LMS data restore failed

Dear,
I am doing the migration for LMS 2.6 from to a new server, after system installation, I tried to do the data backup and restore.
I did the data resotre by command:
D:\CSCOpx\bin\perl D:\CSCOpx\bin\restorebackup.pl -d E:\BackupFromPekw015a\CSCODBBACKUP -gen 163 -t E:\BackupTempFile
Where D:\CSCOpx is the installation path of the LMS 2.6.
But the restore failed with log as below, is there anyone could help to check what the problem is?
Thanks in advanced.
[Mon Jan 24 14:16:21 2011]
[Mon Jan 24 14:16:21 2011]
[Mon Jan 24 14:16:21 2011] <Restore started at 2011/01/24 14:16:21>
[Mon Jan 24 14:16:21 2011]    <Initializing starts>
[Mon Jan 24 14:16:21 2011]       The OS is WINDOWS
[Mon Jan 24 14:16:21 2011]       Finding the OS of the backup archive
[Mon Jan 24 14:16:21 2011]          Presence of : in E:\BackupFromPekw015a\CSCODBBACKUP\163\cmf\userinfo\datafiles.txt confirms the archive is windows
[Mon Jan 24 14:16:21 2011]       Finding the OS of the backup archive, completed.
[Mon Jan 24 14:16:21 2011]            OS of the backup archive is..................... : Windows
[Mon Jan 24 14:16:21 2011]       <Checking the presence of TEMP/tempBackupData>
[Mon Jan 24 14:16:21 2011]          Creating E:\BackupTempFile\tempBackupData
[Mon Jan 24 14:16:21 2011]          [ mkdir E:\BackupTempFile\tempBackupData ]
[Mon Jan 24 14:16:21 2011]       <Checking the presence of TEMP/tempBackupData, completed.
[Mon Jan 24 14:16:21 2011]       Finding CMF version from the backup archive
[Mon Jan 24 14:16:21 2011]       INFO: The patch version of D:\CSCOpx\setup\cmf.info is [6]
[Mon Jan 24 14:16:21 2011]       INFO: The patch version of E:\BackupFromPekw015a\CSCODBBACKUP\163\cmf\cmfversion.info is [6]
[Mon Jan 24 14:16:21 2011]       The presence of E:\BackupFromPekw015a\CSCODBBACKUP\163\cmf\cmfversion.info confirms its CDONE3.0 data
[Mon Jan 24 14:16:21 2011]       <Finding the applications installed in the machine>
[Mon Jan 24 14:16:21 2011]       <Finding the applications installed in the machine, completed.>
[Mon Jan 24 14:16:21 2011]       <Finding applications in backup archive>.
[Mon Jan 24 14:16:21 2011]       <Finding applications in backup archive, completed>.
[Mon Jan 24 14:16:21 2011]       <Finding NMSROOT of archive>
[Mon Jan 24 14:16:21 2011]          [ D:\CSCOpx\bin\tar tf E:\BackupFromPekw015a\CSCODBBACKUP\163\cmf\filebackup.tar --force-local >E:\BackupTempFile\tempBackupData\filebackup.list ]
[Mon Jan 24 14:16:21 2011]          ERROR: lib\classpath\com\cisco\nm\cmf\servlet\cwpass NOT present. Cannot find NMSROOT in archive
[Mon Jan 24 14:16:21 2011]          <Deleting directory E:\BackupTempFile\tempBackupData>
[Mon Jan 24 14:16:21 2011]             [ rd /s /q E:\BackupTempFile\tempBackupData ]
E:\BackupTempFile\tempBackupData\filebackup.list - The process cannot access the file because it is being used by another process.
[Mon Jan 24 14:16:21 2011]             ERROR: Unable to delete directory E:\BackupTempFile\tempBackupData in deleteDirectory()
[Mon Jan 24 14:16:21 2011]             WARNING: Unable to delete the temp directory E:\BackupTempFile\tempBackupData.
[Mon Jan 24 14:16:21 2011]          <Restore stoped at 2011/01/24 14:16:21>

Dear Nick,
Thanks for your reply, I have tried to do a new backup and restored it, but still the same.
Then I checked the backup file, found only three folder: campus, cmf, rmeng. No folder for Comman Service
I think that may be why system couldn't find the file: lib\classpath\com\cisco\nm\cmf\servlet\cwpass
Is there's the problem? Why there's no backup file for Comman Service?
Long Fei

Similar Messages

R2 XP to Windows 7 Migrations - User State Data Restore Fails

The client I am at is trying to migrate about 800 XP clients to Windows 7 before the April deadline. They have ConfigMgr R2 and are aware of the limitations with ADK 8.1 for Windows XP. We are following the following ConfigMgr Blog:
https://blogs.technet.com/b/configmgrteam/archive/2013/09/12/how-to-migrate-user-data-from-win-xp-to-win-8-1-with-system-center-2012-r2-configmgr.aspx
We have created the separate TS to capture the User state on the XP box. That works find. We have created the TS to deploy Windows 7 and also restore the users state. That is where the issues are. The image deploys fine however the
User data is never restored.   When we do a 7 to 7 Migration everything works great.
Below is an example of the loadstatescan.log file from another client but it is exactly what we are seeing here as well:
2009-11-26 14:00:35, Error
[0x000000] The account XXXXXXX\admin is chosen for migration, but the target does not have account XXXXXX\admin. See documentation on /lac, /lae, /ui, /ue and /uel options.
2009-11-26 14:00:35, Info                  [0x000000] Failed.[gle=0x00000006]
2009-11-26 14:00:35, Info                  [0x000000]   Unable to create a
local account because /lac was not specified[gle=0x00000006]
On both TS we have uncheck the box that say to copy and restore local accounts. However, as you can see in the error above the loadstate is trying to restore the local Admin account. Is there a work around? I have seen other post about
this but no one has either updated them with their fix or there hasn't been a fix?
Kristopher Turner | Not the brightest bulb but by far not the dimmest bulb.

So I am not sure if this is the "technical fix" for my problem. Something I don't think should fix it but at least it fixes it for now. On the task that runs the capture user data the default settings is to capture all user data unless you specify other
custom settings. We have been using gather all data. However, in the restore user data step there is actually a check box to allow local accounts to be restored. Once we check that box our XP to Windows migrations run without an issue.
First, why isn't there a check in the user capture to disable local accounts if there is a check box for it in the restore user data? Anyway, that is our fix for now. It is working but still a little confused.
Kristopher Turner | Not the brightest bulb but by far not the dimmest bulb.

Migration LMS 3.1 - 3.2, restore failed

Hello,
I'm trying to migrate from LMS 3.1 to 3.2, via backup/restore. When doing restore of LMS 3.1 backup on clean install of LMS 3.2 I got following error -
(copy/paste) from restorebackup.log:
[Mon Apr 11 13:39:48 2011] Copied directory....
[Mon Apr 11 13:39:48 2011]              From : [D:\CSCOpx\tempBackupData\dfm\CSCOpx\objects\dps\config]
[Mon Apr 11 13:39:48 2011]              To    : [D:\CSCOpx\objects\dps\config]
[Mon Apr 11 13:39:48 2011] INFO:    The folder D:\CSCOpx\tempBackupData\dfm\CSCOpx\objects\vhm\config\inventorycollector
[Mon Apr 11 13:39:48 2011]          Does not exist in archive, hence ignoring
[Mon Apr 11 13:39:48 2011] Successfully restored DFM data files.
[Mon Apr 11 13:39:48 2011] [ xcopy D:\CSCOpx\tempBackupData\dfm\CSCOpx\objects\smarts\conf\trapd D:\CSCOpx\objects\smarts\conf\trapd /E /O /Y /I ]
D:\CSCOpx\tempBackupData\dfm\CSCOpx\objects\smarts\conf\trapd\trapd.conf
D:\CSCOpx\tempBackupData\dfm\CSCOpx\objects\smarts\conf\trapd\trapd1.conf
2 File(s) copied
[Mon Apr 11 13:39:49 2011] Copied directory....
[Mon Apr 11 13:39:49 2011]              From : [D:\CSCOpx\tempBackupData\dfm\CSCOpx\objects\smarts\conf\trapd]
[Mon Apr 11 13:39:49 2011]              To    : [D:\CSCOpx\objects\smarts\conf\trapd]
[Mon Apr 11 13:39:49 2011] Successfully restored Trap data files on windows.
[Mon Apr 11 13:39:49 2011] Appending additional Trap Forwarding entry for Scaling support
"File Trapd.conf Exists"
Searching file "Trapd.conf" for the string "FORWARD: *.*.*.* .* * * localhost:9020" ...
FORWARD: *.*.*.* .* * * localhost:9020
The string "FORWARD: *.*.*.* .* * * localhost:9020" was found in file "Trapd.conf"
[Mon Apr 11 13:39:49 2011] Successfully appended additional Trap forwarding entry on windows
[Mon Apr 11 13:39:49 2011] doing data restore from dfm bkup version 3.1.3 to current version 3.2.0
[Mon Apr 11 13:39:49 2011] Restoring DFM DB...
root=D:\CSCOpx\databases\dfmFh\dfmFh.db
INFO: Current Database password does not match the password of Database being restored
INFO: Using the Password of the Database being restored
30% of DFM Restore completed
root=D:\CSCOpx\databases\dfmInv\dfmInv.db
INFO: Current Database password does not match the password of Database being restored
INFO: Using the Password of the Database being restored
[Mon Apr 11 13:40:13 2011]
Starting db engine for dfmInv
    Starting database engine dfmInvEng
INFO: Process created
INFO: Started the Database engine : dfmInvEng Retry 0
INFO: Started the Database engine : dfmInvEng Retry 1
INFO: Started the Database engine : dfmInvEng Retry 2
INFO: Started the Database engine : dfmInvEng Retry 3
INFO: Started the Database engine : dfmInvEng Retry 4
INFO: Getting message
INFO: Connect the database dsn=dfmInv
ERROR: Failed to start the database engine with old password: Database engine 'dfmInvEng' could not be started on database 'dfmInvDb' in Bulk mode..
[Mon Apr 11 13:40:57 2011]
Get connection handle dfmInv
[Mon Apr 11 13:41:11 2011]
ERROR testdb.pl:Couldn't connect to the database dfmInv
Regards,
Mladen

Rahul,
I think you have issues with your LMS 3.1 server which has been advsied in some other threads to upgrade to atleast LMS 3.2.1 which is free upgrade for you.
Using a End of support product will have consequenses of lack of support mostly. Let us know the challenges you have in upgrade.
People here in CSC can help and suggest solutions.
-Thanks
Vinod

System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

Greetings
                                    - Our critical server image backup Fails on one
server -
Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
partition on each source hard drive is not included.
Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
Server A good.
Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
"The system image restore failed. (0x80042403)"
The destination drive is Not "Excluded".
Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
Tried the earliest dated B image rather than the most recent, fail.
The Server B backups show as "Success" each night.
Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
Restore still fails.         It looks like its to do with the image rather than with the hardware.
Tried unticking "automatically check and update disk error info", still fail.
Server A SRP 100MB C: 50.6GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Server B SRP 100MB C: 102GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Restore-to hard drive is also Seagate ST3500418AS.
http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
"If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring." Doesnt apply here.
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
Thank you so much.

Hello,
1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
correct order in the hardware.
4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline.
5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
should be present with minimum size requirement.
6. Some other requirements are discussed in following newsgroup threads:
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
Regards,
Vikas Ranjan [MSFT]
------- This information is provided as-is without any warranties, implicit or explicit.-------

Restore fails with Finder error

Been trying to restore my iPhoto Library (another can of worms) but the restore fails with the following error:
"The Finder cannot completer the operation because some data in "iPhoto Library" could not be read or written. (Error code -36).
I am trying to restore it after iPhoto "lost" all the images, even though I can see that everything is still there.
This is very frustrating to say the least.

Try doing a +*Repair Disk+* (not permissions) on your Time Machine drive via Disk Utility, in your Applications/Utilities folder.

IPhone 5 cellular data services failing

ISSUE/SYMPTOMS: iPhone 5 ONLY: Cellular Data stops intermittingly, cellular data locks up without warning, Wi-Fi data connection not working on occasion, iCloud contacts, calendar and reminders not updating, Find My Phone not working, mail or Internet not available or server time-outs. No error messages though. All of these are symptoms of no data service. Problems seem to be related to iPhone 5 failing to switch between LTE and 4G or 3G data services on AT&T.
My iPhone 5 32GB AT&T version (iOS 6.0.2) along with my clients and family using iPhone 5 in the state of Oklahoma are having this issue on their AT&T iPhone 5's: no cellular data connection re-established if at anytime the LTE connection is lost or weak. As with iPhone's prior to iPhone 5, the iPhone 5 is supposed to drop down to the next tier of data service and re-connect to cellular data service when the higher speed cellular data service is not available. Apparently this is not working well on the iPhone 5.
What led me to research this LTE issue was that my iPhone was not syncing on iCloud with contacts, calendars and reminders with my other iOS devices. Other times this issue became apparent was when iMessage quit sending and receiving until I would reboot my iPhone (sometimes it would finally send the message as a “text message”). When I had these problems I also found out I was not getting any cellular data service for Internet browsing, mail, Maps, Find My iPhone, etc. This would happen without notice. In other words I would not receive any notice or error message that data service had stopped other than the fact I was not receiving any mail, iMessages, or iCloud sync updates. My only resolution was to reset or reboot my iPhone several times a day, and that would resolve it about 70% of the time.
I have talked to Apple Support on 2-3 occasions in the last week and AT&T Support twice in the last 2 days. If it is really true, only the AT&T Technical Support Advisor informed me of a nationwide issue relating to iPhone 5 and LTE: iPhone 5's are not re-connecting to 4G or 3G cellular data service once the LTE data connection is lost or dropped... the voice calls continue to work, but cellular data service fails and stays locked up without an error message until the customer reboots the iPhone.
Obviously this is very unacceptable. We depend on these data services and at minimum need to know when it stops working instead of finding out from a phone call that someone sent us an important email or something.
The AT&T representative also said that both AT&T and Apple are aware of and are working on the issue as it is a nationwide problem with iPhone 5 and LTE. The Apple Support Advisors I talked to made no mention of this "known" issue. AT&T said that it is partly AT&T responsibility because the capacity of LTE is overloaded and cellular data connections are dropping because of the lack of coverage and/or capacity. They actually refunded my data service for a whole month in apology for the inconvenience (I did not even ask for that--I just want my data service to work). But they also said that Apple has responsibility in this issue because the iPhone 5 should drop down and re-connect to the next lower tier of data service when LTE is not available or lost; instead, it is locking up somehow or it still thinks it is connected to LTE when it is actually not. I don't know how accurate these statements are, but my problem is real.
TEMPORARY WORK-AROUND / FIX FROM AT&T: Disable LTE on the iPhone 5. Or when you figure out that data is not coming to your iPhone, use Airplane Mode ON/OFF for a few seconds to force re-connection to a tower without rebooting the iPhone. You can Disable LTE on the iPhone 5 in SETTINGS/GENERAL/CELLULAR. I have disabled LTE on my iPhone 5 and have not had any of these cellular data issues since.
Disabling LTE is not acceptable either, but it is working. At least I seem not be losing connection or locking up without knowing it. In my office over the course of a day, my iPhone 5 will jump back and forth on LTE and 4G sitting in the same place. Disabling LTE has stopped this and the problem, but the iPhone 5 should switch cellular data services seemlessly just like the phone switches towers on a phone voice call seemlessly (most of the time).
WI-FI ALSO STOPS WORKING SOMETIMES AFTER THIS LTE disconnect / lock-up issue: That has been my experience along with my clients and family as well. If you use Wi-Fi a lot on your iPhone it will hide this LTE issue until you leave your Wi-Fi and get on LTE and then drop LTE (silently) and then go back to your Wi-Fi. My experience has been I have to reboot the iPhone to even get Wi-Fi working again after that happens.
I do not know if some of these comments and analysis are really accurate or valid or not... all I know for sure is since I upgraded my iPhone to the 5 along with my other family members and clients, we have had "no data" on many occasions and are continually rebooting our iPhones and looking for what is wrong.
My questions to the support community are these:
     1. Is anyone else having this issue? Or is it just me and my few? Maybe a lot of people do not realize they are not getting their data because they are on Wi-Fi most of the time or they are just rebooting and not trying to identify the real problem. AT&T said it was nationwide iPhone 5/LTE issue. Anyone else heard that from either Apple or AT&T?
     2. Is this an iPhone 5 / Apple issue or is AT&T solely responsible? Or is it both? Where do we get a solution??? Is AT&T LTE holding false connections with iPhone 5 or is the iPhone 5 failing to recognize a dropped LTE cellular data connection and then failing to attempt to re-connect with 4G or 3G?
     3. Did I miss where this issue is posted? I searched Apple Support and Communities and did not get any hits. Any updates or further insight on the issue? Any other fixes other than Disabling LTE?
      4. If this is in fact a real issue belonging in part to the iPhone 5, we need to escalate Apple’s attention to it.
Thanks in advance for your help and feedback.

Thank you fellow users and experts for your feedback and updates. Sorry about the large font on the original post... accidental via cut and paste.
I have escalated the issue with both Apple and AT&T. I actually got senior level troubleshooters from both Apple and AT&T on the phone at the same time... rare moment. Here are the key points of the update:
     1. AT&T did NOT confirm the earlier statement by another AT&T Technical Support Agent that this was an emerging nationwide issue about iPhone 5 and LTE losing data connection and not reconnecting at a lower level or re-connecting to LTE once the signal came back. So that earlier statement was not accurate as suspected by all of us. The senior tech at AT&T said he has seen this issue sporadically over the last month or so, but only with about 3-4 customers. He said it seems to be location or phone dependent (some phones not all phones).
     2. The Apple Tech was satisfied that all that could be done to eliminate my issues possibly relating to my instance of software / iOS had been accomplished except erasing my iPhone and restoring as a new phone (I have avoided this inconvenience with the argument that other family/clients with the iPhone 5 have had the same problem).
     3. AT&T went so far as to examine which towers I had been connecting to over the last week and looked at other technical data that could possibly explain the issue. I now know I have 3 towers that provide LTE within 4 miles of my home/office, one within a half mile. But so far there is nothing to explain or even properly identify the issue. AT&T offered me to take my phone to an AT&T store, try to force replicate the problem there, if so, the store would put my SIM card in a brand new iPhone 5 (just to test) and try tor replicate the problem again. If replicated on a new phone, there is a deeper issue; if resolved on a new phone, the answer is obvious. I have not taken the time to do this yet.
     4. On Friday, Jan 4, 2013 while talking and between the tech support calls (on a different phone), I was able to re-create the problem 2 separate times in my home/office by forcing my iPhone to weaken its connection to service (burying it under electronic gear) and then waiting a few minutes, then trying to browse the Internet--no data service unless I manually reset the connection. I am only able to cause the issue to occur if there is at least 15 min of idle time after a weak signal condition AND only if I don’t completely lose a connection to cellular voice service. It seems that if you go down to NO SERVICE the phone will do new a search and keep searching until reconnects to LTE or other signals correctly, but a weak connection seems to be strong enough for voice service but can sometimes cause the LTE data service to stop without reconnecting to LTE, 4G or 3G unless I manually intervene. It also seems that idle time with a weak connection is also necessary to re-create the problem manually. Since Friday, I have not been able to re-create the problem. This has been an intermittent problem, so who knows.
FYI, I have never had this problem with my new iPad (also on AT&T LTE) that has been with me when the iPhone fails to have data service, but my iPad is never in my pocket or other places with perhaps less signal.
Again, if you are connected to Wi-Fi on your iPhone 5 most of the time, you may never notice this issue if you are even having it.
So far no progress on the real issue or resolution, but both Apple and AT&T have put forth very admirable effort.
If you or others you know are having this issue, please take the time to post a reply to this issue. Thank you.

Creation of the export data source failed

trying to activate ods but getting this message that the creation of the export data source failed.
and it also gives message that RFC Connection to source system is damaged===> no metadata upload
Please can someone help me with this.
Thanks in advance.
Michelle

Hi,
Check ur source system connection. by going to RSA1-> Source System-> right click and then select check.
U will get the info about the source system Connection. IF RFC has failed then better be in touch with ur basis.
Or try restoring ur source system connection by
Source system-> Restore.
Its sets all the default conenctions b/n ur systems.
Once again check the connection now. if it says ok.. then try do the export data source and then assign the data source to info source and then maintain the Update rules..
Hope this helps-
Regards-
MM

Updated to OS5, restoration failed with error -50.

I updated the phone to OS5. Restoration failed with an error -50.
I lost all my contacts, email setup, photos and other configuration.
How do I get back my contacts?

same thing happenned to me.
IOS5 installed fine, but the restore failed.
Eventually, I just logged in as if it was a new phone. iTunes remembered my apps, but all the data is still gone.
And then it backed up on me.
I'm on a winxp box, and I had gone into C:\Documents and Settings\<username>\Application Data\Apple Computer
and I copied it to another location. So perhaps, if they get this fixed, I can recover the items from this old location.
but, to be honest, I have lost a whole day messing with this, and I am very annoyed.

HT201263 Hi my iphone 5 is on recovery mode and I connect it with the computer but it's failing to restore the device the message is showing iphone restore failed!!!!!

Hi my iphone 5 is on recovery mode and I connect it with the computer but it's failing to restore the device the message is showing iphone restore failed!!!!!

Hi Bobi1346,
Thank you for visiting Apple Support Communities and for including the error number you are getting.
There's an article for troubleshooting that error.
iOS: Restore errors 4005, 4013, and 4014
Try these steps to resolve the issue:
Install the latest version of iTunes.
Restart your computer.
Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
Learn more about updating OS X.
Learn more about updating Windows.
Restore using another USB cable.
Restore your device on another computer.
If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support.
Take care,
Nubz

Restore failed due to iTunes being corrupt

Attempting to restore from a 'successful' backup got a warning message the restore failed due to a iTunes being corrupt. Found the following log
2013-06-19 13:14:14.979 [8216:f38]: restore library built Dec 21 2012 at 16:17:03
2013-06-19 13:14:14.979 [8216:f38]: iTunes: iTunes 11.0.4.4
2013-06-19 13:14:15.041 [8216:f38]: iTunes: Current software version: 10B329
2013-06-19 13:14:15.042 [8216:f38]: iTunes: Software payload version: 10B329
2013-06-19 13:14:15.042 [8216:f38]: iTunes: Using iTunes state machine
2013-06-19 13:14:15.636 [8216:f38]: iTunes: Restore error -34
The SAD thing is not only is all my data gone but the phone is not usable it is stuck on a setup screen.
Please help – What has happened to Apple????????????????????

Well I found a article that may help you.
Error 34:
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
http://support.apple.com/kb/TS3694

My Ipod has been disconnected from the internet. All efforts to date have failed,including resetting my network settings and trying to log in again.

My Ipod has been disconnected from the internet. All efforts to date have failed,including resetting my network settings and trying to log in again.

Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Upgrading to ISE 1.3 error ISE Global data upgrade failed!

HI,
Has anyone come across this issue? when upgrading, it seems to start all well but then this happens:
- Data upgrade step 40/67, CertMgmtUpgradeService(1.3.0.616)... % Error: ISE Global data upgrade failed!
Rolling back the configuration database...
Starting application after rollback...
% Error: The node has been reverted back to its pre-upgrade state.
% Application install or upgrade cancelled.
I've also upgraded it to the latest patch and tried again but to no avail. This is an appliance (3415) that came shipped with 1.2. It's not been configured other than the initial cli wizard. I've upgraded a fair few appliances but I haven't seen this issue come up before. Any thoughts?
Thanks in advance for any info...

If this is a test setup then you can do fresh ISE install.back up existing config and restore it to 1.3. If its production then contact TAC

2.1.0.63: Teardown Table or Row Restore failed

Hello all,
I'm trying to explorer the new unit testing functionality of SQL Developer. Some of my basic testing as gone well, but now I'm hitting an error that I can't resolve.
My unit test has a Startup Process of "Table or Row Copy" that populates the target table (and using a WHERE clause) successfully. I've configured the Teardown Process with "Table or Row Restore".
When running the UT, I get the error "Teardown Table or Row Restore failed: ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06512: at line 22" on the Teardown node. I've tried tweaking the Teardown settings to no avail.
I'm not sure what to do to resolve this error. (My code doesn't even have 22 lines of code.)
Any thoughts on troubleshooting this?
Thanks,
John
Edited by: user8153814 on Jan 11, 2010 4:53 PM
Added SQL Developer version number to the subject

(with apologies to John for not noticing this much earlier,)
Can you provide:
1. Definition for the table (don't care about names if that's sensitive, but column data type specification and any constraints are important)
2. Options specified for startup
3. Options specified for teardown
Thanks,
Brian Jeffries
SQL Developer Team

IPhone Restore Failed

I recently had a problem with my iPhone, so I took it in to Apple and they replaced it with a new phone. I brought the phone home and tried to restore it to my last back up. About a minute into the restoring process, a message pops up on my iPhone that says "There was a problem during restore." Then it tells me to restart the phone and try to restore it again. Then I get a message on the computer saying the phone was disconnected during the restore process.
I've tried this process 4 or 5 times now and I keep getting the same message. Does anyone have any suggestions as to what I can do to restore my phone?
Also, I saw a video on youtube that said you could fix this problem by opening the hosts file in finder and deleting the gs.apple lines. The only problem is when I opened the hosts file there were no gs.apple lines.

Exactly the same problem for me - except mine is the same phone, not a new phone.
I had to wipe my iPhone clean and so later tried to restore it, opting to restore from previous backup. During the restore of previous backup data I get the message on my iPhone "Restore Failed. There was a problem during restore. Please restart your iPhone and try restoring again."
No matter how many times I perform the restore, I get the same message. There is NO error number, and there is NO error in iTunes - only on the iPhone screen. I too have no gs.apple.com entries in the hosts file on my Mac.
I have restored the iPhone backup file itself from several different points in time from my TimeMachine backups, but all of them produce the same result.
C.

Leopard : Restore failed during network install

Hi,
I have created universal NBI using SIU on Leopard OSX server(10.5.1) of Leopard OS (10.5, 10.5.1) DMG.
While doing network installation, it reboots the machine and start installation but sometimes I get restore failed error and it stops installation. This happens 90% when I do net-installation from Leopard. And happens 10% when I do net-installation from Tiger.
I don't understand what could be the reason between Leopard and Tiger here because if there something wrong with NBI, net-install should fail for both the cases. (I assume, since I don't know that much about OS internals)
By seeing installer log, I can see "startup disk" application is crashing and it's parent process is Installer.
I will appreciate for any solution or any information if it is Leopard OS bug.
Thanks,
Rohit

Hello
I am trying to reimage one of my disk from other disk and using the following command.
echo "Password" | sudo -S asr -source /Volumes/Data/Images/TW_EN.dmg -target '/Volumes/OS X 10.5' -erase
But it is failing to restore OS without throwing any errors. I have two tiger and two leopard. There is no issue with same command on Tiger but Leopard is failing. Is there some issue with asr on Leopard.
Thanks,
Tagr

LMS data restore failed

Similar Messages

Maybe you are looking for