issue happens not only with creative x-fi products but unfortunately it's not true. In many forums problem were analysed by users and result is one: x-fi users only are facing this issue. Also before i bought card i've been playing long time ut3 with integrated realtek sound card and there was no problem with enabled openal, it shown up when i bought and installed x-fi titanium sound card.

Tricky Exchange 2013 send issue - im stumped...

Hi everyone,
I ran into an issue this morning in my Exchange 2013 SP1 environment today that has me stumped. Like most issues, it just happens. No changes, patches or updates to the system were applied and the system was normal until now. Here is my problem –
My Outlook users have their own mailboxes, and my company has a Help Desk email box that has its own user account. My users are set up via Exchange / Outlook to have their own mailboxes and full access to Help Desk mailbox in their Outlook .
Each Outlook client in configured with the users account, and the Help Desk account because users want to be able to hit the FROM button in Outlook and chose whether a reply comes from them personally or the Help Desk mailbox. This has worked great,
up until now.
All of a sudden, you cannot send from the Help Desk account anymore. The mailbox opens up, a user can see and access all the mail and it is receiving email fine. But if a user wants to reply or create NEW email, choses FROM and uses the Help Desk account
they get this error on sending
Sending reported error (0x8004010F) Outlook data file cannot be accessed.
The users regular account works fine.
I recreated the mail profile, didn’t help the issue. I checked on OWA and if you access the Help Desk account on its own it sends fine.
If you create an email from your own email account and CC the Help Desk, it sends fine.
All users have Full Access permission and Send As permission on the server.
Nothing has changed that I know of and this worked totally fine for almost a year until today, it just stops working.
Any ideas, I’m totally stumped… I have to apply CU7 still this weekend, maybe that will do something. But as of now I cant even see any real errors as to whats going on here.
Ric

Hi,
In your case, please check the autodiscover and OAB by using "Test E-mail AutoConfiguration".
If autodiscover fails, please troubleshoot the autodiscover by directly accessing the autodiscover url via IE and let me know the error code. If autodiscover works, you need to troubleshoot the OAB generation, publishing and downloading issues.
For OAB generation and publishing issues, you can check the application logs on the CAS and Mailbox servers. For the OAB downloading issue, you can manually access the OAB url via IE and see if there is any error code.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Is the slow SATA HD issue still unresolved in latest Bootcamp?

an earlier post by kkapoor indicated lack of support for SATA drives in Win XP, and indicated a fix to a now dead web site. Is the slow SATA still an issue? Will it impair running games in Windows mode( the only use I have for Windows)?

I believe this issue was resolved by the Mac Pro SMC Firmware Update.

Finder issues still exist in 10.9.2

Whenever I updated to 10.9.1, I had issues in Photoshop and other programs when I tried to open files from within them Finder would take about 30 secs to populate the list of files on my computer. 10.9.2 fixed that but now I'm having a different Finder problem. When I use Flash builder and import a project, it imports the first one fine but when i go to import a second project, I hit Browse to find the file I need and when it pops up it shows me an empty Documents folder which is not empty on my file system and I switch to Desktop, it populates my finder with the files on my desktop and when I go to select the project, the dialog box for Finder closes but my file doesn't load into Flash Builder so I can't import it. If I close Flash Builder and try again it will let me import one project and then will not let me load in a second one.
I'm using a late 2011 MacBook Air
Here's a list of what I've done to try to fix it:
- Uninstall Flash Builder, reinstall Flash Builder
- Uninstall Creative Suite, reinstall Creative Suite
- Delete Harddrive contents and reinstall OSX Mavericks
- Delete Harddrive contents and install OSX Mountain Lion, this fixed it and I had no problems using Flash Builder which is why it's something specific to Mavericks
- Updated from Mountain Lion to Mavericks and tried again but the problem still persisted
- I tried it on a MacBook Pro I have and it works fine

Sometimes this issue is caused by a misconfiguration or incompatibility of the Exchange server, or perhaps by a bug in Mail. If so, you won't be able to resolve it yourself. The fact that your iOS devices may be working well with the same account isn't relevant, because iOS uses a completely different protocol (ActiveSync) to communicate with Exchange servers. By default, OS X Mail uses the EWS protocol.
Each of the following steps has been reported to help, at least temporarily, in some cases (not all):
1. Back up all data. Open the Internet Accounts pane in System Preferences and check to make sure you don't have duplicate Exchange accounts. If you do, delete all but one of the duplicates. If there are no duplicates, delete the account and recreate it with the same settings.
2. Rebuild the affected mailbox.
3. Reindex messages.
4. Follow the instructions in this support article to disable autodiscovery. You may need to get configuration details from the server administrator.
5. In the Keychain Access application, delete the password item for the account. The next time Mail tries to access the account, you'll be prompted for the password. Check the box to save it in the Keychain.
6. If you've created subfolders of the Exchange inbox, log in to the server through its web interface, move the messages out, and remove the subfolders. The inbox should have no subfolders.
7. Synchronize with the server using IMAP rather than EWS. This is only possible if IMAP is enabled on the server.
8. Consider using Outlook instead of Mail to access your Exchange mail. It uses yet another proprietary protocol (MAPI) that isn't available to other mail clients.
See also this discussion.

MSI R4830 OC : The exploding capacitor issue still continuing?

For reference, my system spec:
MSI 790FX-GD70 mainboard
AMD Phenom II X4 955 BE
4GB OCZ Platinum 1600MHz memory
MSI R4830 OC graphics
1TB WD & 500GB Seagate harddrives
OS: Windows 7 Ultimate
System isn't overclocked and has never been.
The story...
Today after doing a bit of gaming (WoW) all of a sudden my computer BSOD'ed and after the auto-reboot of W7, the bios gave me an error notification saying: "a hyper transport sync flood error occurred on last boot. Press F1 to continue". After just continuing Windows booted fine and I was able to run the regular programs without any issues. Wanting to continue gaming, I again started WoW, and even before I got into the login screen, windows BSOD'ed again, after which the bios again came back with the hyper transport sync error.
Doing some research on the error, I came to a conclusion, that there apperently are many reasons why it occurs, but no single sollution to solve it. So I just continued, let my computer be for a moment, and idle'ing it for a couple of hours. During that time no issues at all.
Until about an hour ago... I wanted to try to get WoW started again and amazingly it did, without crashing. Until I was in the game for about 5 minutes and then the computer did NOT BSOD this time, but immediately did a full powerdown. Trying to power it up again after that failed, after taking the PSU of the mains and plugging it in again, the system would "turn on" for less then a second and immediately powered down again.
Time for some hardware inspection then. Took of the harddrives & dvd (power & sata) to no avail. The system would still only "turn on" for less then a second. Next to be taken out was the graphics card (MSI R4830 OC), after removing it the system would turn on again and stay on this time. So there it was... some sort of failure in the graphics card. After powering down again and inserting the graphics card again and then again trying to turn on the system, back to the previous situation where it would only "turn on" for less then a second.
This made it obvious that there was only a single cause to the entire situation and that's the graphics card.
After inspecting the graphics card I noticed the following:
(Click to see a larger version of the photo)
Note the upper most capacitor, it was bloated and had been leaking. Off all the capacitors on the board (most of them are solid-state caps, only 5 classic caps) this the only one that burst.
Seeing this immediately makes me remember the situation we had about 8 years ago, with exploding capacitors all over the place (I have seen much of my hardware in those year fail due to exploding caps): http://en.wikipedia.org/wiki/Capacitor_plague
Considering the location of the capacitor near the power connector of the board, I suspect the capacitor to be related to handling the power supply from that connector. If that is the case, most likely the board might not receive (enough) power from the PSU to power the board, causing the PCI-E power usage to run to high, in turn causing the mainboard to turn of for safety.
How long this capacitor has been blown I don't know, but I wished I would have noted earlier. Until today everything worked fine, but it could very well be this cap was already blown for months.
As a final question, has anyone else recently had any exploding capacitors on MSI products (and I'm not talking about hardware from the problem era, but rather the more recent hardware, in which the capacitor issue should have been solved long time ago)?

The card is produced early 2009, so technically from the period after the issues there were with the bad Taiwanese caps. Out of the 15 caps on the board in total, 10 are solid-states and only 5 are still the old electrolyte ones, of which one obviously blew.
And indeed I am aware of what they are used for and what issues they cause if they go bad. Have seen approx. 20-30 motherboards & another 10 graphics cards fail due to exploding caps during the time where the issue arose with the stolen electrolyte. (Luckily only a few mainboards were actually mine, but had many friends and family members with the issue).
This is the first time I've seen the issue come up since around 2008 when an old socket 7 board blew which was owned by a family member.
I do wonder though how the unstable graphics card is related to the "hyper transport sync flood error", if at least this blown cap is the one and only reason my system BSOD'ed.

Boot Camp Partition issue (still on OS X 10.4.8)

Hi all,
I'm trying to get Windows 7 up and running on my 2 year old MacBook Pro. Just bought the full version of Home Premium, as I've never installed any Windows on my mac before. Also, I haven't gotten Snow Leopard yet, so I'm still on OS X 10.5.8, which I think means a slightly older Boot Camp.
So I go in to Boot Camp Assistant and try to partition my 50 free gigs into about 20 for windows and 30 for mac. Trying several times, it always comes up with the error "The disk cannot be partitioned because some files cannot be moved" and says I should back up my disk, make sure it is formatted as OS Extended (Journaled), and restore the disk from the backup. This is the part I don't know how to do exactly. Is it saying I have to basically wipe my HD and restore it from my external HD? Under restore in the Disk Utility I can drag my external drive into the "source" box, but can't put my mac HD in the "destination" box.
So, anyone have any tips on how to move forward with the partitioning? Is it merely a space issue like I think, or is it a larger problem having to do with not being on Snow Leopard yet? I appreciate any advice or suggestions, I'm sick of spending so long trying to figure this out, haha.
Thanks!

I wish Apple would expand their own tutorial. The Boot Camp pdf; the FAQ; but it can be done with your OS X DVD and Apple Disk Utility's Restore; with other programs that are free, but require (essential to my thinking) that you have another drive or partition that you can boot from.
Windows and you have rescue CDs. With a Mac you can have and boot OS X from multiple hard drives.
Install OS X to drive #2 and use that to erase and restore.
TimeMachine is 'okay' but you can't boot from it. And I've got to say a bootable backup is more important tool.
The two most popular are Carbon Copy Cloner
http://www.bombich.com or from http://www.macupdate.com
SuperDuper from Shirt-Pocket Software, free for full copy, $29 for smart update of backup. Great PDF and of course no one looks to use the Help menu in programs (like Disk Utility even).
Those backups can be important and handy to have before installing any Mac OS update.
And there should be some 'Stickies' or "Most Popular Threads" or something because this question has been at some times a daily topic.

Gray screen issue still in Reader 11.0.03

Hi, it sounds like the PDF gray screen issue mentioned here: http://helpx.adobe.com/acrobat/kb/pdf-opens-grey-screen-browser.html
has been fixed in 10.1.3. Has it been fixed in 11.0.03? I have the latest Xi version installed and am still experiencing this problem.

Hi, C F McBlob,
Thanks for the help and the suggestion. I turned on Compatibility View in IE and I still see the gray screen. The ActiveX control should take the same setting that I've set in the browser, right?
Also, shouldn't it be an Adobe issue rather than an IE issue if the exact same setup works with Adobe 9?

[GeForceFX] PS FX 5200 Capture Issue - Still

"I am using NVIDIA FX5200 PERSONAL CINEMA V128 on WINDOWS 2000,
and i am getting the following error when i try to capture video
WinDVR
Overlay in not available
lower resolution, color depth &/or refresh rate
or enable video mirror if using twin view clone/extended mode
I have tried lowering everything but still get the error
What is overlay? ?("
I'm having this same issue. I've heard the included software is the cause (read below) and I replaced it with Ulead software and get the same error message.
My Box is an Intel P4 2.2 on an Intel 8x MB with 256 MB DDR using Windows 2000 Pro V5. Directx 9.0b.
I'm contacted MSI and they said to wipe clean the install and reinstall 6.1.7.7 drivers. Did that. No change, same error.
So before I recommend to the entire world not to buy MSI products, I'd like an actual solution. I see it works for other people.

I purposely didn't include my 3DMark03 results on account of how sorry they were!!!lol_anim:
The best score I could acheive was 1,517 3DMarks.
The fact that these benchmark game's framerates are so crappy is odd, since I can play most current games with nary a problem.
(except for the aforementioned Halo)
Medal of Honor, UT2003, Unreal II, Jedi Outcast, Splinter Cell, etc....
Oh well....
OOPS!!!!
**I was mistakenly benchmarking with 3DMark2001 (Build 200) before**
This was the reason for my score of 9,160 3DMarks.
Sorry for the bad info!
My 3DMark2001SE (Build 300) scores are as follows:
7,884 3DMarks - Stock CPU/FSB/RAM (133Mhz x 10.5)
8,666 3DMarks - Overclocked
BTW, thanks for the tip Jbaroli.
I can in fact increase all my overclocks, but I find that my current settings achieve the best balance of stability and video quality for me.
On the other hand I have a whole host of ideas for better cooling that should allow me to squeeze out some more performance!!!
AMD Athlon 1700+ (JIUHB o'cd to 2.1Ghz 183x11.5)
MSI KT3V (BIOS Tweaked to MAX!!!)
Corsair PC-2700 512MB (o'cd to 366Mhz)
MSI FX5200 TD128 (GPU o'cd to 286Mhz RAM o'cd to 542Mhz)
Western Digital 40GB 7200RPM 8MB
Lite-On 48x CD-RW
Antec 350W PSU
ThermalRight AX-7 Heatsink
ThermalTake SmartFan 2
Artic Silver Ceramique
Windows XP Home (Not completely tweaked for gaming, but some....)

Preflight panel issues. still.

CS4 6.03. MAC.
When I turn on preflight on it continuously checks the entire document. The list goes grey to black every 2 seconds (see attached screen grabs) and while it's grey, I can't choose anything because it's "checking". I'm assuming it's constantly updating the info but it's really, really annoying that it does this every 2 seconds. Is there a way to stop this from happening?
It does the same thing on both my custom setting and the basic one.
How do I stop it from continuously checking the entire document every 2 seconds. Is there a timer setting I can change somewhere?
Is this just a software glitch?
Thanks for any help you can give me.
Tracy

MAC OS 10.5.7
Dual 2 GHz PowerPC G5
1.5 GB ram
I could just leave it off, but that still doesn't solve the problem. Plus, while I'm checking each error, I have to wait for it to stop checking before I can even click on the item. The flashing thing is super annoying.
Also, I'm currently working on a 4 page document but If I have one that is 20+ it could take forever to "check" the file, thus having longer than 2 second intervols where I can click on a item.
Does this make sense? It's very frustrating. I can't believe no one else has seen this issue.
Again, thanks for keeping on this issue. I really appreciate it.
tracy

Signal Quality issues - totally stumped

My first post so apologies if I step on anyones toes.
I've had a browse through and can't find an existing post that covers my scenario.
For a while now my box has been having issues on certain channels. The exact scenario is that the signal quality drops to below 25% which causes picture blocking / freezing.
Before anyone says its a MUX issue, I have tried.
1) New cables
2) Rebooting
3) Factory reset
4) A known good cheapie freeview receiver from Asda shows a static 95% quality on the channels where the BT Vision box has problems. With both the old and the new cables. No signal bouncing - stays solidly at 95% (or thereabouts)
The specific channels it has issues with are Channel 21 (VIVA),Channel 38 (quest +1). I am on Waltham transmitter and other channels on the MUXes have 85% quality and higher on the BT Vision box. On VIVA and Quest +1 the quality bounces all over the place between less than 25% upto 87%.
If it was all channels on the MUX then I'd know it was time for aerial reposition, but with it being on only specific channels and a cheapie receiver working perfectly I'm a bit stumped??
Additionally, since the new firmware, I use a 4:3 TV through SCART and the screen real estate now seems wrong as it chops the bottom off the screen when in the new menu system - so things telling me what to press are lost - ie: to delete a recording from the recordings section I can't see any advice at the bottom of the screen as was there on the old firmware, I basically found it was the red button by trial and error. I'm guessing BT think we all have HDMI TV's and maybe the menu works OK on HDMI.
Its as though the tuner has just decided it doesn't like channels 21 and 38 - maybe its telling me to to watch some better quality programs... Or more seriously, maybe its cooked and has a specific frequency reception issue? Unlikely but I can't think what else it could be.
If anyone can advise I'd appreciate some guidance as I've pretty much exhausted my limited knowledge of TV transmitter behaviour.
Pete

Hi Pete65,
It could be possible that if you are in the Northampton/Milton Keys/ Bedford/ etc areas, that particular mux could have some signal interference .
There was a post earlier which I can't find right now, where the author talks about signal quality vs signal strength.
It could also be possible that the signal is too strong which could cause a detrimental effect on the quality.

Knockout Issue...still stumped!

Similar Messages

Maybe you are looking for