LMS prime 4.2.5 IPV6 support

I'm attempting to configure LMS 4.2.5 to perform IPV6 addressing for  polling and device management I need advice on how to proceed as I see very little documentation and I'm not seeing any options in the configuration web  GUI

I've not had a chance to exercise the features, but there's a table in Chapter 1 of the LMS 4.2 Admin Guide in the section "IPv6 Support In LMS" that outlines exactly where you can use IPv6 device addresses across the various LMS functions.

Similar Messages

  • Cisco Prime LMS 4.x IPv6 support

    Is there a document that describles the IpV6 support for LMS?

    It's not documented in any one place that I have found.
    Joe Clarke covered it in a post a post early last year. See here.
    Per the release notes, I don't believe LMS 4.1 has changed that significantly.

  • Cisco LMS Ipv6 Support

    Hi,
    Does cisco LMS v3.2 Support IPV6 in all modules ?
    We will be migrating from V4 to V6 in some time from now
    Thanks

    It has limitied ipv6 support.
    Details are outlined here:
    http://www.cisco.com/en/US/customer/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/overview.html#wp1090361

  • WS-X6848-SFP module are supported with LMS Prime 4.1 and 4.2

    Hi,
    I would like to know if WS-X6848-SFP modules are supported with LMS Prime 4.1 and 4.2.
    Thanks for your help,
    SILVIA

    It looks like they just added the WS-X6848-TX variant with the latest C6000IOS CiscoView package update (Version 37, dated 31 July 2012 - readme)
    I'd expect the -SFP variant should be in the next update.
    You should open a TAC case to make sure that it's brought to the attention of the dev team if they aren't already working on it. One of the tenets of Cisco Prime LMS is "Day 1 support" of new devices.

  • LMS Prime 4.2 Soft Appliance on UCS

    Hi,
    I'm trying to install LMS Prime 4.2 Soft Appliance on UCS C220 M3 with RAID controller . I have configured RAID 1 and using
    Cisco_Prime_LAN_Management_Solution_4_2.iso, but when i boot from KVM DVD I received this error:
    Do you have any ideas how to process from here?
    Thanks in advance
    Regards

    Sorry, NCS server (PRIME-NCS-APL-K9) was the option I was referring to. I didn't realize they specified the same image for UCS servers.
    I do note that the prerequisites specify (here) "LMS 4.2 is supported on the UCS B-series blade servers (B200-M1 or M2 and B250-M1 or M2) and C-series rack mount servers (C200-M1 or M2, C210-M1 or M2, C250-M1 or M2, and UCS C460)". It could be that the ISO does not have the necessary drivers for your RAID controller in the M3.

  • IPv6 support in JDMK 4.2

    Hi,
    We are working on enhancing our product to support IPv6. Currently we are using JDMK 4.2 with JDK 1.5. Wanted to know if there is any information about JDMK 4.2 support for IPv6?
    1) Does it support binding using IPv6 interface
    2) Can it accept SNMP request over IPv6 and send traps over IPv6 interface?
    Or should we migrate our application to newer version of JDMK?
    Regards
    -murali

    There is IPv6 support in the ASA version 8.2.
    We just posted an IPv6 Quick Start guide at https://supportforums.cisco.com/docs/DOC-15973 and would appreciate feedback on it.
    The Public Servers features is a NAT/PAT feature.  The good news is that the immense address space of IPv6 eliminates the need for NAT, you can just use use access lists to set up your policy.

  • LMS PRIME 4.2 integrating with ACS 4.2

    Hello,
    i would like to integrate new lms prime 4.2 with acs.4.2 . .. !!
    is there document or user guide for this version of lms?
    Thanks in advance.
    Marwan

    IN LMS 4.2 there is nothing which is known as Integration (like LMS 3.x), since it added feature RBAC.
    Now ACS can just be used as PAM to have ciscoworks authenticated for Tacacs+ or Radius. After the auth is done, you should have a authorization set in LMS locally for user, else it will be given a default HELP DESK access.
    For more details check :
    Authentication Using Login Modules - Overview
    -Thanks

  • IPv6 support in IOS

    hi,
    we have a Cisco 2851 router and bought the following IOS::
    System image file is "flash:c2800nm-spservicesk9-mz.124-25d.bin"
    Cisco IOS Software, 2800 Software (C2800NM-SPSERVICESK9-M), Version 12.4(25d), RELEASE SOFTWARE (fc1)
    I thought this version was supposed to have IPv6 support?
    TEST(config)#ipv6 unicast-routing
                                  ^
    % Invalid input detected at '^' marker.
    TEST(config)#
    which IOS should we buy?
    regards,
    Paal

    I think you need the IOS  advanced IP Services.
    Cheers,
    Eehab
    - Please rate the asnwers you find useful.

  • Question about Oracle10g Net Services'IPv6 Support

    I'm working in a network group which is studying the IPv6.Recently I installed oracle10g in the RedHat Linux-9(kernel-2.4.22,which supported the IPv4/IPv6 dual mode),but I can't configure the oracle10g in IPv6.
    I tried every method to find the solution,including read the oracle10g document,use the google,ask the support service,but there was no answer.And I can't login into the metlink to ask question because I didn't have the CSI number.
    So who can give me some advice about the configuration.Thank you very muck!

    I read the document before it was taken down a couple weeks ago. It said that IPv6 support would be introduced with Oracle11g and not back ported.
    Kind regards,
    Russ Cannon

  • What is the maximum number of ARP entries (IPv4) and ND entries (IPv6) supported in our controllers?

    Q: What is the maximum number of ARP entries (IPv4) and ND entries (IPv6) supported in Aruba controllers?
    A: The maximum number of static ARP entries supported is about 2048 for M3/72xx/70xx platforms.
    The maximum number of static ARP entries supported is about 128 for 6xx platforms.
    The maximum number of static ND entries supported is about 2048 for M3/72xx/70xx platforms.
    The maximum number of static ND entries supported is about 128 for 6xx platforms.

    a)It depends upon software level. b) 16,000 per card, With release 9.3:
    60K Connections Support on BXM-E—Provides the ability to support a maximum of 60K per card for VSI applications for the BPX 8600, for example, PNNI or MPLS, used on enhanced BXM-E cards.

  • E4200 IPV6 support (and the removal of it)

    Dear Linksys representatives,
    Could you please provide some detail on why IPv6 was available in the first builds of the router but then got removed in later firmware versions and the official lecture is that IPv6 is not being supported at all.
    I've had a nice little chat with one of your representatives and they could not clarify this at all. Actually, they say no Linksys devices EVER supported IPv6 period, which does not seem to be entirely true. Saw that 1.0.00 (build 13) for the e4200 actaully has IPv6 support in it and the current build has not.
    Could you also make a sticky post about IPv6 support on all Linksys devices with wether they will be supporting it in the future or not? Depending on the outcome to this question I'm deciding to return my Linksys device or not, since I actually need to have IPv6 support for development of new soft- and hardware.
    Kind regards,
    Michel
    ps: happy IPv6 day!
    http://www.worldipv6day.org/

    The E4200v1 and E4200v2 both support IPv6 in the latest firmware.  Do you still have a problem?  See also: http://home.cisco.com/ipv6 for a list of routers and the test suites that they have past.
    All future home routers are expected to have IPv6.

  • LMS Prime 4.1 unable to update dfm and other

    Hi all,
    I have a LMS PRIME 4.1 (virtual soft) and i try to update "software" but alerady fail with the similare message =>dfm 1.xx is required, but i not arrive to upgrade dfm....
    For information the device package are installed corrcetly.
    Best regards

    Thanks much.
    Indeed after I moved back the apps, they are now updating. I guess that's the trouble for being too anal.
    One more thing, after iPhoto is updated, it still gives me a message "A photo has been found in the iPhoto library that was not imported", but if I click "Yes", nothing was imported, and there is a Recovered Photo folder, but it was empty.
    Any suggestions on the fix?
    Thanks again.
    John

  • IPv6 support for sx300 series?

    Hi all,
    I'm wondering if we are going to be seeing some better IPv6 support on these switches? Maybe even some static IPv6 routing?
    Thanks.

    Apparently it's on the roadmap for 2012, so with a bit of luck we'll see it some time then:
    https://supportforums.cisco.com/thread/2113913
    Oh, whoops, it's already 2013! 
    Seriously though, an update on where this feature request got to would be appreciated - is there anyone at Cisco who can give us an update?.  Perhaps there's a version 8.0 of software for these phones about to be released with new support or something?  v7 has been out there a while now.

  • IPv6 support on ME 3400 Series?

    Hello,
    I'm looking into deploying a couple ME-3400G-12CS-A metro ethernet switches in our network. All the features listed on data sheet look great, however IPv6 support appears to be missing.
    Assuming the ME 3400 series does not support IPv6, will IPv6 support be available in the future through a mean of software upgrade for ME 3400's product roadmap? Or will enablement of IPv6 require complete replacement of ME3400 series products with something else (i.e. for example, Cat3550's hardware TCAM could not support IPv6, thus cat3560 is the right platform to upgrade into for v6 support).
    Thanks in advance for any suggestion that you can provide.

    ME 3400 does not support IPv6 currently in software. But there is no such limitation in ME 3400 hardware. So you can expect that IPv6 may be supported in near future.

  • IPv6 Support on RV042

    Hi,
    Any update is planified for add IPv6 support to Cisco Small Business RV042 Router ? My ISP, My modem and server software have IPv6 support but not the RV042

    Thanks for participating in the Small Business Support Community. Your feedback is important to us and we do pay attention. IPv6 will be supported on an upcoming RV042 hardware version 3. IPv6 support is not forthcoming for earlier hardware versions.
    Please keep the feedback coming. It's how we improve.
    Thanks,
    Stephanie Reaves
    Cisco Small Business Technology Group

Maybe you are looking for

  • Can't install or uninstall iTunes

    Background: A few weeks ago my computer locked up at the "Welcome" screen. Took it to a local place for service. They were able to say it was a Windows problem. They explained that there was a possiblity that computer would have to be reformatted, an

  • Problem in insertion

    i have used addBatch method for the insertion of multiple values at a one time.. but its not working... conn.setAutoCommit(false); PreparedStatement pstmt = conn.prepareStatement( ("INSERT INTO gl_mast VALUES (?, ?, ?, ?, ?, ?)")); for (int n = 0; n

  • XIProxy:INTERFACE_REGISTRATION_ERROR

    Hi Experts, I imported a SOAP->PI->RFC sync scenario from the old PI 7.0 server to the new PI 7.1 server. When I run the scenario for the first time in PI 7.1 I got the error XIProxy:INTERFACE_REGISTRATION_ERROR in the SOAP sender CC at RWB and "No i

  • How do i get the screen on my ipod 5th generation fixed

    My daughter dropped her iPod 5th generation and now the screen is shattered. How and where can I get this fixed?  I don't know if I have any kind of warranty. Please help

  • Photoshop is no longer displaying anything in workspace.

    I'm using a PC, I changed resolution of image in Photoshop CC 2014 from 72 to 300. It was working fine until I closed and reopened the program. Now, none of my project files are displaying any images in the workspace, this goes for old and new projec