Loading date issue

Hi Gurus,
For one of our customer 22220065 we have to have documents ready 2 days before the truck picks up the goods.
Therefore the loading date in the order must automatically be moved to
'delivery date - 2'
How can I get this in SAP so we can have goods and documents prepared and shipped the correct way.
Kindly let me know.
Thanks & Regards
Bawa

Bawa,
Loading time isn't really customer specfic. Standard config derives the Loading Time from the Shipping Point/Route/Loading Group combination. As the Shipping Point and Loading Group cannot be controlled at a customer level (unless the customer has a default delivering plant), the only 'standard' way of influencing this time is by the route i.e. having a route for the customer. Then you can assign any one of a number of pick/pack/ship lead time components into it - check out transaction 0VTC. You could alternatively go down the customised path... which is usually filled with pot holes and cracks, but depending on the complexity of the requirements could be achieved.
Cheers,
Paul...

Similar Messages

  • SQL*Loader Date issue

    How do i get sql loader to recognize recognize AM/PM. My control file is below. The error I get is syntax error at line 14. Expecting field-name, found ")".
    OPTIONS ( SKIP=0)
    LOAD DATA
    INFILE '/ftp_data/labor_scheduling/kronos_punch_temp/kronos_punches.csv'
    BADFILE '/ftp_data/labor_scheduling/kronos_punches/kronos_punches.bad'
    DISCARDFILE '/ftp_data/labor_scheduling/kronos_punches/kronos_punches.dsc'
    INTO TABLE "STAFFING"."KRONOS_TEMP_PUNCHES"
    TRUNCATE
    FIELDS TERMINATED BY ','
    OPTIONALLY ENCLOSED BY '"'
    (EMPLOYEE_ID,
    SCHEDULE_DATE DATE "MM/DD/YY",
    PUNCH DATE "MM/DD/YY HH:MI AM"
    )

    Hi Gary,
    Could your problem be with this?
    (EMPLOYEE_ID,You have no data type for that field.
    Regards
    Peter

  • .csv flat file loading data issue

    Environment: SQL Server 2008 R2
    Purpose: Load source data which are stored in a csv file to the destination table
    Problem: After setting up flat file transformation, including the columns in the output alias, see the following picture:
    ,because SSIS set datatype to 50 char while the length is 65. I also set up response string filed to 100 in the destination table, An error message showed as the following picture
    What I could do differently to overcome this issue. please advise

    There are a number of them but not associated with that field
    [SSIS.Pipeline] Warning: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available.  To resolve, run this package as an administrator, or on the system's console.
    1. [Flat File Source [511]] Error: Data conversion failed. The data conversion for column "Version_cd" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
    2. [Flat File Source [511]] Error: The "output column "Version_cd" (604)" failed because truncation occurred, and the truncation row disposition on "output column "Version_cd" (604)" specifies failure on truncation.
    A truncation error occurred on the specified object of the specified component.
    3. [Flat File Source [511]] Error: An error occurred while processing file "C:\Users\data\ETL files\dummydata.csv" on data row 2.
    4. [SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.  The PrimeOutput method on component "Flat File Source" (511) returned error code 0xC0202092.  The component returned a failure code when the pipeline engine called PrimeOutput().
    The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.  There may be error messages posted before this with more information about the failure.
    5. Task Data Flow Task failed

  • Load data issue: Job is longrunning on R1P side

    Hi All,
    We are working in the production system.
    There is one process chain "ZIBWCIMSH" which executes once in a month.This process chain was executed successfully till last month. But in this month the load step in this process chain is not getting completed at all.
    On BW Side, we have information as Transferred 0 records  and added records 0.
    The job is ative in the source system R1P.
    The job runs for more than 40,000 secs on R1P side and job log of the job does not proceed at all.
    Datasource is based on  view "ZZSWV_MBEWH".We checked the contents of the view and there does not seem to be any problem with it. Even we check the extractor in RSA3 but it results with the short dump of TIMEOUT.
    When we are checking this job in SM51 we get following results:
                                                                                    Report / Spool action                                                                               
    SAPLRSA3                                                                               
    Main Program                                                                               
    SBIE0001                                                                               
    Action                    Table                                                                               
    Direct Read               ZZSWV_MBEWH     
    Last SQL statement                                                                               
    SELECT                                                                               
    "MANDT" , "MATNR" , "BWKEY" , "BWTAR" , "LFGJA" , "BUKRS" , "LFMON" , "LBKUM" , "SALK3" , "VPRSV" ,     
       "VERPR" , "STPRS" , "PEINH" , "BKLAS" , "SALKV" , "VKSAL" , "MEINS" , "WAERS" , "BRGEW" , "GEWEI" ,     
       "VOLUM" , "VOLEH"                                                                               
    FROM                                                                               
    "ZZSWV_MBEWH"                                                                               
    WHERE                                                                               
    "MANDT" = ? AND "LFGJA" = ? AND "LFMON" = ?  WITH UR    OPTLEVEL( 5 )    QUERY_DEGREE( 1 )    LOCATION( 
       SAPLRSA3 , 1058 )    SYSTEM( R1P , SAPR3 )                                                                               
    Database                         Number              Time (usec)         Recs.                                                                               
    Direct Read                       121             146.334                   6                             
    Sequential Read                    14            175493                     3                             
    Insert                              1                 501                   1                             
    Update                              3               1.822                   2                             
    Delete                              0                   0                   0                             
    Sources                             0  (Bytes)                                                            
    RSQL                            6.784  (Bytes)                                                            
    Commit                                                  0                                                 
    DB Procedure Calls                  0                   0                                                                               
    There is no change in the status of the job log even after 40,000 secs.  
    Please check the job log below:
                                                                                    Date       Time     Message text                                                                   Message class Message no. Message type                                                                               
    08.07.2008 08:57:33 Job started                                                                         00           516          S       
    08.07.2008 08:57:33 Step 001 started (program SBIE0001, variant &0000000088870, user ID ALEREMOTE)      00           550          S       
    08.07.2008 08:57:33 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)            R3           413          S       
    08.07.2008 08:57:33 DATASOURCE = ZZSWVGE_MBEWH                                                          R3           299          S       
    08.07.2008 08:57:33 *************************************************************************           R8           048          S       
    08.07.2008 08:57:33 *          Current Values for Selected Profile Parameters               *           R8           049          S       
    08.07.2008 08:57:33 *************************************************************************           R8           048          S       
    08.07.2008 08:57:33 * abap/heap_area_nondia......... 4000000000                              *          R8           050          S       
    08.07.2008 08:57:33 * abap/heap_area_total.......... 4001366016                              *          R8           050          S       
    08.07.2008 08:57:33 * abap/heaplimit................ 40000000                                *          R8           050          S       
    08.07.2008 08:57:33 * zcsa/installed_languages...... EUDV                                    *          R8           050          S       
    08.07.2008 08:57:33 * zcsa/system_language.......... E                                       *          R8           050          S       
    08.07.2008 08:57:33 * ztta/max_memreq_MB............ 256                                     *          R8           050          S       
    08.07.2008 08:57:33 * ztta/roll_area................ 6500000                                 *          R8           050          S       
    08.07.2008 08:57:33 * ztta/roll_extension........... 3000000000                              *          R8           050          S       
    08.07.2008 08:57:33 *************************************************************************           R8           048          S                                                                               
    It would be truly great if anybody could provide their valuable input for this problem as this is very urgent.
    Thanks in advance,
    Regards,
    Nilima

    Hi Nilima,
    When running off RSA3, it will use a dialog process while when called from the PC it will be using a background process.  Check the 'abap/time' setting in rz11.
    Moreover, if it took only two hours to process last month, it is improbable that data has increased to such a large extent in a month's time.
    It is possible that new jobs have been added on the R/3 side that runs at this time.
    It may be a good idea to try and run this Process Chain when the R/3 system is lightly loaded. 
    Discuss this with the Basis Team.
    Best Luck!
    Mathew.

  • Master load data issue

    Hi Gurus,
    I was doing full load to 0material. It looks to me  attribute profit center of 0material is wiped out. As per my knowledge if multiple full load jobs are running it should do over write but the attribute value is wiped out. Any clue ?  
    Thansk
    Liza

    Hi Liza,
    Just double check your master object, after activating the master data.
    i think you might have profit center value for material.
    Thanks
    Thota

  • The Game Center is "unable to load data due to network connectivity issues or errors".

    The Game Center is "unable to load data due to network connectivity issues or errors".
    My internet is fine: all other apps that do not rely on the Game Center work, as does my browser and other online functions; additionally, a friend's iPhone connects to his Game Center perfectly while he is sitting next to me.
    Closing the Game Center app and then reopening it is ineffective. Opening the options for the Game Center in the settings, logging out of my Apple ID, then logging back in, and then reopening the Game Center is ineffective. Opening the options for the Game Center in the settings, logging out of my Apple ID, then reopening the Game Center app and logging back in from there is ineffective.
    This issue has gone on for more than a month, and so the phone has gone through all variations of "turn it off then back on again, refresh the system, etc etc" that are the basic first suggestions for trouble shooting.
    One game app, which required a Game Center profile to launch, stopped working entirely, and would return a message saying something like "connect to the Game Center". I eventually deleted it to free up space. Other games which can be linked to the Game Center to connect with friends simply fail to link, returning "Game Center unavailable". This is the aspect that is currently bothering me the most: I cannot play games with friends unless the app can also link to Facebook and connect to friends from there.
    When I open the Game Center, I see the following screen. The bubbles float gently, and it seems as if I had the ability to update my "status". However doing so results in a message that has vanished once the app is reopened.
    Upon tapping Games, either the bubble from the main screen or the option on the ribbon at the bottom, the following screen appears. Clicking on Challenges shows a message that achievements must be viewed to issue a challenge. Clicking achievements results in a message that games must be connected (and from my friend's phone I know I have several apps that should appear).
    Upon tapping friends, it does show me a list of suggested friends pulled from Facebook, but attempting to send a friend request results in the following screen. After accepting the error box, the "send" button for the request is grayed out and unavailable regardless of adding or deleting friends and/or an accompanying message.
    In short, the Game Center is completely unresponsive for no discernible reason, and this problem began with no warning and is now long term. Though my iPhone is older (a 4s), my friend's is even older (a regular 4) and works fine.

    I am having the very same problem on my iPad running ios 7. All is fine on my iPhone it opens no problem - this is running on ios 8. I wish they would fix it.

  • When connected to my Ford Mondeo, my ipod nano can be controlled through interface.  But after while it comes up with message 'loading data' and then freezes.  Anyone else got the issue?

    When connected to my new Ford Mondeo, my ipod nano can be controlled through user interface in car.  This worksd most of the time, but after a while if I try to change the music or search, it comes up with message 'Loading Data'.  I then have to pull out USB and reinseert, at which point it works again.  Has anyone esle expereinced this/have a solution?

    Does not matter if anyone else has this issue.  You need to contact the Ford dealership.  It's their product you are having problems with. 
    If you really want to know if anyone else has this issue, post on Ford's Mondeo message boards.  It's where the Ford car owners hang out.

  • ITunes was unable to load data class information from Sync Services Issue

    Hi,
    Whenever I connect my iPhone 5 to my laptop (running Windows 7) I get 'iTunes was unable to load data class information from Sync Services. Reconnect or try again later'.
    Now I've had a look at all of the various Apple troubleshooting advice (and many threads on the discussion boards) for this and none of it works. I've also spent the best part of three hours tonight trying to remove iTunes completely off of my laptop using various programmes to try and remove all the little bits it leaves behind, but again to no avail.
    I've been having this issue for quite a while now and it first started occuring with my iPhone 4, so when the same issue occured with my 5, I figured it was an iTunes issue or something related instead of just a phone error.
    I decided that I wanted to sort it now as the last two iPhone software updates have errored and I've had to restore my phone and the back-ups have failed on both occasions so it's becomming quite a tiresome process now.
    Any other suggestions would be really useful as I'm starting to think I'm just going to have to start over with my laptop, which I'd rather not do as that would take forever!
    Cheers

    Sorry, I should have also said that I'm running the most recent iTunes software and that I can still actually sync my phone with iTunes.

  • Issue to load data from database to XML file. error: ODI-40768

    Hi,
    While I am trying to load data from database to XML following error is appearing.
    ODI-1228: Task TEST_XML_DATA (Integration) fails on the target XML connection MyLOCALXSD.
    Caused By: java.sql.SQLException: ODI-40768: Could not save the file <default>:C:\DATA_FILE\www.xml because a class java.io.IOException occurred and said: The filename, directory name, or volume label syntax is incorrect
         at com.sunopsis.jdbc.driver.xml.SnpsXmlFile.writeToFile(SnpsXmlFile.java:751)
         at com.sunopsis.jdbc.driver.xml.SnpsXmlConnection.internalExecute(SnpsXmlConnection.java:769)
         at com.sunopsis.jdbc.driver.xml.SnpsXmlPreparedStatement.execute(SnpsXmlPreparedStatement.java:46)
         at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:166)
         at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
         at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
         at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
         at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
         at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
         at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
         at java.lang.Thread.run(Thread.java:662)
    jdbc url: jdbc:snps:xml?d=C:\test_xsd.xsd&s=TESTSQL&re=employeesX&ro=true
    physical schema: TESTSQL
    Knowledge modules are:
    LKM: LKM SQL to SQL
    IKM: IKM XML Control Append
    CKM: CKM SQL
    Parameters set are:
    CREATE_XML_FILE: true
    XML_PATH:<default>:C:\DATA_FILE\www.xml
    I have tried to change the directory path but error is still there.
    Could some one please help me to resolve the issue?
    Regards,
    user1672911

    Hi,
    The trouble in "<default>:"  - if you set XML_PATH as C:\DATA_FILE\www.xml instead  <default>:C:\DATA_FILE\www.xml- it will work correctly.
    Greetings,
    Eugene

  • Sales Order Loading Date and Goods Issue Date

    I am getting confused with specific sales orders in our system which have a loading date of 5.11.2008 00:00 and a goods issue of 6.11.2008 00:00, this would imply a loading time of 1 day, I would think. However in our system I look at the shipping point I see default from shipping point is 2 work days. Is there something I am missing or other setting I am not aware of?

    What is the delivery scheduling type you are using for the sales document type? If you are using A change it to X. Also check the loading times.
    Regards,
    GSL.

  • Purchase order delivery shedule tabl , no Good issue date, loading date.?

    Hi Experts
      We found some Purchase order, in po item, it is without goods issue date, loading date and so on.
    Material has set ATP check on mrp3. what's possbile wrong? something wrong for matieral setup or others?
    Thanks
    Alice

    Hi
    Really thanks for your help. You mentioned " SD delivery of the sending plant is created and processed."
    Do you mean in material master , the sales view -delivery plant will impact this po GI date and Loading date? It maybe something wrong?
    Thanks
    Alice

  • Why the delivery date is the same date as 'transptn plan date" & loading date' & ' good issue' & GR end date'

    Hi Experts,
    why the delivery date is the same date as ‘transptn plan date” & loading date’ & ‘ good issue’ & GR end date’.
    in shipping tab i can see Planned Deliv. Time  170 Days ... wat could be the reason.
    Many Thanks:
    Raj Kashyap

    Hi Jurgen,,
    Thanks for quick reply!!
    But i didnot find any things like that .. what could be the customizing .. and we are using GATP from APO side.
    \Raj Kashyap

  • Planning Good Issue date and loading date

    Hi All,
    How I can get the planning Good issue date? I found that the loading date is the same as the planned Good issue date, what's the loading time?
    As what I understanding, loading date + loading time = Good issue date,  But I am not sure how to calculate the planned Good issue date.
    thanks,

    Hello Friend,
    It is determined in Shipping Point configuration.The path is as follows SPRO--> Enterprise Structure >Definition>Logistics Execution-->Define, copy, delete, check shipping point and go in detail the concerned shipping point.

  • STPO's  -- load date , goods issue, transport is not appear

    Hi Guru's
    I'm received one case, while creating the STPO's (Different company codes) in items details -> Del.sch-> transport, load date and goods issue is not appear. The Delivery date is 25.02.2008.  next day the user as change the del.date from 25th to 26th.  transport,load date and goods issue is appear.
    Anybody plz tell me how its happen like this, and tell the root cause.
    Regards
    chandru.

    Hi Nilima,
    When running off RSA3, it will use a dialog process while when called from the PC it will be using a background process.  Check the 'abap/time' setting in rz11.
    Moreover, if it took only two hours to process last month, it is improbable that data has increased to such a large extent in a month's time.
    It is possible that new jobs have been added on the R/3 side that runs at this time.
    It may be a good idea to try and run this Process Chain when the R/3 system is lightly loaded. 
    Discuss this with the Basis Team.
    Best Luck!
    Mathew.

  • Special character issue while loading data from SAP HR through VDS

    Hello,
    We have a special character issue, while loading data from SAP HR to IdM, using a VDS and following the standard documentation: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e09fa547-f7c9-2b10-3d9e-da93fd15dca1?quicklink=index&overridelayout=true
    French accent like (é,à,è,ù), are correctly loaded but Turkish special ones (like : Ş, İ, ł ) are transformed into u201C#u201D in Idm.
    The question is : does someone know any special setting to do in the VDS or in IdM for special characters to solve this issue??
    Our SAP HR version is ECC6.0 (ABA/BASIS7.0 SP21, SAP_HR6.0 SP54) and we are using a VDS 7.1 SP5 and SAP NW IdM 7.1 SP5 Patch1 on oracle 10.2.
    Thanks

    We are importing directly to the HR staging area, using the transactions/programs "HRLDAP_MAP", "LDAP" and "/RPLDAP_EXTRACT", then we have a job which extract data from the staging area to a CSV file.
    So before the import, the character appears correctly in SAP HR, but by the time it comes through the VDS to the IDM's temporary table, it becomes "#".
    Yes, our data is coming from a Unicode system.
    So, could it be a java parameter to change / add in the VDS??
    Regards.

Maybe you are looking for