LCD 100 PRO 40N error "Check Cooling System"

At our school, we have a Cisco LCD 100 PRO 40N that now shows a message on the screen that states "Check Cooling System". I have not been able to find any information or documentation on how to do this or how to clear the message. This message is coming for the LCD, not from the DMP it is connected to. Does anyone have any information that might help?

Hello James,
"Check Cooling System" message is displayed on the screen when there is an issue with the cooling fan. Couple of things you can do proactively are check for ventilation issues on the back of the LCD screen. Switch it off for around 5-10 minutes and turn it back on. If the issue persists, open a Cisco TAC case to get an RMA.
Thanks,
Sagar Dhanrale

Similar Messages

DMP 4400G RS 232 connection with Cisco LCD 100 PRO 40N

Hi everyone,
I know that this question was kinda asked before, but I still have trouble setting the DMM to control the Cisco LCD 100 PRO 40N (Samsung) through the DMP RS 232 connection!
I have searched and read every post on this forum, tried everything ("Samsung_MDC_RS232_Protocol_Ver-21.pdf" & rs232.tx_hex= ) but with no avail.
We have DMS VmWare Demo (Signs&Cast 5.2, Show and Share 5.2) and 4400G with 5.2 firmware.
Also, I've connected the Serial RS232 9-Pin Female to Female that came with the TV onto the DMP 4400G and into the TV RS232 IN port, configured the DMP Display Control in the Advance Task tab as you can see from the attach picture, and set the TV type to Cisco 40N and Power ON and another task for Display OFF. What am I doing wrong here!?
Any input will be greatly appriciated!

With DMS 5.2, this pretty straight forward as your JPEG attachment shows.
Take a look at the documentation...
There may have been some steps you missed...
For 5.1 & 5.2....
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_1/dmm/user/guide/dsm+etv.html#wp1718477
* Connect RS-232 cable to the DMP and the LCD.
I believe either RS-232 port should work for the LCD. I thought the FRONT port (closet to front of TV)
was an IN\OUT port. And the BACK port was just an IN port. I used the BACK port for my testing.
* next, you NEED to ENABLE ON RS-232 controls on the DMP first. From the DMM, issue the
"Advanced Task--> System Task --> RS-232: Control Supported, non-DMTech displays" for the DMP(s)
in question. By default, RS-232 controls are disabled.
* Create 2 new System Tasks in the Advanced Tasks Tab.
Turn ON - Cisco LCD = rs232.tx_hex=aa11fe010111
Turn OFF - Cisco LCD = rs232.tx_hex=aa11fe010010
* Once RS-232 Control is Enabled & the New System Tasks are created, You can now issue the LCD Turn On & Off
tasks from the DMM-DSM DMP Manager.
Note: You can combine RS-232 commands using the "Control TV" tool on the DMP Manager List Zone. The "Control TV"
is designated by the TV with Antenna Icons in the DMP List Tool bar.
If this answers your question, Please take time to mark thisdiscussion answered & rate the response.
Thank You!
T.

Cisco LCD 100 PRO 40N

HI,
Could anyone please help me out to solve the isssue with Cisco 40" LCD display[100 PRO 40N].
RS 232 Control details, so far I got from some sources are as Baud Rate -9600
                                                                                           Data Bit     -8
                                                                                           Parity        -None
                                                                                           Stop Bit     -1
RS 232 pin configuration          2.[Rx]               2.[Tx]
                                             3.[Tx]               3.[Rx]
                                             5.[GND]           5.[GND]
Please tell me if its the correct details which I got.

With DMS 5.2, this pretty straight forward as your JPEG attachment shows.
Take a look at the documentation...
There may have been some steps you missed...
For 5.1 & 5.2....
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_1/dmm/user/guide/dsm+etv.html#wp1718477
* Connect RS-232 cable to the DMP and the LCD.
I believe either RS-232 port should work for the LCD. I thought the FRONT port (closet to front of TV)
was an IN\OUT port. And the BACK port was just an IN port. I used the BACK port for my testing.
* next, you NEED to ENABLE ON RS-232 controls on the DMP first. From the DMM, issue the
"Advanced Task--> System Task --> RS-232: Control Supported, non-DMTech displays" for the DMP(s)
in question.   By default, RS-232 controls are disabled.
* Create 2 new System Tasks in the Advanced Tasks Tab.
Turn ON - Cisco LCD = rs232.tx_hex=aa11fe010111
Turn OFF - Cisco LCD = rs232.tx_hex=aa11fe010010
* Once RS-232 Control is Enabled & the New System Tasks are created, You can now issue the LCD Turn On & Off
   tasks from the DMM-DSM DMP Manager.
Note: You can combine RS-232 commands using the "Control TV" tool on the DMP Manager List Zone. The "Control TV"
is designated by the TV with Antenna Icons in the DMP List Tool bar.
If this answers your question, Please take time to mark thisdiscussion answered & rate the response.
Thank You!
T.

IX4-300d I/O error, check file system, now stuck at software restart

Good morning!
I have a brand new IX4-300d. Was uploading files with sftp yesterday, which kept giving me errors, so I enable support access and checked the logs while uploading. Got a lot of:
end_request: I/O error, dev sde, sector 16384
sd 16:0:0:0: [sde] Unhandled error code
sd 16:0:0:0: [sde] Result: hostbyte=0x07 driverbyte=0x00
sd 16:0:0:0: [sde] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sde, sector 0
sd 16:0:0:0: [sde] Unhandled error code
sd 16:0:0:0: [sde] Result: hostbyte=0x07 driverbyte=0x00
sd 16:0:0:0: [sde] CDB: cdb[0]=0x28: 28 00 3a 38 17 c0 00 00 01 00
end_request: I/O error, dev sde, sector 7814036992
sd 16:0:0:0: [sde] Unhandled error code
sd 16:0:0:0: [sde] Result: hostbyte=0x07 driverbyte=0x00
sd 16:0:0:0: [sde] CDB: cdb[0]=0x28: 28 00 3a 38 17 d3 00 00 01 00
end_request: I/O error, dev sde, sector 7814037144
sd 16:0:0:0: [sde] Unhandled error code
sd 16:0:0:0: [sde] Result: hostbyte=0x07 driverbyte=0x00
sd 16:0:0:0: [sde] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sde, sector 0
sd 16:0:0:0: [sde] Unhandled error code
sd 16:0:0:0: [sde] Result: hostbyte=0x07 driverbyte=0x00
sd 16:0:0:0: [sde] CDB: cdb[0]=0x28: 28 00 00 00 00 01 00 00 01 00
end_request: I/O error, dev sde, sector 8
sd 16:0:0:0: [sde] Unhandled error code
sd 16:0:0:0: [sde] Result: hostbyte=0x07 driverbyte=0x00
sd 16:0:0:0: [sde] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sde, sector 0
sd 16:0:0:0: [sde] Unhandled error code
sd 16:0:0:0: [sde] Result: hostbyte=0x07 driverbyte=0x00
sd 16:0:0:0: [sde] CDB: cdb[0]=0x28: 28 00 3a 38 17 c0 00 00 01 00
end_request: I/O error, dev sde, sector 7814036992
sd 16:0:0:0: [sde] Unhandled error code
sd 16:0:0:0: [sde] Result: hostbyte=0x07 driverbyte=0x00
sd 16:0:0:0: [sde] CDB: cdb[0]=0x28: 28 00 3a 38 17 d3 00 00 01 00
end_request: I/O error, dev sde, sector 7814037144
So I requested a offline file system check from diagnose page. That was as off now 23 hours ago, from what I can see, the fs check did not take long, but has been stuck at DEvice software restarting for at least 22 hourse. I use less then 200Gig on it, setup as raid 10.
This device is not 1 month old. I had it freeze on my once already, not while restarting, just froze up. So that is the second time.
Status in the web console said all is fine, I had to go in through ssh and look at the os logs to find out what is happening.
What should I do?
Solved!
Go to Solution.

Hello CollegeMathieu
Please contact support using the below support links so we can have the issue properly diagnosed. There is a good chance that the unit may have shipped with a defective drive (if it is a diskless model one of your hard disks may be defective). This could be causing the strange firmware behavior.
A couple of things to try :
-power down the unit and re-seat all disks then try booting again to see if there is any change.
-If the above does not work, try swapping disk 1 with any of the other hard disks while powered off and then try booting again.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Error Checking File System that doesn't exist anymore [Solved]

I had been dual booting Arch and Ubuntu on my desktop and recently decided to ditch ubuntu and experiment with slackware. I also decided to take advantage of the reinstall to clean up my partition scheme.
The old:
sda1 ntfs windows
sda2 fat32 shared data
sdba5 swap
sdb1 ext3 Arch's root
sdb2 ext3 Arch's home
sdb3 reiser Ubuntu home
sdb4 logical partition
sdb5 reiser Ubuntu's home
sdb6 ext3 used to be shared /boot, but only Ubuntu had been using it since last Arch reinstall
The new
no changes to sda or Arch's partions
sdb3 ext3 Slackware root
sd4 ext3 Slackware home
Slackware is working fine, but when I try to boot up Arch I can only get to where it checks the filesystem, sdb1 and sdb2 check clean, then it tries to check sdb5 and obviously isn't finding this to be clean. When it drops me to the terminal I my old partitions and sdb4 are clean. sdb3 gives me an error saying it can find the reiser journal (don't have the exact wording but it obviously thought this should be a reiserFS not ext3) but if I do fsck.ext3 instead of just fsck it says it's clean.
It's probably relevant that my last few boots before the slackware install were complaing that my ubuntu partitions weren't clean, which kind of confused me since I didn't even mount those in Arch but I didn't bother fixing it since I was planning on reformatting them when I installed slackware and I could still boot into Arch unlike now. I'm wondering if Arch is still complaining about them not being clean from before I reformatted.
Can someone help me convince Arch to let me boot again?
Last edited by mcmillan (2007-08-07 16:23:54)

Have you changed fstab on Arch's root partition?
Use some LiveCD (even Arch's installation CD will do) to do so.

LCD 100 Pro -- screens are dark

We are running 5 of these screens with the 4400 dmps. Since installing RS232 cables to allow use of Industry Weapon's Control IT module, the screens are now very dark. Adjusting color/contrast etc makes no difference. Even when the cables and the dmps are disconnected, the screens are still very dark.
has anyone else experienced anything similar with this screen?
Rose Ann

Hello Rosa Ann,
So if you:
- turn off the display with the switch on the back
- disconnect everything but the power cable
- turn the display back on again
Does the "Check Signal Cable" message on thescreen still looks dark?
You can press the 'menu' on the remote to see the menu and check colors/brightness...
If the menu is also dark please try Setup -> Reset -> Color Reset -> ok.
If this does not help then this is most likely a hardware problem .
Best regards, Peter

Windows 7 PRO 64-bit error on performing System Image

Error message when attempting "A System Image" on a Windows 7 Genuine PRO 64- bit Sony Vaio new Laptop:
"The request could not be performed because of an I/O device error".
Trying to backup on a new 3Tb WD My Book Essential External HDD,
Model: WDBACW0030HBK-NESN
Tried 2 different USB ports, still the same error.
The request could not be performed because of an I/O device error (0x8007045D)
And there is another error code: 0x80078002A
Below is the event log.
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 12/25/2010 7:16:04 PM
Event ID: 517
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Admin-VAIO
Description:
The backup operation that started at '?2010?-?12?-?26T03:15:14.102239200Z' has failed with following error code '2155348010' (One of the backup files could not be created.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>517</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2010-12-26T03:16:04.069127000Z" />
<EventRecordID>2142</EventRecordID>
<Correlation />
<Execution ProcessID="1796" ThreadID="184" />
<Channel>Application</Channel>
<Computer>Admin-VAIO</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTime">2010-12-26T03:15:14.102239200Z</Data>
<Data Name="ErrorCode">2155348010</Data>
<Data Name="ErrorMessage">%%2155348010</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 12/25/2010 7:10:24 PM
Event ID: 517
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Admin-VAIO
Description:
The backup operation that started at '?2010?-?12?-?26T03:09:30.572435800Z' has failed with following error code '2155348010' (One of the backup files could not be created.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>517</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2010-12-26T03:10:24.142929900Z" />
<EventRecordID>2135</EventRecordID>
<Correlation />
<Execution ProcessID="1796" ThreadID="4016" />
<Channel>Application</Channel>
<Computer>Admin-VAIO</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTime">2010-12-26T03:09:30.572435800Z</Data>
<Data Name="ErrorCode">2155348010</Data>
<Data Name="ErrorMessage">%%2155348010</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 12/25/2010 6:59:46 PM
Event ID: 517
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Admin-VAIO
Description:
The backup operation that started at '?2010?-?12?-?26T02:58:55.413502900Z' has failed with following error code '2155348010' (One of the backup files could not be created.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>517</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2010-12-26T02:59:46.066791900Z" />
<EventRecordID>2090</EventRecordID>
<Correlation />
<Execution ProcessID="5004" ThreadID="3976" />
<Channel>Application</Channel>
<Computer>Admin-VAIO</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTime">2010-12-26T02:58:55.413502900Z</Data>
<Data Name="ErrorCode">2155348010</Data>
<Data Name="ErrorMessage">%%2155348010</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 12/25/2010 6:56:51 PM
Event ID: 517
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Admin-VAIO
Description:
The backup operation that started at '?2010?-?12?-?26T02:56:05.545604700Z' has failed with following error code '2155348010' (One of the backup files could not be created.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>517</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2010-12-26T02:56:51.581285500Z" />
<EventRecordID>2089</EventRecordID>
<Correlation />
<Execution ProcessID="5004" ThreadID="3744" />
<Channel>Application</Channel>
<Computer>Admin-VAIO</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTime">2010-12-26T02:56:05.545604700Z</Data>
<Data Name="ErrorCode">2155348010</Data>
<Data Name="ErrorMessage">%%2155348010</Data>
</EventData>
</Event>
PS: the System Image went fine for the same laptop on another older 1Tb WD
My Book Essential External HDD.
Please help me as i tried the following but still the problem exists:
1. Stripped the drive to 2Tb
2. Stripped the drive to 1Tb
3. Formatted the drive in Windows to NTFS
Laptop Info:
Windows 7 Professional
64-bit
i5 CPU, 2.53Ghz
4Gb RAM
Thanks,
Grr

Hi,
If there is no error after the disk checking, please temporary disable antivirus, update BIOS and device drivers such as hard drive from computer manufacturer’s
website to check the result.
If the issue persists, I suggest you boot in Safe Mode, and clear the temp folder. Delete every files that can be deleted.
C:\Users\%username%\AppData\Local\Temp
In addition, the following threads would be helpful as well.
http://social.technet.microsoft.com/Forums/en-US/itprovistaapps/thread/7b64e871-71be-4c5d-a4a3-502744da978b
http://social.technet.microsoft.com/Forums/en/itprovistaapps/thread/9e5b22f1-8fb3-4d70-8f79-b92c7dc6e840
Thanks,
Simida
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I am trying to use logic pro 9 on my lion system and it continues to say I have a bad midi...when i go to check my midi drivers folders in my library its empty...does anyone know whats going on?

i am trying to use logic pro 9 on my lion system and it continues to say I have a bad midi...when i go to check my midi drivers folders in my library its empty...does anyone know whats going on?

I
got your message about making sure to use the machine specific disk that came with my machine. Unfortunately, Apple no longer sells Tiger replacement disks. I've got a couple of bids out on ebay, and will update when I have news to add to this post.
Thank you for your help, Frank!
To be clear you called the 800 number and explained what the situation was, old machine and lost the original DVD's?
Just checking because if you just called and tried to buy the DVD's they might tell you they no longer sell them but you aren't really trying to buy them your trying to replace the ones that are missing.
Ebay may work but there is a certain specificity to the DVD's required which, even if they seem right, might not work.
Good luck either way. If you get a chance when you get the DVD's I'd be interested in hearing how it all works out.
regards

Error checking transport group configuration in System BQS

Hi Everyone,
I made a client export from Production to Quality. It went successfully,, I noted the requests numbers and transported them from PRD to Quality, but while transporting there was a tp error(which i did not note), next i went to the quality import queue and saw all the 3 requests had come. But when i click the adjust queue icon im getting the following error message "Error checking transport group configuration in System BQS" . Afterwards i tried to delete the requests from quality to retransport from production but still im not able to delete those requests from quality. Can anyone help me solve this.
Regards,
Rahul

Hello Rahul,
regarding the error message:
"Error checking transport group configuration in system"
It's mostly related to the TMSADM RFC destination. Kindly follow the below mention steps:
1. Logon to client 000 with user DDIC.
2. STMS > System > Overview > Select the system in which you are logged in > Click on the menu says EXTRAS > Generate RFC Destinations
Perform the above steps in all the systems configure in your TMS. This should resolve the issue.
Best regards,
Tomas Black

Windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

Since Re-activation as suggested by the link above is not working for you, Can you please confirm the following:
The OperatorURL is reachable. ( you can find the operatorURL from the acsm file by opening it in notepad,etc)
And Book is still available on the book-store for purchase.
(If any of first two are not available, you might have to talk to distributor for next action item to get the book. Since you will have record of purchasing the book, (in my opinion) they should provide you the new token for downloading the book)
And please confirm this that you used the same userID for downloading that you used when you first fulfilled/downloaded the book.
(If it is the case, then you have to use the correct userID)
I hope it helps.

Can't load App Store on my macBook Pro. Error is; You cannont open the application "App Store" because it is not supported on this system. How can I upgrade App Store or download new version?

Can't load App Store on my macBook Pro. Error is; You cannont open the application "App Store" because it is not supported on this system. How can I upgrade App Store or download new version?

Problem now resolved as I upgraded to Snow Leopard 10.6. Seems App Store doesn't like anything previous to 10.6.

While doing MIGO transaction system showing error: Check table169P the entr

Hi experts,
while doing MIGO transaction system showing error: Check table169P the entry BP01 does not exit.
pls do needful.
Thanks&Regards
sreenivas.p

Hi,
Please specify Whether you are doing Blocking of Invoices or what?
As the T169P is A Parameters Invoice Verification, so you can check the values for T169P table in SE16 so that you will get Clear idea regarding company code BP01 in which the stochastic block is active with Threshold value for stochastic block...
Please check....
For maintaining Entries please go to OMRG maintain Company code and Threshold value as per client requirement so that This will specifies the degree of probability that an invoice is stochastically blocked.
Regards,
Ninad Kshirsagar

"An error occurred creating the application.Check file system permission"

Hi There ,
I am facing a problem in creating a webcenter portal webapplication.
I have followed the steps given in Help topics of Jdeveloper,but after performing all the steps i am getting this error
"An error occurred creating the application.Check file system permission". Kindly help me to get through this error.
Regards
Vivek

Hi Vivek,
I hope this is the problem with permission.you Don't have Admin permission to access those folder.
my Suggestion is
1.use Administrator account(on windows) for develop applications(its give full access to the folder from your system). or
2 open your JDeveloper as Administrator. (just right click on JDeveloper from you shortcuts or from programs run as Administrator)
I hope this will be helpful.
Best Regards
Siva Sankar

Can't print to my Canon Pro-100. Get error message:There was an error opening your printer. Printing

Can't print to my Canon Pro-100. Get error message:There was an error opening your printer. Printing functions will not be availableuntil you have selected a printerm and reopened any documants.

Your printer driver is having problems.
Resetting Photoshop's preferences sometimes clears it up (by removing previous print settings that the driver is supposed to read, but sometimes fails at).
Otherwise you'll have to work with Canon to figure out why the driver is misbehaving.

Cooling System Error

I have a Toshiba NB305-N442BL. I keep getting an error message that says there is a cooling system error and that I need to turn the computer off and return it for service. Some quick internet research shows that Toshiba has had a history of this exact problem (I've seen other people's screenshots of the exact error message I get), but I can't find a solution for my model. What should I do?

You can seek service by calling customer support at (800) 457-7777.
- Peter

LCD 100 PRO 40N error "Check Cooling System"

Similar Messages

Maybe you are looking for