LMS 2.5 RME Table Of Content

Hi We have installed LMS 2.5.
We are not able to view TOC(Table of Contents of RME(4.0.3). Please suggest
Vaishali

Hi,
Are you referring to 'dbreader'? This is not recommended as you can potentially break CiscoWorks.
If you forgot the database password here is the way that you can change it.
Windows:
net stop crmdmgtd
..\CSCOpx\bin\perl dbpasswd.pl dsn=rme encryption=yes npwd=
net start crmdmgtd
Solaris:
#/etc/init.d/dmgtd stop
opt/CSCOpx/bin/dbpasswd.pl dsn=rme encryption=yes npwd=
#/etc/init.d/dmgtd start
Thanks.

Similar Messages

LMS 2.5 RME TOC

Hi We have installed LMS 2.5.
We are not able to view TOC(Table of Contents of RME(4.0.3). Please suggest
Vaishali

Hi,
Are you referring to 'dbreader'? This is not recommended as you can potentially break CiscoWorks.
If you forgot the database password here is the way that you can change it.
Windows:
net stop crmdmgtd
..\CSCOpx\bin\perl dbpasswd.pl dsn=rme encryption=yes npwd=
net start crmdmgtd
Solaris:
#/etc/init.d/dmgtd stop
opt/CSCOpx/bin/dbpasswd.pl dsn=rme encryption=yes npwd=
#/etc/init.d/dmgtd start
Thanks.

Table of Contents & Completed Sections

Hi all, just generally looking for some advice here.
I am developing some e-learning. For now, let's assume there is no quizzing element in the e-learning. It's just a linear bit of e-learning, the user needs to read the information on each slide, click Next, go to the next slide, etc, and so on. Let's assume the e-learning module essentially contains four sections (let's call them Introduction, Learn, Try and Conclusion). FYI, the e-learning will be hosted in the Cornerstone OnDemand LMS.
I want users to have some visual indicator which shows that they have completed each section. I realise I could use the Table of Contents to show this to some degree, and that's explored in Method 2, but I'd like your advice on Method 1:
Method 1: I'd like the e-learning to launch on a Home slide I would create, which contains links to the four sections: Introduction, Learn, Try and Conclusion. As the user completes each section, they are prompted to return to the Home slide. Each time they complete a section and return to the Home slide, I would like a green tick to appear next to each completed section to indicate that they have completed that section. It's important that the user is able to log out of the e-learning and return and the sections they have already completed still show as completed (indicated by the green tick). I assume I'd need to use some sort of advanced actions. Is this even possible within Captivate?
Method 2: I realise I could use the Table of Contents, and that might well be simpler. However, I'd prefer the method described in Method 1, because I have much greater control over the content. However, if I have to use the ToC, I'd like to know the best way to show the section completion status. I know that I have to group the slides into a folder in the ToC, so for example I might group slides 2-10 in the Introduction folder, slides 11-20 in the Learn folder, slides 21-30 in the Try folder and slides 31-40 in the Conclusion folder, however each once each section is completed by the user (normally indicated in the ToC by a green tick), this isn't shown as complete in the ToC. The reason for this, is that I want the user to see the section in the ToC, but not the individual slides, and it appears a section is only shown as completed in the ToC if I show one or more slidesin that section. Is there any way around this limitation?
I'd much prefer to explore Method 1, but Method 2 is certainly viable if I can overcome the limitation described above.
I'm developing in both Captivate 4 and Captivate 5 - I prefer Cp4, but happy to revert to Cp5 if that's where the solution lies. Thanks all for any and all advice given!

Hello,
Perhaps my blog post can help you? I offer a free template as well (it is for CP5), provided you send me an email address (can be done by private message):
Template for reusing script
Lilybiri

Table of Contents navigation question in Captivate 5.5

Hi - I'm a fairly new user of Captivate (5.5.), and hope that someone can answer this question. I'm trying to set up a table of contents with navigation that will not let users go to slides that they have not yet viewed, but still enable users who have left and re-entered a course go back to any previous slide that they've viewed. Here are some details:
* I'm publishing the course using the SCORM 2004 setting, and testing it in SCORM Cloud and our LMS (Cornerstone)
* The table of contents navigation is set only to "Navigate visited slides only."
* After reading as many of the related posts as I could find on this forum, I've been able to get bookmarking to work - that is, the course will take the user back to where he or she left off. And by using the InfoSemantics TicTOC widget, when a user returns to the course, all previously viewed slides are checked off in the table of contents.
* However, whatever I've tried, a user who leaves and goes back into a course can only navigate back to the first slide, not to any of the other slides he or she already viewed. I'd like for our users to be able to go back to any previous slide they viewed (for example, to review the section just before the one where they left off, or to review any part of the course for reference after completing it).
Is there a combination of settings, or a widget somewhere, that will let you both limit forward navigation to visited slides only, while still allowing users to go back to any previously viewed slide after exiting and re-entering a course? And this would need to work in an LMS.
Thanks for any advice you can give!

I did have the self-paced learning option checked, so I unchecked it. I did not have "user must past quiz" as required (it's set as optional). I tried adding an interactive button to the first slide and giving it a score. But after re-publishing, I still can only go back to the first slide (not any previously viewed slide) if I stop and re-enter the course. Here are the settings:
Quiz Reporting:
Manifest:
LMS Customization:
Quiz Settings:
Quiz Pass/Fail:
Settings for the interactive object on the first slide:
Settings for the "quiz" on the last slide:
Thanks so much for helping me with this.

Navigating Table of Contents with Module Reviews and Knowledge Checks

I have been using 5.5 for at least 3 months without issue.
My current course is being published SCORM 1.2 to SumTotal LMS, but that is not relevant at this time.
I have 3 modules in the course (3 module reviews and sets of knowledge check questions).
Each set of knowledge check questions are 3 random questions from respective quiz pools.
The final quiz is the only one with weighted values that report to the LMS.
Problem...
When you click past the Module Review (use Module Review 2) and take the knowledge check questions, and then click that Module Review 2 page via the Table of Contents, the Next and Back buttons do not work and everything freezes.
This even happens when in preview mode in Captivate, and I don't even have to post to LMS.
Help, please!

I have a specific style set up (similary to body text) to dress the table of contents at 11pt. Overset text was my thought too! but its actually just an empty paragraph with a title. I've attached an image to help explain.

How to remove the bookmark from the table of contents?

Hi everyone, I have a question:
How to remove the bookmark from the table of contents in Captivate 6?
Regards...

Doug, your frustration is making you "bug" gun trigger happy. LOL
LOL, I suppose I have.
I believe the answer you are looking for is in the publishing preferences: under LMS advanced settings, look for the option: never send resume data.
[can someone please confirm this - I am not at a desktop now]
Anyhow, selecting this option will stop resume data - so the lesson will treat even returning learners as new. Hopefully, this will work for you.
This works! Thank you again!
*but* Why isn't Captivate asking the learner to make the choice of whether to start over or resume. It does this correctly if the lesson is published stand-alone.
Thanks again!

Table of Contents & Navigation

Hi, I note the Table of Contents allows navigation and navigation to completed slides only. Until my users have passed the assessment at the end of the course I want them to navigate only to those slides which they have read. The options in the TOC allow me to do this. Once having completed the course, closed it then reopened it for a review, I want them to be able to navigate to any slide. Using the default settings above this does not seem to work on the LMS, students can only navigate forward if they have once again visited a slide first, though the status flag remains checked. Is this possible? If so I would very much appreciate some tips. I am not a programmer so anything simple would be ideal.
I am using Windows 7, Captivate 6, 32GB RAM, Thanks in advance.
Lecutas

Hello,
You could try using the system variable cpLockTOC. Allow navigation, but set this variable to 1 for the slide where you want to lock the navigation. Reset to 0 (default) for the other slides. You can use the standard action Assign when entering the slide.
Lilybiri

Acrobat Pro 9.0 freezes when viewing/scrolling through the table of contents of a document

I am hoping someone can help me or has experienced the same problem I'm about to describe. I belong to the technical publications group of a fairly large company and I review a lot of PDF documents. I just installed Acrobat 9.0.0 (via CS4 Design Standard) and I've noticed on larger documents where there's a full page or several pages worth of Table of Contents, Acrobat 9.0.0 seems to freeze up when I begin scrolling through the TOC. For example, if I want to use the Text Edit tools or use a sticky note, when I press on an icon, Acrobat will freeze for a good 10 seconds, then will allow you to press the icon. It tends to freeze each time I want to make my next edit or even pressing the up/down arrow buttons to go to the next page. Once I get through the TOC pages, Acrobat seems to function normally--no freezes.
Has anyone experienced this? Would appreciate any kind of advice on how to fix--perhaps there's a patch or update?
I didn't experience any of this using Acrobat 8.0--I never had any real problems with Acrobat until 9.0.0.

Your issue may not be related to a difference between v8 and 9.
I have not had this problem on my computers, but a coworker had this issue. For many documents that others were able to open and scroll through without issue, his computer was freezing and unfreezing. IT determined his graphics capabilities were not able to keep up with the requirements of working with larger documents and gave his computer a RAM upgrade and a new graphics card. Particularly during scrolling, higher demands are made on the computer to graphically render and re-render page content. Documents giving him problems before became a non-issue.
A new graphics card is obviously a $$$ solution, but you might want to check to see if your RAM meets the minimum requirements and check to see if there are any program updates (Help > Check for Updates).
I have had an issue of pdfs freezing, but not specifically in the table of contents areas. If your document has pages with images that have an unusually high number of layers, it may affect the ability to work effectively in the document.

Acrobat XI PRO: Create a Table of Contents (TOC) automatically in top, after I have combined several pdf.files into a single pdf.file

Hey
I have now tried for hours, but now I give up!
MY WISH -
Create a Table of Contents (TOC) automatically after I have combined several pdf.files into a single pdf.file.
I have already bookmarks, shown on the screen (see screenshot below) but I want those bookmark to be visualised in a separate TOC in the top of the combined files.
This new TOC (which I have inserted) shall be printable and serve as a cover page in a binder.
I have seen other cheap pdf.programs in the market (e.g. PDF Converter Professional 7.3) which are able to make the above things, easy, fast and nice.
Regards
Ole Bünger, Kristianstad Sweden

Somewhat roundabout way but this should work:
Is there easy way to print bookmarks Acrobat Pro 9.5

Table of Contents vanishes when trying to update or regenerate in CS6

I'm working with InDesign CS6 on Windows 7 Pro 64-bit
This is an old, legacy document. Today, I needed to remove two pages, so of course, I need to update my table of contents and index. I had no problems with the index - it regenerated just fine. The TOC is another matter. I clicked Layout > Update Table of Contents. I got the message stating that the contents was updated. However, what actually happened was the TOC text vanished! And, it actually is gone because I can see two empty paragraph markers where the TOC used to be. I've tried regenerating it instead of doing the update. Same result - it's gone.
I'm still fairly new to InDesign, so I'm not sure what I can do to troubleshoot this. Any suggestions would be appreciated.

Sounds like ID doesn't think there are any paragraphs with the style names you've selected for inclusion.
But I'm not a fan of direct conversion of legacy files because these sorts of things, or worse, happen a lot. Try this: Remove minor corruption by exporting

Problem with Sections and Table of Contents

I have just purchased pages. Both my iMac and MacBook have Lion. I do not have the "sections" button on the toolbar. When I open the "inspector" and try to insert a Table of Contents, the "paragraph styles" pane is empty. How can I correct these problems as I would like to use pages for a family story

You have started your document with a Page Layout template. TOC doesn't work with text boxes. You need to use a Word Processing document and have the text in the main text layer.
In the New from Template Chooser you can see the types in the left side bar.

How to create the Table of Content (TOC) in WEB

Dear Sir
Please help me
How to create the Table of content (TOC) in Web Intelligence Report,
Thanks
Gnanasekarn.K
Edited by: Gnanasekaran Kandasamy on Nov 20, 2008 11:12 AM

Hi Gnanasekarn,
You can create TOC in webi using Open Document, You can create link on the TOC and you can connect that link to open new report .
With the help of open document you can open the specific portion of report.
So you can achive your requirement using URL reporting or Open Document.
Regards,
Chaitanya Deshpande

Creating a Table of Content (toc)

Hi
I am very new with Output designer, so please dont mind if it is a silly question.
I have to create a PDF report which has around 15-20 sections. I need a toc (table of content) at first page and at the specified position with page number for each section.
All the sections has some header and detail subforms, so pagenumber is not known at the begining for each sections. I am using xml file as the data file.
So can i use JFPREAMBLE to get the page number for different subforms, and write that on to the toc subform,
i did lot of mind storming but not able to resolve my problem, please help.
thanks and regards
nitin

Hello,
I was able to create a TOC for a recent customer in the UK.
Took a lot of work, but it worked.
You will have to create a TDF to get the data that you require to be on the TOC, but this is quite easy. The best way is to get the TDF to output the result as a seperate file, and then get the orginal data to call the file as the first thing that you do by using the ^file command
If you would like an example please drop me a line at [email protected]
Regards

Is Acrobat Pro right for us. We have an Employee Handbook that needs editing. Some is current pdf, some from an older version. Want to get all into one handbook, have the table of contents automatically adjust and link to specific pages from the ToC.

Is Acrobat Pro right for us. We have an Employee Handbook that needs editing. Some is current pdf, some from an older version. Want to get all into one handbook, have the table of contents automatically adjust and link to specific pages from the ToC.

You can download the trial version (http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html) to convert the PDF back to WORD if you do not have the original. The conversion may not be perfect, but it is typically better than starting from scratch. You may be lucky and get a good result. You might check the settings (in the save screen) to try retain format versus retain text flow. The format version can be a pain to edit since it creates a bunch of text boxes. The flow version may require you to reformat in WORD, but you likely would want to do that anyway.

Report Generation Toolkit: Table of Contents in MS Word

Hello forum users,
I would like to add a table of contents to a MS Word document, using the Report Generation Toolkit.
I couldn't find a VI in the toolkit that does that, so I tried to modify the VI "Word Insert Field.vi". Doing so, I could access a property node of the class "Word._Document" and an invoke node of the class "Word.TablesOfContents" with the method "Add".
As this modified VI does not belong to the private LabVIEW class "NI_Word.lvclass", it is not possible to unbundle the (type cast) "report in" wire to get the "Word._Document" class reference. I can't add the modified VI to the NI_Word class either, because it is password protected.
There are so many methods and properties that are not used in the official Report Generation Toolkit, like this one. How can I access them?
Or maybe there is another way to add a table of contents to a MS Word document (programmatically). Maybe I have to use a template. I rather wouldn't, though.
Operating System: Windows 7 64bit
LabVIEW: 2009 [9.0 (32bit)]
Report Generation Toolkit: 2009
MS Office: 2003 SP1
Thank you for reading an answering.
Solved!
Go to Solution.
Attachments:
Word_Insert_TOC.png ‏68 KB

Hello again,
in the "Word Specific" > "Word Advanced" Palette of the Report Generation Toolkit, there is a VI called "Word Get ActiveX References" which essentially unbundles the private "report" data stream / wire. Thus, I can use the property and invoke nodes that make use of the "Add TablesOfContents" method.
I hope, that helps other users as I didn't find too many topics on Report Generation. Maybe it's just too easy...
Attachments:
Word_Insert_TOC_fix.png ‏60 KB

LMS 2.5 RME Table Of Content

Similar Messages

Maybe you are looking for