Limit bandwidth per application

Hi there,
I am looking for a way to limit bandwidth per application under Mac OS X Lion ; either with a dedicated app or Terminal command.
I didnt find any tools with Google or App Store : does that mean "limiting bandwith" is a *bad* idea ?
The purpose is mainly to limit iTunes !
Thanks for advise.

I found a way to do this. It's a bit roundabout but it works. Rather than limit per application, you limit per server. For example I notice adobe creative cloud usually takes over my entire network connection when it's uploading a file to the cloud server, making it a pain to even browse the internet when it's sending a large file. Using little snitch's network monitor I see it's sending data to "creative.adobe.com", I enter that server into a program called speedlimit and set how much data it should send to that server. Fixed.
little snitch:
http://www.obdev.at/products/littlesnitch/index.html
speed limit:
http://mschrag.github.com/

Similar Messages

Throttle bandwidth per application in Mavericks

Hello. Is there a way of limiting bandwidth use per application in Mavericks? I use both wifi and a 3G stick to connect to the internet, depending on where I am. I would like to be able to limit the bandwidth for Skype and FaceTime when running on 3G so that video calls don't eat away my data plan. I sometimes need to make video calls with Skype or FaceTime, but I don't need a full HD resolution. A lower image quality would be perfectly fine, as long as the sound remains clear. So I'm looking for a front end application or Terminal command that would allow me to cap bandwidth for specific applications. I tried NoobProof, WaterRoof, PFlists and Entonnoir, but they have not been updated to 10.9 and LittleSnitch either allows or denies connections, intead of limiting bandwidth. I'd be grateful if you have any suggestions that could solve my problem. Thanks a lot!

You can use Ice Floor firewall and limit an outgoing port. That's as close as I've come to solving this issue. Since Skype and FaceTime use unique ports this would work in your situation.

Limit bandwidth per user/computer using Catalyst 3560 switch

Hi -
Can someone help me getting started (if at all possible...) with enabling controll of used bandwidth at a "per-user"-level.
I wonder if it possible to do this dynamicly with respect to the overall demand from other users.
I've searching a lot, but I'm missing the terminology :)
Sincerly
Nicholas

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
To my knowledge, what you want to accomplish isn't possible on a 3560.
You can police at ingress, and if you use a policy map, you can police different "known" IPs.
What you could do, is police user ports ingress at some nomimal bandwidth, and if exceeded, mark the packets. Then on egress, you could direct those packets to an different egress queue with a lower bandwidth guarantee than the normal queue.

Limit bandwidth per port switch/VLANs?

I am using a switch to create multiple VLANs. Each network has a separate VLAN port on my 3550 configured. I want to control the bandwidth that port uses and restrict it. Is is there a simple command to do this or will I need QoS.
Basically Fast0/1 - max bandwidth out/in (300K/400K)and so on..
thanks in advance!

You need to configure Policing that will limit the rate users can use going through a particular port/vlan.
Policing involves creating a policer that specifies the bandwidth limits for the traffic. Packets that exceed the limits are out of profile or nonconforming. Each policer specifies the action to take for packets that are in or out of profile. These actions, carried out by the marker, include passing through the packet without modification or dropping the packet.
This example shows how to create a policy map and attach it to an ingress interface. In the configuration, the IP standard ACL permits traffic from network 10.1.0.0. For traffic matching this classification, the DSCP value in the incoming packet is trusted. If the matched traffic exceeds an average traffic rate of 48000 bps and a normal burst size of 8000 bytes, its DSCP is dropped:
Switch(config)# access-list 1 permit 10.1.0.0 0.0.255.255
Switch(config)# class-map ipclass1
Switch(config-cmap)# match access-group 1
Switch(config-cmap)# exit
Switch(config)# policy-map flow1t
Switch(config-pmap)# class ipclass1
Switch(config-pmap-c)# trust dscp
Switch(config-pmap-c)# police 48000 8000 exceed-action drop
Switch(config-pmap-c)# exit
Switch(config-pmap)# exit
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# service-policy input flow1t
There is also example on aggregate policing. Here is a link on QoS:
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225see/scg/swqos.htm#wp1044737
Please rate helpful posts.

Limit bandwidth per IP with Speedtouch 780WL

I want to limit the bandwidth to certain IPs in my network. However, I have no idea how to do this. My router is Speedtouch 780WL. Are there some telnet options for this?

I suggest using a Linkys WRT54GL with tomato firmware. See also:
[Tomato] QoS Bandwidth limit for IP-range?
[Tomato] limiting bandwith on wireless side of wrt54g
Last edited by Kasumi_Ninja (2010-11-13 16:59:25)

How to limit bandwidth for guest per connection/user on 2504 WLC?

We have 2504 Controller with 24 AP's registered in a hotel and we would like to limit bandwidth per connection or per user.
I went to QOS Profiles > Bronze >
I do not see Per user Bandwidth Contracts(K)* instead I see WLAN QOS Parameters with below options.

Hello
Our WLC model 5508, but there is confusion on difference between Override Per-User Bandwidth Contracts (kbps) vs Override Per-SSID Bandwidth Contracts (kbps)
Our requirement-
On Guest SSID - Each user / session should not exceed bandwidth more than 758kbps upstream/downstream
Only Guest users cannot login to multiple device with single userID - applicable only to Guest SSID other SSID should not get impacted.
hope to get some response
cheers
ST

Maximum number of applications per application set

Hello,
I know maximum number of dimensions per application is 20 in OutlookSoft 4.2.
What about maximum number of applications per application set?
Regards,
Hiroshi Yaji

Hiroshi - I have not encountered a technical limit on the number of applications in an appset. As a practical reality, performance and system administration will dictate how many apps an appset may contain.
On a related note, you could theoretically have more than 20 dimensions in an app. However, I have only worked with one client who asked (needed?) an app with more than 12 dimensions. In that case, usability was an issue due to the complexity in submitting data to an app with that many dimensions.
Hope that helps,
Jeff

Limit Bandwidth on Family Network for Certain Computers ?

My sister is always downloading and streaming a bunch of movies/tv shows and i still have school. So...is there anyway to limit bandwidth on her computer (from her computer even) or possibly allocate more bandwidth to my computer. No permanant soloution is needed. I've also tried the common terminal command that supposedly increases personal bandwidth: ...
bash-3.2# sysctl -w net.inet.tcp.recvspace=65536
net.inet.tcp.recvspace: 65536 -> 65536
bash-3.2# sysctl -w net.inet.tcp.sendspace=65536
net.inet.tcp.sendspace: 65536 -> 65536
bash-3.2# sysctl -w net.inet.tcp.delayed_ack=0
net.inet.tcp.delayed_ack: 3 -> 0
bash-3.2# exit
...but havent had much success.
Any help would be appreciated
thanks

Unfortunately, the Apple routers do not have the ability to limit bandwidth on the network on a per device basis. It is first come, first served.

How to get the latest credit limit values per each customer in the report.

Hi All,
Can anybody give me an idea on how to get the latest credit limit values per each customer in the report.
I have below requiremnt.
I have cube which is having transactional data on document and customer level .and it also having master data info object in the cube which is credit management view having all the customer numbers .
This credit management view is master data info object having credit limit key figure as attribute.These credit limit are per each customer.
So we need these credit limits in the report as dynamic values .(I mean whatever be the current credit limit in the master data table for that paricular customer that should show up in the reporting).
one more thing these credit limits should roll up correctly at the HTR level.
One HTR having number of customers .
for example HTR 100 can have customer number 200,300,400.
Those 200,300,400 customer credit limits should roolup correctly at the HTR 100 level.
Example below :
Cube DATA :
HTR Customer Doct number Credit managment view
100 200 10001 200
100 200 10002 200
100 300 10004 300
100 300 10005 300
100 400 10006 400
100 400 10007 400
100 400 10008 400
Master data tabel (P Table)(Credit managment view)
Credit managment view Credit limits
200 1000.00
300 50000.00
400 90000.00
Please remeber :
We can not make these credit limits as navigational becasue these are keyfigure attributes not characteristics.
one more thing we can not make them as charatistics because we need use these credit limits to derive other calkculation. so it is not possibel to derive calculations on charactristics .

Create a formula variable of type replacement path with reference as attibutes of Credit management view and choose your key figure credit limit,say zcredit.
Now create a formula or CKF and use zcredit.
This should display the credit limit in your report as normal key figure.
I didnot get this part "one more thing these credit limits should roll up correctly at the HTR level.", may be the above will solve this too.Try it.
Hope this helps.

[svn:fx-trunk] 11575: Put default style declarations into one class per application or module.

Revision: 11575
Author:   [email protected]
Date:     2009-11-09 11:34:57 -0800 (Mon, 09 Nov 2009)
Log Message:
Put default style declarations into one class per application or module.
Generate all the default styles in one class instead of a class for each style. The name of the style class will be based on the application or module name. An application named ?\226?\128?\156foo?\226?\128?\157 will have a style class named ?\226?\128?\156_foo_Style?\226?\128?\157. The idea is to allow applications to be compiled with different themes and get their owns styles. Currently this is not possible because a global style in both themes will have the same class name, _globalStyle. Whatever class the top-level application loads the sub-applications and modules will have to use the same class because of the flash player first-class-in-wins rule. Now each application and module will have their own style class.
QE notes: None.
Doc notes: None.
Bugs: SDK-22454
Reviewer: Paul, Pete
Tests run: checkintests, all mustella tests.
Is noteworthy for integration: No.
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22454
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StyleDef.vm
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StylesContainer.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java

Revision: 11575
Author:   [email protected]
Date:     2009-11-09 11:34:57 -0800 (Mon, 09 Nov 2009)
Log Message:
Put default style declarations into one class per application or module.
Generate all the default styles in one class instead of a class for each style. The name of the style class will be based on the application or module name. An application named ?\226?\128?\156foo?\226?\128?\157 will have a style class named ?\226?\128?\156_foo_Style?\226?\128?\157. The idea is to allow applications to be compiled with different themes and get their owns styles. Currently this is not possible because a global style in both themes will have the same class name, _globalStyle. Whatever class the top-level application loads the sub-applications and modules will have to use the same class because of the flash player first-class-in-wins rule. Now each application and module will have their own style class.
QE notes: None.
Doc notes: None.
Bugs: SDK-22454
Reviewer: Paul, Pete
Tests run: checkintests, all mustella tests.
Is noteworthy for integration: No.
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22454
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StyleDef.vm
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StylesContainer.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java

How to set per application settings

This question was posted in response to the following article: http://help.adobe.com/en_US/ColdFusion/10.0/Admin/WSe61e35da8d31851842debae5134d0ab42ed-7f f9.html

The per-App mappings are missing the "/". The "MyMap" should be "/MyMap", in both examples in #2 under "To set the mappings per application".
Originally it was blogged that "/" wouldn't be required. But "/" became required in the final implementation.
Thanks,
-Aaron Neff

Does *new* Time Capsule let you limit bandwidth on guest connection?

I'm curious to know if the new dual-band Time Capsule/AEBS will let you limit bandwidth on the guest connection, or if it will suck up all the available bandwidth without restrictions?

I would say No to this. Apple wouldn't care much about bandwidth issue but I must admit that could be nice option to play with. But you never know.

ADF Logging ,need one file per application

Hi , I used the ADF logging api and I saw all log information on AdminServer.log . I need to have one file per application , ho it is possible ?
thanks

Hey,
You can follow the below link
http://adfandjdeveloper.blogspot.in/2013/07/use-adf-logger-in-adf-application.html
Thanks

How can one use one specific security realm per application ? The realm-name attribute of the login-config tag of web.xml does not make any difference

Hi,
I have different sets of users coming from different databases and using different
roles mapping for each of my web applications. I would like to configure a specific
security realm per application in my weblogic server 7.0 . Is it possible ?
I try to specify the realm-name of the login-config tag from the web-xml deployement
descriptor but it doesn't make any difference. The default realm is always used.
I also would like to tell the Weblogic server to use the default realm in case
the realm isn't specified or isn't found. For example, the default would contains
my admin users.
Thanks a lot for your answer.
Iz

I thik this is a common mistake the ralm-name tag in the deployment descriptor is used
just by the browser for display purposes (when it opens the basic auth dialog box) so as
of now there is only 1 active realm which can have multiple providers as Kevin pointed
out
Kevin Lewis wrote:
WebLogic 7 now ignores the realm-name tag (I found that out yesterday).
My understanding is that there is only one realm active at a time for a domain
(I would be interested in being contradicted in this).
However, you can have multiple providers in each category of a realm: authentication,
authorization, etc. Therefore, what you can do is key authentication, et al,
off of some other information. We have our users enter their company, for example,
and use the TextInputCallback to get it. You could also encode something in the
initial page, based on the URL they hit, or whatever, and get that back in your
callback.
You can store that information in your own Principal implementation, and key off
of that in your authorization provider, going to a different database as appropriate,
or abstaining when a specific provider doesn’t have anything to say about a subject.
Anyway, there should be a way to do it, even if it's more complex than you would
have hoped.
--Kevin

Can I rout audio on a PER APPLICATION basis?

Is there a way (third party software included) to rout audio on a *per application* basis? I'd like internet audio (Safari, etc.) to go to just the normal line out, while iTunes audio would be sent to digital audio out.

I've heard that audio hijack pro can do this.
http://www.rogueamoeba.com/audiohijackpro/
I don't use it myself but check this post for example
http://discussions.apple.com/thread.jspa?messageID=9299023&#9299023
Message was edited by: V.K.

Limit bandwidth per application

Similar Messages

Maybe you are looking for