Large number of transport request released from Dev

Hello Gurus,
Our Landscape for Dev consist of three clients. We do development in one client and the testing teams test it in another client. We maintained all these clients in a route which takes around 10 mins to reach after releasing a transport and when testing team fails the test then we correct the error and again create a fresh transport and release it. I understand at some point we are going to reach Maximum number of transports.
Normally, If the tesing team fails the test two times. I create a test role in a testing client and request the user to test it. When everything goes well then I insert it into original role. But all this stuff takes time.
Please advise if there is any other way also to cut this short.
Regards,
MA

Hello,
>
Salman123 wrote:
> I understand at some point we are going to reach Maximum number of transports.
The number range for transports is alphanumeric (over 40 million free numbers are available ). Have a look at sap note [106911|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=10691] for details.
>
Salman123 wrote:
> Please advise if there is any other way also to cut this short
You could copy customizing transport requests via transaction SCC1. But personally I would not recommend this.
Cheers
Joerg

Similar Messages

How to delete the Transport Request release from SE09

Please let me know How can I delete the New Transport release request from SE09 and if I HAVE OBJECTS SUCH AS Process chain and process variant, infopackage in one request. Being A NEW request it has Delevelopment correction ABDK904193 under main request ABDK903667, should I double click on ABDK904193 FIRST AND then go to request editor and change - display and select all request and delete it and save and then delete main request ABDK903667. If I do this will there be any problems on Process chain Objects such as locking or unlocking. let me know if there are any more steps that need to be taken to avoid any trouble.
hope u will help me asap
thanks
hardeep

Hi Hardeep,
Allways delete child node and then parent node.Coz Parent node does not allow you to delete straight away so first delete child node either by double clicking and select all>>delete or individually select each object by placing cursor on it and say Delete by pressing the Delete Icon..it will prompt u message obj is locked press delete that will delete the object, subsequently when all objects are deleted then delete the request also.
when u delete a request all the objects saved or locked onto that request are released or unlocked.
So all the objects that were previously locked or saved onto a req are now ready to save into another req.
Simply say, once the objects are deleted from the req they are independent again with latest changes and readily available to save onto a diff req.
another option is release the req but do not transport it to target system.
Regards
Ellora

How to track Transport request released

hi Experts,
How to track Transport request released from one development system (D01)to another
development (D02).
is there any way we get know .
Amit

Hi,
       From SE09 & SE10 you track the transport requests, and even you can find the transport request details from the following database tables.
E070                             Change & Transport System: Header of Requests/Tasks
E070A                            Change & Transport System: Attributes of a Request
E070CREATE                       Change & Transport System: Creation Date of Request
E070DEP                          Change & Transport System: Dependencies of Requests
E071                             Change & Transport System: Object Entries of Requests/Tasks
E071C                            Change & Transport System: Client-Specific Lock Flag
E071E                            Lang. Transport: Positive List for Generic Object Selection
E071K                            Change & Transport System: Key Entries of Requests/Tasks
E071KC                           Change & Transport System: Key Entries of Requests/Tasks
E071KF                           Change & Transport System: Nametab Info. on (CHAR)Key Fields
E071KFINI                        Change & Transport System: Nametab Info. on (CHAR)Key Fields
E071K_30                         Change & Transport System: Key Entries of Requests/Tasks
E07T                             Change & Transport System: Short Texts for Requests/Tasks

What are the Transport Request Release Functionality ?

Sap Specialist,
                     Kindly tell me, I have following Doubt in <b>Transport Request Release</b> .
                     If we Realease any one Transport Request from SE09 in Developement Server,
                     What are the Functionalities Called ?
                     And How is it Export to Production Server ?

Hi,
kindly go through the following hints.
Transport Request within same Server Different Clients
I have 3 clients under one SID (dev 130,140,150).
And we have more than 400+ transport requests in client 130. How can we transport these requests to other clients of 140 & 150. If I want to use tcode SCC1, that can be done only one tran. request at one time.
Do I need to write a script within unix?
Try STMS.
Click on the "import overview"
Double click on your target system
Click "refresh"
Click on "import all request" or ctrl+F9
Specify the target client
Execute the transport
Done...
Thanks,
Shankar

Transporting a routine from dev to Quality

Hi Frnds,
I have transported a transformation from Dev to Quality. After that i got a requirement, so that i have written routine for a infoobject in Dev. Now i want to transport only that routine to quality.
Here in transport connection i am not able to find out the routine bcoz this transformation having more than 20 routines.Here in transport connection routines are with technical names.
How can I find out my routine technical name?
Or Is there any other way that i can transport this routine only into quality?
Regards,
Sridhar

Hi Sridhar,
Surely you can collect everything and transport it will not impact anything existing. Only if you have made some changes to the transformations in development that are not in quality, will be moved to quality.
Simple way to collect small objects is go to the change mode of the transformation it will ask you for transport request. Give the request number and it is ready for import in quality.
Hope this helps.
Regards,
Viren

RC 8 error while transporting the query from Dev to Qa - Element missing

Hi All,
I have made a multiprovider by copying one existing one.
I have copies one of the Bex queries using RSZC from the source to Target MP.
While transporting the query from Dev to QA i have got the following error. (I have already moved the Multi Prov in a previous TR)
Has anyone seen similar types before. Any inputs will be highly appreciated.
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Error when activating element 4LUSZK561QN74UDBJ7BPU9GFM
Element 4LUSZJXHIS1HM7TVDD9DK7HPU is missing in version M
End of after import methode RS_ELEM_AFTER_IMPORT (Activation Mode) - runtime: 00:00:06
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
End of after import methode RS_ELEM_AFTER_IMPORT (Delete Mode) - runtime: 00:00:14
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20110517070045
Post-import methods of change/transport request BDAK959603 completed
     Start of subsequent processing ... 20110517070025
     End of subsequent processing... 20110517070045
Kind regards,

Hi Jith,
First of all try to consolidate all your objects in a single TR and then move to Q from D.
In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
1. Go to your transport Logs and then to the entries marked as Error.
2. There you will find the Query Element Ids, copy them
3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

How to transport modified query from Dev to QA??

Hi All,
I have made a few changes to a query that has already been transported to QA from Dev. I have removed an Infoobject and introduced a new Infoobject and other such changes.
Now I would like to transport the "new version" of the same query from Dev to QA again so that all the new changes are reflected in QA environment as well.
What steps or procedures do I need to follow for this please?
Thanks for your time,
Regards,
Reddy

Reddy,
BW reporting objects (query / Workbook / WAS tempalte) change transport system is different than other BW development objects (Infoobjects, cubes, transfer/update rules etc..).
Before you start making changes to any Query objects (which are already transported before), first you need to assign the respective Request in the "Transport Connection" tab (click on the BEX with truck symbol icon) and assign your request with the package name.
hope this helps a little..
Good luck
Mavi

Transporting standard table from DEV to PROD

Hi All,
I have updated a table called T166K and T166P for Purchase Order Printouts.
I have entered few values in the above mentioned tables in DEV server.
Now, i would like to move these tables to Production, since i can not create values to these tables in Production server.
How to move tables from DEV till PROD...??
NOTE: While updating these tables, system didnt prompt for saving under Transport Request Numbers in DEV server.
Regards
Pavan

Hi,
You can use scatt tool to upload the data in the developement server. Prepare a file with data. Do it in developement environment only. then in SCATT you have remote logon facility using which you can run the scatt in developement environment and the result will be placed in the production server.
Let me know if you what more information on this.
Pls reward points if helpful
rgds,
Harikrishna

STMS: Add a great number of transport requests to the queue

Hi everybody!
we make a system copy and I have two questions regarding this.
1. After the system has been copied, we have to add a great number of transport requests to the transport queue (transaction STMS). Is there a report to to this?
2. Of course, the transport requests added to the queue have to be imported. Is it possible to mark them all at a time and then start the import? I mean, if one specific object (for instance a reportsource) is part of several transport requests, does the STMS ensure that they are imported in the correct order, so that the following won't happen: a imported object is overwritten by a older version.
Thanks for your help in advance.
Regards
CHRIS

As Sunny said you can do it from OS as there is no SAP program. Create a file with the all transports no. that you want to add to the buffer at the OS level. Here is the script that we use:
for i in `cat file_name`
do
tp addtobuffer $i SID client=xxx pf=TP_DOMAIN_SID.PFL
done
For you second question, the sequence of import into the system will be based on how they are listed in the STMS queue. So first transports goes first then the second, third and so on.
Hope this helps.
Thanks,
Naveed

Error while transporting Data sources from DEV to Qual

System : SCM 5.0 (SP 8), BI 7.0 (SP 12)
1) We are trying to transport Data source objects from Development server to Quality server.
2) Data sources of Type R/3 and Web Service.
3) We are able to transport the objects from Dev.
4) Once we import the objects to Quality server, the objects are becoming into INACTIVE stage.
Please help... Thanx in advance..
Regards
Manoj

HI tanu,
could you let me know how you have solved this issue.
which object not active.
i am having the same issue now.
kris

Error while transporting Dimension Members from Dev to Quality

Hi all,
I am having issue while I am transporting dimension members from dev to QA, The error log is as below; i am not sure what could be wrong;
Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
Member formula expanded for imported master data
Start of data checker messages for Appset XXXX
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Error occurs when checking member formula use on other dimensions
No access to environment 'XXXX'
No access to environment 'XXXX'
BPF: Error reading master data
No access to environment 'XXXX'
Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
UJT_AFTER_IMPORT belongs to package UJT
The errors affect the following components:
EPM-BPC-NW-TRA (Transport)
please advise.
Thanks.
Ambika

hi Raju,
i tried after giving full access but again same error:-
please see the error log below:-
Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
Member formula expanded for imported master data
Start of data checker messages for Appset PETFAS
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Error occurs when checking member formula use on other dimensions
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
InfoObject catalog /CPMB/PETFAS_CHAR is not available in version A
BPF: Error reading master data
No access to environment 'PETFAS'
End of data checker messages for Appset PETFAS
End of after import methode UJT_TLOGO_AFTER_IMPORT (Aktivierungsmodus) - runtime: 00:00:
Starting after import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR in dele
End of after import methode UJT_TLOGO_AFTER_IMPORT (Löschmodus) - runtime: 00:00:00
Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
UJT_AFTER_IMPORT belongs to package UJT
The errors affect the following components:
EPM-BPC-NW-TRA (Transport)
any suggestion..
thanks,
Ambika

Transporting SLD objects from DEV to PROD

Hi,
I need to move My SLD objects from DEV to PROD. There is no QA. Also SLD is not common across DEV and PROD.
Thanks!!
Regards,
Miten.

Hi,
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality using CMS
Regards,
Phani
Reward points if Helpful

Urgent: how to import or transport abap class from dev to q

How to import/transport custom abap class from dev to q.
Any suggestions points will be awarded.
Thanks in advance.
MK

hi M K,
try SE24, your class, and go to menu 'Go to' -> object directory entry,
click pencil icon and give your package name, will raise request.
SE10 to release and STMS from prod to import.
hope this helps.

While transporting Key Figures from Dev to Quality system, error occured.

Hello Experts,
While transporting Key Figures from Development to Quality system, I am getting this error : " /BIC/AZPA1R_CT40-/BIC/ZPA1RBA10 (specify reference table AND reference
field)".
Here, I have changed the data type of the key figure from Number type to Amount type. Then I activated them, captured in request and when transported I got the error saying "/BIC/AZPA1R_CT40-/BIC/ZPA1RBAL9 (specify reference table AND reference field)"
These Key Figures are used in ODS.
Is there I am missing something, please tell how can I make these transports successfull.
Thanks Ishdeep.

While transporting Key Figures from Development to Quality system, I am getting this error : " /BIC/AZPA1R_CT40-/BIC/ZPA1RBA10 (specify reference table AND reference
Yes you missed to transport reference object.
Previously key figure data type is number then you have changed to Amount. While changing data type to amount You should maintain reference char like 0currency, Doc_currency......in the Unit/currency tab. ( If you use fixed unit or currency no need to maintain any reference Object).
During transpotation you need to collect this reference char with main key figure and then transport.
With Regards,
Kishore.

Number range transport request

Hi,
pls tell me are number range intervals not transported using transport request, if yes then how are number ranges appear in prod. server.
thanks
Kavita

Hi All,
thanks for the inputs, but wish to understand the scenario completely I am practicing on IDES and i have been told tht we do not transport number range requests....my question is once we maintain number ranges on dev. server and then carry out customistion i.e. creating OM objetcs like position, job etc......which will be alloted numbers.....now when we move to prd server....then will these objetcs have the same numbers.....or first we maintain number range in prd server then import the customised OM objects
sorry to bother ....but need to understand
thanks Kavita

Large number of transport request released from Dev

Similar Messages

Maybe you are looking for