Loading a blob from forms ?
I would like to know if anyone has loaded a file into the
database in a blob field with forms not using OLE in client
server mode.
Well, sorry for the delayed response.
You can load Word Documents also in forms. For this you have to
use OLE interface.
Just, create an OLE container for your database item (say,
notes_text) and use the following code for loading the document
to that item.
FORMS_OLE.INITIALIZE_CONTAINER (:notes_text, '<file_name>');
FORMS_OLE.CLOSE_SERVER (:notes_text);
The above code will initialize the OLE container with specified
document. After initializing the OLE container, just commit the
record to save the document into database.
Hope the above helps you.
Best Wishes,
Ganeasn
Similar Messages
-
Jfmerge: [240]Failure loading colour palette from form file.
Hi All,
I need your help. I am new to JetForm and have to use it because of my work. Recently I have been assigned a task which is to amend an existing form, however, when I opened it with the JetForm Designer, it prompted me with message #4043 with following information:
The current settings for Symbol Set handling are different
from when the form was last saved.
Form: Convert is Yes,950,950
Current: Convert is Yes,1252,850
I skipped the warning message and just compile the MDF file directly without any changes. Then, I just got the "jfmerge: [240]Failure loading colour palette from form file." error message during the printing process. May I know how could I fix it? Please help and advise.
Thanks,
CharoiteHello,
I have exactly same problem than you while opening an existing .ifd file :
The current settings for Symbol Set handling are different from when the template was last saved.
Template : Convert is No,936,850
Current : Convert is N0,1252,850
I suppose it is due to chinese characters (Simsun font) bad installed on my desktop, but it is only hypothesis.
Did you achieve to avoid this message since 05/2011 ? -
Inserting to BLOB from Forms 6i
I need to take one of the following file types from a client machine and insert it into a BLOB column on the database:
Word, Excel, PDF, MS Project, GIF or JPG
I am using oracle forms 6i, the database is Oracle 9.2.
To get the file into the form, I believe I need to have the blob column defined as an ole_container. To put the file into the container, I need something like this:
:blob_name := GET_FILE_NAME('c:\');
if :attchmnt_name is not null
then
Initialize_Container('ATTCHMNT_FILE',:blob_name);
end if;
Am I missing something here?Thanks for your response, Harish.
Unfortunately, I am still unable to connect to the database under Forms 6i or SQL*Plus 8.0 (under Oracle - OraHome81).
I have tried to modify the TNSnames.ora file as you suggested, but since there are several TNSnames.ora files under similar directory, I cannot be absolutely sure if I have modified the specific file that you intended me to. Below are the directories of the files that I tried to modify:
* Oracle\OraDev\NET80\ADMIN
* Oracle\OraAppSvr\NET80\ADMIN
* Oracle\oraenterprise\NET80\ADMIN
* Oracle\Ora81\NETWORK\ADMIN
Enclosed is also the modification that I added in the TNSnames.ora:
orcl.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = oracle.cba.uh.edu)
(Port = 1521)
(CONNECT_DATA = (SID = ORCL)
Moreover, I am also not sure about your last suggestion to add environmental variable in the registry of Forms. I would really appreciate it if you can elaborate on this.
Again, thanks very much for your help, Harish. I greatly appreciate it. -
How to load the data from excel file into temprory table in Forms 11g?
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinDeclare
v_full_filename varchar2(500);
v_server_path varchar2(2000);
v_separator VARCHAR2(1);
v_filename VARCHAR2(400);
filename VARCHAR2 (100);
v_stop_load varchar2 (2000);
v_rec_error_log varchar2(4000);
v_error_log varchar2(4000);
ctr NUMBER (12);
cols NUMBER (2);
btn number;
RES BOOLEAN;
application ole2.obj_type;
workbooks ole2.obj_type;
workbook ole2.obj_type;
worksheets ole2.obj_type;
worksheet ole2.obj_type;
cell ole2.obj_type;
cellType ole2.OBJ_TYPE;
args ole2.obj_type;
PROCEDURE olearg
IS
args ole2.obj_type;
BEGIN
args := ole2.create_arglist;
ole2.add_arg (args, ctr);
ole2.add_arg (args, cols);
cell := ole2.get_obj_property (worksheet, 'Cells', args);
ole2.destroy_arglist (args);
END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
,file_name => null
,file_filter => 'Excel files (*.xls)|*.xls|'
||'Excel files (*.xlsx)|*.xlsx|'
,message => 'Choose Excel file'
,dialog_type => null
,select_file => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
application := ole2.create_obj ('Excel.Application');
ole2.set_property (application, 'Visible', 'false');
workbooks := ole2.get_obj_property (application, 'Workbooks');
args := ole2.create_arglist;
ole2.add_arg (args, filename); -- file path and name
workbook := ole2.get_obj_property(workbooks,'Open',args);
ole2.destroy_arglist (args);
args := ole2.create_arglist;
ole2.add_arg (args, 'Sheet1');
worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
ole2.destroy_arglist (args);
ctr := 2; --row number
cols := 1; -- column number
go_block('xxx');
FIRST_RECORD;
LOOP
--Column 1 VALUE --------------------------------------------------------------------
olearg;
v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
:item1 := v_stop_load;
cols := cols + 1;
--Column 2 VALUE --------------------------------------------------------------------
olearg;
:item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
cols := cols + 1;
--<and so on>
ole2.invoke (application, 'Quit');
ole2.RELEASE_OBJ (cell);
ole2.RELEASE_OBJ (worksheet);
ole2.RELEASE_OBJ (worksheets);
ole2.RELEASE_OBJ (workbook);
ole2.RELEASE_OBJ (workbooks);
ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped. -
Error in Loading a BLOB Column in Oracle Database from 1 to diff schema
Hi ALL,
I am in a POC where in I have to load a BLOB data from 1 schema to a different schema ie from Staging to Target.
I load my staging(Oracle Schema ) through Oracle PLSQL. Now I have to load to my ODS.
I am using the LKM (LKM SQL to Oracle) and IKM (IKM Oracle Incremental Update PLSQL).
It errors out in the 3rd step 3-Loading-SS_0 Load Data
The script used and the error message is in the attachment. However if I run the script manually it runs and the Load happens successfully. Also I was able to load the same BLOB objects it the tables were in the same schema(In this case LKM is bypassed).
Any Thoughts on this?
The Error I receive is:
java.lang.NumberFormatException: For input string: "4294967295"
at java.lang.NumberFormatException.forInputString(Unknown Source)
at java.lang.Integer.parseInt(Unknown Source)
at java.lang.Integer.parseInt(Unknown Source)
at oracle.jdbc.driver.OracleResultSetMetaData.getPrecision(OracleResultSetMetaData.java:303)
at com.sunopsis.sql.SnpsQuery.getResultSetParams(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Thanks & Regards,
KrishnaHi,
Are you at the same database? If yes is better to grant select, at the schemas where is the source, to your Staging Area user.
Then, at topology, define all physical schemas under the same Data Server.
If you are at distinct database a good solution is to use a DBLink (KM) because when a SQL to SQL KM is used, the data go thru agent, making a conversion to Java.
I'm not sure if it can handle LOB's fields... Every time that I needed to use it was in the ways that I described.
Does it make any sense to you?
Cezar -
Hi,
I was wondering if anyone has called SQL*Loader from Forms?
What I am wanting to do is use Oracle Forms as the interface where you can specify a file that you can import into the database and it will use a set control file. Push the import button and SQL*Loader does the rest.
Is using Java code to call SQL*Loader from Forms a viable option, or is there an easier way to achieve the desired outcome.
Any ideas or guidance will be much appreciated.
Thanks,
Scott.Scott,
In forms, there's a HOST built-in command which is supposed to execute any o/s commands.
What you have to do is :
1. Bult up the string exacltly in the fashion which you will run in o/s
2. Call the HOST Built-in and pass in the string
Here's a example :
Declare
lOsCmd Varchar2(1000) := Null;
Begin
lOsCmd := 'sqlldr user-id=userid/passwd@connectStr '
|| ' control=c:\temp\abc.ctl log=c:\temp\abc.log '
|| ' bad = c:\temp\abc.log';
Host (lOsCmd, No_Screen);
End;
-- Shailender Mehta -- -
To load the image from appl. server to FORM
Hi all,
i have to fetch the image from Application server and Print in a form. i don't know how to load the image from appl. server to FORM.Through SE78 i guess we can load the image only from presentation server,,,,can anyone help on this????Hi Bhuvaneshwari ,
Through <b>SE78</b> you can fetch the image from application server.
Goto><b>Graphics</b>><b>BMAP(Bit map images)</b>>In <b>Name</b> parameter click <b>F4</b> for input help.>click on <b>execute</b> button.
These images are stored on document server.
There you can find images of application server.
Those images you can import.
Reward if helpful.
Regards,
Sandhya. -
Loading data from forms 6i to excel
I am trying to load data from forms 6i to excel. Everything is working, except excel spreadsheet do not release from memory.
The ole2.release_obj(cell); ... and so on does release obj but does not release excel.exe from memory. So if you will go to a task manager you will be able to see as many excel.exe processes as you loaded data. Can anybody let me know what to do?
Thanks
nullMaybe this will help.
http://www.orafaq.com/forum/t/32129/0/ -
How can we run SQL*Loader from forms. I guess HOST command will run the OS comman on the clinet. How do I invoke the Loader script on the server from the forms clinet?
-Ravi.Look..the oracle server is in UnixWare 7 and the client PC
is on Windows XP Pro, but before install the Oracle Client Software into the client pc the builtin HOST doesn't work
then I install the Software in Windows XP pc and now I'm
working loading the txt file into the server on Unix,
Try to install the Oracle Client Software into the Citrix
client, I think it work. -
Error While loading a image from database
Purpose
Error While loading the Image from the database
ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
ORA-06512: at "Sys.HTP" ,line 1480
Requirement:
I am developing the web pages using PSP(Pl/sql Serverpages) . I have a requirement to show a image in the webpage. I got the following procedures from the oracle website.
I have created the following table to store the images
create table DEMO
ID INTEGER not null,
THEBLOB BLOB
And I also uploaded the Images. Now I am try to get a image from the table using the following procedure .But I am getting the error message line 25( htp.prn( utl_raw.cast_to_varchar2( l_raw ) );) .at it throws the following error messages
ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
ORA-06512: at "Sys.HTP" ,line 1480
Procedure that I used to get the image
create or replace package body image_get
as
procedure gif( p_id in demo.id%type )
is
l_lob blob;
l_amt number default 30;
l_off number default 1;
l_raw raw(4096);
begin
select theBlob into l_lob
from demo
where id = p_id;
-- make sure to change this for your type!
owa_util.mime_header( 'image/gif' );
begin
loop
dbms_lob.read( l_lob, l_amt, l_off, l_raw );
-- it is vital to use htp.PRN to avoid
-- spurious line feeds getting added to your
-- document
htp.prn( utl_raw.cast_to_varchar2( l_raw ) );
l_off := l_off+l_amt;
l_amt := 4096;
end loop;
exception
when no_data_found then
NULL;
end;
end;
end;
What I have to do to correct this problem. This demo procedure and table that I am downloaded from oracle. Some where I made a mistake. any help??
Thanks,
NatsHi Satish,
I have set the raw value as 3600 but still its gives the same error only. When I debug the procedure its throwing the error stack in
SYS.htp.prn procedure of the following line of code
if (rows_in < pack_after) then
while ((len - loc) >= HTBUF_LEN)
loop
rows_in := rows_in + 1;
htbuf(rows_in) := substr(cbuf, loc + 1, HTBUF_LEN);
loc := loc + HTBUF_LEN;
end loop;
if (loc < len)
then
rows_in := rows_in + 1;
htbuf(rows_in) := substr(cbuf, loc + 1);
end if;
return;
end if;
Its a system procedure. I don't no how to proceed .. I am really stucked on this....is their any other method to take picture from the database and displayed in the web page.....???? any idea..../suggesstion??
Thanks for your help!!!. -
Infopackage-Load Many Files from Application Server and later Archive/Move
Hi All..
I have a doubt, I have a requirement of take many files to load into BI 7.0.. I used the infopackage before with option:
Load Binary File From Application server
I load information successfully... only with one file ...but If I can load many files (with different names) like the next list.. I think it's not a good idea modify the file name (path) on infopackage each time).. :
*All of this files will be on one server that itu2019s map into AL11.. Like
Infopfw
BW_LOAD_20090120.txt
BW_LOAD_20090125.txt
BW_LOAD_OTHER_1.txt
u2026.
Etc..
This directory it's not in BW server.. It's other server..but I can load form this location (one file by one)
Could you help me with this questions:
- How can I Use an infopackage with routine that take all the files..one by oneu2026 in order of creation dateu2026and load into Target? Is it possible?.. I have some knowledge of ABAP.. but I don´t know exactly how I can say to system this logicu2026
- In addition is it possible move this files to other locationu2026 like into Infopfwarchive u2026 just to have an history of files loaded.
I saw that in infopackage you have an option to create a routine.. in ABAP codeu2026 Iu2019m a little bit confused because I donu2019t know how I can specify all the path..
I try with:
Infopfw
InfopfwFile.csv
Infopfw
This is the abap code that automatically you see and you need to modifyu2026
Create a routine for file name
This routine will be called by the adapter,
when the infopackage is executed.
p_filename =
p_subrc = 0.
Thank you for your ideas or recommendations.
AlHi Reddy, thank you for your answer
I have some doubuts.. when you explain me the option:
All the above files are appending dates at the end of the file....
You can load the files through infopackage by using Routines and pick the files based on date at the end of the file..***
I need to ask you if you think that when you know the date of the file and the infopackage pick each file... thi can work for many files??... or how it's possible control this process?
About this option, I want to ask you If when you menction Unix code... where it's programed this code?.. in the routine of BW Infopackage??
****Or
Create two folders in your BW in Application server level, in AL11 (ask Basis team)
I call it is F1 and F2 folders.
First dump the files into F1 I assume that the file name in F1 is "BW_LOAD_20090120.txt", using Unix code you rename the file and then keep in the same foleder F1 or move to F2.
Then create InfoPackage and fix the file name (i.e. you renamed), so you don't need to change everyday your file name at infopackage level.Because in AL11 everyday the file are overwrite.
To I get BW_LOAD_20090120.txt file in F1, then I renamed to BW_LOAD.txt and loaded into BW, then tomorrow I get BW_LOAD_20090125.txt in F1, then I renamed to BW_LOAD.txt....
so in this way it will work.You need to schedule the Ubix script in AL11.
This is the way how to handle the application server...I'm using the same logic.
Thank you soo much.
Al -
I want to load a picture from the Windows clipboard (and if not possible, then from the Labview clipboard) into actual numerical image data so that it can be processed in lab view. When I'm at the main screen where I can add controls, I see a section of controls called "Vision" in the tool bar where all the different controls can can be added from. When I go to the control called "Image" and put that on my form, and then look at the flowchart/blockdiagram programing window to see what inputs and outputs it has, I only see one output, and no inputs. And when I right click on it, I see NO way to load an image into the Image control. PLEASE help me.
Message Edited by Ben321 on 11-09-2008 04:32 PMHi Ben,
National Instruments has an image processing software called Vision and although I am not completely sure, I think the controls that you found in the control pallet are used in conjunction with the software. Depending on what kind of image processing you want to conduct in LabVIEW, you might want to consider purchasing that product.
If cost is an issue, there are functions in LabVIEW which allows you to take in image files and process them. However, please keep in mind that the capabilities are limited.
Images should be loaded onto LabVIEW not via the clipboard but through loading it from folders or directories. (There might be a way to and so if you find a way please let me know! I would like to know myself =D) If you open the function pallet by right clicking on the block diagram, in the programming folder you should find a directory called "Graphic and Sound". There, you'll find functions in which allows you to process images.
In the "Graphic Type" directory there should be a function called Read JPEG file.vi. There are also others which allows you to read png and bmp files. Please note that there are functions which write as well. Set a file path on the block diagram and inside the "Grahic and Sound" there is a "Picture Function" directory and inside there, there should be a function called "Draw Flattened Pixmap.vi" That changes the image into a format where you can process on LabVIEW. Inside the "Picture Function" directory there are several functions which allows you to process the specified image. Play around with it and see how it goes. And don't forget to Write the file in the end to save any changes.
I hope this helps
National Instruments Japan
Applications Engineer Taiki Hoshi -
Calling report from FORM - error Invalid value of paramente 'P_YEAR'
Hi guys,
Could you please help me to figure out what is going wrong
with my form which run a report?
I am using Developer suite 10g.
when i run report from report application it run fine,
but when i call that report from a form it gives me error.
I have checked the datatype, checked the parameter value
that I assign from form is available in the report parameter value.
What else do i have to check in order to run this report
from the form.
Error Message from Report Queue Manager:
Invalid value for parameter 'P_YEAR'.
Your insight will be appreciated.Thank you for reply Denis,
Here is the code which run_report from form.
DECLARE
-- variables for running individual reports
report_filename VARCHAR2(40);
var_reportpath VARCHAR2(100);
report_otherparms VARCHAR2(200);
-- variables to keep track of successful reports in silent mode
rep_status VARCHAR2(40);
rep_req NUMBER := 0;
rep_count NUMBER := 0;
dummy NUMBER;
-- variables to load the report names and checkboxes into the parameter list
pl_id PARAMLIST;
plname VARCHAR2(20) := 'rpt_list';
-- variables to loop through the parameter list and run the reports
i NUMBER;
split_loc NUMBER;
param_value VARCHAR2(40);
checkbox_name VARCHAR2(40);
report_basename VARCHAR2(40);
svc_name VARCHAR2(4);
run_report BOOLEAN;
disp_exist BOOLEAN := get_current_service_count( :global.filename_prefix, 'DISP',
:reports_control.year_list, :reports_control.quarter_list,
:reports_control.group_list );
hosp_exist BOOLEAN := get_current_service_count( :global.filename_prefix, 'HOSPICE',
:reports_control.year_list, :reports_control.quarter_list,
:reports_control.group_list );
orth_exist BOOLEAN := get_current_service_count( :global.filename_prefix, 'O/P',
:reports_control.year_list, :reports_control.quarter_list,
:reports_control.group_list );
BEGIN
-- Are any reports selected?
IF BOXES_ARE_CHECKED(:System.Cursor_Block,'PRINT_NULL_REPORT') THEN
if not CHECKBOX_CHECKED('print_null_report') then
disp_exist := TRUE;
orth_exist := TRUE;
hosp_exist := TRUE;
end if;
-- Create Report Parameter Listing
pl_id := GET_PARAMETER_LIST(plname);
if NOT ID_NULL(pl_id) then
DESTROY_PARAMETER_LIST(pl_id);
end if;
pl_id := CREATE_PARAMETER_LIST(plname);
if ID_NULL(pl_id) then
GENERIC_ALERT('Error creating report listing');
RAISE Form_Trigger_Failure;
end if;
ADD_PARAMETER(pl_id,'id1', TEXT_PARAMETER,'cover_page_intro!INTRO');
ADD_PARAMETER(pl_id,'id2', TEXT_PARAMETER,'utilization_profile!ALLUTIL');
ADD_PARAMETER(pl_id,'id3', TEXT_PARAMETER,'utilization_summary!ALL_SUMMARY');
ADD_PARAMETER(pl_id,'id4', TEXT_PARAMETER,'hiv_profile!HIV_PROFILE');
ADD_PARAMETER(pl_id,'id5', TEXT_PARAMETER,'wound_care_profile!WOUND_CARE_PROF');
ADD_PARAMETER(pl_id,'id6', TEXT_PARAMETER,'top_10_diagnosis!TOP10DIAG');
ADD_PARAMETER(pl_id,'id7', TEXT_PARAMETER,'diagnosis_profile!DIAG_PROFILE');
ADD_PARAMETER(pl_id,'id8', TEXT_PARAMETER,'physician_profile!PHYS_PROFILE');
ADD_PARAMETER(pl_id,'id9', TEXT_PARAMETER,'physician_specialty!PHYS_SPECIALTY');
ADD_PARAMETER(pl_id,'id10',TEXT_PARAMETER,'discharge_profile!DISCHARGE_PROFILE');
ADD_PARAMETER(pl_id,'id11',TEXT_PARAMETER,'acute_care_discharge!ACUTE_DSCHRG');
ADD_PARAMETER(pl_id,'id12',TEXT_PARAMETER,'excessive_cost_patients!EXCESSIVE_COST');
ADD_PARAMETER(pl_id,'id13',TEXT_PARAMETER,'provider_profile!PROV_PROFILE');
ADD_PARAMETER(pl_id,'id14',TEXT_PARAMETER,'service_profile!SERVICE_PROFILE');
ADD_PARAMETER(pl_id,'id15',TEXT_PARAMETER,'age_gender_profile!AGE_GENDER_PROF');
ADD_PARAMETER(pl_id,'id16',TEXT_PARAMETER,'network_services!NETWORK_SERVICES');
ADD_PARAMETER(pl_id,'id17',TEXT_PARAMETER,'thh_section_header!THH_COVER');
ADD_PARAMETER(pl_id,'id18',TEXT_PARAMETER,'thh_utilization!THH_UTILIZATION');
ADD_PARAMETER(pl_id,'id19',TEXT_PARAMETER,'thh_service_profile!THH_SVC_PROF');
ADD_PARAMETER(pl_id,'id20',TEXT_PARAMETER,'hit_section_header!HIT_COVER');
ADD_PARAMETER(pl_id,'id21',TEXT_PARAMETER,'hit_utilization!HIT_UTILIZATION');
ADD_PARAMETER(pl_id,'id22',TEXT_PARAMETER,'hit_service_profile!HIT_SVC_PROF');
ADD_PARAMETER(pl_id,'id23',TEXT_PARAMETER,'hme_section_header!HME_COVER');
ADD_PARAMETER(pl_id,'id24',TEXT_PARAMETER,'hme_utilization!HME_UTILIZATION');
ADD_PARAMETER(pl_id,'id25',TEXT_PARAMETER,'hme_service_profile!HME_SVC_PROF');
ADD_PARAMETER(pl_id,'id26',TEXT_PARAMETER,'disp_section_header!DISP_COVER');
ADD_PARAMETER(pl_id,'id27',TEXT_PARAMETER,'disp_utilization!DISP_UTILIZATION');
ADD_PARAMETER(pl_id,'id28',TEXT_PARAMETER,'disp_service_profile!DISP_SVC_PROF');
ADD_PARAMETER(pl_id,'id29',TEXT_PARAMETER,'hosp_section_header!HOSP_COVER');
ADD_PARAMETER(pl_id,'id30',TEXT_PARAMETER,'hosp_utilization!HOSP_UTILIZATION');
ADD_PARAMETER(pl_id,'id31',TEXT_PARAMETER,'hosp_service_profile!HOSP_SVC_PROF');
ADD_PARAMETER(pl_id,'id32',TEXT_PARAMETER,'orth_section_header!ORTH_COVER');
ADD_PARAMETER(pl_id,'id33',TEXT_PARAMETER,'orth_utilization!ORTH_UTILIZATION');
ADD_PARAMETER(pl_id,'id34',TEXT_PARAMETER,'orth_service_profile!ORTH_SVC_PROF');
ADD_PARAMETER(pl_id,'id35',TEXT_PARAMETER,'encounter_detail!ENCOUNTER_DETAIL');
--- set up other parameters to send to generate_report
if :reports_control.output_choices = 'FILE' then
var_reportpath := :global.report_directory || :reports_control.year_list;
if :global.filename_suffix <> '_A10G' then
var_reportpath := var_reportpath || 'q' || :reports_control.quarter_list;
end if;
var_reportpath := var_reportpath || '_G' || :reports_control.group_list || '_';
else
var_reportpath := '';
end if;
report_otherparms := 'p_year='||:reports_control.year_list;
if :global.filename_suffix <> '_A10G' then
report_otherparms := report_otherparms || ' p_quarter='||:reports_control.quarter_list;
end if;
report_otherparms := report_otherparms || ' P_REPORTGROUPID='||:reports_control.group_list;
--- Check if reports are checked and submit to Reports Server
for i in 1..35 loop
GET_PARAMETER_ATTR(pl_id,'id'||i,dummy,param_value);
split_loc := instr(param_value,'!');
checkbox_name := substr(param_value,1,split_loc-1);
report_basename := substr(param_value,split_loc+1,length(param_value));
if CHECKBOX_CHECKED(checkbox_name) then
run_report := TRUE;
svc_name := substr(report_basename,1,4);
if svc_name = 'DISP' then
if not disp_exist then
run_report := FALSE;
end if;
elsif svc_name = 'ORTH' then
if not orth_exist then
run_report := FALSE;
end if;
elsif svc_name = 'HOSP' then
if not hosp_exist then
run_report := FALSE;
end if;
end if;
if run_report then
report_filename := :global.filename_prefix || report_basename || '_10G';---- :global.filename_prefix || report_basename || :global.filename_suffix;
GENERIC_ALERT(report_filename || ' ' || report_otherparms);
rep_status := GENERATE_REPORT(report_filename,:reports_control.output_choices,var_reportpath,report_otherparms);
rep_req := rep_req + 1;
if rep_status = 'FINISHED' then
rep_count := rep_count + 1;
end if;
end if;
end if;
end loop;
-- if we're in silent mode, display a completion message
if :reports_control.output_choices = 'FILE' and CHECKBOX_CHECKED('chk_silent') then
SET_ALERT_PROPERTY('REPORT_CREATED',alert_message_text,
'' || rep_count || ' of ' || rep_req || ' reports created successfully');
dummy := SHOW_ALERT('REPORT_CREATED');
end if;
ELSE
dummy := SHOW_ALERT('select_report');
END IF;
END; -
Hello,
I am facing a problem from last some days..
When I am trying to open/create/update workflows from Designer 2010, then designer giving me an error "Unable to load workflow actions from the server. Please contact your server administrator".
I researched on internet for this error and found some possible reason like
Login user Permission issue
Error in custom actions
So that I checked for permission for login user, but it has administrator rights. and I tried to open workflow by removing custom activity code, but still exist.
also if I tried to create/update workflow for another site on same server then it works without any problem.
Can anybody please help me?
Many thanks,
Nitin
N i T i NHi NiTiN4u,
Thanks for your post.
First, here are some troubleshoot workflow error form Microsoft site:
http://office.microsoft.com/en-gb/sharepoint-designer-help/troubleshoot-workflow-errors-HA010237912.aspx#BM20
Second, have you tried to close the site and open it again in SharePoint Designer 2010?
Third, try to restart your IIS and share the results.
SharePoint 2010 -
How to Load the data from excel file(Extension is .CSV) into the temp.table
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinHello Sachin,
You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
Instead of copy values into forms you can save them in your temporary table.
Kind regards,
Alex
If someone's helpful or correct please mark it accordingly.
Maybe you are looking for
-
Can no longer see email message content after upgrading to ios 6
Since upgrading to iOS 6, my email loads (from three different email accounts), but when I click on an individual message the content of the message doesn't show, only the Subject line. If I click "reply" the content of the message appears. Anyone
-
Same Logical System Name, different Business System
Hi all, I have a problem regarding SLD and Integration Directory. The client is requiring me to use the same logical system name for two different business systems. It seems that this is not possible in XI. When I tried activating the business system
-
Transferring Files via File Sharing from 10.4.11 to 10.8.5
I am trying to get all of my files and information off of my laptop and migrate them to my new iMac. I have followed the instructions in regards for file sharing. However, when I bring up the finder and click on shared, the only thing that it will do
-
Save File as SVG using Illustrator
Generous Helper, I am trying to save the file as .SVG format using illustrator.. Openin in notepad the saved file shows the elements and attribute like: <svg version="1.1" id="Layer_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org
-
Apple TV shows a yellow warning sign and says there is a problem connecting to the network when I try to connect - either followed by "(-3)" or "(-6)" at the end of the message. Have tried diagnostics which confirms all ok, switched off and back on e