Layout of a transaction

How can I modify the layout of the main screen of transaction F-05?
I need the field for CME to be shown, otherwise, I can't introduce the line item 09A. And at this moment, to indicate the first line item position, at the bottom of the screen I have only :
- PstKy
- Account
- Trans. type
Thanks to all,

You need to assign to the Planning Area in the Planning Profile under SPRO-Controllig-Cost center Accounting-Planning-Manual Planning
Once you assign it, it would appear as one of the layouts in KP26

Similar Messages

  • How to give link between 2 customized layout in f110 transactions.

    Hello Abapers,
    I am developing customized layout for f110 transaction.I have developed layour for cheques as zcheques and for payment advice,i have developed layout as zpayadvice.When i am running f110 transaction..it is giving output of cheques only,it is not giving payment advice report.when I am using standard prenumbered cheques form and it is diplaying my customized layout of payment advice(zpayadvice)..this is my porblem..Is there any interlink between customized layouts in f110 transaction.how can i solve this problem.
    This is very urgent for me.
    waiting for ur favourable replies.
    Regards
    Maruthi.

    The SelectOneChoice section is:
    <af:selectOneChoice value="#{bindings.ProcessId1.inputValue}"
    label="#{bindings.ProcessId1.label}"
    autoSubmit="true" id="ProcList"
    showRequired="true">
    <f:selectItems value="#{bindings.ProcessId1.items}"/>
    </af:selectOneChoice>
    and the binding list:
    <list StaticList="false" ListOperMode="0" IterBinding="NameViewIterator"
    ListIter="ProcessListIterator" id="ProcessId1" NullValueFlag="1"
    NullValueId="ProcessId1_null">
    <AttrNames>
    <Item Value="ProcessId"/>
    </AttrNames>
    <ListAttrNames>
    <Item Value="ProcessId"/>
    </ListAttrNames>
    <ListDisplayAttrNames>
    <Item Value="ProcessName"/>
    </ListDisplayAttrNames>
    </list>
    Do I need to change the format of SelectOneChoice to add "for each"?
    Message was edited by:
    [email protected]

  • Changing the output layout of standard transaction FPWLM

    Hi All,
    We have a requirement where we need to change the output layout of the standard transaction FPWLM which is used fo the management of worklist for collecion management.
    In this transaction under the current worklist if we select the worklist ID and display it , work items are displayed in the Grid display. We want to add certain fields here in the output layout of this transaction. We tried adding the fields by selecting the change layout option which displays the list of hidden fields which can be added . But the problem is the field which we want to add is not present in this list.
    Is there any other way to add the fields to the output layout of standard transaction.
    thanks
    regards
    manipal

    Hi Manipal,
    Maybe check IMG under Basic Settings for Collections Management.
    This node contains the sub-node Worklist.
    Two enhancements are availaable here:
    BAdI: Enhancement of Worklist Items on Creation
    BAdI: Enhancement of Worklist Items on Display
    Maybe read the documentation for the nodes to determine if the enhancements will accomplish what you are looking for!?
    Since this component is not active in our installation, I have no experience with this functionality.
    Kind regards,
    Robert

  • Layout in CIC0 transaction

    Hi experts,
    I'm new to CRM 4 and I'm working on Support to users. New user accouants were created but the layout of CIC0 is different for them. Old users have a layout more user friendly and contains more functionalities.
    Anyone konws how to set the layout of this transaction to new users?
    Thanks in advance

    HI,
    Start transaction ppoma_crm, select org. unit (for users who have different profile).
    Go to extended settings via SAP menu and you can see assigned WinClient profile.
    Denis.

  • Config line item layouts for Clear transaction

    hi all,
    can anyone tell me how I can config these codes
    Current line item layouts for Clear transaction F-32, menu Settings/ line layout:
    A1     Allocation / document number
    K1     Document number
    K2     Reference no.
    K3     Account number
    K4     Account number / company code
    K5     Company code
    K6     Payment order
    K7     Bill of exchange payment request
    SA     Order
    SB     Purchasing document
    SP     Project
    T1     Original document number
    Z01     Account / Allocation
    Z02     A/P - Open invoices
    Z03     WBS Element
    Z04     Network
    ZK2     Ref. / Alloc. / Document / Reason C
    thanks alot!
    Tram Nguyen

    Hi,
    In IMG (transaction SPRO) under
    Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Incoming Payments -> Manual Incoming Payments -> Make Settings for Processing Open Items -> Define Line Layout
    Here you determine which information is to be made available on the screen when processing line items (for example, document type, document number, account number, company code).
    Regards,
    Srilatha.

  • How to block amount field and layout field  in transaction MIR7

    Hi Expert,
    Please tell me how to block amount field and layout field  in transaction MIR7 for a particular user .
    i am trying to block through SHD0 tcode but it is not blocked.please give me the right ans
    Thanks In Advance

    Hi Rajuka,
    I wasn't refering to SHD0 transaction variants. User exists and Customer exists are a very interesting enhancements in ABAP which helps to add custom logic to SAP delievered programs/function modules without actually modifying the original program.
    Just to add a little more details to the concept of Custom Exits (Customized user exits), please refer the links below:
    [http://wiki.sdn.sap.com/wiki/display/ABAP/CustomerExits(CMOD)]
    [http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=189893877]
    [http://wiki.sdn.sap.com/wiki/display/ERPFI/Creatinguserexitsforsubstitutions]
    You will find a lot of information about custom exists and its types over the web. Also, your developer might provide you a better insight into this concept and its relevancy to your requirement.
    Cheers!
    Sandipan
    Edited by: Sandipan Choudhury on Dec 10, 2010 8:02 AM

  • Problem to set the custom layout as the default layout in std. transaction

    Hi all,
    I want to change the standard layout that is displayed in a standard transaction (EL31) as default. I want few more fields of the structure also to be displayed in the default layout of the standard transaction. I have made a custom layout that i want to be displayed but cant make that layout as the default layout for all users. Please suggest me some way to make the custom layout as the default layout for a standard transaction.

  • Make a custom layout in IH01 transaction for all users profile..

    hi guys,
    i have a problem..
    today my co-worked asked me to find a way to make a layout in T IH01 which is the same for all the users who log in the system..
    i explain:
    i choose functional location
    press F8 and see my functional location selected..
    now  i want to see other fields going to settings --> field selection.. and choose all the field i want..
    now i have my custom layout for this standard transaction..
    but i want to keep in that way also for the other profiles.. ( ex: i use prophile DEVELOP, i want to make the same for DEVELOP1, DEVELOP2 and so on...)
    could you help?
    thanks all.
    Maurizio

    Hi
    Select the fields and Create /DEVELOP layout.
    Save it by giving Standard namespace /DEVELOP.
    Next save layout with  /DEVELOP1,  /DEVELOP2....
    Repeat the above steps for the required times.
    To Save the layout
    Settings -> Layout -> Save As Variant.
    Shiva

  • Report Layout for AR Transaction Register - ARRXINVR

    Hello,
    Our user wants to take some columns from the Transaction Register report in AR. This is a Spawned program and it's executable is ARRX_C_TRX.TRANSACTION_REGISER. I have looked through this procedure and the other ones that called and not able to find the code to format the layout. Do anyone know which procedure should I look into? Thanks a lot.

    Hi,
    Have a look at this thread.
    To View Spawned Concurrent Program Source Code
    To View Spawned Concurrent Program Source Code
    Please be aware that customizing seeded Oracle forms/reports is not supported (you may also lose the changes when you patch those files).
    Thanks,
    Hussein

  • Screen Layout According to Transaction Code

    Hi,
    Can we change the SAP screen layout settings according to the transaction codes? I mean to say if we run STMS we get different colors and if we run se38 than we get different colors. So is there any setting to do the same.
    Thanks,
    Bhanu

    yes, of course, it is possible. You have to give your coding into the PBO (if it is a report program, than the coding comes into AT SELECTION-SCREEN OUTPUT event). Just check the value of the tcode and code accordingly...
    IF sy-tcode EQ '...'

  • Assign a New Report Painter Layout to a Transactions

    Dear all.
        I have created a New Layout ZPT-ACTIV-01 by copy the Layout 0PT-ACTIV-01.
        I need to created a new transaction. I Copy the transaction S_ALR_87012258 to ZS_ALR_87012258. Because a create a new Layout ZPT-ACTIV-01 e need to change the Default Value
    D_SREPOVARI-EXTDREPORT = FBR 01RFRRS02 ZPT-ACTIV-01                .
    But When i'm saving the transaction the following erro message appears "Do not use blank characters"
    Best Regards
    Thanks In Advanced
    Pedro Miguel Rodrigues

    No, i don't have any aditional Space.
    But, i think that this problem is only occurs in my SAP Version ECC 5.0.
    Best Regards
    Thanks in advanced
    Pedro Miguel Rodrigues
    This problem was solved by implementing the OSS Note 871039
    Message was edited by: Pedro Rodrigues

  • Layout - Batch Number Transactions Report

    Hi all,
    Our customer has made a layout (IBT3, In Document Tree) in the report 'Batch Number Transactions' via "Inventory -> Inventory Reports -> Batch Number Transactions Report"
    When you have filled the selection criteria in Batch Number Transactions Report and when you click on 'Print Layout Designer'-button you can choose 3 layouts that are:
    - Without Transactions
    - Specified (Including Transactions)
    - In Document Tree
    When you click on the 'Print Preview'-button the following layouts are available:
    - Without Transactions
    - Specified (Including Transactions)
    And the layout "In Document Tree" is not available and why?
    Thanks in advance,
    Chief

    Chief,
    The 'In Document Tree' option is the layout which is used when there are batches for a transaction and the batch report is printed along the original document - you can't print it from the Batch Numbers Transaction Report.
    For example you create a GRPO with a batch managed item and when you print the GRPO there will be 2 documents printed: one for the GRPO itself and one for the batch numbers - this is the layout you set as default for the 'IBT3 - In Document Tree' option.
    Hope it helps.
    Regards,
    Nat

  • BPS Layout - Combinations on transaction data issue

    <p>
    I've got a planning level with some characteristics (10) and one key figure (0QUANTITY). All the characteristics are restricted for one value in the level, except one, which is restricted by an exit variable for one or more values (depending from other parameters). Letu2019s call this characteristic 0MATERIAL.
    On this level Iu2019ve got two planning layouts: both have Material on the lead column and quantity on the data column (with all the other chars in the header): layout 1 displays all the possible combinations, while layout 2 displays only combinations from transaction data.
    This way I let the user select the material with layout 1 (writing on the quantity column), and with layout 2 I show him his selection (only the materials with quantity other than 0).
    </p>
    <p>
    Everything is working fine when Material is restricted for more than 1 value:  I can see the material number on layout 2 only if I set a quantity on layout 1.</p>
    <p>When material is restricted for only one value in my level (with my exit variable), both layout 1 & 2 show one record (with the material number and a u20180u2019 quantity); in deed Iu2019m expecting layout 2 (which shows only combinations from transaction data) to be empty.</p>
    <p>
    It seems like the system is adding a dummy record in my layout: it happens even if I delete all the data in my infocube.
    Does anyone know how to fix this and display layout 2 with no records?</p>
    Edited by: federico blarasin on Aug 10, 2010 5:06 PM

    Hello Marc,
    I'm sorry but it's not that easy
    There's no data in my cube (I deleted all the data requests in RSA1), there's no data in my planning buffer.
    If I change the selection in my level, adding another material (with the characteristic restricted for two values), everything works fine:
    -layout 1 shows 2 rows (with quantity = 0);
    -layout 2 shows 0 row (there's no data, layout is blank).
    If in my level I restrict the material for only 1 value, it will result in both layouts showing 1 row, with 0 quantity.
    I tried to reproduce the issue, building a dummy level with some chars and a key figure. Every char is restricted for only one value, except one char (on the lead column in the layout) which is restricted for two or more values: everything works fine.
    But if I restrict the lead char for 1 only value, the layout supposed to show the transactional data shows me a dummy record (it's not blank).
    Edited by: federico blarasin on Aug 12, 2010 3:27 PM

  • Adding an field in the Layout Selection for Transaction FS10n

    Dear Experts,
    I am facing a problem and expect your help on this..
    <u><b>SCENARIO:</b></u>  After putting in the required values in the fields like the G/L Account, the fiscal year, company code, etc the transcation prompts you with an grid containing the debit, credit, balance..
    Once you click on any of the balances you will see an ALV grid which can be customized according to your requirement.
    <u><b>ISSUE:</b></u>  I want a particular field called the offset account in the layout but it doesnt appear in the hidden fields list. Although i can see the same field in another server located in Delhi. I dont know whats the issue here but im not able to see it at all and dont know from where do i get it. The offset account is the field GKONT in the table ANLE..
    I want to get the offset account into the hidden fields.. Please help me out guys..
    Useful answers will be rewarded

    Hi,
    the field is named "Offsetting acct no." (GKONT) in tcode FBL3N ( FS10N - F2)
    but it's not filled.
    -> use database SDF - structure GSEG
    or fm GET_GKONT
    A.

  • Error when i click on layout tab in transaction SFP

    Hi Experts,
    I am using SAP GUI 7.1 and Adobe reader 8.0.1. but getting follwing error.
    Could not start Layout Designer (see long text)
    This is the long text.
    Diagnosis
    The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation.
    Procedure
    Make sure that you have the forms design tool installed on your desktop (the tool is part of the SAPGUI installation).
    could anyone help me where i have to check Layout Designer is installed or not , which patch i have to install?
    Thanks in advance,
    Dhananjay

    Hi . Read this PDF Forms - Could not start Layout Designer
    Regards.

Maybe you are looking for