Legal Control for export of sales. Consumption of license by sales order

We are running legal control for the export of sales of which we require export licenses for certain parts to specific partners, however, I am having difficulty in gettiing a sales order to consume the license thereby reducing the amount of new sales orders I can raise under the license.
For instance, I have a license to sell 50k and I raise a sales order for 45k, this should then only allow a sales order of upto 5k to be raised unfortunately the consumption is not happening and so therefore all future orders can utilise the license therefore allowing over shipment against the export license, a very serious matter.
I have created a license type that has 'maximum Amount specified' in transaction VE51 but no consumption takes place.
Any ideas?

Hi,
Try this link,
http://help.sap.com/erp2005_ehp_04/helpdata/EN/d2/cb4759455611d189710000e8322d00/frameset.htm
Cheers,
Shailabh

Similar Messages

Copy control for Text in Sales Order

Hi All,
i would like to check with you guys.
I have a scenario where by, we create sales order and maintain item text. This is copied to the delivery. Here the text if modified to enter more text.
But when it comes to invoice, it is copying the text from the sales order instead of the delivery.
How can I configure it to copy from delivery?

Hi,
Kindly check the following points:
1) Same text ids are present at Delivery item & Billing Item.
2) It at you want it at Item level text only then try through the ABAP routine at Copying Control between Delivery to Billing.
3)As u must have checked at Delivery --> Billing Document Copying control at item level , I didn't find any control for text.
Similarly for the Header. But by default Header text will overlap the item text as well due to the missing routine. But I have verified it in the past, if you maintain the same text at Delivery Header and it will populate at your billing document Header text as well.
Please try and confirm the same.
Thank You,
RB.

Copy control for opportunity to Sales order not working

Guys,
I am working on CRM 2007. I set up the copy control for transaction types so that I can convert my Custom Opportunity type to a Sales order.
However when I am in my Opportunity and click on Follow of transactions, my order type is not availabel in the selection list.
I was able to set it up for Lead to Opportunity but opportunity to Sales order is not working.
Any help on this?
Ani

HI Anirudh,
I have a similar requirement such as Copying line item from Complaints to Returns application.
Procedure:
1. Firstly i create an complaint
2. create a follow up document as Returns
3. I enter an product in the complaints and when i click on Copy to returns the line item has to be copied.
Here is the requirement. The line item is copied, but here the problem is, .... The line item doesn't get copied unless and until the instance of the target is retrived.
Could u please help me on this ?

Foreign Trade - Legal Control for scheduling agreements

We are on version 4.6C and I am setting up the legal control for my company. It seems to work quite well for sales orders but then when I went in to configure scheduling agreements it errors and tells me you cannot do legal control for document type "E" which are typically scheduling agreements.
I cannot find any documentation on this. Does anyone know why legal control does not work for scheduling agreements and/or is this functionality available in the Global Trade Services module??
Thanks in advance for any and all help!!
Debbie

Jean,
I have done a Foreign trade implementation.
The core team of the client are FT experts and they would tell you about the legal requirements. Your job is to map them in SAP FT.
In this process you would gain Knowledge about Foreign trade regulations of that country. Remember its country specific.
The ECCN's are provided by the client. Info abt the same is extensivley available on the NET.
You have to get the list of all the mtrls which fall under the controlled cantegory of the respective commerce ministry and then start the config setting these mtrls as relevant for FT checks.
Thanks
Vishal

Report for Pegging for forecast and sales order consumption(pegging)

Hi ,
Plaese help to create a report for the below
Requirement is there to have a showing Forecast (Number) and Sales order (Number) pegging Report
Means like to which forecast number the sales order number is consumed
Regards
Kiran

I have tested this on ASCP and I am agree with you. I am pasting one para from document...
"Oracle Master Scheduling/MRP and Supply Chain Planning calculates the ATP quantity of an item for each day of planned production by adding planned production during the period (planned orders and scheduled receipts) to the quantity on hand, and then subtracting all committed demand for the period (sales orders, component demand from planned orders, discrete jobs, and repetitive schedules).
Note: Committed demand does not include forecasted demand or manually entered master demand schedule entries. Also, the amount available during each period is not cumulative. Oracle Master Scheduling/MRP and Supply Chain Planning does not consider ATP quantities from prior periods as supply in future periods. "
Thanks and Regards,
Dipak

MRP area for running a sale order MRP

Hello PP experts,
I come across a scenario where , I need to do the MRP run for sale order in a MRP area. I have checked , I can put PIR with respect to MRP AREA , but when I open MD50 screen for running MRP for sale order. I did not found the MRP AREA
field in the screen.
In short , my question is , How the sale order MRP run , system will do in a MRP
area defined for the material ?
Here , I have already defined the material is MRP AREA and also I have created
MRP area segment in the material master.
I have also configured the MRP area in SPRO.
Waiting for your reply.
Regards,

Hello ,
Thanks for reply.
I am using plant MRP area. For FERT , I am using make to order strategy 20.
I want to specify the real problem. It is like below.
Suppose 'A ' is sumassembly goes to a variant configured MTO KMAT say 'V'.
The same 'A' subassembly is a child for a make to stock FERT say ' S'.
Presently using strtegy 11 for MTS fert 'S' and 10 for the subassembly ---'A'.
Now the planner want to plan for the subassembly.
He is putting the PIR for the subassembly as sales order is not availble and he is putting the PIR for FERT 'S'.
When sales order is coming then additinal quantity planning is happening.
So I suggested to use the strategy 70 for subassembly 'A' , so the sales order (of 'V') OF quantity will be offset for the PIR of the SUBASSEMBLY 'A'.
But the consumption of PIR of 'A' will be apllicable to MTS FERT that is 'S'.
So how can we prevent the system from offsetting the dependent requiremet triggered from the PIR of 'A'.
That means the consumption (that is the usage of stategy 70) of the FERT requirement should only work for ' A' and sales order based KMAT 'V'.
The same offseting should not work for subassembly 'A' and MTS FERT 'S'.
For for Make to order KAMT 'V' , if I use MRP area and do the sales order planning in MRP area. Will I get the desired result ?
Waiting for reply.
Regards,
Ravindra

How to control automatic rescheduling of sales order?

Hi all,
Could u please help me out to configure to control automatic rescheduling of sales order...
eg. I created a order on 13th March and the material was not available, then its was kept pending. But when the stocks got added on 19th March, the sales order got automatically rescheduled for 19th March.
I wish to stop this. Might have to do something with setting planned indepentent requirements which seems updating the order automatically.
Can anyone urgently help me out to control this automatic rescheduling?
Thanks in advance.

Hi Ravey
For your query , it is better not to change the Include sales requirements in OVZ9 as it will affect the entire sales order . But as per your ticket you have to customize in OVZ9 by not checking the Include sales requirements box only
But instead of that it is advisable to run V_V2 and change the date manually
Regards
Srinath

Proforma invoice for third party sales order

Hi,
How can we create a proforma invoice F5 and then standerd invoice F2 to a third party sales order.The billing relevance for TAS item category is set to B i.e.Relevant for order-related billing - status acc.to order qty
Points will surely be ragarded.
Regards
Edited by: Mrunal Ambatkar on Mar 5, 2010 5:00 PM

Hi,
Please check whether copy control (VTFA) settings between Sales order type (OR) and Proforma Invoice (F5) is avaiable.
If there is copy control setting available you can create the Proforma Invoice based upon sales doc type.
regards
Vivek.

Export production sales order to test

I'm wondering if there's a way to export a sales order from a production environment and import into a test environment. This would be used for troubleshooting purposes to deal with order issues without disrupting any production data.
We take periodic backups of our production environment to use as test environments but of course the issues you have with sales orders are the ones that are never in a test instance due to timing. To be able to export an order and import it into a test instance would save the need for someone to manually recreate the order, manually create inventory for it, manually shipment report it, etc.
I found one Metalink article about exporting it to a 3rd party environment (NOTE: 344695.1) using the oe_order_pub.get_order API's and custom PL/SQL scripts, but I'm hoping that an Oracle EBS-to-Oracle EBS move would potentially have a better/easier solution.
Thanks!
PS: this is in an 11.5.10 environment

you can do it using the load runner. Create the load runner scripts and extract the data from your prod instance and run the scripts in dev instance, that creates the complete new set of orders with your production data. Then you can complete the order cycle process.
Srini C

How to create a credit memo for an existing sales order !

Can any body help for how to create a credit memo for an existing sales order !

Hi,
It is actually possible to create credit memos from sales orders though it is not followed in most of the scenarios.
We have got a scenario in commodity trading that a sales order will be created with positive value. Once the swaps are settled by the portfolio mngt team, if we have to give some money to the payer, then a credit memo will be greated (as in their case all invoices will have only +ve value as net value) with reference to the sales order. In the copy control, the main field to be taken care of at itme level is the PRICING TYPE for which a value of F has to be maintained. This will convert the sign of the values and fix them. Now a credit memo will be created for teh saels order.
In this case, the document cateogyr of sales order will be C in VBAK, but it will be K in VBFA table which is the table for document flow.
Hope this answers your question. You can reward if it helps you.
Otherwise the normal process is
SALES ORDER---INVOICECREDIT MEMO REQUEST----CREDIT MEMO

Idoc not created for a particular sales order

Hi,
For a particular sales order , idoc is not created .
The idoc has to be generated when we create a sales order ,
but for a particular sales order , the idoc is not generated when the sales order is created. The program is assigned in
nace for output type zd00.
RSNASTED is the program which triggers the idoc and FM: IDOC_OUTPUT_ORDRSP.
How to debug and see why the idoc is not generated,
i had kept break point in idoc_output_ordrsp function module
and program rsnasted, but my control does not
reaches this point.
can anyone help me in this issue.
Thanks and regards,
A. thirumaran.
Edited by: thirumaran a on Jul 22, 2008 1:35 PM

Hi,
Could you please check if the output is processed or not, whether in the output type what all conditions you have maintained e.g send immediately.
Reward me point if you find this helpful.
regds.......
Sumit

BAPI_SALESORDER_CHANGE to update reason for rejection of sales order item

Hi,
The FM BAPI_SALESORDER_CHANGE is not working properly as I am getting below error when try to update the reason for rejection at sales order item level.
The delivery is done for this salesorder. Is it because the reason for rejection field is not as an input field when delivery done?
error in return table is " Field 'ABGRU' cannot be changed, VBAPKOM 000010 ready for input"
Request your suggestions to avoid this error.
Thanks

>
anikaushi wrote:
> Hi,
> The delivery is done for this salesorder. Is it because the reason for rejection field is not as an input field when delivery done?
>
> error in return table is " Field 'ABGRU' cannot be changed, VBAPKOM 000010 ready for input"
>
>
> Thanks
Yes, Most likely.. You can confirm this by trying to change a order without delivery and see if it goes thru (to ensure that you have passed correct parameters)...
you may have to delete the delivery (and if billing document exist, cancel it), before you can reject the line item... it would be safer to raise an error message and let the users manually delete delivery document as long as you don't have large volumes of this scenario..
Please see the SDN thread for how you can avoid this error...
Re: Cancel Sale Order after Issued Billing

Problem for releasing blocked sales order on Creditlimit

Hi Gurus,
        I a   hve a problem for releasing blocked sales orders
         what i have done: 1)i have blocked sales order based on exceeded creditlimit
         (i have change SDType in 'OVAK' is 'C')
                  2)now i have to release for furthur processing so i have done following steps
                  3)Goto VKM3/VKM1 T.Code and then release what order that is blocked.
                  4) order will appear in the list.
                  5)Select that one.
                  6)Click on the green flag that appears on the left hand side.
                  7)Click on save.
                  8)click on back it will ask for "Leave list".
                  9)Click on yes.
                  10)It said that Sales orer has been released
Still what my problem is:
Problem: 1)So i'm trying to create deliver for Sales order but it shows an error
         2)"Sales order is blocked for delivery: Credit limits" Even it was released
Plz kindly help me what i do....
Thanks In Advance
sivakumar

sorry   i was unfotunately put this thread here over in SD

Restriction of number of POs for a single Sales Order

Hi,
Currently, For a Single Sales Order multiple Purchase Orders are being created. Now, the Client wants to restrict number of Purchase Orders for a Single Sales Order that means, he wants only 1 Purchase Order for 1 Sales Order. Could you guys suggest how can I do this..? Is there any configuration for this ? Please suggest.
A quick reply would be very helpful.
Thanks in advance.

Hi Pavan,
In VA01 once you enter into the document and give the sold to party name below that you can see PO No there give only one PO no and and PO date based on the requested quantity the sale order will be created subsequent delivery and billing will happen.
Regards
Ram

Add new F4 (searchhelp) for material in sales order

Hi there!
I read the following related poste:
customisation of F4 for material in sales order
In that post Atul wanted to change an existing search help. My problem is differnet I think.
What I have:
In VA01 I have many different SearchHelps for the material: 9 standards and 2 from my serviceprovider. The standards have shortcuts M, A, H, K, L, N, O, P and S. The two custom ones have 2 and Y.
in MM03 I have even more different SearchHelps for the material: maybe 23 standards and 3 customized ones. The standards have the shortcuts M, A, B, C, E, F, H, I, J, K, L, N, O, P, R, S, T, V and W (then one without ?!?), then G, U. The custom ones are 1, 2, 3, Y.
I now want to use the searchhelp (for example) "I" (in german its "Artikel zur Liefarentenartikelnummer", so I think its about "Material from suppliermaterialnuber" in english) that I can use in MM03 as well in VA01.
Where do I have to customize / program things to do so?
Thanks in advance!

Works!
I had to include the Searchhelp MAT1I into the section "included searchhelps" of searchhelp SD_MAT1 within transaction SE11 and run the default parameter assignment (Button).
I know it was MAT1I because I looked it up in Searchhelp MAT1_A... just to round this ticket for maybe the next readers.

Legal Control for export of sales. Consumption of license by sales order

Similar Messages

Maybe you are looking for