Loading data to Master Data fields

Can't understand how to load data from DataSource to Master Data of InfoCube. I create Transformation but don't see there how to choose Master Data fields of InfoCube - I don't see these fields there.
Thanks,
Olga

Hi,
Eg: If you have 0MATERIAL in cube, then all the attributes data will load to 0MATERIAL InfoObject, so in Cube you can find only 0MATERIAL and then in report you can find the Navigational attributes of the 0MATERIAL. So all the master data won't store into Cube.
That is the reason why we are calling Materdata Reusabilty in BW. So all master data will store sperately in Master data InfoObjaetcs.
Thanks
Reddy

Similar Messages

GETWA_NOT_ASSIGNED short dump when load business partner master data

Hi
I've this error GETWA_NOT_ASSIGNED short dump when load business partner master data, it's running in BI 7.0 with support package 12.
The error is because the field symbol is that pointed to the line of an internal table that was deleted.
I think that it's an incompatibility between subroutine and unicode.
Do you have idea about correct this error?
Regards
Jose.

Hi Ravi
Yes, it's a dump
It's when running a process chain to load Business partner master data
The error say:
-.You address a field symbol that pointed to the line of an internal table that was deleted.
-.You address a field symbol that was previously reset using UNASSIGN or that pointed to a local field that no longer exist.
-. You address a global function interface, although the respective function module is not active - that is, is not in the list of active calls. the list of active calls can be taken from this short dump.
I think that it's for the unicode corversion because I've the last support package 12 installed and the rest of the process chain are running perfect.
My hotmail mail is [email protected] if you need the screen shot.
Regards and thanks a lot
Jose

Need more Info about "Load transactional data when master data not loaded"

Hi,
Can you please explain me this option in the infopackage " Load transactional data when master data is not loaded"....
Say i load a transactional data record which has a material no. AAAXX.
In the fact table, the material no. is replaced with the corresp. DIM ID.
Now, assume that there is no entry for this Material no.
AAAXX in the master data table...so no DIM ID for it..
How is it then stored in the fact table ?
Hope i have managed to explain the scenario..
Thanks in advance,
Punkuj

Hello Punkuj K,
How r u ?
No, if the entry for that Material Number "AAAXX" is not there in the Master Data then it will create a SIDs & DIMs ID for that & Transaction Data will be loaded.
Use
Choose this indicator if you want to always update the data, even if no master data for the navigation attributes of the loaded records exists. The master data is generated from the loaded transaction data. The system draws SIDs. You can subsequently load the master data.
Dependencies
The texts, attributes, and hierarchies are not recognized by the system. Load the texts / attributes / hierarchies for the corresponding InfoObjects separately.
This function corresponds to the update. Possible errors when reading the master data into the update rules are not associated with this indicator.
Recommendation
We recommended loading the master data into the productive systems in advance. Select this indicator especially in test systems.
Best Regards....
Sankar Kumar
+91 98403 47141

Transactional Data Load without Respective Master Data in Place

Hi Folks,
Could anyone let me know if i could load transactional data without loading the respective master data. If yes, well could you give me a scenario when you do it. Also could you let me know the option of how to load transactional data without master data in place.
Best Regards,
Prithvi

Hi,
You can load transaction data without loading master data.
You have the option in the info package to load data even if no master data exists..
You may use it in cases where your transfer rules/update rules or routines donot refer to master data tables to populate transaction data..
Ashish

Cant fully load updated data to Master data attribute

Hi BW expert,
I meet an issue here, I am not able to load updated data to master data attribute. My loading selection is based on employee number range.
e.g employee number 00001 to 10000
However the data is successfully loaded to master data but lot of the attribute data are not updated. e.g 056, 057, 098, 0100.
I checked in PSA, there is no data updated for the attribute.
I checked in RSA3 in R/3, there are attribute data extracted.
Please advice, why attribute data is not updated when I load it in a range number. The attribute only work when I load one employee number.
Thanks.
regards,
Wesley Koo

check this:
Re: Error while running InfoPackage
Master data/text of characteristic 0MATERIAL already deleted
Master data/text of characteristic ZXVY already deleted
Hope it helps..

Is it possible to make a delta load for a Master data with Standard DS

I have a full load bringing huge data for master data with standard datasource.
I want to run a delta due to huge no. of records but when I create a new Infopackage it dont give a option for delta update.
Are delta loads specific to only standard or customized DS's or any other reason behind that ?

I kind of understand what you are asking about, but I am unclear as to how it pertains to our BO SDK.
You are wanting to find the differences between a large dataset and another large dataset.
I am not sure what an Infopackage is.
Are you using the BO Enterprise SDK or some other product?
Jason

What r the ways to reduce the load time of master data

Hi
The full load of the master data load IP is taking 18hr to 2 days loading on average 2516360 Records
Is their any option to reduce load time as its causing data base lock and impacting transports(other than data selection)
Thanks in advance
Anuj

You will have to do some research. What MD extractor are you talking about?
Test on R/3 system: First try to extract a considerable amount of records via transaction RSA3 in R/3 (10.000 or 100.000). Keep the time that it takes.
Extract the same into BW but only into PSA. Again measure the time.
Load data from PSA into datatarget and see how long this takes. You should now have a picture on where the performance problems are located.
Is the performance also bad for small loads or is there a boundary before which performance is ok. (in other words, is loading 200.000 records ten times longer then loading 20.000 records?)
Suspect the following in R/3:
- datasource enhancements in R/3. A redesign may improve your extraction in a big way.
- missing indexes. If you are extracting data from tables without proper indexes the extraction performance can be dramatic.
Suspect the following if loading to PSA is bad:
- Datapackage reads data in small chunks (much smaller than 50000 records). Overhead causes more time than the actual data transport.
- Network problems. Maybe the network is congested by other servers?
If loading from PSA to datatarget is slow:
- Check start routines for performance.
- Are enough batch partitions available? Sometimes activation of ODS can be improved by more parallel processes.
- Are you using a lot masterdata-lookups when filling the datatargets?
When you report you findings in this forum we may be able to help you further.

Parallel load of InfoProvider master Data

Hi, I have a Master Data object configured as an infoprovider. I am trying to load the object from 2 different sources in parallel in my process chain. This seemed to work in my dev environement, but one of the loads is failing because of master data lock.
There are no duplicate characteristics between the 2 sources so no conflicts exist there. Is it just that I cannot load 2 sources into the master data infoprovider at the same time?
ThankS!

Hi Kenneth,
On the following (parallel) processes lock situations can occur:
- Hierarchy and attribute change runs is locking temporarily parts of a BW system
- Loading master data for the same InfoObject (risk when loading in parallel master data out of several source systems)
( Can be avoided (if wanted) by applying note 421419)
- Rolling up data of the same InfoCube
- Selective deletion on InfoCube and parallel loading
- Activation or deletion of ODS object data and loading it
Best regards,
Eugene

Load Failure for Master Data object

Dear Sdns,
                    Am doing daily master data loading for VENODR_ATTR master data object.... Am loading it through DELTA Update.... I got an error in Status Tab.
rror message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
The Error Message is : - Update mode R is not supported by the extraction API.The application program for the extraction of the data was called using
update mode R . However, this is not supported by the InfoSource.
Kindly Help me if any of the Snd people might have face this kind of problem...
Answering Getz Appreciated,
Warm Regards,
Aluri

Hi Aluri,
The file might be used or being edited by some other person when you are doing the delta.
CHeck the source system connection @ AWB.activate it.
Follow these steps
1. Activate transfer rules for data source in source system.
2. Activate the ODS
3. Activate the update rules (ods to ods and also ods to cube)
5. Right-click at the ODS, choose 'Generate Export Data Source'
6. Replicate the data source
7.se38---->RS_TRANSTRU_ACTIVATE_ALL for source system .
Then start data loading again.
Hope this helps.
Assign points if useful.
Thanks & Regards,
Bindu

Loading time-dependent master data using update rules/transformations

Hi
I am trying to load time-dependent master data to an infoobject. It seems that I get an error message on duplicate records if I use a transformation or update rule. Does this only work with direct update ?

In the DTP you have the option to ignore duplicate records....
Just select that and then load data...

Load customer text master data error

Hi Experts:
When load customer text master data ,system show the following error message ,could you please
help me to solve the problem , thanks a lot
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.

Delete PSA request from Datasource -> manage
Do a fresh load and Goto to infopackage monitor
Environment --> Short Dump --> in Source System...... Click 'TODAY'
Next screen would show u all Runtime Error... Double click on the first one
from the next screen, u can do analysis by double clicking 'What Happend ?', What can u do? Error Analysis..
By doing this U can find out what exactly is the problem

Please specify Transaction code to load SCM ROUTE MASTER DATA (EWM Routes)

Please specify Transaction code to load SCM ROUTE MASTER DATA (EWM Routes data).
Regards
Dhirendra
Moderator message - Moved to correct forum
Edited by: Rob Burbank on Apr 21, 2009 8:58 AM

Route definition is done at 0VTC. You have define the Route with its description, Transit time, factory calender, carrier info etc. It is stored in TVRO table
Then yoiu will maintain the route determination in 0VRF.
Route Determination:
Dep zone of the shipping point + Destination zone (T-zone) of the ship-to + Transportation group + shipping conditions.
Route determination details are stored in TROLZ table.

Is there any way we can set default value for a Date Attribute to current date in Master Data Services

Is there any way we can set default value for a Date Attribute to current date in Master Data Services.
I as well wants to know that is there any posibility to show Calendar control while input data into respective date attributes.
Thanks.

Hi Anagha,
So far i havent found any way to set todays date by default from MMI, but i guess this flow should work as workaroud
1. Add buisness rule which can set a default value when Date = NULL/Blank
2.get the entity table ,use -select EntityTable from mdm.tblEntity where Name = '<enter entity name>'
3.Go to that table and add a after update trigger like
if uda_<entityid>_<attributeid(Date attribute)> = default value
update uda_<entityid>_<attributeid(Date attribute)> =getdate() where id = <LastUpdatedRow>
I will check on this too from my side.
By the way AFAIK i dont think so calendar control integration is possible .

Conversion of Sales Center (0Plant) from Transactional data to master data.

Hi All,
We have an requirement like this.
Currently in my reports sales center (0Plant) pulling data from tranansactional data.Now due to some problem this transaction data needs to be changed to pull data from master data from 0PLANT attribute of ZOUTNBR will give me the routine to pull data from master data tables.
Regards,
Shivu.

Ans

Meta data,Transaction data and Master data

Hi all,
Could you plz make me clear exactly wht does Meta data,Transaction data and Master data mean and the differences

Hi Ganesh,
<b>MASTER Data</b> is the data that exists in the organization like employee details, material master, customer master, vendor master etc. These are generally created once.
Master data are distributed throughout the company, they are often not standardised and often redundant. As a result it is very costly to offer efficient customer service, keep track of supply chains and make strategic decisions. With SAP Master Data Management (SAP MDM) these important business data from across the company can be brought together, harmonised and made accessible to all staff and business partners. As a key component of SAP NetWeaver, SAP MDM ensures data integrity via all IT systems.
Regardless of the industry, companies often work with different ERP and Legacy systems. The result: the business processes are based on information about customers, partners and products which is displayed in different ways in the systems. If the data are recorded manually, there are more inconsistencies: some data sets are entered several times, others cannot be retrieved by all divisions of the company.
As corporate applications are becoming increasingly complex and produce ever greater amounts of data, the problem is intensified further. Nevertheless, your employees must work with the inconsistent data and make decisions on this basis. The lack of standardised master data easily leads to wrong decisions, which restrict efficiency and threaten customer satisfaction and profitability.
In a word: in order to save costs and ensure your companys success it is necessary to consolidate master data about customers, partners and products, make them available to all employees beyond system boundaries and use attributes valid company-wide for the purpose of description.
<b>TRASNACTION Data</b> - These are the business documents that you create using the master data - Purchase orders, sales orders etc
http://help.sap.com/saphelp_nw2004s/helpdata/en/9d/193e4045796913e10000000a1550b0/content.htm
Regards,
Santosh

Loading data to Master Data fields

Similar Messages

Maybe you are looking for