LabVIEW Support for Innovation Integration X5-210M

I was wondering if anyone here is using Innovation Integration X5-210M module: http://www.innovative-dsp.com/products.php?product=X5-210M
and was able to interface the acquired data with LabVIEW.
Their support is only in the form of C++ libraries and an example program. They also suggest, in a very general way, how to create a DLL for LabVIEW: http://www.iidsp.com/forum/viewtopic.php?t=549
I am having a hard time trying to put it together. If anyone has found a solution, I appreciate it if you guide me in the right direction. Please be specific.
Thanks.

Ghulam-
Take a look at this link:
http://decibel.ni.com/content/docs/DOC-2028 this is an example on running a C DLL in LV but the architecture should be very similar to making a C++ version. Let me know if this helps! Happy Presidents Day!!
Sam S
Applications Engineer
National Instruments

Similar Messages

LabVIEW support for beagleboard

HI,
I would to know if there is any LabVIEW support for beagleboard.
Currently am trying to possibilities of working with this on LabVIEW.
Do get in touch if anyone has worked on them earlier.
Sundar.

Super-scalar ARM Cortex TM -A8
512-MB LPDDR RAM
High-speed USB 2.0 OTG port optionally powers the board
On-board four-port high-speed USB 2.0 hub with 10/100 Ethernet
DVI-D (digital computer monitors and HDTVs)
S-video (TV out)
Stereo audio out/in
High-capacity microSD slot and 4-GB microSD card
JTAG
Camera port
Beagle Board Hardware Spec
Attachments:
BeagleBoard.jpg ‏149 KB

Labview support for ISO 8859-5

HI,
does Labview support ISO 8859-5 character sets?
If yes, then how do i change the default character set in Labview from ASCII to ISO 8859-5?
If no, then which is the simplest way to display russian characters in Labview 6.1 (Labview 6.1 on SuSE LINUX)
Thanks and Regards,
Pavitra

Hi Pavitra,
There is a very easy way to do that in Windows. Start>Settings>Regional and Language Options. Make sure Russian is included as an input language language on the language tab, as well as on the advanced tab where you can specify the language for non-unicode programs.
I have attached a screenshot that demonstrates cyrillic fonts in LabVIEW. The example is done with Bulgarian font, but it should work the same way with Russian. As you can see I have also specified Arial CYR as my font for the front panel and the block diagram.
Try to use the same logic for a Linux system.
Hope that helps!
Kalin T.
National Instruments
Attachments:
cyrillic.jpg ‏51 KB

Satellite Pro L300 - OpenGL 2.0 support for Intel Integrated Graphics

Just want to share the news that I was able to install the new Intel Chipset drivers that add OpenGL 2.0 support to their integrated graphics chips, such as the X3100.
This driver was released in December 2008 and even though Intel recommends waiting for OEM versions from Toshiba, I decided to try theirs.
Links and more info are found in this thread:
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProductID=2800&DwnldID=1722 0&strOSs=All&OSFullName=All%20Operating%20Systems& lang=eng
This new driver is for all laptops with the following chipsets:
Intel(R) G31 Express Chipset
Intel(R) G33 Express Chipset
Intel(R) G35 Express Chipset
Intel(R) G41 Express Chipset
Intel(R) G43 Express Chipset
Intel(R) G45 Express Chipset
Intel(R) Q33 Express Chipset
Intel(R) Q35 Express Chipset
Intel(R) Q43 Express Chipset
Intel(R) Q45 Express Chipset
Mobile Intel(R) GL40 Express Chipset
Mobile Intel(R) GL960 Express Chipset
Mobile Intel(R) GLE960 Express Chipset
Mobile Intel(R) GM45 Express Chipset
Mobile Intel(R) GM965 Express Chipset
Mobile Intel(R) GME965 Express Chipset
Mobile Intel(R) GS45 Express Chipset
Maybe someone will try the exe file installation and report back -
I followed the manual installation instructions and for now everything works fine.
Message was edited

Hi mate
First of all thanks a lot
Ive got a U400 and I have installed a Intel graphic card driver from the Intel page too.
I didnt execute the exe file but I updated my driver in device manager.
This worked fine.
Also I read here in the forum that drivers from external pages can be used only at the own risk because such drivers are not tested and not certified by Toshiba
However, my U400 run trouble free till now.

Labview Drivers for an Integral Tech Framegrabber

My company is interested in purchasing a video inspection system that
uses the following frame grabber:
http://www.integraltech.com/art/downloaded%20from%20current%20site/fbmv/documents/fbmvlitespecsheet.pdf
Integral Tech does not make Labview drivers for this card.
Would there be a way to get these written, or would that be cost
prohibitive ?
Thanks for any suggestions.
Rick B.
Email: Use Yahoo instead.

Hi Rick,
I'm not really sure whether this is what you're thinking of but...
Since INTEGRALTECH provides a VFW driver for their frame grabber you could,
e.g., use this tool from aNI server:
http://exchange.ni.com/servlet/com.quiq.servlet.GetObject/lv_vfw.zip?KEY=101
..97.12134.14&SIG=101.97.12134.14&EXT=mime:application/x-zip-compressed
It works very well but, like any VfW based application, has the disadvantage
of being able to read out only one camera at time. If you plan to use
multiple frame grabbers simultaneously you have to find a different
solution.
It should also be possible to call the DLLs INTEGRALTECH provides from
LabView.
Best regards
Arno
"Rick B." schrieb im Newsbeitrag
news:[email protected]..
>
My company is interested in purchasing a video inspection system that
> uses the following frame grabber:
>
>
http://www.integraltech.com/art/downloaded%20from%20current%20site/fbmv/docu
ments/fbmvlitespecsheet.pdf
>
> Integral Tech does not make Labview drivers for this card.
>
> Would there be a way to get these written, or would that be cost
> prohibitive ?
>
> Thanks for any suggestions.
>
>
> ---
> Rick B.
> Email: Use Yahoo instead.

Microsoft support for unix integration systems

I have been told that Microsoft has stopped supporting any integration between Unix and Active directory in case that integration makes any modification to the AD schema. Is that true?

Hi,
Depends on your version and what you what to achieve
These five states a possible and supported
UNIX clients use Active Directory Kerberos for authentication but continue to use an existing UNIX-based data store for authorization.
UNIX clients use Active Directory Kerberos for authentication and use Active Directory LDAP for authorization.
UNIX clients use Active Directory LDAP for both authentication and authorization.
UNIX and Windows infrastructures remain separate: UNIX clients use UNIX-based Kerberos for authentication, Windows clients use Active Directory Kerberos for authentication, and a cross-realm trust enables UNIX and Windows users (if the cross-realm trust
is a two-way trust) to access services in the other side.
more info is available here
Authenticate Linux/Unix to Active Directory
- The Windows Security and Directory Services for UNIX
Support has "always" been officially non-existing for 3.party modifications to the schema.

LabView support to SAP integration

I would like to know how to integrate my LabView application to SAP system. Are there any standard VI's to achieve the same.
Regards
Naveen

Search the forums for Database Connectivity Toolkit. Also LabSQL, for some ways to do this.

LabVIEW DSP Test Integration Toolkit support for Code Composer Studio version 4

Hi,
I came to know about the LabVIEW DSP Test Integration Toolkit support for Code Composer Studio from the link http://zone.ni.com/devzone/cda/tut/p/id/5839. I would like to know if this works with Code Composer Studio version 4 also. I am using CCSv4 with TMS320C6748 board. If not, can you please tell me if NI has brought out any software that helps in real time data exchange between CCSv4 and Labview?
Regards,
Debarati.

Debarati,
I did some more research into your issue and found out that unfortunately, NI no longer officially supports the DSP Test Integration Toolkit as seen here: http://zone.ni.com/devzone/cda/tut/p/id/5839
I also see that you located our example VI here http://zone.ni.com/devzone/cda/epd/p/id/4311 and that the VI asked you for a .pjt file that you could not locate in CCSv4. Being that we no longer support the DSP Test Integration Toolkit, your next course of action would be to contact TI and inquire what .pjt file corresponds to in the newest version of CCS. I hope TI can be of more help to you with this issue since, as I said before, we no longer support this toolkit.
My apologies,
Larry H
Applications Engineer
National Instruments

NI-DAQmx support for labview could not be found

Hi, I am pretty new to LabView. I was using VC++ to programming for my USB-6215. Just curious how LabView works, so I try to follow the "Introduction to Taking an NI-DAQmx measurement in LabView" and configure my USB-6215 in LabView. However, when I try to gererate codes for the DAQmx task name control, an error message pop up as "Error:NI-DAQmx support for labview could not be found. Please reinstall NI-DAQmx". I did reinstall NI-DAQmx, but it doesn't help. This error occurs anyway. Any idea how it happens and the solution is highly appreciated. Thank you.
Jingyu

See attached
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA
Attachments:
MX picture.PNG ‏35 KB

LabVIEW RT driver support for CEI-620?

Hi All,
I am using PXI-8106 to run heavy-duty communication and one chasis holds the CEI-620 card (third party ARINC429 card from GE, formerly Condor Engineering). Currently on the PXI controller only runs LabVIEW RT (Pharlap) since I did not want to install Windows OS to slow the performance. Now here it is the problem, GE does not provide LabVIEW RT driver support for CEI-620 (they do have LabVIEW RT support for CEI-830 though, but that card is PMC interface). Basically right now MAX can not recognize the CEI-620 card on the host side, and I can not deploy my ARINC429 application VI to the target PXI controller. I am wondering anybody here has encountered the same problem and develop the LabVIEW RT driver for CEI-620 on his own?
Thanks.
Martin Ding
Senior Project Engineer
S-TEC Corporation

Hi,
Unfortunately I don't have much more information to offer. I would suggest checking to make sure you have all the correct device information whe you create the ini file. I think you should still be able to develop a driver for a poll based device. It should be easier to generate an ini file if you do not require interrupt information. Make sure you have the correct identification information and try using the VISA Driver Development Wizard again.
Eric A.
National Instruments
Distributed I/O Product Support Engineer

[svn:fx-trunk] 10963: Integrating latest FXGUtils that removes support for format to reflect FXG 2.0 final specification, as well as corrected bounds calculations, including corrections for stroke width.

Revision: 10963
Author:   [email protected]
Date:     2009-10-09 16:19:35 -0700 (Fri, 09 Oct 2009)
Log Message:
Integrating latest FXGUtils that removes support for related test as that has been removed from FXG 2.0. The updated bounds calculations mean that bitmap compares for stroke related tests will need to be updated.
Doc notes: None
Bugs: N/A
Reviewer: Min
Tests run: Checkintests, mustella spark/core/fxg (bounds change tests were excluded)
Is noteworthy for integration: Yes, this includes corrections to bounds calculations and thus changes rendering.
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/fxg/FXGCompiler.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/fxg/FlexFXG2SWFTranscoder.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/StandardDefs.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/fxg/FXGConstants.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/fxg/FXGException_en.properties
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/fxg/swf/FXG2SWFTranscoder.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/AbstractFXGNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/AbstractShapeNode.jav a
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/CDATANode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/EllipseNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/GraphicContentNode.ja va
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/GraphicContext.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/GraphicNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/LineNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/MaskableNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/PathNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/RectNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/RichTextNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/TextGraphicNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/TextNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/fills/BitmapFillNode. java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/AbstractRich BlockTextNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/AbstractRich ParagraphNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/AbstractRich TextLeafNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/AbstractRich TextNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/DivNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/LinkNode.jav a
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/ParagraphNod e.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/TCYNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/strokes/AbstractStrok eNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/text/AbstractTextNode .java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/types/FillMode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/sax/FXG_v2_0_Handler.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/swf/ImageHelper.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/swf/ShapeHelper.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/swf/TypeHelper.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/types/FXGMatrix.java
Added Paths:
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/TextHelper.j ava
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/TextLayoutFo rmatNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/TextProperty Node.java
Removed Paths:
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/FormatNode.j ava
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/LinkActiveFo rmatNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/LinkHoverFor matNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/LinkNormalFo rmatNode.java

JDBC Thin Driver Support for Data Encryption and Integrity

Hello JDev Team,
I am trying to implement JDBC Thin Driver Support for Data Encryption and Integrity.
It works fine with java.sql.Connection and java.util.Properties like in the following code:
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Properties props = new Properties();
int level = AnoServices.REQUIRED;
props.put("oracle.net.encryption_client", Service.getLevelString(level));
props.put("oracle.net.encryption_types_client", "( RC4_40 )");
props.put("oracle.net.crypto_checksum_client",Service.getLevelString(level));
props.put("oracle.net.crypto_checksum_types_client", "( MD5 )");
Connection conn = DriverManager.getConnection ("jdbc:oracle:thin:@localhost:1521:main", props);
etc...
But I am developing an application with InfoSwing components and it has a different way to connect to Oracle database using oracle.dacf.dataset.connections.Connection, like this:
sessionInfo1.setAppModuleInfo(new ModuleInfo("bc", "BcModule"));
sessionInfo1.setConnectionInfo(new LocalConnection("JDBCThin"));
sessionInfo1.publishSession();
My question is:
Is there any way to implement DataEncryption and Integrity into this type of connection?
Thanks a lot in advance.
Victor Bykov
null

Victor,
No, you can't do this from DAC, but I've been discussing it with the developer, and we both think this capability would be useful to have, so I've logged it as an enhancement request.
I do have a question for you. Once you've made the JDBC connection, do you need access to the Connection object afterwards? We're thinking of how the change could be implemented, and one way would be to allow you to pass in a Properties object when creating your own NamedConnection.
Thanks
Blaise

Email profile support for Samsung Android (KNOX) devices in integrated environment of SCCM 2012 R2 and Microsoft Intune

Hi,
I could see that lot of TechNet articles are being updated recently with the information on Samsung Knox.
Tried to check the email profile configurations in the SCCM console, could not find Android platform in the supported platforms.
I could see this option available when I login to the admin portal of Intune. Can any one confirm if the extension for enabling email profile support for Samsung Kiosk devices id released or planned to be released.
Regards
Leela

Configuring email profiles on Andriod devices is not yet supported via ConfigMgr integrated with Intune, see also:
https://technet.microsoft.com/en-us/library/dn554226.aspx
It probably will be in the future, but there are no dates available yet.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

I was just told by a Lenovo CS rep that the W520 doesn't support 6Gbps for "data integrity" reasons

The main HDD bay in my W520 drops from 6Gbps to 3Gbps shortly after boot. The speed drop is triggered when I start to pass data over the port. I can take the same drive (Vertex 3 240GB) and put it in the ultrabay and I get full 6Gbps speeds. It seems pretty obvious to me that this is a problem with the SATA controller on the laptop's motherboard (my specific laptop, not the whole run; other prople have the same drive with no issues), but after arguing with Lenovo support for over a week now, a customer satisfaction rep just sent me this email:
"I was able to confirm with are technical support that SSD transfer rate for the W520 ThinkPad is 3,0GB/s (chipset has the capability but we limit it for data integrity). So, your system is working as designed.
One bay for removable devices, Ultrabay Slim-compatible, 12.7mm high, bottom access
Some: Solid State Drive (SSD) / SATA 3.0Gb/s, 2.5" wide, 7mm high
Some: HDD / SATA 3.0Gb/s, 2.5" wide, 7mm or 9.5mm high, Active Protection System™
All: removable, upgradable, supports the second disk, Shock Mounted Hard Drive"
(w/ a link to this: http://www.lenovo.com/psref/pdf/tabook.pdf)
Obviously, these numbers refer to the speeds of the drives that Lenovo sells, not the speed that the port itself is capable of. Additionally, there are dozens of people that have confirmed that the main bay is capable of 6Gbps speeds. I also confirmed this with several sales reps before I purchased the laptop.
How should I handle this? He is going to have his tech support people call me back tomorow, but I seriously doubt they're going to be very helpful.

See also http://blogs.technet.com/b/keithcombs/archive/2011/03/28/lenovo-thinkpad-w520-mini-review.aspx which says:
<QUOTE>
[UPDATE for 4/6/2011] A little over a week ago I sent some questions into Lenovo around the drives and storage for the new Sandy Bridge based notebooks. Here are the questions and the answers I received.
1. Are the supported SATA interface speeds on the new ThinkPad's SATA III 6GB? Specifically, is this true for the T420, T420s, X220, X220t, T520, and W520?
[Lenovo] Yes, The new Huron River ThinkPads will support 6Gb/s, but our current drives that have been certified are only 3GB/s drives. The current roadmap is showing Late 3Q or early 4Q is when we'll qualify 6GB/s drives. This is true for the T420, T420s, X220, X220t, T520, and W520.
</QUOTE>

DAQmx support for LabVIEW 2010

FYI to those downloading LabVIEW 2010 from NI web site:
After Installing LabVIEW 2010 (download from web site), I noticed that there is no support for DAQmx (i.e.. VI libraries) in NI_DeviceDrivers-February2010 DVD (my latest copy). Your have to download and install DAQmx 9.2 drivers (the first to include LabVIEW 2010 support).
Additionally, If you were using Traditional NI-DAQ (Legacy) 7.4.4 VIs in a prior version of LabVIEW, you must do one of the following:
      1. Uninstall current Traditional NI-DAQ (Legacy) 7.4.4 installation and re-install after completing LabVIEW 2010 installation.
          Reason: Traditional NI-DAQ (Legacy) installs support only for the latest version of LabVIEW found on the system.
Or
      2. Copy the the "<previous LabVIEW>\vi.lib\Daq" directory and all it contents to a new "<LabVIEW 2010\vi.lib\Daq directory. This way you can use Traditional NI-DAQ in both versions of LabVIEW.

I didn't have DVDs, I had to download.
Yes it was a mess. The device driver download took forever (NI can't help that). The installation took beyond forever (what else can be done?).
I was disappointed that I had to do all of this backing up of legacy folders and restoring them after installing the device drivers. Why does NI always have device drivers and toolkits install to the latest version of Labview only? Why couldn't they leave the legacy stuff alone?? I still use LV2009 and wanted to try LV2010. This involved a whole lot of trouble and time.
NI needs to provide a much easier way to upgrade, while still allowing previous versions to work without modification. Most people who upgrade will not completely abandon the older versions.
- tbob
Inventor of the WORM Global

LabVIEW Support for Innovation Integration X5-210M

Similar Messages

Maybe you are looking for