Large folder never completes sync

Hello All,
I have iFolder running now for a few weeks and i'm trying to understand it's behavior with synchronizing.
I have several iFolders set up and working just fine. Except for 1 iFolder, which is a grand total of 27 GB. When i look at whats happening on my iFolder server (VMware) i see the disk usage going up before it actually starts to sync (see this with all iFolders). However, on the large folder this never gets completed, and the file sync doesn't start. It feels like its stuck in a loop of indexing/initiating and then hitting some timeout and starting all over.
Can someone enlighten me on the inner workings and tell me what is going on and how i can fine tune this?
Kind regards,
Dennis

You could just hit Help-> About to get the actual version, if its not the current ( 3.8.4.1) you may want to upgrade to it.
Could you check the Simias.log from both client and server. This would give you the details of failure.
>>> dennish123<[email protected]> 19-05-2011 04:06 >>>
Thanks for your involvement.
Firstly, not sure which versions i'm exactly running. Think i'm pretty
bleeding edge, but let me know how to verify then i'll post the output.
I managed to figure out that the iFolder in question has id
"68f3d786-08d6-40a7-9d94-2a7686d1665e". Below is some output that is in
the log file. I started syncing from scratch this evening and on LAN in
stead of wireless. I noticed disk usage being high from about
11.33-11.42 and 11.56-0.03. I don;t have the graph data of before those
times, so no data to correlate with older logging. Network activity is
pretty much flat lining during these hard disk peeks, so it looks
something local to the server. I imagine it is looking for changes
server side.
Log: (sudo cat Simias.access.log | grep
68f3d786-08d6-40a7-9d94-2a7686d1665e)
I snatched just over last hour because of max forum mesage, where you
can see it stopped actually syncing data around 11.
18-05-2011 23:04:41 "PutFile" "Success"
"dennish" "Support.txt" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:04:41 "PutMapFile" "Success"
"dennish" "Support.txt" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:04:41 "CloseFile" "Success"
"dennish" "Support.txt" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:04:41 "PutFile" "Success"
"dennish" "cofs.txt" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:04:41 "PutMapFile" "Success"
"dennish" "cofs.txt" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:04:42 "CloseFile" "Success"
"dennish" "cofs.txt" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:04:42 "PutFile" "Success"
"dennish" "colinux-daemon.txt"
"68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:04:42 "PutMapFile" "Success"
"dennish" "colinux-daemon.txt"
"68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:04:42 "CloseFile" "Success"
"dennish" "colinux-daemon.txt"
"68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:04:42 "PutFile" "Success"
"dennish" "debugging.txt" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:04:42 "PutMapFile" "Success"
"dennish" "debugging.txt" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:04:42 "CloseFile" "Success"
"dennish" "debugging.txt" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:12:54 "PutFile" "Success"
"dennish" "rootfs.img" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:12:55 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:12:55 "Start" "Success" "dennish"
"Werk" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "Start" "Success" "dennish"
"Werk" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:32:56 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:41:45 "PutFile" "Success"
"dennish" "rootfs.img" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:56:07 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
18-05-2011 23:56:07 "Start" "Success" "dennish"
"Werk" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
19-05-2011 00:03:09 "PutFile" "Success"
"dennish" "rootfs.img" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
19-05-2011 00:03:09 "PutFile" "Success"
"dennish" "Space.ico" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
19-05-2011 00:03:10 "Stop" "Success" "dennish"
"-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
19-05-2011 00:03:12 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
19-05-2011 00:03:12 "Start" "Success" "dennish"
"Werk" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
19-05-2011 00:11:15 "GetChanges" "Success"
"dennish" "-" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
19-05-2011 00:11:15 "Start" "Success" "dennish"
"Werk" "68f3d786-08d6-40a7-9d94-2a7686d1665e"
hegdegg;2106816 Wrote:
> Which version are you on, earlier version had some issue with syncing
> file greater than 2gb (this file alone would not sync), latest patches
> should not have this issue.
>
> As mentioned below, checking log file helps, go over the logs on both
> server and client.
>
>
> >>> malcolmlewis<[email protected]> 18-05-2011 04:17
> >>>
> On Tue, 17 May 2011 20:36:01 GMT
> dennish123 <[email protected]> wrote:
>
> >
> > Hello All,
> >
> > I have iFolder running now for a few weeks and i'm trying to
> > understand it's behavior with synchronizing.
> > I have several iFolders set up and working just fine. Except for 1
> > iFolder, which is a grand total of 27 GB. When i look at whats
> > happening on my iFolder server (VMware) i see the disk usage going
> up
> > before it actually starts to sync (see this with all iFolders).
> > However, on the large folder this never gets completed, and the file
> > sync doesn't start. It feels like its stuck in a loop of
> > indexing/initiating and then hitting some timeout and starting all
> > over.
> >
> > Can someone enlighten me on the inner workings and tell me what is
> > going on and how i can fine tune this?
> >
> > Kind regards,
> >
> > Dennis
> >
> >
> Hi
> So is the folder it's syncing always getting files added, or you not
> just giving it time to finish syncing and stopping the process?
>
> What do you see in the logs down in /var/simias/data/simias/log
>
> --
> Cheers Malcolm (Linux Counter #276890)
> openSUSE 11.4 (x86_64) Kernel 2.6.37.6-0.5-desktop
> up 1 day 4:35, 4 users, load average: 0.05, 0.09, 0.06
> GPU GeForce 8600 GTS Silent - Driver Version: 270.41.06
dennish123
dennish123's Profile: http://forums.novell.com/member.php?userid=110480
View this thread: http://forums.novell.com/showthread.php?t=438944

Similar Messages

  • Since I updated to latest software on ipad cannot sync. with computer.  Makes it to step 7 however says 'waiting for changes to be applied' and never completes sync.

    Since I updated to latest software on ipad cannot sync. with computer.  Makes it to step 7 however says 'waiting for changes to be applied' and never completes sync.
    thx for the help,
    Tony

    Hello Marcia,
    Sorry you are having trouble syncing content with your iPhone 5. I found an article that might help with this syncing issue:
    iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
    http://support.apple.com/kb/TS3219
    Also, you can delete the songs from the iPhone without syncing by just swiping from left to right over the song to get a delete button. 
    I hope this helps!
    Best,
    Sheila M.

  • IPhone 5 never completes sync

    I just got an iPhone 5, and when I try to sync it up with a backup of my old iPhone 4 from iCloud it gets to the final step of the sync (Step 5 of 5: Waiting for changes to be applied) and just stays in the starting stage of this as if preparing to do the final stage. I've waited for around 20 minutes with no luck, and I have previously tried restoring the iPhone and starting again to no avail. I'm using the latest updates of both iTunes and iOS, can anybody help me out? thanks

    iPhone 4 here, same issue.  I've turned off all my photos to be sent to the unit, but importing photos seems to be a problem.  I'm assuming that means importing from the iPhone.  I might restore from a backup and see if I can shove them back to the phone.
    Have you solved this problem?
    Cheers

  • IPod sync never completes, if I cancel the sync a large portion of my music disappears

    Hi, hopefully someone here can help!
    I have recently had an issue with my iPod touch and iTunes 12.0.1.26. It has been a bit of a pain to sync ever since that update that screwed up other people's iThings but I hadn't had a problem in a few months. Now whenever I try to sync it will take a long time and never complete, always getting hung up on the last step before anything is transferred. If I unplug or cancel I get an error box that says the iPod couldn't be recognised and the sync failed to start even though it would get through to that last bit after backing itself up. After each failed attempt the Other data section becomes bigger until I get another error saying that there is not enough space on my iPod for everything, sometimes it is over capacity by 10GB. Every time this happens I end up with less and less music on my iPod until I get incomplete playlists and entire albums wiped off. After this the only solution seems to be a factory reset and restore from backup, which I have done twice already this week.
    My phone will sync with no issues so I am not sure if it is a software or hardware problem. Its winding me up, anyone have any ideas? I have already removed and reinstalled iTunes and have done a reset on the iPod.

    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reboot the computer
    - Try another USB port
    - Try another cable
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.

  • I inadvertently created a very large file. Not needing it I sent it to the Trash Can. However, the deletion process never completes. Any suggestions as to how to delete it ?

    I inadvertently created a very large file on my hard drive. Not needing it I sent it to the Trash Can. However, the deletion process never completes. Any suggestions as to how to delete it ? I re-installed the OS but the file was still there taking up needed space.

    Command-click all of the files you want to delete and don't actually move them to the Trash until you've gone through the entire folder.
    (63341)

  • XMAM sync never completes

    I have installed xMAM 3.0 (SR4 Patch 0) on a machine and when I click sync 9 out of 10 times sync never completes.
    Our MI server is MI7.0 SP12 patch0.
    Below is the trace file.Can some one point out what may be wrong please? How can I debug this in the middleware?
    Thanks.
    =========================================
    [20080401 15:38:23:382] I [MI/API/Logging           ] ***** LOG / TRACE SWITCHED ON
    [20080401 15:38:23:382] I [MI/API/Logging           ] ***** Mobile Infrastructure version: MI 70 SP 12 Patch 0 Build 200705080758
    [20080401 15:38:23:382] I [MI/API/Logging           ] ***** Current timezone: America/Chicago[20080401 15:38:23:382] I [MI/API/Logging           ] ***** Current Trace Level: 1000
    [20080401 15:38:23:382] I [MI                       ] Trace severity: All (1000)
    [20080401 15:38:23:382] D [MI/PIOS                  ] No implementations found. Error Code:(3)
    [20080401 15:38:23:382] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/trace/trace.jsp'
    [20080401 15:38:29:553] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20080401 15:38:29:553] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20080401 15:38:29:553] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20080401 15:38:29:553] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20080401 15:38:29:569] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20080401 15:38:29:569] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20080401 15:38:29:569] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = 'tracechangeTraceLevel'
    [20080401 15:38:29:569] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/trace/trace.jsp'
    [20080401 15:38:33:366] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20080401 15:38:33:366] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20080401 15:38:33:366] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20080401 15:38:33:366] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20080401 15:38:35:553] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20080401 15:38:35:553] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20080401 15:38:35:553] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20080401 15:38:35:569] P [MI/Sync                  ] Notify R3 called
    [20080401 15:38:35:569] D [MI/Sync                  ] There is already a container for method WAF_REGISTRY and user ELECT16 in the outbound queue
    [20080401 15:38:35:569] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20080401 15:38:35:569] I [MI/Sync                  ] Synchronize with backend called, Thread=Thread-25
    [20080401 15:38:35:569] I [MI/Sync                  ] Thread=Thread-25 took lock for synchronization.
    [20080401 15:38:35:569] P [MI/Sync                  ] Use following gateway for synchronization: http://sppm01.rowancompanies.com:8000
    [20080401 15:38:45:631] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20080401 15:38:45:631] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20080401 15:38:45:631] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20080401 15:38:45:631] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20080401 15:38:55:709] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20080401 15:38:55:709] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20080401 15:38:55:709] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20080401 15:38:55:709] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20080401 15:39:05:788] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20080401 15:39:05:788] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20080401 15:39:05:788] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20080401 15:39:05:788] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20080401 15:39:15:866] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20080401 15:39:15:866] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20080401 15:39:15:866] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20080401 15:39:15:866] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20080401 15:39:25:944] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20080401 15:39:25:944] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20080401 15:39:25:944] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20080401 15:39:25:944] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20080401 15:39:36:037] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20080401 15:39:36:037] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20080401 15:39:36:037] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20080401 15:39:36:037] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20080401 15:39:46:162] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20080401 15:39:46:162] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20080401 15:39:46:162] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20080401 15:39:46:162] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20080401 15:39:56:225] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20080401 15:39:56:225] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20080401 15:39:56:225] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20080401 15:39:56:225] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20080401 15:40:06:303] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20080401 15:40:06:303] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20080401 15:40:06:303] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20080401 15:40:06:303] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20080401 15:40:16:631] P [MI/ComServer             ] Connection to client established
    [20080401 15:40:16:631] D [MI/ComServer             ] Client: received command: shutdownsmooth
    [20080401 15:40:28:209] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20080401 15:40:28:209] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20080401 15:40:28:209] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20080401 15:40:28:209] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'

    Hi,
    you need to find mobileID for your installation and go to monitor - that will give you more details on what is happening with sync process.
    Please refer to this link:
    http://help.sap.com/saphelp_nw70/helpdata/en/43/4411ce2d281bcde10000000a1553f7/frameset.htm
    to get info on monitoring functionlaity of Mobile Infrastructure.
    Regards,
    Larissa Limarova

  • 3g iphone syncs for hours while but never completes

    I have a 3g iphone which indicates it is syncing but never completes. I have worked with the online support as well as my local genius office, with no luck in resolving these issues. I have deleted my bookmarks to see if that would resolve the problem with the syncing only to have the problem occurs while syncing the contacts. I am not getting any error messages.

    If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
    Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.

  • Windows 7 x64 Syncing Never Completes. iTunes Crashes At The End

    I have had my ipod touch 3g for half a year now. First I used to use it on 32bit Windows 7, but recently I upgraded my machine and run 64bit Windows 7. It has been running well for the past few months but all of a sudden I have been getting a lot of error messages as well as iTunes not being able to complete syncing.
    Everything starts normally, but iTunes crashes right near the END, after all the files have been copied. You can almost smell the "Sync complete, ok to disconnect" text. Please check image.
    http://i44.tinypic.com/25jupli.png
    If I let it be, then Windows eventually gives you a iTunes has crashed dialog box.
    I have tried EVERYTHING. Have restored my ipod dozens of times. Have tried 9.1, 9.03 and 9.02 both in 32bit and 64bit variants. Nothing seems to work.
    Funny thing is, if I go back to my old machine with the 32bit Windows 7, the ipod syncs just fine.
    So I am guessings it's either a problem with my machine, or some problem with iTunes and 64bit Windows 7.
    Please help!

    I've had the exact same problem since the last update. It just keeps saying "Sync in Progress" and nothing changes until I stop it. I've tried resetting, reinstalling, etc.
    I have noticed three things:
    It is sync'ing at least partially...
    I unchecked some photo files and it took those photo files off. But now I've added them back and it won't put any photo files onto my iPhone.
    If I check/uncheck iTunes U then hit apply it will actually say "Sync Complete" but it still hasn't put my pictures back on the phone.
    Also...just something that I don't like...apparently the ability to mark a podcast as "played" or "watched" is no longer available as an option at the podcast level and they have to be cleared at the individual episode level...that's totally annoying cause now I have to go through and "mark as played" for each podcast.
    Any ideas?

  • After installing the latest itunes/quicktime update, I can no longer access the itunes store and my iphone does not complete syncing. What can I do to fix this?

    After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this?  I have tried uninstalling and reinstalling itunes.  I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?

    The problem is with version 10.4.1.  I had to reload 10.3 to get it to work.  The recommendation from a previous poster worked for me.  Here was their list of steps:
    Go to Control Panel>Programs>Uninstall
    2.  Uninstall the following Apple programs in the following order:
         a. iTunes
         b. QuickTime
         c. Apple Software Update
         d. Apple Mobile Devices Support
         e. Bonjour
         f.  Apple Appllcation Support
    3.  Reboot PC
    4.  Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
    If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes.  To correct this:
    5.  Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
    6.  Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
    7.  Copy and Paste this file back into the iTunes folder
    8.  Rename this "iTunes Library (date).itl" file by removing the date.  It should say "iTunes Library.itl"
    9.  Reboot PC

  • HT4113 My Ipad has never been synced with a computer or via itunes on a computer only set up by my apple id, when it asked to connect to itunes i turned it off, when turning it on again it asked me for a passcode. I never set up a pascode, now I am locked

    I have just bought a new IPAD. It has never been synced with a computer or via itunes on a computer, I tried to set it up using my APPLE ID and mobile number, it prompted me to connect to ITUNES. Unsure of what to do next, I closed it and took it to work. When I opened it one hour later it prompted me for the passcode. I never set up a passcode. I tried various combinations (my husband iphone, birthdates, kids passcodes etc) to see if somehow it had linked itself to their passcode. I called the shop I bought it from and was advised it would cost me 70 dollars to have it reset. I feel completely devastated that I haven't even been able to use the IPAD and I am already stuck. Can anyone offer some solid advice?

    Place the iPod in recovery mode and then restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • I try to go to certain websites that I've had no problem going to before, and suddenly, it says, "Page cannot complete because the server is loading in such a way that it will never complete." I've tried erasing my cookies, and it still persists. Help!

    I tried going to a site that I've never had problems loading before, and suddenly it says, "Page cannot load because the server is loading in such a way that it will never complete." or something along those lines. I've tried clearing my cookies, but the problem persists. Help!

    If clearing the cookies doesn't help then it is possible that the file <i>cookies.sqlite</i> that stores the cookies is corrupted.
    Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete <b>cookies.sqlite-journal</b> and <b>cookies.txt</b>, if they exist, in the Firefox Profile Folder in case the file cookies.sqlite got corrupted.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder

  • Computer USB port drains battery, won't complete sync'ing.

    Lately I've had a problem where, when I connect the iPhone to the computer to update the podcasts, etc., it drains the battery rather than charge it. In addition, the sync process never completes. Plug the iPhone into a standalone charger and the battery charges OK. I've done a 'restore' twice, but am still having the same problem. The USB port is powered OK since I can connect it to an axillary battery (same cable) and it charges properly. One more note, a few seconds after connecting the iPhone, the little battery icon changes from 'charging' to 'charged'. Any ideas?

    Okay, umm.. Just installed iOS 8.1, when it finished; my computer recognized it. But then it suddenly just started frantically beeping(Windows Connect/Disconnect bleeps). Moved it to a new port, and it no longer detects it. Moved it back to the original port, and will no longer detect it..

  • My windows are never complete after dragging them down from others in full screen...

    When I want to extract a tab from an app in full screen to create a new window, the window that is created is never complete... a bit is always missing at the bottom... Has anyone noticed the same problem?

    I'm having the same problem on a home PC running Windows 7 64-bit SP1 and Office 2010 but I'm not running Norton.  Started with one of dozen or so .PST files I have for various accounts.  The first "...the file so that..." folder has no properties
    and I couldn't delete it.  Subsequent "...the file so that..." (those with .1 and .2, etc) I could delete.  Thought I had the problem solved by simply creating a new .PST file and moving all my mail from the affected. PST file and closing the affected
    one.  That worked for a couple of days but I notice this morning I have the same thing in a completely different .PST file.
    Again, I don't use Norton and have been using the same add-ins for quite some time but this just started in the last couple of weeks.
    DaleM

  • My FCPX boots up and then says restoring windows and stays there and never completely boots.  I've tried everything.  Any thoughts?

    My FCPX boots up and then says restoring windows and stays there and never completely boots.  I've tried everything.  Any thoughts?

    Please state what you have tried - there's no point in people here wasting their valuable (own) time trying to help you, only to find you've already tried what they are suggesting.
    Have you tried trashing your preferences?
    Unexplained faults like this can often be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
    Download Digital Rebellion's Preference Manager (free, simple to use, and perfectly safe, both to download and use).
    With Preference Manager, you can backup the Prefs first, then if trashing makes no difference, you can restore all your settings.
    If you trash them and don't restore them, you will need to manually restore all your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then if they get corrupted you can ditch the bad prefs and restore from your (Digital Rebellion) backup.
    Can't guarantee it, but it's worth a try.
    If that doesn't work, move your projects and events (if you have any) to new folders so that FCP X doesn't find them, then relaunch the application. If it launches OK, there's a very good chance one of your projects or events is corrupt or one of the files in an event is corrupt.
    Quit the app, then move one event or project at a time back to the original folder and launch FCP X agian - keep going until you find the cause.
    Andy

  • Centro Hotsync problem: two Date Books, second never finishes syncing

    I have a Centro. It worked fine syncing for many months using the USB cable. For some reason, now it won't synchronize. All the information in Palm Desktop on my computer disappeared -- I only have my calendar on the phone now. When I try to sync, the HotSync Progress box appears on my computer, and if I show the details, it gives me the following, where there are two Date Books and the second one never completes:
    Package Installer -- done
    Install -- done
    Install Service Templates -- done
    Install To Card -- done
    HotSync Exchange -- done
    Date Book -- done
    Date Book -- synchronizing
    Address Book
    Address Book
    To Do List
    To Do List
    Memo Pad
    Memo Pad
    Addit
    Media
    As you can see, several items from Date Book on are doubled, and the second Date Book gets stuck in perpetual synchronizing.
    I haven't found any answer for this in searching the forums. I tried uninstalling and reinstalling Palm Desktop. I followed advice on Palm's troubleshooting page to rename my username on Palm Desktop and to delete my username from the phone. None of it made any difference. 
    Thanks for your help.
    Post relates to: Centro (AT&T)

    check the hotsync log for the 2nd user (2nd centro that froze).
    try see if you can find any significant error message or codes.
    also try to attempt syncing the 2nd centro and this time change the action of the datebook/calendar to handheld overwrites the desktop.
    that if your desktop is good to be overwritten.
    it is very unusual to behave this way where both of the centros have 2 different user ID's and both are syncing to palm desktop.
    Post relates to: Treo 680 (Unlocked GSM)

Maybe you are looking for

  • Oracle 9iFS performance with WebService

    Hello, We use Oracle 9iFS with Oracle iAS and Oracle Database. We have implemented WebServices that use iFS API to upload/view/modify the documents in iFS. Even for a file that is ~5Mb, the performance is poor. Do we have any Benchmark testing result

  • HT5278 I can not download and install it on my ipad 2. Could you help me?

    Please help me to download and install ios 5.1.1

  • Film and edit in HD but burn a "traditional" DVD in SD?

    Newbie here trying to figure it out. I have an HD project I've burned to disk via DVDSP4. It only runs on a Mac and not on Winderz. Elsewhere I've read you need to down convert HD to SD to make a traditional DVD so Winderz boxes and the TV can read i

  • Keyboard Shortcut for Selecting between volumes?

    How do I select between volumes without having to use the mouse to select the upper left hand section if the finder window? It seems like I can only navigate the folders contained within the drives using the keypad, but not between the drives themsel

  • Cannot undo automatic connection for PPP

    I have 2 types of internet connection set up on my iMac - one for a DSL modem, which I use very infrequently, and another using Airport to connect to a wireless router. When looking at network status it shows both Airport and Speedtouch, and next to