Live Cycle Form problems - bug or user error?

At work my assistant and I have created an interactive form from an Excel spreadsheet and then proceeded to add drop down boxes in numerous locations on the form. However, when we try to create a pdf in live cycle (8), the drop down boxes pre-populates with the first alpha-numeric character option in the drop down list, instead of a blank space, which is the default state. In addition, the tabbing between the drop down boxes becomes random and I am unable to change them. The form is six pages long, with about twenty to thirty drop down boxes on each page (I think - I don't have the form with me now - on my work computer). Either way - it is a pretty big form. The weird part is that when I split the form in smaller sections (i.e. one page at a time, the problems described above does not happen. I also have numerous other (shorter) forms that work just fine. Is there some sort of size or complexity limitation that is causing this, or is there another way to get around this? The only thing I could do so far to get it to work is to remove the drop down boxes and just make them text entry fields. Any advice would be appreciated.

1. How are you converting from XLSX to PDF. Are you printing the file ato PDF then adding the fields after the fact?
2. I was able to change the tabbing order using the tabbing tool (under the View menu). Moving the fields in the hoierarchy will not affect the tabbing order in this case. By default it is left to right - top to bottom. So if you move the fields on the page then it will affect tabbing order. You really shodul be doing this via the tabbing tool.
3. On teh version that you sent it was showing a blank entry for all DDLists until you selected an item.
Note that I am using version 9 of Acrobat/Reader and version 8.2.1. of Designer.
Paul

Similar Messages

  • Pdf live cycle  form through sap abap editor to validate user input by java script coding

    I am new to apply a java script in a Adobe form.
    So i need of help that i have 9 page form of HR module i need to verify every blank field and wrong entry field also.
    I look around a lot of code but still i am not able to perform good validation in a Adobe form.
    I am using SAP ABAP editor where i am making through PDF Live cycle FORM & try to put java script validation on the field.
    My problem is that how can i link or configured to Adobe form.
    Here are some event are given "mouseup","validate" or more are given.So how i can do.
    i wrote the code like
    / Get the field value
    var f1 = this.getField("VORNA");----why it is not working.Some thing is wrong?
    var v1 = f1.valueAsString;
    if (v1) {
    } else {
       app.alert("Field: " + f1.name + " is blank.", 1);
    //above code is not working.
    but here we used rawValue() method it works , but it popup message  javascript with window error.
    if( this.rawValue()==' ' || this.rawValue==null)---------this works
    xfa.host.MessageBox("First name is blank!");---------this works
    "VORNA" is "First name" field name binding with this value.
    How we can linked java script file with Adobe form.
    Kindly help me

    You're mixing code for an acroform with code for an XFA form. SInce you're creating the form with LiveCycle Designer, it wold be better if you posted this to the LiveCycle Designer forum, if you haven't already.

  • Hide Navigation Panel buttons in left side of live cycle form

    Hi, i need to "Hide Navigation Panel buttons" in the left side of the live cycle form when its open in the workspace using scripts, so the user no need to right click each time to Hide it,
    thank you

    Hi,
    Sweet, good to know
    Thanks
    Radzmar.
    Regards
    Malcolm

  • PayPal and Live Cycle Forms

    I have a calculated "Total Amount" field on a Live Cycle generated form.  I would like to take that calculated value and export it to our payment pages on PayPal's secure online network.  On our website, we simply add some code to the page and, when clicked, the button takes you into PayPal's secure pages.  Is there a way to accomplish this in a Live Cycle generated form?  Do I convert the html code into xml?
    Please help - I am a novice user and, although I am learning quite a bit, I still have miles to go in this program.    We are a small not-for-profit organization with very limited resources. Any and all help will be appreciated.  Thanks very much.

    Dan, I've been thinking about this.  A couple of questions about your form. First, have you tested the submit form email functions, and does it work properly?  Second, do you have the ability to build a web page that can redirect to PayPal when it's accessed?
    I'm thinking that we can modify your form to use script behind a regular button rather than the stock email button.  First the script would fire off an email, then it would redirect to the url of the web page that you build, which can forward to PayPal.  If you need info from the form it can be included in the url as a parameter and the web page can grab it.
    Another idea would be to go directly to PayPal from the form, without the web page middleman, but I don't know what is done behind the scenes on your web site to get there.
    First, I'd like to make sure that changing the email method still works the same way as the old method of using the email button.

  • Submit Warning Live Cycle Form (with Chunk)

    Hi,
    I have created some pdf forms with Live Cycle Designer and save them in my database as base64 string.
    I created XDP with formdata and CHUNK of this pdf form from database and show this XDP on browser. This all works fine. but when user tries to Click Submit button it displays message "This document has access more then one site and might trying to share data among different location. This could be a privacy concern....."
    I understand i'm using chnuk and my base64 string (of PDF form ) is in database. but it needed. Also i am assigning the Submit URL on runtime.
    This code is written in Live Cycle button Init Javascript this.resolveNode("#event").submit.target= txtFieldSubmitURLH.rawValue + "Close.aspx";
    pls help.

    1. How are you converting from XLSX to PDF. Are you printing the file ato PDF then adding the fields after the fact?
    2. I was able to change the tabbing order using the tabbing tool (under the View menu). Moving the fields in the hoierarchy will not affect the tabbing order in this case. By default it is left to right - top to bottom. So if you move the fields on the page then it will affect tabbing order. You really shodul be doing this via the tabbing tool.
    3. On teh version that you sent it was showing a blank entry for all DDLists until you selected an item.
    Note that I am using version 9 of Acrobat/Reader and version 8.2.1. of Designer.
    Paul

  • Fill out live cycle forms

    How can I fill out adobe live cycle forms

    Currently, Adobe Reader mobile products (Reader for iOS, Android, Windows Phone) do not support static or dynamic XFA forms created with Adobe LiveCycle Designer.
    The following blog post by Jeff Stanier (Adobe LiveCycle Designer Product Manager) explains the reason why XFA forms are not supported on mobile.
    Adobe Reader Mobile and XFA forms from LiveCycle Designer
    You can use the desktop version of Adobe Reader on a Windows or Mac computer to fill out XFA forms.
    Sorry for the inconvenience.

  • Adobe live cycle form

    Hi Guru's
    I would like to know pre-requisites for adobe live cycle and is this tool installed in frontend systems (sap gui) or on sap servers and we  have only  abap stack in our landscape so please give some clarification it will be very helpfull
    Regards
    Mohammed

    These links may help you...
    SAP Interactive Forms by Adobe - ABAP Development - SCN Wiki
    adobe forms layout editor not working
    and ask basis person to install Adobe Live Cycle Designer 7.* or later to download & install in you system
    thanks
    Jyoti

  • Timestamp of videos not consistent with photos - appear out of order - bug or user error?

    We just returned from Hawaii and, of course, we have a mix of photos and videos.  However, subsequent photos and videos taken about the same time, which should have timestamps minutes apart, have timestamps that differ by 4 hours.  As I dig into this deeper, it seems all the videos have timestamps 4 hours from what they should be(my view).  At a minimum, I believe the photo and video timestamp should be set per a consistent definition.
    I am determining this after I imported the pictures into iPhoto.  I have done the import several times and the results are consisent.
    Example:
    IMG_0233.JPG - April 6, 2013 6:14:46 PM
    IMG_0234.MOV - April 6, 2013 11:15:08 PM <----This should be 6:15:46 PM
    Tried to verify the timestamp of the video and photo while the picture is on the iPhone…had to buy iPhoto for IOS for $5. The photo timestamp is the same as stated in iPhoto(IOW, IMG_0233.JPG is 6:14), but the video timestamp is just April 6, 2013…no exact time. Guess I wasted $5.
    Computer Data:Mac Mini 2.3Ghz Intel Core i5 - 8GB Memory - OS X 10.8.3
    Iphoto 11 9.4.3
    Phone Data:
    iPhone 5
    iOS 6.1.3
    Date & Time preference:  'Set Automatically'=ON
    Travel Timezone where pics taken: Hawaii - GMT-10
    Home Timezone: Chicago - normally GMT-6(4 hour difference from Hawaii), but right now Chicago is GMT-5 due to daylight savings.
    My theory is that there is a bug that sets the video timestamp to the 'home timezone', potentially only when 'automatic timezone is set.
    This seems easily fixed by doing a batch change to adjust the timestamp on all videos
    Any other explanations?  I am hoping I am doing something wrong.

    2 things...
    1) my opening paragraph says 4 hours, but it should be 5. DOH
    2) i just imported a bunch of pictures and videos from an android phone.  Same issues.  The Android photos seem to be perfectly aligned with the photos from the iphone 5, but the videos are 5 hours off the mark(later).  Of course, I want to view the pictures with the time in Hawaii, not Central Time, so the videos are definitely in the wrong from an intuitive standpoint...as I see it.
    2013-04-09 11.14.25.jpg - Taken at 11:14am in Hawaii.  This data is per the file as it sits in dropbox and viewed by my mac mini Finder.  Android puts the file on drop box from the phone, and I imported to iphoto from dropbox.  Despite the filename indicating 11:14am, finder says the file was created at 4:14pm.  However, iPhoto, correctly puts a timestamp of 11:14am and picture is where I expect it from a time standpoint at 11:14am.
    2013-04-09 11.15.05.mp4 - Taken at 11:15am in Hawaii.  This was imported into iPhoto via dropbox at the same time, but it is showing up in iPhoto at 4:15pm, throwing off the sorting.
    So, now I believe I have an iPhoto issue and probably brought this question to the wrong forum?
    I have fixed the problem by doing a 'adjust time and date' to all videos, both from iphone and android, to be 5 hours earlier in time.  Now everything lines up, but I am scratching my head why this isn't done consisently between photo and video in iPhoto, and why I have not run into this before.....

  • ARC mandatory property lost (bug or user error?)

    I have a few entities with an ARC relation. In the logincal model one can't set this  to mandatory or optional. (as far as I know).
    This leads to a annoying issue:
    The property can be set in the relation model by clicking on the arc. So far so good.
    When I make changes in the logical model and engineer to relational model the mandatory property switches back to optional.
    What am I doing wrong?
    BTW hope someone reads this
    As a feature request it would improve users productivity if one could click the header of the name column in the Property Propagation dialog.
    That would make selection much more efficient.

    Thank you Philip
    Just to verify if I was clear and your answer solves the case .
    I try to achieve to make this arc mandatory:
    Now the only way to achive this is to click and set property on arc below.
    Then one of the two optional cols must be set:
    That setting is lost when I engineer from logical to relational again.
    Thanks for logging the ER and Bug!

  • Versioned or old data in Live Cycle Form?

    While working with LiveCycle forms, we received one from a customer that had an odd behavior.  When looking at it through Acrobat reader, we got the data we expected.  When attempting to use some other tools to extract data, we got a whole other set of data for the forms.
    Our customer(s) use the form as a template, pastes the latest data into the form, and then uses Save As to create a final copy to send to us.  Using some Linux tools we found that the form was actually maintaining at least three different sets data that had been used to fill the form. It turns out that the Acrobat products were reading the latest data, while our other tools were picking up the first set.
    First the important question:  Is there some sort of versioning switch or command I can use to ensure that the form contains ONLY the latest set of data?
    Less important but interesting question:  Why is the form saving this old data, and how much bloat can be expected?
    Thank you in advance.

    We are experiencing a similar issue.  It appears that the form saves data that has been put into the form.  I don't know if it is some sort of versioning, or an error.  I, too, have asked if there is some way to "turn off" this behavior 
    I would appreciate it if you keep me in mind should you receive an answer to this question.

  • Bug or User Error - Virtual Copy

    All,
    I'm still on 1.3.1 (still too much dust flying on 1.4.1), Mac OS X 10.4. The situation is as follows: Took a standard RAW image file from Canon 40D.
    1. Made a virtual copy of the original, crop aspect set to 8x10, made adjustments, etc. including some spot removal, etc.
    2. Made a virtual copy of the virtual copy, converted to Grayscale, "assumed" the crop value and spot removals came with it. Instead, the second virtual copy is showing up with a crop value of 4x5 and the spots removed in the first virtual copy, return.
    It is very repeatable, and not associated with a specific image file. I haven't tried it on Windows XP yet.
    Jay S.

    Hal,
    I've been doing a little more with this. In Develop module, if I make a Virtual Copy of an image where I've used a Metadata preset to add some data to the image, that metadata preset is refected in the virtual copy as well, if I do the same exact thing with the same exact image in Library mode, the metadata is set to None, as opposed to the Preset I used with the original.
    I know this is different from what I originally stated but seems odd. Also I'm not sure why you don't consider it a bug, small as it may be. I set the original to 8x10, if I wanted the lower ratio of 4x5, I would have set it to that. If 8x10 didn't matter to Adobe then why have it as an option. In my mind the Virtual Copy should reflect the same choice made on the original.
    Jay S.

  • Lines disappearing on Master Slide (Bug or User error?)

    Hi all -
    I'm using the "Magic Move" feature on one of the Master slides from a theme called "Blueprint". When I use Magic Move some of the "permanent" lines from the master slide disappear during the move and then reappear when the move is finished. Any suggestions for solving this problems would be greatly appreciated.

    Thanks Ken -
    I moved my presentation to several other themes, but the problem seems to extend to those Master Slides as well. All of my elements (photos, text, etc.) come through the transitions just fine, but some of the lines on the Master Slide itself disappear while the transition takes place. It makes the whole thing pointless it the viewer can see this, and there's no way to change the master or stop this from happening. Hopefully Apple will take a look.

  • Creating fillable forms with Live Cycle that can be emailed, saved, printed, etc. by anyone!

    So I started using livecycle because the forms one can make are astounding, its a great program except for sending the forms out to be filled in especially to those only with reader. I've looked over a lot of past discussions and the answers seemed too complicated. Here is a workaround for not so computer savy folks like myself.
    First, create your form, use everything the software has to offer to make your form exactly like you want and yes you can use the "submit by email button" that's what it's for.
    Second, once the form is complete one seemingly complicated step to fix the "attach as pdf instead of xml" if your form keeps attaching as "xml" if it already attaches as "pdf" then skip the rest of the "second step"
         go to the top and click the "view" menu, then select "xml source"
         then go back to top and click the "edit" menu then select "find"
         type "xml" without the quotations and keep clicking "find next" until you see the "submit" line (eg. <submit format="xml")
         change the "xml" to "pdf"then go back to the "design view column" if you get a "parts of this or that cannot be whatever" message just click ok or ignore
    Third, assumming you used the "submit by email" button like you should be the find that button and click the center somewhere, too the right a "field" box comes up
         enter your own email address, you can enter an stock email subject to or leave it blank
         also, a bit further down it says "presence" then "visible" I like to change "visible" to "visible (screen only)" this way it does not show on the printed version. That is one of the things i like the most about this program, you can put text boxes, signature boxes, any kind of
              box and make it visible, visible only on print, only on screen, etc. you just have to play around. It's nice to put a large text box with instructions for how the person should fill out and what to do that helps them and doesn't show up on print.
    Ok, the above is a lot of words but if you print it out and follow step by step you'll see how easy it is and after a couple runs you won't have to look at your cheat sheet again.
    Fourth, So, it was easy to figure out how to make a form the frustrating part was sending it out to be filled in save, printed whatever then sent back to me (now you). the problem is, the form has to be distributed to be approved so to speak. If it is just for one person that is no big
         deal, just first click "file" "save as" give it a name it reverts into adobe pro and asks how you would like to distribute, follow the instructions you send it to whomever you like they fill it out and submit it back because your email address is linked to the "submit as
         email" button. But what if its just a form you want on the company share drive anyone can open fill out, save, send to you or send to someone else, that's where it's tricky.
    Fifth, Distributing to yourself so you can approve the form for world wide dissemination.
         Same procedure as above for the single recipient but instead of sending to someone else you send it back to yourself by entering your own email address again when it asks "how would you like to distribute your form--same as above"
         click "send now via email" enter your address they will return it to (but it's not they this time its really yourself)...follow the instructions, specifiy a generic folder that will collect data (you can delete later, you don't have to collect data unless you want)
         put in your email address as the recipient. change the stock email subject and message if you'd like, then click done, it will email you the form. close out the live cycle and adobe programs and go to your inbox (may take a min)
    Sixth, open your attachment.(no remember you submitted the form to yourself but think of yourself as someone else like a customer) when the form is open you can enter stock fields if you like or do nothing...click the submit by email button, follow the instructions and s
         send it back to yourself again (don't get confused...it's really you as the customer sending back to yourself as the owner of the form) if you are a criminal think of it as like "laundering money through a bank" you are laundering the form through your own email system
         close out the form and go to your inbox again an open the returned form. now when you open it there is something new. there is a box that says "this file is a completed form (even though you didn't enter any data---it's a laundered form now) and leave it on the
         "add to existing data set" which is the one you created earlier in the generic folder....click "ok", now the form changes once again, there is a new look to the top, don't worry about it just go to the top right of the form and click on "options" then "save file as" give it
         a name again and remember where you saved it to. then close adobe and say yes when it asks you if "you want to save changes to your data set"....say yes!!
    7th, forget the data set, no longer is important...find the form you saved and open it. go to the top and click the "advanced" button then "enable user rights in adobe reader" then click "save now" this is the final form so name it appropriately and place it where you want
         people to find it, they can now open, fill out, print, save as, email, whatever. The only downside is if they use the submit by email it automatically defaults to your email but when their email client opens they can delete your address and put someone else if they want.
    thats it...lots of words but it really is easy after you do it a couple of time. the final downside, if the final form works but you decide to change anything on it with LiveCycle, you have to go back through all the steps or it will tell whoever opens it in reader that the original
         has change and they cannot do anything with it, but it's ok, make your changes or improvement, by now you are an expert at laundering live cycle forms, take you 5 min, no worries!
    Happy Laundering!!
    Sean
    NOTE: this procedure only validated with LiveCycle 8.0

    Here is the window you will see when you choose Enable Usage rights.
    Note: That means that you can not edit any content once USAGE Rights are envoked.
    So you must make sure all corrections to documents made and perfect before Envoking rights.

  • How does one strip out all Live Cycle data from a PDF and rebuild the form fields in Acrobat?

    Someone in a different department built a bunch of forms in Live Cycle. We now need to make minor edits to these forms but we all have Macs and can't use Live Cycle. Currently our only option to change a date and a name on each form  is to buy a new Windows workstation, buy a copy of Live Cycle and train someone for it.
    I understand the Live Cycle technology and Acrobat technology for forms are somehow different but there must be a way to just strip out all the Live Cycle form programming so that I just have the bare PDF with the text and layout.  Then make the text edits and rebuild the form fields in Acrobat.

    It depends on your PDF. Is the PDF a static XFA or a dynamic XFA?
    You can check to see if the PDF is static/dynamic by clicking File=>Save As, and it should say static or dynamic PDF as file type.
    iText will work with Static XFA forms created in LiveCycle. Dynamic XFA forms are not supported.
    You can also submit XML data to a server side script and parse the XML data using C# system.xml.xmlreader.
    Another tool that may speed the development of the project is:
    http://www.fdftoolkit.net/
    Note: FDFToolkit.net utilizes iText Technologies.

  • Fdf format should work with pdf's made with Live Cycle Designer!!!

    using: Adobe Acrobat Professional 8.0; Windows XP.
    I have need to take data from a SQL database and display that data on various forms that were created by a city Agency, the DOB. Some of the forms were created using Adobe Acrobat version 6. For those forms I am able to create an .fdf file and open the associated pdf by using a run statement in my prorgramming language. This is very nice. The fdf format is easy to recreate, and the run statement opens the pdf with the data displayed automatically, WHICH IS MY DESIRED END RESULT!!! Users click a button in my program, they get a form with the data on it.
    Now the DOB has created new PDF forms that were made using Live Cycle Designer. Much to my suprise, documents create by the designer cannot handle the fdf data format, just xml. This is a real problem for someone trying automatically populate a pdf from data collected not using the form itself. The xml data format cannot automatically open the document and populate the form data the way the fdf does. I spoke with tech support and they had no answer for me but to recreate the forms. That will take me days.
    It is hard for me to understand why you would create a tool such as Live Cycle Designer that prevents a user such as I from using all of the features of your Adobe Acrobat Professional 8.0 product. Very suprising.

    You might ask about this in the regular forum. There are several form experts there that may be able to help you.

Maybe you are looking for