Load failed due to Overflow converting from 853156+16

Hi All,
Load is getting failed from one DSO to another DSO with following error message. and its AP AR load
Runtime error while executing rule -> see long text
Message no. RSTRAN301
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
Overflow converting from '8.85315e+16'
The error was triggered at the following point in the program:
Z_BFOD_A_AR_LOOKUP_ITEM_E 278
System Response
Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level node of
the monitor:
Transformation ID
Data record number of the source record
Number and name of the rule which produced the error
Thanks,
Asim

Hey,
Ask the developer that wrote the end routine to check the code where the error occurs. First check if too much data is transferred and if it can be reduced. Then also check if the object needs to be extended 460652 - Extending key figures in BW.
Regards,
Michael

Similar Messages

Data Load Fails due to duplicate records from the PSA

Hi,
I have loaded the Master Data Twice in to the PSA. Then, I created the DTP to load the data from the PSA to the InfoProvider. The data load is failing with an error "duplicate key/records found".
Is there any setting that I can configure by which even though I have duplicate records in PSA, I can be successfully able to load only one set of data (without duplicates) in to the InfoProvider?
How can I set up the process chains to do so?
Your answer to the above two questions is appreciated.
Thanks,

Hi Sesh,
There are 2 places where the DTP checks for duplicates.
In the first, it checks previous error stacks. If the records you are loading are still contained in the error stack of a previous DTP run, it will throw the error at this stage. In this case you will first have to clean up the previous error stack.
The second stage will clean up duplicates across datapackeages, provided the option is set in your datasource. But you should note that this will not solve the problem if you have duplicates in the same datapackage. In that case you can do the filtering yourself in the start routine of your transformation.
Hope this helps,
Pieter

Failed to execute with the error Overflow converting from...

I have a query filter for UPC in Webi Report. The report is not working for one UPC (for other UPC's the report is working fine)...it gives error "failed to execute with the error Overflow converting from '6218090010'. (WIS 10901)". The same error is coming when I ran MDX in MDXTEST command in BW. When I take the UPC filter from the query filter the report runs fine and I see this UPC in the report. The data source is Bex and we have recently upgraded to SAP EHP 1 for SAP NetWeaver 7.0.
Regards
Sharma

Hi,
Under normal circumstances it should be enough to restart the connection service.
As far as we know there is no formal solution to this problem from SAP yet but restarting the connection service is much less of an interuption compared to restarting the the SIA.
Re-starting the connection service should resolve this issue. since, Connection service is only related to DeskI and Rich Client re-statrng wonu2019t impact other business objects components including java report panel.
All the Best,
Madhu....

SAP BPC 10NW Overflow converting from ' -10949993089200.0000000

Hi,
I came across this problem when running the following package activities:
1. Load Transactions Data from BW InfoProvider UI (Log says it is rejected file but it was recorded in BPC)
Rejected Records:
12 ,510000,INPUT,Budget,SMKR,PL99,G_NONE,I_NONE,SSG1KR10SMKRPC,LC,2014.12,-10949993089200.00
Line0 :Overflow converting from ' -10949993089200.0000000 '
2. Clear Package
Rejected Records:
700000,INPUT,Budget,SMKR,PL99,G_NONE,I_NONE,SSG1KR10SMKRPC,LC,2014.12,10840821887500.0000000
Line0 :Overflow converting from ' 10840821887500.0000000 '
Anybody can share idea how to handle this? Appreciate the help.
Thanks.

Transformation File:
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=-1
ROUNDAMOUNT=*MAPPING
*MAPPING
ACCOUNT=0GL_ACCOUNT(5:10)
AUDITID=*STR(INPUT)
CATEGORY=*STR(Budget)
ENTITY=0COMP_CODE
FLOW=0GL_ACCOUNT(1:5)
GROUPS=*STR(G_NONE)
INTERCO=*IF(0PCOMPANY=*STR() then *STR(I_NONE);0PCOMPANY=*STR(999999) then *STR(I_NONE);0PCOMPANY)
PFCTR=*IF(0PROFIT_CTR=*STR() then *STR(PC_NONE);*STR(SSG1)+0PROFIT_CTR)
RPTCURRENCY=*STR(LC)
TIME=0FISCPER
AMOUNT=ZYTD_PL
*CONVERSION
ACCOUNT=COV_DATA_IMPORT_BSPL.xls
ENTITY=COV_ENTITY_MD.xls
FLOW=COV_DATA_IMPORT_BSPL.xls!FLOW
TIME=COV_DATA_IMPORT_BSPL_TIME.xls

DTP Request Error: "Overflow converting from ''" (Executing rule)

Hi,
I have an error for every dataset in my dtp:
Anyone an idea?
Error Ercords Display says:
Runtime error while executing rule
Longtext:
Diagnosis
     An error occurred while executing a transformati
     The exact error message is:
     Overflow converting from ''
     The error was triggered at the following point i
     GPD5DB2R35UPL1XXBS1ICKUVG8O 2313
System Response
     Processing the data record has been terminated.
Procedure
     The following additional information is included in the hig
     node of the monitor:
     o   Transformation ID
     o   Data record number of the source record
     o   Number and name of the rule which produced the error

Hi,
It seems that there is a error in transformation routine. Are you filling any internal table or converting any data type in the routine. Go to ST22 it will show you dump and give you line at which error is coming OR if you click on the message in DTP monitor it will divert you to the errorneous line.
Regards,
Viren

While loading master data to infoobject Load failed due to Duplicate record

Hi Experts,
While loading master data to the infoobject load failed .
The error it is showing is 24 Duplicate record found. 23 recordings used in table.
Pls help me to solve this issue
Thanks in Advance.
Regards,
Gopal.

In infopackage settings u will find a checkbox for 'delete duplicate records'.
I think it appears beside the radio button for 'To PSA',and also tick checkbox for 'subsequent update to data targets'.
This will remove the duplicate records(if any) from the PSA before they are processed further by transfer and update rules.
Use this and reload master data.
cheers,
Vishvesh

Load failed due the spl char

Hello Gurus,
I am working on BW 3.5 version, While loading the data to different ODS's. The loads are getting fail becoz of the below error.
*Value 'PPS2AEGN16ZZZSFBA ' (hex. '505053324145474E31365A5A5A53464241A0 ') of characteristic 0MATERIAL contains invalid*
the problem with the above material value is it included space(blank) at the end.
For this i have included the FM 'SCP_REPLACE_STRANGE_CHARS' in the Transfer Rules to ignore all the special Char for the 0material Info object. but still i am facing the same problem.
Kindly let me know if there is another solution for this. or i am missing any thing.
Thanks and Regards
Edited by: KK on Aug 13, 2009 12:10 AM

Hello thanks for ur response,
Space is on the right side of the material. hope i can maintain at both left and right sides bcoz to overcome the problem in future.
what i hav to include for the same kindly let me know
Regards

Master data load failed due to duplicate records .

hello friends ,
need some help .
I am loading the master data from soruce sys , and it is throwing error of duplicate 56 records.
I repeated the step , but found the same error once again .
i could not find out the duplicate record , as thr are more than 24000 records , and in this 56 are duplicate . and this duplicate also looks like same.
when i click on error records , it is showing me the below procedure .
maintain the attribute in Psa SCREEN .
I could not find the duplicate records , could you please let me know how can i maintain this .
Regards

Hi ,
Reload the masterdata by cheking ignoreduplicate records check box.since the master data has overwriting capability the duplicate records will be overwritten
cheers,
Swapna.G

Overflow converting from '-6.34431e+010'

hi,
when i was performing data transfer process in one process chain.
that time this problem came.
Also these message are coming. Message no. RSTRAN301
Message no. RS_EXCEPTION000
also this line are comeing with message..
Data package 1 / 07.06.2011 05:46:12 / Status 'Processed with Errors'
Message no. SY530
Message no. RSBK231
Message no. RSBK257
when i delete request in target admin. then again repair process chain. It was giving same error
So can u tell me about this problem.

Hi,
BW Reporting only supports currency-dependent amounts of length 17 in the standard system.
Kindly check these OSS notes :
1316587 - Arithmetic overflow in statistics
460652 - Extending key figures in BW
If these doesnot help you , check in the PSA for the error record .
Locate the infoobject for which the error is occuring .
Then check for the infoobjects datatype in RSD1 and check whether the datatypes are matching or not .
Also check this SAP help link:
[SAP help|http://help.sap.com/saphelp_webas620/helpdata/en/fc/eb2fd9358411d1829f0000e829fbfe/frameset.htm]
Regards,
Lokesh

Need help finding the row where BI load failed

Hi all,
We use an ETL tool to load data from our staging database into our production data warehouse environment. The environment is Oracle 10g Release 1 on Red Hat Enterprise Linux Server. The ETL tool is Business Objects Data Integrator. At hand the issue is that the data load failed due to an Oracle error
ORA-12899: value too large for column
When I examined the table definition in question, the load fails on one of the table columns in staging since the column is a VARCHAR2 with length of 5 and the ETL load wants to load a value for the table of length 13.
One possible solution is to change the column definition to accomodate the data load. However, since this is a production system, I cannot do this right now.
Is there a method to find exactly what row it failed on during the ETL load for the table in question?
Thanks!
B. Scott

1) Yes, DML error logging is nice feature but it is New Feature in Oracle Database 10g Release 2.
2) Some tools (e.g. Oracle Warehouse Builder) enable you to run your "mappping" (ETL job) in 2 modes - set based (single transaction INS/UPD/DEL/MERGE) or in row based mode (PL/SQL loop, row by row processing). OWB even enables failover mode (I failed in set-based mode, let's failover to row-based mode to find out where is the problem; the errors will be reported in log; you can set maximum number of errors before the mapping terminates with failure status).
3) If you do not have this functionality in your tool than I suggest: Try to understand the transformation and investigate the source data. You can usually find the culprit in the source data. Sometimes you can even extract the SQL behind the transformation and run CTAS (create table as select) and find the exceptions.
Regards,
Pavel

Import of a request failing : ERROR: connect failed due to DbSL load lib fa

Hi,
I am using ecc6, on hp-unix and oracle as database.
When i try to import a request from stms, i get this error.
DURING IMPORT ERROR:
    Transport control program tp ended with error code 0249
    Errors: connect failed due to DbSL load lib failure
TP ERROR:
Transport control program tp ended with error code 0249
    Message no. XT200
Diagnosis
    An error occurred when executing a tp command.
      Command:        IMPORT E07K901512 DEV client100 U01 pf=/usr/sap/tr
      Return code:    0249
      Error text:     connect failed due to DbSL load lib failure
      Request:        E08K901525
System Response
    The function terminates.
Procedure
    Correct the error and execute the command again if necessary.
THEN I TRIED TO IMPORT USING TP COMMAND:
WITH OUT DIR_LIBRARY
% ./tp connect DEV
This is ./tp version 370.00.09 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
% ./R3trans -d
This is ./R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
unicode enabled version
2EETW169 no connect possible: "environment variable DIR_LIBRARY is not set."
./R3trans finished (0012).
% # export DIR_LIBRARY=/usr/sap/DEV/SYS/exe/run
% ./R3trans -d
This is ./R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE                           --- ORACLE_SID =
'DEV'"
./R3trans finished (0012).
% ./tp connect DEV
This is ./tp version 370.00.09 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
COULD SOMEONE GIVE ME A SOLUTION TO OVERCOME THIS.
YOUR SOLUTION AND GREATELY APPRITIATED.
REGARDS,
DHANANJAY

Hi Dhanajay,
Firstly check if R3trans -d is working fine.
If so, please chek if the following parameters are set properly.
DIR_LIBRARY=/usr/sap/<SID>/SYS/exe/run
TRANSDIR = ....\trans
<SID>/DBHOST = <HOSTNAME>
<SID>/DBNAME = <SID>
<SID>/DBTYPE = ora
Execute the below command and check the transport profile:
tp check all pf=/usr/sap/trans/bin/TP_DOMAIN_<SID>.PFL
Please confirm the permission of the /oracle/ directory
The permission of the /oracle should be 755.
Also check if the import queue is not locked.
Also please ensure the Kernel is of latest version, if not, please update the DBSL shared library.Please look at the note 19466.
Finally you can try once distributing and activating the transport routes once.
When you executed command R3trans -d logfile trans.log will be created.
Please check this file for exact error information.
Paste the log file here.
Let us know the outcome.
Regards,
Sujit.

Overflow when converting from "3.60001e+11"

Hi Guys,
I'm Working with my PO using MIRO, I don't know why the error occurs. I've used the SAP Version 620 but end up with an error, then used Version 710 and successfuly created the transaction, but I'm stacked with version 620. I'm not allowed to transact it using the Version 710 that's why im looking for a patch or upgrade within 620 that i can use so that it can be solve.
I'm in need of your help guys. I know there someone out there that can help me.
THE ERROR
Runtime Errors         CONVT_OVERFLOW
Exception              CX_SY_CONVERSION_OVERFLOW
       Occurred on     03/28/2011 at 01:00:47
Overflow when converting from "3.60001e+11"
What happened?
Error in ABAP application program.
The current ABAP program "SAPLEINS" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_CONVERSION_OVERFLOW',
was neither
caught nor passed along using a RAISING clause, in the procedure
"DISTRIBUTE_ACC_ASSIGN_RE" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
When attempting to convert the value "3.60001e+11",
an overflow occurred.
How to correct the error
The exception must either be prevented, caught within the procedure
"DISTRIBUTE_ACC_ASSIGN_RE"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:

I won't post here if i already got the answer in SAP notes. I've spent 3 days searching for the answer. The only answer i got is the upgrade but can't be consider. OSS notes didn't provide me any answer. Hope u can help me
Edited by: docgon on Mar 30, 2011 2:38 AM

TP error: connect failed due to DbSL load lib failure

Hi All,
I have prepared Quality system from Production system as System copy.I have upgarded Kernel from 620 to 640 in Quality system.
After Kernel upgrade , Server details are as below
Operating System : windows 2003 IA 64
Database : SQL server 2000 IA 64
Kernel :640 and compiled for 64 bit non unicode system ,
patch number is 43.
SAP : SAP R/3 4.7
Before kernel upgrade , server details are as below
Operating System : windows 2000 server
Database : SQL server 2000
Kernel :620 and compiled for Non unicode system ,patch number
is 1363
SAP : SAP R/3 4.7
I am able to transport request from Development to Quality . But when I try to import request from Quality I am getting error message "Connect failed due to DBSL Load lib failure"
Error message is " connect failed due to DBSL load lib failure
cannot find the DLL dbmssslib.dll in path( K:\usr\sap\NBQ\SYS\exe\run)
problem when loading DB-dependent DLLs."
I have set Environmnet variable ( DBMS_TYPE value as mss) for nbqadm user.
I have seen that dbmssslib.dll file is exist in exe/run path.
Does anyone having an Idea , how to resolve this issue.Pls help me
Thanks in advance
Regards
Venu

Hi ,
Thanks for all
Issue is resolved by myself.
Instead of update Kernel to 640 , I have downloaded latest 620 kernel patch on IA 64 .
Since my production server is running on x86 and 620 kernel , i have downloaded 620 kernel for IA 64 .
That resolved my issue.
Regards
Sai

What to do when load fails in PC due to bad characters?

Hi guys
i have a process chain failing every day because of some bad characters coming in the load. its a text load and due to these characters it fails every day. now what is the proper procedure in production to get this fixed? i know i can edit the bad cahracters in PSA, but i dont know what those bad characters are so what to do ?
do i go back to the source system fix it there or fix it in BI some how? can some one explain this with his experience supporting?
Thanks
Adnan

it is not your responsibility to make sure that the data input is right, but you can take the extra effort to make sure tht it is right by asking your business users and then the mm team about it, check in r3, under the mm module try mm03 or mm05 to find is tht material exists, if not there is something wrong, but from the bw perspective tht record is faulty and needs to be corrected if the number of records this happens is very less then make the changes in psa and then load from the psa, if ur using bi then u need to make ur error stanck and error dtp.
so if the number of reocrds r less then make changes with consent of ur business team but if they are huge then a routine should be written to eliminate all characteristics with #$ and so on, adding it in rskc might be a option if tht material number actually exists with $%$^*&( those symbols which is most unlikely.
check with u r business users first, contact the mm team.

Load getting failed due to short dump

Hi All,
Process Chain is getting failed due to following short dump Include Report LFZI_CA_PCA_DERIVATIONSU37 not found. Please suggest on rectifying this dump. Its a delta load.
Regards,
Asim

Hi All
As requested please find details short dump below. And datasource name is this GECPC_GLPCP and its extractor is ZPCC_V_GLPCP.
Short text
   Syntax error in program "SAPLZFI_CA_PCA_DERIVATIONS ".
hat happened?
   Error in the ABAP Application Program
   The current ABAP program "GP9IQHCDEPFH201E24O25IAYXXW" had to be terminated
    because it has
   come across a statement that unfortunately cannot be executed.
   The following syntax error occurred in program "SAPLZFI_CA_PCA_DERIVATIONS " in
    include "LZFI_CA_PCA_DERIVATIONSUXX " in
   line 77:
   "INCLUDE report "LZFI_CA_PCA_DERIVATIONSU37" not found"
   The include has been created and last changed by:
   Created by: "SAP* "
   Last changed by: "SAP* "
   Error in the ABAP Application Program
   The current ABAP program "GP9IQHCDEPFH201E24O25IAYXXW" had to be terminated
    because it has
   come across a statement that unfortunately cannot be executed.
What can you do?
    Please eliminate the error by performing a syntax check
    (or an extended program check) on the program "SAPLZFI_CA
    You can also perform the syntax check from the ABAP Edito
    If the problem persists, proceed as follows:
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can lo
    at and manage termination messages, and you can also
   keep them for a long time.
Error analysis
    The following syntax error was
    "INCLUDE report "LZFI_CA_PCA_DE
How to correct the error
    Probably the only way to elimin
    If you cannot solve the problem
    notification to SAP, include th
    1. The description of the curre
       To save the description, cho
    (Unconverted)".
    2. Corresponding system log
Display the system log by callin
Restrict the time interval to 10
ter the short dump. Then choose "
nconverted)".
If the problem occurs in a probl
ogram: The source code of the pro
In the editor, choose "Utilities
ilities->Upload/Download->Downloa
Details about the conditions und
tions and input led to the error.
Information on where terminated
    Termination occurred in the ABAP program "GP9IQHCDEPFH201E24O25IAYXXW" - in
     "START_ROUTINE".
    The main program was "RSBATCH_EXECUTE_PROZESS ".
    In the source code you have the termination point in line 102
    of the (Include) program "ZFICA_DERIVE_PCA_OBJECTS_S".
    The program "GP9IQHCDEPFH201E24O25IAYXXW" was started as a background job.
    Job Name....... "BIDTPR_6726959_1"
    Job Initiator.. "ALEREMOTE"
    Job Number..... 17271800
Line SourceCde
   72 ASSIGN 'L_DERIVE_CHRT_ACCTS-UPD_CHRT_AC
   73 assign (<derive_chrt_accts_field>) to
   74 IF <derive_chrt_accts> IS ASSIGNED.
   75   zzi_attributes_upd-chrt_accts_upd = '
   76 ENDIF.
   77 zzi_attributes_upd-/bic/gactivity_upd
   78 zzi_attributes_upd-/bic/gfactv_upd
   79 zzi_attributes_upd-/bic/gglobacct_upd
   80 zzi_attributes_upd-/bic/ggforacc_upd
   81 zzi_attributes_upd-/bic/ggrracc_upd
   82 zzi_attributes_upd-/bic/ggra_code_upd
   83 zzi_attributes_upd-/bic/gsegmtion_upd
   84 zzi_attributes_upd-/bic/ggaapflg_upd
   85 zzi_attributes_upd-/bic/gsub_item_upd
   86 zzi_attributes_upd-/bic/gsegmnt_upd
   87 zzi_attributes_upd-/bic/gacctgrp_upd
   88 zzi_attributes_upd-comp_code_details_up
   89 zzi_attributes_upd-gbfi0600_upd
   90 zzi_attributes_upd-/bic/zaccsuf_upd
   91 zzi_attributes_upd-/bic/gconunit_upd
   92 zzi_attributes_upd-/bic/gtpunit_upd
   93 *--------------------------------------
   94 * Store a copy of the source fields if
   95 *--------------------------------------
   96 MOVE-CORRESPONDING <source_fields> TO z
   97 CLEAR zze_attributes.
Runtime Errors         SYNTAX_ERROR
Date and Time          04.08.2014 17:27:39
    98 *----------------------------------------------------------------------*
    99 * Derive all PCA fields for reporting
   100 *----------------------------------------------------------------------*
   101
>>>>> CALL FUNCTION 'ZFI_CA_DERIVE_PCA_ATTRIBUTESII'
   103   EXPORTING
   104     i_zfi_ca_pca_attributes     = zzi_attributes
   105     i_zfi_ca_pca_attributes_upd = zzi_attributes_upd
   106     msgty                       = 'I'
   107     recno                       = <source_fields>-record
   108   IMPORTING
   109     e_zfi_ca_pca_attributes     = zze_attributes
   110   TABLES
   111     monitor_recno               = lt_monitor_recno.
   112
   113 *----------------------------------------------------------------------*
   114 * On the recurrsive load delete entries where the data is the same
   115 *----------------------------------------------------------------------*
   116 IF zzg_realignment_run = 'X'.
   117   IF zzi_attributes = zze_attributes.
   118     DELETE source_package INDEX la_tabix.
   119   ELSE.
   120     MOVE-CORRESPONDING zze_attributes TO <source_fields>.
   121   ENDIF.
SY-SUBRC 0
SY-INDEX 3
SY-TABIX 1
SY-DBCNT 10
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE Execute Batch Proces
SY-MSGTY E
SY-MSGID R7
SY-MSGNO 057
SY-MSGV1 ZBAL_LC
SY-MSGV2 A
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20140804
SY-UZEIT 172720
SY-XPROG SAPCNVE
SY-XFORM CONVERSION_EXIT
No.   Ty.          Program                             Include                             Line
      Name
    8 FUNCTION     GP9IQHCDEPFH201E24O25IAYXXW         ZFICA_DERIVE_PCA_OBJECTS_S            102
      START_ROUTINE
    7 METHOD       GP9IQHCDEPFH201E24O25IAYXXW         ZFICA_DERIVE_PCA_OBJECTS_S            102
      LCL_TRANSFORM=>START_ROUTINE
    6 METHOD       GP9IQHCDEPFH201E24O25IAYXXW         GP9IQHCDEPFH201E24O25IAYXXW          1299
      LCL_TRANSFORM=>EXECUTE
    5 METHOD       CL_RSTRAN_TRFN_CMD============CP    CL_RSTRAN_TRFN_CMD============CM005    70
      CL_RSTRAN_TRFN_CMD=>IF_RSBK_CMD_T~TRANSFORM
    4 METHOD       CL_RSBK_PROCESS===============CP    CL_RSBK_PROCESS===============CM00Q    93
      CL_RSBK_PROCESS=>PROCESS_REQUEST
   3 METHOD       CL_RSBK_PROCESS===============CP    CL_RSBK_PROCESS===============CM002    13
      CL_RSBK_PROCESS=>IF_RSBATCH_EXECUTE~EXECUTE
    2 FUNCTION     SAPLRSBATCH                         LRSBATCHU13                           437
      RSBATCH_EXECUTE_PROCESS
    1 EVENT        RSBATCH_EXECUTE_PROZESS             RSBATCH_EXECUTE_PROZESS               374
      START-OF-SELECTION
REQUEST
    DTPR_1FR9TKO2U6M616ATG9C2EYKRH
    455553453544353433345434345454
    4402F16294BF256D61614793259B28
    000000000000000000000000000000
    000000000000000000000000000000
DATAPACKID
    000001
    333333
    000001
    000000
    000000
MONITOR
    Table[initial]
SOURCE_PACKAGE
    3000000001012P2013K4AU0ACD 2013005          00                                               0
    3333333333333533334345344423333333222222222233222222222222222222222222222222222222222222222223
    300000000101202013B415013402013001000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    3333333333333533334345344423333333222222222233222222222222222222222222222222222222222222222223
    300000000101202013B415013402013002000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    3333333333333533334345344423333333222222222233222222222222222222222222222222222222222222222223
    300000000101202013B415013402013003000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    3333333333333533334345344423333333222222222233222222222222222222222222222222222222222222222223
    300000000101202013B415013402013004000000000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000
00000000000000000000000000000000000
33333333333335333343453444233333332
300000000101202013B4150134020130050
00000000000000000000000000000000000
00000000000000000000000000000000000
Table IT_110723[600000x1144]
{A:114*\TYPE=%_T00003S00000115O0000
Table reference: 3570
TABH+ 0(20) = 90A161080000000060C1
TABH+ 20(20) = F20D000083B00100C027
TABH+ 40(16) = 03730000242D00000400
store        = 0x90A1610800000000
ext1         = 0x60C1190C00000000
shmId        = 0     (0x00000000)
id           = 3570 (0xF20D0000)
label        = 110723 (0x83B00100)
fill         = 600000 (0xC0270900)
leng         = 1144 (0x78040000)
loop         = 128   (0x80000000)
xtyp         = ROL.115.11556
occu         = 4     (0x04000000)
accKind      = 1     (ItAccessStand
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniNo)
keyKind      = 1     (default)
cmpMode      = 8     (cmpManyEq)
occu0        = 1
stMode       = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
isUsed       = 1
isCtfyAble   = 1
hasScndKeys = 0
hasRowId     = 0
scndKeysOutdated = 0
scndUniKeysOutdated = 0
----- Shareable Table Header Data -----
tabi         = 0xB008190C00000000
pgHook       = 0x404CE73B00000000
idxPtr       = 0x0000000000000000
id           = 61767 (0x47F10000)
shmTabhSet   = 0x0000000000000000
refCount     = 1     (0x01000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 606204 (0xFC3F0900)
lineAlloc    = 600004 (0xC4270900)
shmVersId    = 0     (0x00000000)
shmRefCount = 2     (0x02000000)
rowId        = 18446744073709551615
scndKeyAdmin = 0x0000000000000000
----- 1st level extension part --------
regHook      = 0xC8C0190C00000000
collHook     = 0x0000000000000000
ext2         = 0x0000000000000000
RI-CLUSTR
   0
   00
   00
ZE_ATTRIBUTES
                     00000
   22222222222222222233333
   00000000000000000000000
   00000000000000000000000
   00000000000000000000000
ZI_ATTRIBUTES
   AU0A    070221000020130
   45342222333333333333333
   15010000070221000020130
   00000000000000000000000
   00000000000000000000000
ZI_ATTRIBUTES_UPD
   XXXXX XXXXXX XX XXXX
   55555255555522552555522
   88888088888800880888800
   00000000000000000000000
   00000000000000000000000
SOURCE_FIELDS>-RECORD
   1
   0000
   1000
T_MONITOR_RECNO
   Table[initial]
ZG_REALIGNMENT_RUN
   2
Regards,
Asim
GECPC_GLPCP

Load failed due to Overflow converting from 853156+16

Similar Messages

Maybe you are looking for