Laserjet Color MFP M276nw Cannot connect to Web Services, tried every suggestion on forum

I've tried every suggestion possible on the forum. I opened up all ports suggested by HP support on my Belkin wireless N600 router. Changed DMZ to IP address on printer. We even directly wired ethernet to printer, still cannot connect to Web Services. Now I have to wait till April 4 for a engineer to call me back. Everything else is working fine. I can print wirelessly from my laptop & smartphone. Just cannot access Web Services, oh & firmware is up to date on printer & router. We changed DNS settings to 8.8.8.8 & 8.8.4.4.
This question was solved.
View Solution.

It sounds like you have done everything to connect the web services. Web services will not connect if you are on a guest network but if you are connected via ethernet it should be on the right band. What is the printer's IP address? Sometimes it can be too high. Is this for a company that has a proxy on the network? How far away is the printer from the router? Are there any metal shelves, wireless devices or anything else near the printer or between the printer and the router? Check that the router is on Channel 11.
--Printer Does Not Connect To Web Services--
Have you heard back from the engineer? I am anxious to know how it went. I am happy to help if they don't, otherwise keep me posted on what happens. I possibly have one more step for you.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Similar Messages

HP Color Laserjet PRO MFP M177FW Cannot connect to web services

I bought a HP Color Laserjet PRO MFP M177FW today and I set up it. It can print and scan over wireless network. However, It cannot connect to web services correctly. I set the DNS numbers with google DNS addresses. I changed its IP address with manually. The IP address is unique. Normally It doesn't enable/remove webservices. But when I restart it, it can do for few minutes. It can take an e-mail address but It doesn't print any information sheet. When I try to print a sheet It says "Connection Problem" at first few minutes and later it says "Connecting"and it waits, there is no error message. What am I suppossed to do? Please help me.
This question was solved.
View Solution.

Hello rasitbolukcu,
Welcome to the HP Support forums. I understand that you are having difficulties enabling the web services for your Laserjet Pro MFP M177fw printer.
I appreciate all the information you gave me, it makes it much easier to assist you with the troubleshooting. I have included the Getting the Latest Firmware and Product Updates document. It will walk you through ensuring the printer has the latest firmware. Once you have updated the printer, please try to enable the web services again.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP LaserJet 200 color MFP M276nw - cannot connect

Hello,
Installed a HP LaserJet 200 color MFP M276nw on a Windows 7 system with no issues. Then added the "device" / printer on two Windows tablets, with no issues. I was able to print from all three devices. The tablets cannot 'find' the printer.
I then added the printer to another Windows 7 system and now cannot connect from the other systems. I am still able to print from the second Windows 7 system. (I removed the printer from the second Windows 7 system and readded it without issue, and ensured Share the Printer was selected).
Please advise. Should I just return the printer?

Wireless Network Configuration
Status: Connected Wireless: On
Network Name (SSID): xxxxxxxxx
Communication Mode: Infrastructure Authentication
Type: wpa2-psk
Encryption: tkip+aes
Hardware Address: xxxxxx Access Point Hardware Address: xxxxxx
Channel: 6
Signal Strength: Very Good
***Marked out some of the settings***

C310 place to set DNS address(es)? Can print wireless but cannot connect to web services.

Wireless connection setup with no problem for printing (static IPs all around with WEP). Opened port on CA firewall but not on router(?) Can print across wireless network but cannot connect to web services. Thinking that I need to enter DNS(s) but cannot find anywhere to enter them.

Hi,
Open your browser and type in the ip adress of your printer. This will bring you to an internal page of the aio. On the networking tab you shouild be able to set your dns.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

6500A-710n cannot connect to web services

I was on web services and receiving printing apps. Suddenly, my apps stopped printing. I have tried all the other solutions, resetting to default, etc and still cannot connect to web services. It asks for a proxy. I have put the google proxy 8.8.8.8 and 8.8.4.4 but these don't work. What proxy & port can I use?
thanks for your help.
Nancy
This question was solved.
View Solution.

Hi Nancy,
I'm sorry to hear that you are having problems with your print apps not printing as scheduled.
To better assist you, would you please provide some further information:
Has there been any changes to your home network (new internet provider, new router, or new network password)?
Are you able to send to print jobs to the printer's ePrint email address?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP Laserjet Pro 200 color MFP M276nw, cannot air print

Madam/Sir,
How do I install air print on my HP Laserjet Pro 200 color MFP M276nw so that I may print using my apple devices (ipad, iphone). Currently I can only print through wireless connection which is 'moody' - doesn't print at times.
Regards
Rahul

Hi,
It supports AirPrint as shown:
http://support.apple.com/kb/ht4356
Please read on the first page of the above link:
How to print in iOS
You can print from Apple apps like Mail, Safari, Photos, Camera, Maps, Pages, Numbers, Keynote, and more. Many apps available from the App Store also offer this feature.
To print, follow these steps:
Tap or at the bottom of your screen.
Tap .
Choose your printer, the number of copies you want, and then tap Print.
Make sure that you are on the same network as the AirPrint printer that you want to use. All AirPrint-enabled printers on the same network should be displayed, including those that are properly configured for a Wide Area Network (WAN).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP LaserJet Pro 200 Color MFP M276nw: cannot install on Windows XP Professional 64-bit

Hi all,
I am trying to install (via USB) the printing driver for my HP LaserJet Pro 200 Color MFP M276nw printer, but my operating system is Windows XP Professional 64-bit, Service Pack 2. The installer stops with an error saying that the system is not supported. Are there any basic drivers available to fix this problem, or do I necessarily need to upgrade my OS?
Thank you,
Alessio

XP 64-bit is not supported. (see system requirements)
Now is a good time to consider a O/S upgrade because of the end of life come April/2014 for Windows XP.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

HP 7510 says it cannot connect to web services.

My HP7510, having been able to cannoect to Web Services now says that it cannot, so it cannot update (I don't know if it needs to) and asks me to check that it is connected to the the network and the Internet. It is. I have resorted to a fixed IP address because a automatic one caused problems with different computers. There are other people with this problem in the HP community but the answers they have found do not work in this case and seem barmily random. What is the cause of this problem? How can a machine on a wioreless network on which every other device connect to the Internet have difficulty connecting to the Internet unelss it is broken?

The steps below typically resolve the issue you’re experiencing:
1. Unplug the power cord from the back of the printer.
2. Unplug the power cord from the back of your router (and modem, if separate from the router).
3. Wait 20 seconds, then plug the router (and modem, if applicable) back in.
4. Wait 30 seconds, then plug the printer back in and power it on.
5. Press the ePrint button on the printer's front panel, and it should try to connect to Web Services again.
Those steps usually resolve the issue, but if it still occurs you can try setting static network info for the printer (which sometimes helps to stabilize the printer's ability to get outside of your network, to the internet):
1. Press the wireless icon at the top of the printer's screen and note the IP address.
2. Enter the IP address into the address bar of a web browser on a computer and press enter or click the browser's go button.
3. The printer status page should be opened. Click on Network at the top.
4. Click on Networking on the left.
5. Select Proxy Settings.
Note: If you are prompted for a redirect, select OK. If you receive a certificate warning, select the option that lets you continue anyway.
If you receive a Internal System Error, refresh the page until it loads the proxy settings.
6. Verify that all fields are blank. If they are not, clear them and make sure the Proxy Server requires authentication is unchecked and click apply. You should get a success message.
7. Click on Network Address (IP) on the left.
Note: If you only see IP Address Configuration and DNS Address Configuration with a yellow note, refresh the page until it loads completely.
8. Leave the IP Address Configuration as Automatic IP.
9. Change DNS Address Configuration to Manual DNS server.
10. Enter 8.8.8.8 for the Manual Preferred DNS Server and 8.8.4.4 for the Manual Alternate DNS Server.
11. Click Apply and you should get a success message.
12. Power off the printer for 30 seconds and then turn it back on to force the new settings to take effect.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Setting up eprint - cannot connect to Web Services

HP 7510 - new install - eprint cannot connect to Web Services

Hi,
You may have to wait and retry. The site may go down for maintenance. OR you may wat to try this:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Envy-110-Printer-Cannot-Enable-Web-Services/td...
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Envy 7645 Cannot connect to web services

I have a new Envy 7645 that cannot connect to the web services.
Things I have tried:
Verified Internet access. The printers "Web Access Test Results" report shows "No problems found"
Verified wireless connectivity by connecting to the printers Embeded Web Server
I statically set the DNS to 8.8.8.8 (primary) and 8.8.4.4 (secondary)
The IPv4 address was assigned via DHCP so I changed it to static (manually) assigned
Re-verified wireless connectivity by connecting to the printers Embeded Web Server with the static IP
Lots of printer reboots to make sure the changes took effect. (Have you tried turning it off and on again? Ha!)
Logged into the https://www.hpconnected.com website
The printer is registered under my devices tab
The printer status is "offline" (I assume this would change if the web services were working)
Any help would be appreciated.
This question was solved.
View Solution.

Hello treadwayl,
Welcome to the HP Support Forums!
Thanks for putting the time in to a very informative post about the ENVY 7645 not being able to connect to Web Services. When you attempt, what is the exact error or message?
I would like to you try the DNS of: Primary DNS Server = 209.244.0.3 & Secondary DNS Server = 209.244.0.4
Re-boot printer and router, then try again to connect.
Let me know the out come, cheers.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Cannot connect to web services HP 7525 printer

It used to work fine. Now I jsut get the message "unable to connect to web services......" I've chcked and the printer is connected to wifi. I tried the solution posted " put IP address in a browser etc...... but when I do that in Exploer all I get is jiberish, no web page with the network buttons.

Hello @JACKUSHNER,
Welcome to the HP Forums!
I understand you're receiving a message stating "unable to connect to web services" using the Photosmart 7520. I will do my best to assist you! I would start off by following this entire HP document on A Network Connected Printer Cannot Access Print Apps, Web Services, or ePrint.
Please post your results, as I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

I'm connected to the internet but I keep getting the message cannot connect to web services

When I Scan to Email in my Photosmart 7520 all-in-one printer, I get the message, "Unable to connect to web services. Confirm internet access and try again."

Hello @Skrafty,
Welcome to the HP forums.
I understand that you are having a problem with the scan to email feature on your Photosmart 7520.
I would like to help.
Touch the ePrint icon on your printers display.
If you get the same server connection error, Try setting a manual DNS.
The following link is to a post by happytohelp01.
It contains instructions for setting a manual DNS.
Efax 7510 still won't work after turning off/on ePrint several times
If you do not get a server connection, then I would remove Web Services and enable again.
Warning: If you remove web services the printer will lose its custom ePrint address.
This address will be lost forever. It will also wipe out any scan to email settings.
To remove Web Services, touch the ePrint icon.
Go into settings and select Remove Web Services.
You will be brought back to the printers main menu.
Touch the ePrint icon again and enable the feature.
Once you get the printers claim code (used to customise the ePrint address) you can setup scan to email again.
If you encounter any issues or have additional questions please let me know.
Also you can call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Hours:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

7520 Server connection error. Cannot connect to Web Services.

I have been using scan to email with no problems on my HP 7520 since I purchased it a couple of months ago. Suddenly it no longer works. I get the message that the app is unable to connect to web services. I've tried other apps and they work. eprint works. Tried turning off router and printer - same result. Tried the change to manual DNS server. Still unable to connect. Please help resolve this problem. Thx.

Hi there, contact Cloud Service support on 855-785-2777 (US) for assistance. Hope the problem gets resolved to your satisfaction.
Best
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

My printer cannot connect to Web services

Hi,
When I tried to set up the Web Services, I got an error.
The error is "Server problem. The printer could not connect to Web Services. The server might be busy or temporary unavilable. Try it again later."
I am connected to the internet (WiFi) and the Internet connection is no problem. I have had this problem for 2days. I would appreciate any your advice.
Thank you.
This question was solved.
View Solution.

I did your instruction, but i still had the same problem. However, after i printed web access test report, changed the date on my printer, and auto-off is on, my printer was somehow able to connected the web services! Thank you very much for all your advices!

Cannot connect to Web Service to change IP address

Already said, I have a LaserJet Professional P1606dn printer, had it for a while now. Someone sent a print job to it, nothing out of the ordinary, and all of a sudden, it printed that print job over and over. I checked in the print queue, nothing was there (not even on the server where the printer is stored). We save the printer settings and the driver on the print server and install it on machines through the server. We turned it off and waited a few minutes, then plugged it back in. It was okay until someone else sent a different print job. Started spitting out the print job from before (then one printing over and over). I did a factory reset on the printer. Needless to say, it changed the IP address (but did not change it to 192.168.x.x). It kept our domain's IP but the last number in the IP address changed. I figured the IP address would change and I was okay with that. Here's the problem: I printed a Configuration page with no issue and it gave me the IP address. However, when I try to log on to the printer via the Web Service (putting the IP address in a web browser), the page times out and says it can't be displayed. All I need to do is go in and change the IP address to a static IP address (back to the original IP address). Under "Network Information," the status says "An unknown error has occurr" but the rest of the sentence/error is cut off. I'm not sure if it gives an error code or just stops with "occurred" or what. And unfortunately, the printer does not have a display screen so the only way I can change it is through the Web Services via a web browser. I've tried Google Chrome (my default browser) and Internet Explorer. Both browsers timed out and said that the page couldn't be displayed.

Could be your network. What I would do is connect the printer directly to a computer using a crossover cable. I would recheck the ip address on the printer and make sure the computer has an address with the first 3 sets of number the same and the last digit on the computer 1 off from the one on the printer. Then use the web browser on the computer to see if you can attach to the printer. If you can you can then change the ip address to what you want. Keep in mind most times when you have the issue you are having the issue is the driver and the computer sending the print job. In other words the q may be empty but the printjob file in the windows subdirectory has not cleared. Sometimes you have to go in and physically delete the printer. It could be on the server, but sometimes it is on the local machine.

Laserjet Color MFP M276nw Cannot connect to Web Services, tried every suggestion on forum

Similar Messages

Maybe you are looking for