Linking process of custom ANE strips too much symbols

Hello
I'm preparing custom ANE and facing interesting problem. I have prepared static library and putted it to ANE. I have compiled ANE and created demo project. Application is crashing in runtime because of undefined selector.
I have prepare native demo project with totally same library and it works like a charm. So I assume I have all symbols and correct architecture in my static library. I think linking process of ANE in air sdk strips too much symbols from static library and I cannot anyhow influence on it.
I can provide all projects to see the problem.
Any suggestions?
Thanks

The question was more about timeout settings if the chart can't be constructed. I would have hoped that the system would have worked out quickly that it couldn't create the chart and sent a message back.
In this web template the chart does run off a query that restricted the data to a manageable amount, but was also linked to the navigation block that caused the problem. We will remove that linkage.
In some cases, however, the user may ask for too much data (e.g. long date range), in which case I would expect a message.
Ken

Similar Messages

In the closure of Adobe, the process remains active and takes too much resource processor. Expected results:The process AdobRd32.exe has to be correctly closed.

In the closure of Adobe, the process remains active and takes too much resource processor.
Expected results:The process AdobRd32.exe has to be correctly closed.

I'm not sure on a Mac, but when I have this issue, I simply kill the thread (task-manager/processes/select the process, kill thread)
I have had no ill effects doing this.
It is my belief, it is the cloud, since they have a dcc connection, you can disconnect from the cloud, close everything, and the cloud is still connected to you. This is a feature of their update process I suppose.(speculation) Additionally, I remember reading somewhere this issue was due to applying administrative permission at the instigation of the installation. (which I do allow *some* trusted companies to have this so updates can be applied during my downtime. )
I have never had any overt issues after killing the thread and I have done that many times.
Hope this helps

CCME stripping too much!!

Hello folks,
i need to use 0 to aquire and outside line instead of 9.
the problem is that my CCME seems to be stripping the first two (leading) zeros
All worked fine when I used 9 to get an outside live - any ideas?
This is how I configured the CCME when I wanted to use 9 for an outside line………………… and all worked ok
voice translation-rule 9
rule 1 /^9/ //
!the below just sticks 020542 in front of their 4 digit extension
voice translation-rule 10
rule 1 /^11..$/ /020542\0/
voice translation-profile strip9
translate calling 10
translate called 9
dial-peer voice 1010 pots
translation-profile outgoing strip9
destination-pattern 9T
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind connect enable 8
progress_ind disconnect enable 8
port 0/0/0:15
I changed it to the below to use 0 to get an outside line – it seems to strip the first 2 0s?? instead of the leading 0??
voice translation-rule 9
rule 1 /^0/ //
!the below just sticks 020542 in front of their 4 digit extension
voice translation-rule 10
rule 1 /^11..$/ /020542\0/
voice translation-profile strip9
translate calling 10
translate called 9
dial-peer voice 1010 pots
translation-profile outgoing strip9
destination-pattern 0T
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind connect enable 8
progress_ind disconnect enable 8
port 0/0/0:15
here is a debug when I dial 0 00 44 075.........................
voip ccapi default debugging is on
DS-01#
*Sep 4 11:08:15.223: //-1/9A0728E18407/CCAPI/cc_api_display_ie_subfields:
   cc_api_call_setup_ind_common:
   cisco-username=1180
   ----- ccCallInfo IE subfields -----
   cisco-ani=1180
   cisco-anitype=0
   cisco-aniplan=0
   cisco-anipi=0
   cisco-anisi=1
   dest=000447500442636
   cisco-desttype=0
   cisco-destplan=0
   cisco-rdie=FFFFFFFF
   cisco-rdn=
   cisco-rdntype=0
   cisco-rdnplan=0
   cisco-rdnpi=-1
   cisco-rdnsi=-1
   cisco-redirectreason=-1   fwd_final_type =0
   final_redirectNumber =
   hunt_group_timeout =0
*Sep 4 11:08:15.223: //-1/9A0728E18407/CCAPI/cc_api_call_setup_ind_common:
   Interface=0x13D71B7C, Call Info(
   Calling Number=1180,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed),
   Called Number=000447500442636(TON=Unknown, NPI=Unknown),
   Calling Translated=FALSE, Subscriber Type Str=Unknown, FinalDestinationFlag=FALSE,
   Incoming Dial-peer=40001, Progress Indication=NULL(0), Calling
DS-01#IE Present=TRUE,
   Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=644
*Sep 4 11:08:15.223: //-1/9A0728E18407/CCAPI/ccCheckClipClir:
   In: Calling Number=1180(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed)
*Sep 4 11:08:15.223: //-1/9A0728E18407/CCAPI/ccCheckClipClir:
   Out: Calling Number=1180(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed)
*Sep 4 11:08:15.223: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Sep 4 11:08:15.223: :cc_get_feature_vsa malloc success
*Sep 4 11:08:15.223: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Sep 4 11:08:15.223: cc_get_feature_vsa count is 1
*Sep 4 11:08:15.223: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Sep 4 11:08:15.223: :FEATURE_VSA attributes are: feature_name:0,feature_time:17387448,feature_id:118
*Sep 4 11:08:15.223: //644/9A0728E18407/CCAPI/cc_api_call_setup_ind_common:
   Set Up Event Sent;
   Call Info(Calling Number=1180(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed),
   Called Number=000447500442636(TON=Unknown, NPI=Unknown))
*Sep 4 11:08:15.223: //644/9A0728E18407/CCAPI/cc_process_call_setup_ind:
   Event=0x25B46A0
*Sep 4 11:08:15.223: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:
   Try with the demoted called number 000447500442636
*Sep 4 11:08:15.223: //644/9A0728E18407/CCAPI/ccCallSetContext:
   Context=0x132C8FDC
*Sep 4 11:08:15.223: //644/9A0728E18407/CCAPI/cc_process_call_setup_ind:
   >>>>CCAPI handed cid 644 with tag 40001 to app "_ManagedAppProcess_Default"
*Sep 4 11:08:15.227: //644/9A0728E18407/CCAPI/ccCallSetupAck:
   Call Id=644
*Sep 4 11:08:15.227: //644/9A0728E18407/CCAPI/cc_api_set_transfer_info:
   Transfer Number=, Transfer Reason=0x0
*Sep 4 11:08:15.227: //644/9A0728E18407/CCAPI/ccSetDigitTimeouts:
   Initial Digit Timeout=10000(ms), Inter Digit Timeout=10000(ms)
*Sep 4 11:08:15.227: //644/9A0728E18407/CCAPI/ccSetDigitTimeouts:
   Call Entry(Inter Digit Timeout=10000(ms), Initial Digit Timeout=10000(ms))
*Sep 4 11:08:15.227: //644/9A0728E18407/CCAPI/ccCallReportDigits:
   (callID=0x284, digit_event=0x1, enable=TRUE, consume=FALSE)
*Sep 4 11:08:15.227: //644/9A0728E18407/CCAPI/ccCallReportDigits:
   Enabled=TRUE, Call Id=644
*Sep 4 11:08:15.271: //644/9A0728E18407/CCAPI/cc_api_call_report_digits_done:
   (vdbPtr=0x13D71B7C, callID=0x284, disp=0, digit_event=0x1, enable=TRUE, consume=FALSE)
*Sep 4 11:08:15.271: //644/9A0728E18407/CCAPI/cc_api_call_report_digits_done:
   Enabled=TRUE, Disposition=0x0, Interface=0x13D71B7C, Call Id=644
*Sep 4 11:08:15.271: //644/9A0728E18407/CCAPI/cc_api_call_report_digits_done:
   Call Entry(Initial Digit Timeout=10000(ms), Inter Digit Timeout=10000(ms))
DS-01#
DS-01#
*Sep 4 11:08:25.271: //644/9A0728E18407/CCAPI/cc_handle_inter_digit_timer:
   Generate inter-digit timeout CC_EV_CALL_DIGIT_END event
*Sep 4 11:08:25.271: //644/9A0728E18407/CCAPI/cc_handle_inter_digit_timer:
   Generate inter-digit timeout CC_EV_CALL_DIGIT_END event
*Sep 4 11:08:25.271: //644/9A0728E18407/CCAPI/ccCallReportDigits:
   (callID=0x284, digit_event=0x0, enable=FALSE, consume=FALSE)
*Sep 4 11:08:25.271: //644/9A0728E18407/CCAPI/ccCallReportDigits:
   Enabled=TRUE, Call Id=644
*Sep 4 11:08:25.271: //644/9A0728E18407/CCAPI/cc_api_call_report_digits_done:
   (vdbPtr=0x13D71B7C, callID=0x284, disp=0, digit_event=0x0, enable=FALSE, consume=FALSE)
*Sep 4 11:08:25.271: //644/9A0728E18407/CCAPI/cc_api_call_report_digits_done:
   Enabled=TRUE, Disposition=0x0, Interface=0x13D71B7C, Call Id=644
*Sep 4 11:08:25.271: //644/9A0728E18407/CCAPI/cc_api_call_report_digits_done:
   Call Entry(Initial Digit Timeout=10000(ms), Inter Digit Timeout=10000(ms))
*Sep 4 11:0
DS-01#8:25.271: //644/9A0728E18407/CCAPI/ccCallProceeding:
   Progress Indication=NULL(0)
*Sep 4 11:08:25.271: //644/9A0728E18407/CCAPI/ccCallSetupRequest:
   Destination=, Calling IE Present=TRUE, Mode=0,
   Outgoing Dial-peer=1010, Params=0x132CA59C, Progress Indication=ORIGINATING SIDE IS NON ISDN(3)
*Sep 4 11:08:25.271: //644/9A0728E18407/CCAPI/ccCheckClipClir:
   In: Calling Number=0205421180(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed)
*Sep 4 11:08:25.271: //644/9A0728E18407/CCAPI/ccCheckClipClir:
   Out: Calling Number=0205421180(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed)
*Sep 4 11:08:25.271: //644/9A0728E18407/CCAPI/ccCallSetupRequest:
   Destination Pattern=0T, Called Number=00447500442636, Digit Strip=TRUE
*Sep 4 11:08:25.271: //644/9A0728E18407/CCAPI/ccCallSetupRequest:
   Calling Number=0205421180(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed),
   Called Number=00447500442636(TON=Unknown, NPI=Unknown),
   Redirect Number=, Display Info=Saba
   Account Number=1180, Final Destination Flag=FALSE,
   Guid=9A0728E1-335A-11E4-8407-BF7BE74C6D37, Outgoing Dial-peer=1010
*Sep 4 11:08:25.271: //644/9A0728E18407/CCAPI/cc_api_display_ie_subfields:
   ccCallSetupRequest:
   cisco-username=1180
   ----- ccCallInfo IE subfields -----
   cisco-ani=0205421180
   cisco-anitype=0
   cisco-aniplan=0
   cisco-anipi=0
   cisco-anisi=1
   dest=00447500442636
   cisco-desttype=0
   cisco-destplan=0
   cisco-rdie=FFFFFFFF
   cisco-rdn=
   cisco-rdntype=0
   cisco-rdnplan=0
   cisco-rdnpi=-1
   cisco-rdnsi=-1
   cisco-redirectreason=-1   fwd_final_type =0
   final_redirectNumber =
   hunt_group_timeout =0
*Sep 4 11:08:25.271: //644/9A0728E18407/CCAPI/ccIFCallSetupRequestPrivate:
   Interface=0x2F2FD34, Interface Type=6, Destination=, Mode=0x0,
   Call Params(Calling Number=0205421180,(Calling Name=Saba)(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed),
   Called Number=00447500442636(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
   Subscriber Type Str=Unknown, FinalDestinationFlag=FALSE, Outgoing Dial-peer=1010, Call Count On=FALSE,
   Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Application Call Id=)
*Sep 4 11:08:25.271: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Sep 4 11:08:25.271: :cc_get_feature_vsa malloc success
*Sep 4 11:08:25.271: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Sep 4 11:08:25.271: cc_get_feature_vsa count is 2
*Sep 4 11:08:25.271: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Sep 4 11:08:25.271: :FEATURE_VSA attributes are: feature_name:0,feature_time:17387224,feature_id:119
*Sep 4 11:08:25.271: //645/9A0728E18407/CCAPI/ccIFCallSetupRequestPrivate:
   SPI Call Setup Request Is Success; Interface Type=6, FlowMode=1
*Sep 4 11:08:25.271: //645/9A0728E18407/CCAPI/ccCallSetContext:
   Context=0x132CA54C
*Sep 4 11:08:25.271: //644/9A0728E18407/CCAPI/ccSaveDialpeerTag:
   Outgoing Dial-peer=1010
*Sep 4 11:08:25.491: //645/9A0728E18407/CCAPI/cc_api_call_proceeding:
   Interface=0x2F2FD34, Progress Indication=NULL(0)
*Sep 4 11:08:25.779: //645/9A0728E18407/CCAPI/cc_api_call_alert:
   Interface=0x2F2FD34, Progress Indication=INBAND(8), Signal Indication=SIGNAL RINGBACK(1)
*Sep 4 11:08:25.779: //645/9A0728E18407/CCAPI/cc_api_call_alert:
   Call Entry(Retry Count=0, Responsed=TRUE)
*Sep 4 11:08:25.779: //644/9A0728E18407/CCAPI/ccCallAlert:
   Progress Indication=INBAND(8), Signal Indication=SIGNAL RINGBACK(1)
*Sep 4 11:08:25.779: //644/9A0728E18407/CCAPI/ccCallAlert:
   Call Entry(Responsed=TRUE, Alert Sent=TRUE)
*Sep 4 11:08:25.779: //644/9A0728E18407/CCAPI/ccConferenceCreate:
   (confID=0xFFFFFFFF, callID1=0x284, gcid=9A07C509-335A11E4-840ABF7B-E74C6D37, tag=0x0)
*Sep 4 11:08:25.779: //645/9A0728E18407/CCAPI/ccConferenceCreate:
   (confID=0xFFFFFFFF, callID2=0x285, gcid=9A07C509-335A11E4-840ABF7B-E74C6D37, tag=0x0)
*Sep 4 11:08:25.779: //644/9A0728E18407/CCAPI/ccConferenceCreate:
   Conference Id=0xFFFFFFFF, Call Id1=644, Call Id2=645, Tag=0x0
*Sep 4 11:08:25.779: //644/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Sep 4 11:08:25.779: cc_api_get_xcode_stream : 4936
*Sep 4 11:08:25.779: //644/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Sep 4 11:08:25.779: cc_api_get_xcode_stream : 4936
*Sep 4 11:08:25.779: //644/9A0728E18407/CCAPI/cc_api_bridge_done:
   Conference Id=0x4, Source Interface=0x13D71B7C, Source Call Id=644,
   Destination Call Id=645, Disposition=0x0, Tag=0x0
*Sep 4 11:08:25.779: //645/9A0728E18407/CCAPI/cc_api_bridge_done:
   Conference Id=0x4, Source Interface=0x2F2FD34, Source Call Id=645,
   Destination Call Id=644, Disposition=0x0, Tag=0xFFFFFFFF
*Sep 4 11:08:25.779: //644/9A0728E18407/CCAPI/cc_generic_bridge_done:
   Conference Id=0x4, Source Interface=0x2F2FD34, Source Call Id=645,
   Destination Call Id=644, Disposition=0x0, Tag=0xFFFFFFFF
*Sep 4 11:08:25.779: //644/9A0728E18407/CCAPI/ccConferenceCreate:
   Call Entry(Conference Id=0x4, Destination Call Id=645)
*Sep 4 11:08:25.779: //645/9A0728E18407/CCAPI/ccConferenceCreate:
   Call Entry(Conference Id=0x4, Destination Call Id=644)
*Sep 4 11:08:25.779: //644/9A0728E18407/CCAPI/ccConferenceCreate:
*Sep 4 11:08:25.779: confID:0x4; callEntry1 callID1:0x284, type:3; callEntry2 callID2:0x285, type:6
*Sep 4 11:08:25.779: //645/9A0728E18407/CCAPI/cc_api_caps_ind:
   Destination Interface=0x13D71B7C, Destination Call Id=644, Source Call Id=645,
   Caps(Codec=0x1, Fax Rate=0x1, Fax Version:=0, Vad=0x1,
   Modem=0x2, Codec Bytes=20, Signal Type=3)
*Sep 4 11:08:25.779: //645/9A0728E18407/CCAPI/cc_api_caps_ind:
   Caps(Playout Mode=1, Playout Initial=60(ms), Playout Min=40(ms),
   Playout Max=1000(ms), Fax Nom=300(ms))
*Sep 4 11:08:25.779: //644/9A0728E18407/CCAPI/cc_api_caps_ind:
   Destination Interface=0x2F2FD34, Destination Call Id=645, Source Call Id=644,
   Caps(Codec=0x1, Fax Rate=0x2, Fax Version:=0, Vad=0x1,
   Modem=0x0, Codec Bytes=160, Signal Type=2)
*Sep 4 11:08:25.779: //644/9A0728E18407/CCAPI/cc_api_caps_ind:
   Caps(Playout Mode=1, Playout Initial=60(ms), Playout Min=40(ms),
   Playout Max=1000(ms), Fax Nom=300(ms))
*Sep 4 11:08:25.779: //644/9A0728E18407/CCAPI/cc_api_caps_ack:
   Destination Interface=0x2F2FD34, Destination Call Id=645, Source Call Id=644,
   Caps(Codec=g711ulaw(0x1), Fax Rate=FAX_RATE_VOICE(0x2), Fax Version:=0, Vad=OFF(0x1),
   Modem=OFF(0x0), Codec Bytes=160, Signal Type=2, Seq Num Start=2382)
*Sep 4 11:08:25.779: //645/9A0728E18407/CCAPI/cc_api_caps_ack:
   Destination Interface=0x13D71B7C, Destination Call Id=644, Source Call Id=645,
   Caps(Codec=g711ulaw(0x1), Fax Rate=FAX_RATE_VOICE(0x2), Fax Version:=0, Vad=OFF(0x1),
   Modem=OFF(0x0), Codec Bytes=160, Signal Type=2, Seq Num Start=2382)
*Sep 4 11:08:25.779: //644/9A0728E18407/CCAPI/ccCallNotify:
   Data Bitmask=0x7, Call Id=644
*Sep 4 11:08:25.779: //644/9A0728E18407/CCAPI/cc_process_notify_bridge_done:
   Conference Id=0x4, Call Id1=644, Call Id2=645
*Sep 4 11:08:25.783: //645/9A0728E18407/CCAPI/cc_api_voice_mode_event:
   Call Id=645
*Sep 4 11:08:25.783: //645/9A0728E18407/CCAPI/cc_api_voice_mode_event:
   Call Entry(Context=0x132CA54C)
*Sep 4 11:08:29.283: //644/9A0728E18407/CCAPI/cc_api_call_disconnected:
   Cause Value=16, Interface=0x13D71B7C, Call Id=644
*Sep 4 11:08:29.283: //644/9A0728E18407/CCAPI/cc_api_call_disconnected:
   Call Entry(Responsed=TRUE, Cause Value=16, Retry Count=0)
*Sep 4 11:08:29.283: //644/9A0728E18407/CCAPI/ccConferenceDestroy:
   Conference Id=0x4, Tag=0x0
*Sep 4 11:08:29.283: //644/9A0728E18407/CCAPI/ccConferenceDestroy:
*Sep 4 11:08:29.283: confID:0x4; callEntry1 callID1:0x284, type:3; callEntry2 callID2:0x285, type:6
*Sep 4 11:08:29.283: //644/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Sep 4 11:08:29.283: cc_api_get_xcode_stream : 4936
*Sep 4 11:08:29.283: //645/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Sep 4 11:08:29.283: cc_api_get_xcode_stream : 4936
*Sep 4 11:08:29.283: //644/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Sep 4 11:08:29.283: cc_api_get_xcode_stream : 4936
*Sep 4 11:08:29.283: //644/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Sep 4 11:08:29.283: cc_api_get_xcode_stream : 4936
*Sep 4 11:08:29.283: //644/9A0728E18407/CCAPI/cc_set_post_tagdata:
   CALL_ERROR; Avlist Removal Is Failed
*Sep 4 11:08:29.283: //644/9A0728E18407/CCAPI/cc_api_bridge_drop_done:
   Conference Id=0x4, Source Interface=0x13D71B7C, Source Call Id=644,
   Destination Call Id=645, Disposition=0x0, Tag=0x0
*Sep 4 11:08:29.283: //645/9A0728E18407/CCAPI/cc_api_bridge_drop_done:
   Conference Id=0x4, Source Interface=0x2F2FD34, Source Call Id=645,
   Destination Call Id=644, Disposition=0x0, Tag=0x0
*Sep 4 11:08:29.283: //644/9A0728E18407/CCAPI/cc_generic_bridge_done:
   Conference Id=0x4, Source Interface=0x2F2FD34, Source Call Id=645,
   Destination Call Id=644, Disposition=0x0, Tag=0x0
*Sep 4 11:08:29.283: //645/9A0728E18407/CCAPI/ccCallDisconnect:
   Cause Value=16, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
*Sep 4 11:08:29.283: //645/9A0728E18407/CCAPI/ccCallDisconnect:
   Cause Value=16, Call Entry(Responsed=TRUE, Cause Value=16)
*Sep 4 11:08:29.283: //645/9A0728E18407/CCAPI/cc_api_get_transfer_info:
   Transfer Number=NULL
*Sep 4 11:08:29.283: //644/9A0728E18407/CCAPI/ccCallDisconnect:
   Cause Value=16, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=16)
*Sep 4 11:08:29.283: //644/9A0728E18407/CCAPI/ccCallDisconnect:
   Cause Value=16, Call Entry(Responsed=TRUE, Cause Value=16)
*Sep 4 11:08:29.323: //644/9A0728E18407/CCAPI/cc_api_call_disconnect_done:
   Disposition=0, Interface=0x13D71B7C, Tag=0x0, Call Id=644,
   Call Entry(Disconnect Cause=16, Voice Class Cause Code=0, Retry Count=0)
*Sep 4 11:08:29.323: //644/9A0728E18407/CCAPI/cc_api_call_disconnect_done:
   Call Disconnect Event Sent
*Sep 4 11:08:29.323: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
*Sep 4 11:08:29.323: :cc_free_feature_vsa freeing 1094FB0
*Sep 4 11:08:29.323: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
*Sep 4 11:08:29.323: vsacount in free is 1
*Sep 4 11:08:29.387: //645/9A0728E18407/CCAPI/cc_api_call_disconnect_done:
   Disposition=0, Interface=0x2F2FD34, Tag=0x0, Call Id=645,
   Call Entry(Disconnect Cause=16, Voice Class Cause Code=0, Retry Count=0)
*Sep 4 11:08:29.387: //645/9A0728E18407/CCAPI/cc_api_call_disconnect_done:
   Call Disconnect Event Sent
*Sep 4 11:08:29.387: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
*Sep 4 11:08:29.387: :cc_free_feature_vsa freeing 1094ED0
*Sep 4 11:08:29.387: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
*Sep 4 11:08:29.387: vsacount in free is 0
DS-01#
DS-01#
DS-01#
DS-01#u all
All possible debugging has been turned off
DS-01#

I fixed it myself - should I give myself points??
DS-01(config)#dial-peer voice 1010 pots
DS-01(config-dial-peer)#forw
DS-01(config-dial-peer)#forward-digits ?
<0-32> number of right-justified dialed digits to be forwarded
all     forward all destination digits
extra   extra dialed digits to be forwarded
DS-01(config-dial-peer)#forward-digits all
DS-01(config-dial-peer)#end
DS-01#

Customer service taking too much time

Hello all
I have blackberry curve 9300 and recently it started problem in speaker.I Submitted to nearest customer service center and i got it back after 20 days.I found that sound is working but now side keys were not working.I submitted it again and it again 20 days gone but they dont know how long it take.Please tell me what to do ?

The BlackBerry hardware warranty and technical support is covered by Airtel.
There is no "complaint email" for BlackBerry.
Contact info for BlackBerry is posted at www.blackberry.com/contact
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HTML Stripping -- too much memory

I have a program that takes data from a database and strips it of html tags. This is done over multiple tables. Some of the tables return a few thousand lines, but then others return about 65,000 lines. I open the file created and clean the needed fields with the following method. This causes an Out of Memory error with some of the larger files. Is there a better way to strip the html tags than I am using that would not throw this Out of Memory error?
      * Removes the html formatting for a string and stores it in a file
      * @return java.lang.String
      * @param htmlText java.lang.String
      * @param outputText java.lang.String
     public static String removeHtml(String htmlText) throws IOException
          String returnValue = "";
          EditorKit kit = new HTMLEditorKit();
          Document doc = kit.createDefaultDocument();
          // The Document class does not yet handle charset's properly.
          doc.putProperty("IgnoreCharsetDirective", Boolean.TRUE);
          try
               // Create a reader on the HTML content.
               Reader rd = new StringReader(htmlText);
               // Parse the HTML.
               kit.read(rd, doc, 0);
               //Set returnValue to cleaned text
               returnValue = doc.getText(0, doc.getLength()).toString();
               rd.close();
               doc = null;
               kit = null;
          catch (Exception e)
               System.out.println ("ERROR: " + e.getMessage());
               e.printStackTrace();
          return returnValue;
     }

There is a fairly trivial way where you just copy the characters from the input to the output, except for the following rules:
1. When the input character is '<', stop writing characters to the output (including this one).
2. When the input character is '>', start writing characters to the output (after this one).
However this may stumble on malformed HTML, for example if the '<' character appears unescaped in text. I don't know if your data suffers from this problem or not.

Why it is taking too much time to kill the process?

Hi All,
Today,one of my user ran the calc script and the process is taking too much time, then i kill the process. I am wondering about one thing here even it is taking too long to kill the process, generally it will not take more than 2 sec. I did this through EAS.
After that I ran Maxl statement
alter system kill request 552599515;
there is no use at all.
Please reply if you have any solutions to kill this process.
Thanks in advance.
Ram.

Hi Ram,
1. Firstly, How much time does your calculation scripts normally run.
2. While it was running, you can go to the logs and monitor where exactly the script is taking time .
3. Sometimes, it does take time to cancel a transaction ( as it might be in between).
4. Maxl is always good to kill ,as you did . It should be succesful . Check the logs what it says ,and also the "sessions" which might say "terminating" and finish it off.
5. If nothing works ,and in the worst case scenarion , if its taking time without doing anything. Then log off all the users and stop the databas and start it .
6. Do log off all the users, so that you dont corrupt any filter related sec file.
Be very careful , if its production ( and I assume you have latest backups)
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

IPad Air too much time to open a link from Mail

SInce the last update to iOS 8.02 my iPad Air takes too much time to open a web link from the Mail App, Safari open itself with a long delay.
furthermore The attachments into email are often not readable, have to reload the message to be able to open the attachment.
LAst but not least, I have too many messages not downloaded from the iMap server and I can read just the title of it.

There's a large thread around about this Dolphin problem.
Disabling Nepomuk in System Settings has proved to be the
cure in many cases.
Deej

Server0 process taking too much time

Hi All,
Once i start the Netweaver server, the server) process taking too much time.
When i was installed Netweaver that time 13 min, after 2 months 18 min.. then 25 min now it is taking 35 minutes.... to become green color.
Why it is taking too much time, what might be the cause.....
Give some ideas to solve this problem..............
The server0 developer trace has this information continuously 6 to 7 times...
[Thr 4204] *************** STISEND ***************
[Thr 4204] STISEND: conversation_ID: 86244265
[Thr 4204] STISEND: sending 427 bytes
[Thr 4204] STISearchConv: found conv without search
[Thr 4204] STISEND: send synchronously
[Thr 4204] STISEND GW_TOTAL_SAPSEND_HDR_LEN: 88
[Thr 4204] NiIWrite: hdl 0 sent data (wrt=515,pac=1,MESG_IO)
[Thr 4204] STIAsSendToGw: Send to Gateway o.k.
[Thr 4204] STIAsRcvFromGw: timeout value: -1
[Thr 4204] NiIRead: hdl 0 recv would block (errno=EAGAIN)
[Thr 4204] NiIRead: hdl 0 received data (rcd=3407,pac=2,MESG_IO)
[Thr 4204] STIAsRcvFromGw: Receive from Gateway o.k.
[Thr 4204] STISEND: data_received: CM_COMPLETE_DATA_RECEIVED
[Thr 4204] STISEND: received_length: 3327
[Thr 4204] STISEND: status_received: CM_SEND_RECEIVED
[Thr 4204] STISEND: request_to_send_received: CM_REQ_TO_SEND_NOT_RECEIVED
[Thr 4204] STISEND: ok
[Thr 4204] STIRCV: new buffer state = BUFFER_EMPTY
[Thr 4204] STIRCV: ok
[Thr 4204] *************** STSEND ***************
[Thr 4204] STSEND: conversation_ID: 86244265
[Thr 4204] STISearchConv: found conv without search
[Thr 4204] STSEND: new buffer state = BUFFER_DATA
[Thr 4204] STSEND: 106 bytes buffered
[Thr 4204] *************** STIRCV ***************
[Thr 4204] STIRCV: conversation_ID: 86244265
[Thr 4204] STIRCV: requested_length: 16000 bytes
[Thr 4204] STISearchConv: found conv without search
[Thr 4204] STIRCV: send 106 buffered bytes before receive
[Thr 4204] STIRCV: new buffer state = BUFFER_DATA2
[Thr 4204] *************** STISEND ***************
then
[Thr 4252] JHVM_NativeGetParam: get profile parameter DIR_PERF
[Thr 4252] JHVM_NativeGetParam: return profile parameter DIR_PERF=C:\usr\sap\PRFCLOG
this message continuously
Can i have any solution for the above problem let me know .
Thanks & regards,
Sridhar M.

Hello Manoj,
Thanks for your quick response, Previously the server has 4GB RAM and now also it has same.
Yesterday i found some more information, like deployed(through SDM) applications also take some memory at the time of starting the J2EE server...Is it right?
Any other cause...let me know
Thanks & Regards,
Sridhar M.

Playing Video files taking too much CPU processing(50 % )

Hello everyone,
My macbook taking too much CPU processing power for playing Video file.Below shared the statistics..Is it a issue..? can you please help me here..I can't play simultaneously 2-3 MKV videos..distorted picture Quality.
Macbook:
mkv
     Qucik Time PLayer (using perian plugin):50%
     vlc:40%
      mplayer:60%
normal(example Mp4)
     Qucik Time PLayer (using perian plugin):30%
     vlc:25%
where a normal Linux system takes
mkv file with VLC : 20-25%
Thanks in advance...

Simple thing to try would be to disable composite and see how you fare then
Check the logs first, though

Too much zooming in NI-HyperTrend locks lookout process.

I'm using lookout 5.0 over W2K. When I try to zoom-in too much in NI-HyperTrend (Activex control object) Lookout locks and hence I have to end process using the Windows Task Manager. I'm using '+' icon to zoom in. Any idea? (urgent)

Hello Patrick R.
thank you for your message. The pc on which the lookout process (only one process) runs, is dedicated for a Fieldpoint string. Pc communicates with FP-1600 (ethernet comm module) directly. FP string we have 8 modules(2 x AI-100, 1x RLY-420 and 5x RTD-122). Total I/O number is 55. Several NI-hypertrend objects (activex control objects) display several (4 to 36) signals. The signals are logged to the citadel database at local hd. There is no other application running meanwhile.
Cliking frequency of zoom button is normal (2-4 Hz). It doesn't matter if we stop the graph or not. after zooming the cpu usage peaks to 98-99 percent and then we are to end the lookout application.
The system is on site. I tried also in office using lookout5.0/examples/ap
plications/batch2.l4p . I create a new NI-hypertrend and insert several traces. it locks up after deep zoming. This phenomena repeats itself randomly. I tried after once more but I was unable to lock it. I think that the trend chart cannot follow the fast changing data.
thanks for your action.
kemal (knk).

Why do I have to run the plug-in container in my processes constantly in this version? It takes up too much memory!

The earlier version of Firefox did not run this plug-in container. Every time I would remove it from my processes it would kill videos etc. But, it was all fine in the older version of Firefox, so why the change? So I chose not to update Firefox. Then, the other day, I saw that is was automatically downloading and I turned off my computer because it wouldn't stop and I didn't give permission. When I got home I could not use Firefox and it took me hours to figure out how to get the internet back. Then I got Firefox back and this stupid process is running again. It takes up too much memory. I don't like a bunch of extra processes running like that. So, why can't I just use the old version? Is this process absolutely necessary?

In the past the memory usage would end up as part of the Firefox program. Now with OOPP you can see it as a separate process and that makes it more noticeable.
You can disable OOP if you want.<br />
See http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
Your above posted system details show outdated plugin(s) with known security and stability risks.
# Shockwave Flash 10.0 r42
# Next Generation Java Plug-in 1.6.0_18 for Mozilla browsers
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
I don't know if these three with different copyright dates are all needed:
# Version 0.9.17, copyright 2008-2010 Veetle Inchttp://www.veetle.com/
# Version 0.9.17, Copyright 2006-2009 Veetle Inchttp://www.veetle.com/
# Version 0.9.17, copyright 2006-2010 Veetle Inchttp://www.veetle.com/

Some process cpu usage too much!!

I have many problem when update Mountain Lion.
some process are too much usage cpu .
iMac Processor : 3.4GHz Intel Core i7
Ram : 16GB 1333 MHz DDR3
Problem Process:
- safari web content.
- image capture extension.
- mdworker
There are usage too much cpu , so iMac too slow!!!
Please solve it .

I have the same problem here, my MacBook Air barely goes to 60ºC while doing normal tasks, but as I edit video in iMovie (or even just letting iMovie open without doing anything) is gets near 100ºC because my CPU load is always very high!
Can someone explain this?

SYSTEM IDLE PROCESS SHOWING TOO MUCH CPU USAGE

I Have problem with system idle process showing too much cpu usage.but the process is normal.nothing more else.my laptop is toshiba satelite pro m300.pls give the solution as earliest as possible.

Without knowing the excat model or what software, hardware or external components are running CPU usage is just an average measurement. If you have alot of background components/software running can cause a high reading, as it you allowed updating to runn consistently, or IM Messenger to consistently gain access.

ICloud photos process takes too much network resources

Photos of iCloud process takes too much network resources in the background and slows down a lot the iMAC. Almost impossible to navigate or use applications that uses internet connections.
I would like to pause the process or to configure it somehow to prevent excesive network utilization.

Do you have iPhoto setup to import all Photo Stream photos into your library? If so uncheck the circled checkbox in this screenshot and see if that will speed up things:
You'll have to manually import from the Photo Stream after that.
OT

Oracle Instances Processes consuming too much memory

Will somebody be able to guide me with the factors that are causing too much memory consumption when a single Oracle.exe instance is started ? Due to this problem it is not possible to run 2 instances at the same time.
Oracle is running on Windows NT 4.0 SP6.
Oracle version 8.1.6.0.0
Currently we have 512MBytes of ram.(4.83G free space)
One of the Instance consumes as much as 178,320K of Ram,
another consumes about 138,000K

Oracle consumes as much memory as you want, but more memory is faster.
Review your init.ora (db_block_buffer y shared_pool_size)
(It4s posible to run 10 instances in a machine with just 1 Gigabyte and they work fine. It depends on the use of the databases, the number of users, just for production or development, etc, ...).

Linking process of custom ANE strips too much symbols

Similar Messages

Maybe you are looking for