Loading Flash Paper swf causes all other button events to fail

Hi Everyone,
I have created a project with Flash which I am using Zinc to publish as a projector for both Macs and Pcs. Now, in this app I am loading a pdf document converted to a Flash Paper swf. The moment I load this swf file into my project, it appears as though all other button events fail. If I remove the code which loads in the flash paper swf, all buttons function as expected.
Can anyone please help me with a reason / solution for this?
Any help is greatly appreciated!
Cheers!

Did that and there were no errors shown at any point, such as when publishing the .apk file.
I found a solution. I was under the impression I needed to use touch events for it to work on a tablet, and changing those to normal mouse events solved the problem. Still not sure why it wouldn't work the other way, but for now it works as needed.
Thanks!

Similar Messages

  • ★URGENT★ BLACKBERRY TORCH KEYBOARD TRACKPAD AND ALL OTHER BUTTONS NOT WORKING 9810

    MY BLACKBERRY TORCH 9810 KEYBOARD AND CALL,ETC BUTTONS STOPPED WORKING.
    My blackberry got ink at the top of the phone so I got a lightly wet tissue and cleaned the top part of the phone after I finished cleaning it, I recognised the keyboard stopped working. The touch screen still works but the physical keyboard and all other buttons have stopped working. Please help me, I really ened that phone for emergency uses, etc. I do not want to restore my phone so do not suggest that solution.
    UPDATE: Right now I have my phone inside a bowl of uncooked rice. 
    UPDATE 2: 30 minutes later, I took the phone and rebooted it the keyboard still does NOT work but the trackpad can move up and down but when pressing it does nothing.
    PLEASE HELP NEED URGENT HELP.

    Hi and Welcome to the Community!
    30 minutes is not enough...follow EXACTLY the instructions in this FAQ:
    http://www.blackberryfaq.com/index.php/Got_Your_BlackBerry_Wet%3F
    Also, prepare yourself for the worst...the only thing that is predictable about moisture intrusion into a BB is that the results will be unpredictable. Since you have already re-applied power to the BB too soon, it is much more likely that you have totally fried something inside.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Loaded flash 8 swf's instance problem !

    Hi,
    I am loading a Flash 8 .swf file in Flex 3. Initially its
    working fine.
    But whenever we tried to load a another instance of that swf
    or trying to load in a separate container again, its producing
    wrong output with colors and mouse events.
    We tried with the same swf file making two different file
    (map1.swf, map2.swf), and loading them separately. But its also
    buggy.
    The MovieClip structure of one swf (map1.swf) in flash is
    like - _level0.Map.Map.NA.
    We made one swf 's (map2.swf) structure to test like -
    _level0.Map2.Map.NA
    Where colours of 'NA' instances are depending on xml and
    mouse event applied to them.
    If we load them in Flex 3 and trace out the loaded swf
    instances, whichever swf loaded first, flex started to use those
    instances everywhere.
    e.g. If map2.swf loaded first and map1.swf second, then Flex
    debug console shows -
    '_root.Map2.Map.NA' - for map2.swf and
    '_level0.diff_map_load0.pan2.contentPane.UIComponent33.instance37.instance67.Map2.Map.NA'
    - for map1.swf.
    Again, If map1.swf loaded first and map2.swf second, then
    Flex debug console shows -
    '_root.Map.Map.NA' - for map1.swf and
    '_level0.diff_map_load0.pan2.contentPane.UIComponent33.instance37.instance67.Map.Map.NA'
    - for map1.swf
    For both of the cases which one is loaded first, working
    correctly and the second one producing wrong results with colors
    and mouse events.
    Help and Suggestions needed.
    Thanks,
    Debasish Bouri.

    Authorware is old. EOD'd, in fact now.
    It's native support only officially handles Flash 6. Flash 7
    usually
    works fine if nothing 'fancy' (i.e. new components) has been
    added to
    the SWF. Flash 8 and above, however, pretty much aren't going
    to work at
    all in Authorware *using the native sprite*.
    However, if you add the Shockwave Flash ActiveX control to
    your
    flowline, that uses the same control as IE does. So as long
    as your user
    has the Flash IE player on their machine, you can load
    whatever SWF
    version that player supports.
    Working with the ActiveX control is a bit more tricky. Check
    the ActiveX
    example in your Authorware 7\ShowMe directory for an
    example...
    The biggest downside to the ActiveX approach is those SWFs
    are 'always
    on top'. Makes for good playback but you can't layer anything
    on top of
    those SWFs unfortunately (except maybe other ActiveX
    controls, which
    causes lots of flickering).
    HTH
    Erik
    Jacks007 wrote:
    > Hi All,
    > I've been creating SWF's in Flash v6 (I think it was v6)
    and they worked fine
    > in AW 7. I now have Studio 8 and can't get them to open
    in AW7 without saving
    > as the earlier version. Does anyone know why it does not
    work or if AW needs
    > an update to get the Flash 8's to work in AW as a
    Version 8 SWF?
    >

  • Loading flash 8 SWF in adobe AIR, loses the stage width in flash 8 SWF

    Currently i am using a CS3 IDE to compile AIR application.I
    am trying to load the flash 8 SWF inside my AIR application.After
    loading the SWF, when i try to trace the stage width inside the
    flash 8 SWF , it says undefined.Not sure why..
    Googling few hours not able to get the solution.
    Please help me on this, urgently needed.
    Thanks in advance

    This is a fairly common question on these forums. Basically,
    AS2 and AS3(Flex/AIR) can't communicate directly. You will either
    need to use LocalConnection or use ExternalInterface and javascript
    to pass info between the 2.

  • Problem loading flash 5 swf in flash 8

    The problem is this:
    I am trying to load a flash 5 swf movie using the loadMovie
    function.
    The problem is that it loads on my computer, but it doesn't
    on the client's computer! I have Flash Player 8. Could this be a
    problem? Could it be that he's having an older version of Flash
    player? I asked him and he didn't answer me yet. So I'm also asking
    you...
    Do you know what the problem might be???
    Here's the code...
    loadMovie("game.swf", "gameHolder_mc");
    right, not that complicated! :) I can't see why it would work
    on ONE computer and NOT WORK on ANOTHER.
    Please, can someone help me?
    Thanks

    if that code works for a flash 8 player it will work for a
    flash5 player or later. however, there may be other code in the
    flash 8 swf that might not work for an older player.

  • 1 SWF works all other 3 do not in IE

    Folks,
    This is my first time posting here and I can not seem to find
    an issue to this problem...
    Ok, I have a website that the main page has a flash header
    that works just fine in both IE & FireFox; below that on the
    body I have 3 small flash movies with just rotating images;
    everything works just fine in FireFox; but in IE the bottom 3 do
    not work or even show... But here is the funny part... if I start a
    new page test.html and add the 3 movies in there using DW CS3 and
    run it on it's own; then they work in both IE & FireFox... then
    if I copy that code that works into the full page... the 3 stop
    working in IE...
    my flash code:
    <script type="text/javascript">
    AC_FL_RunContent( 'codebase','
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','170','height','222','src','flash/flash_1','quality','high','pluginspage','http://www. adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movie','flash/f lash_1'
    ); //end AC code
    </script>
    <noscript>
    <object
    classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0"
    width="170" height="222">
    <param name="movie" value="flash/flash_1.swf" />
    <param name="quality" value="high" />
    <embed src="flash/flash_1.swf" quality="high"
    pluginspage="
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
    type="application/x-shockwave-flash" width="170"
    height="222"></embed>
    </object>
    </noscript>
    Please Help... I'm out of ideas here??? I have tried this
    with & without AC_FL_RunContent(
    Thanks
    Mykl

    Jim,
    Yes without center it works fine on every browser I have
    tested... Another thing I found out since my last message is that 1
    single center works fine... but the second you have sub centers it
    stops working in IE7...
    I know there is a hand full of ways to accomplish this; but
    here are some examples I used:
    <table width="800" border="0" cellspacing="0"
    cellpadding="0">
    <tr>
    <td>header here... </td>
    </tr>
    <tr>
    <td>
    <div align="center">
    flash movie
          flash movie
          flash movie
    </div>
    </td>
    </tr>
    </table>
    The above works... which is what I am using now...
    But, initially I was doing something like this, which does
    not work...
    <table width="800" border="0" cellspacing="0"
    cellpadding="0">
    <tr>
    <td>header here... </td>
    </tr>
    <tr>
    <td align="center">
    <div align="center">
    <table width="80%" border="0" cellspacing="0"
    cellpadding="0">
    <tr>
    <td><div align="center">flash
    movie</div></td>
    <td><div align="center">flash
    movie</div></td>
    <td><div align="center">flash
    movie</div></td>
    </tr>
    </table>
    </div>
    </td>
    </tr>
    </table>
    Seems like any time you add sub levels of alignment is stops
    working in IE7... I know that instead of the div I could just use
    table align center but it's flexible...
    Thanks
    Mykl

  • When using mail icon i get a blank screen with No message selected on the RH side. Top left is the word thread in  black . all other buttons are greyed out except the send new mail one. Cna anyone help?

    Email does not appear when using the mail icon on the home screen. I get No message selected showing on the rh side of my screen with the left hand third of the screen blank. Buttons on the top line are greyed out except the new mail one. The word thread appears in black on the top left hand side of the screen The only way out is to close the screen. all other apps work okay.

    Hello calverone,
    Thanks for using Apple Support Communities.
    To start troubleshooting this issue where the Mail application is not appearing correctly on your iPad, I'd like you to please force the Mail app to quit, and then restart your iPad.
    iOS: Force an app to close
    Turn your iOS device off and on (restart) and reset
    Have a great weekend,
    Alex H.

  • In my Itunes page the add play list and all other buttons are missing

    In my Itunes the add play list button and all others at the buttom of the page are not visiable hos anyone else run into this problem?

    Hi kirsty1211,
    If you are having issues downloading your purchases to your laptop, you may find the following articles helpful:
    Apple Support: Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    iTunes Store: Troubleshooting iTunes Match
    http://support.apple.com/kb/ts4054
    Regards,
    - Brenden

  • Can't load flash panorama swf

    I have a swf you can see here http://www.jimslounge.com/graff.swf
    the following code loads other swf's just fine but not this one it just doesn't load no error message.
    this.createEmptyMovieClip("mcHolder", this.getNextHighestDepth());
    var oListener:Object = new Object();
    oListener.onLoadInit = function(mcContent:MovieClip):Void {
    //    mcContent._xscale = 10;
    //    mcContent._yscale = 10;
    var mclLoader:MovieClipLoader = new MovieClipLoader();
    mclLoader.loadClip("graff.swf", mcHolder);
    mclLoader.addListener(oListener);

    I found sometning that worked at this site.
    var vr:MovieClip = _root.createEmptyMovieClip("vr", 1);
    vr._lockroot=true;
    // move the upper left corner
    vr._x=100;
    vr._y=200;
    var myLoader = new MovieClipLoader();
    var myListener = new Object();
    myListener.onLoadStart = function () {
    // Set the dimensions and position of the pano
      vr.window_width=500;
      vr.window_height=380;
      vr.window_x=100;
      vr.window_y=10;
    myListener.onLoadInit = function () {
      // your initalisation of the pano, add Hotspots,...
      // You can also set the window size here but you need to use the API
      vr.pano.setWindowSize(500,380);
    myLoader.addListener(myListener);
    myLoader.loadClip("graff.swf", vr);
    //loadMovie("graff.swf", "mySquare");

  • Flash player works on all other browsers besides Safari (6.1). OS is still mountain lion, any suggestions?

    Ever since I updated to Safari 6.1, nothing using flash works. It is up to date and will work on all other web browsers.

    Open System Preferences > Flash Player then select the Advanced tab.
    Click Delete All under Browsing Data and Settings
    Not empty the Safari cache.
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now click Develop from the menu bar. From the drop down menu click Empty Caches.
    Now try a video.

  • Add crash on one client and cause all other SAP clients to freeze

    Hi All
    I have a big problem that I hope someone might help solve...
    We have a customer adding 2000 invoices in 100-300 batches using a Add-on we have created.
    Our add-on does what it is suppose to do, but at random intervals (more when many users are working), the add-on freeze (it does not crash with an error despite we have try/catch all over... Instead the addon goes down to use zero in CPU and nothing is added to the database)... This is a big problem since the add-on use transactions and if the "crash" happens within a transaction all other clients freeze (not able to do anything).... if the add-on process is killed all client "wakes up"...
    The customer is running SBO2007A PL42 and have a 27GB database with around 15 simultanious users
    Anyone:
    - Who have experience somthing similar?
    - Know any solutions / partial solution?
    Kind Regards
    Rasmus Wulff Jensen

    I just upgraded to 2007A PL42 and SQL2005 last week. Since then I've had the same issue, continuous locks on the tables. I use the DIAPI extensivly. If one person is using the system then I have no problems. Once additional users login the application freezes and nothing works.
    I see that locks are created on the entire tables; you'll notice extensive "lock escallation" ocurring in profiler. Once the table is locked and another related table becomes locked by another process then you have infinite wait periods to release locks.
    Even though you are updating Invoices, SBO still updates the OITM tables with the IsCommited, Inventory, etc values. The OCRD and many other tables are also affected.
    The same application that I'm using ran perfectly in 2005A SQL 2000. I don't know whether this is a SQL2005 or SAP (or both) issue at this point.
    My only work around has been to restart the SQL service and tell everyone to use our application one at a time. I hope that we can find some answers soon.
    It may have something to do with the DI API COM Add/Modify calls throwing errors and leaving open locks.

  • All other buttons on the my internet banking is working except the log on button

    Macbook Pro 13-inch Mid 2012 (Newly bought 5-6 months)
    Porcessor 2.5 GHZ İntel Core i5
    Memory 4 GB 1600 MHz DDR3
    472.55GB free of 498.88 GB
    OS X Yosemite Version 10.10.1
    I use my Macbook Pro to do internet Banking. İn the internet Banking(HSBC Turkey) there is a LOG ON botton. That botton use to work before I upgraded to Yosemite, now it doesn't work but all other botton on the my internet banking is working except the log on botton. The weirdest thing is that if I log out to my Admin user and change to Guest User, then go to my internet banking site, the  LOG ON botton is working without any problem.
    One more thing, ever since I upgraded to Yosemite, when I turn off my MacBook Pro and turn on again, it start up very slow, is shows a counter while staring up, granting that I only used around 26-28 GB on the storage it should starts up without any delay.
    Please help me!
    Thanks,
    Arnel
    <Re-Titled By Host>

    Regarding the internet banking site log on, I had a very similar problem with a different internet bank. It was resolved by Safari Menu > Clear History and Website data.

  • PrePrint event scope affects all other print events?

    A PDF requirement is to have one document print in different versions for different recipients -- e.g., court, DA, public defender ..
    They aren't all allowed to see the same data on people in the system, and in one instance, the form must be secured as read only.
    Sure, there are a few different ways to do this, but the workflow chosen was to complete a PDF form, and then intercept the print or email functions to hide and secure pages.
    The people who fill out the form need the entire document.
    My approach was to offer a standard print button from the tool palette. No problem.
    Then I added another print button from the tool palette, and set the pre-print and post-print events to intercept and change the number of pages output (leaving out pp 4-6). Works fine.
    form1.page1.btnPrintLimited::prePrint - (JavaScript, client)
        TextField1.rawValue = "Secure prePrint";
        page4.presence = "hidden";
        page5.presence = "hidden";
        page6.presence = "hidden";
    Then, returning to the standard print button, it seems that now all jobs are rendered with the same pages missing as were defined in the pre-print and post-print events for the OTHER button.
    What gives? I thought that the scope for control events would be limited  to those events themselves.
    I even tried in the pre-print and click events for the standard report to force the visibility of pages suppressed in the events, e.g.,
    form1.page1.btnPrintNormal::click - (JavaScript, client)
        page4.presence = "visible";
        page5.presence = "visible";
        page6.presence = "visible";
    xfa.host.print(1, "0", (xfa.host.numPages -1).toString(), 0, 0, 0, 0, 0);
    Is my approach a faulty one? Should I be trying something else?
    I'm using LC Designer ES2.
    Would appreciate any guidance.
    Kind regards,
    Brian

    Hi Brian,
    There are three classes or groupings of events:
    Process events.
    Interactive events
    Application events
    See a table and example form here: http://assure.ly/nB0Bvz. Also have a look at this example, as it shows you how often some process and application events fire: http://bit.ly/gW3RNr.
    Okay, so interactive events like mouseEnter and click are restricted to the object that contains the script.
    However process and application (including prePrint and postPrint) fire for all objects that contain script in those objects.
    I hope the examples clear that up for you.
    I think you might have to consider a role based approach to the form. So for example if you can determine who is looking at the form, then using an if/else statement, print the appropriate pages.
    Good luck,
    Niall

  • Flash paper swf

    I have used Adobe Fash Paper to convert Word and Excel files
    to sfw files. Next I insert these swf files as animation into
    Captivate (both versions). Sometimes this works fine and other
    times i get three or four rapidly flashing green boxes at the top
    of the inserted animation and I cannot access the document. Other
    times it works just fine. When all is working it is quite a nice
    way to attach Word or Excel documents to a Captivate file without
    linking.
    Does anyone know how I can make this work all the time?
    Many thanks

    Hi folks,
    Further to my last post, here is a workaround that prevents
    the FP document from being resized.
    1. Create a Captivate project with a single slide and insert
    the FP document as an animation so that it covers the entire slide
    2. Make sure that both in the animation dialog and also the
    Project Preferences all transitions are switched off and that the
    loading screen option (Project preferences) is also disabled.
    3. Publish the FP document as a SWF
    4. Open the project file you want to add the FP document to
    5. Insert the publshed Captivate project containing the FP
    doc as an animation
    6. Again make sure that the transitions menu is set to No
    transition.
    7. Publish your new Captivate project.
    Again I have provided a working copy which you can see by
    clicking on this
    click
    here
    Just one other point, the Print button still does not work in
    this example. I will post again if I manage to get this working.
    Regards,
    Mark

  • Flash paper, .swf  & loadMovie...

    This may look like a riddle, but I can assure you I'm not
    being clever. here is my problem.
    this.createEmptyMovieClip("test",1);
    test.loadMovie("
    http://somelocalwebpath/folder/flashpaper.swf");
    1) It works when "flashpaper.swf" is non_flashpaper.swf (both
    are relevent paths)
    2) It doesn't work when "flashpaper.swf" is
    another_flashpaper_doc.swf (another flashpaper doc)
    3) It works when "flashpaper.swf" is "image.jpg"
    4) It works when the I use a UNC path instead of a URL, but
    not on anybody elses machine. (because it can't access the file w/o
    http or access permissions)
    5) I checked for size, filetype, corruption, yadayadayada.
    What happens:
    When it works, it loads the .swf like usual.
    When it fails, it loads the initial flashpaper loading
    screen, crashes flash player, and flash.exe.
    I think the flashpaper .swf does some sort of work that
    requires pathing around, which fails cross-server using "
    http://..." but works using the direct server
    link (if user permissions allow, of course).
    I can force this to work using user permissions and direct
    paths, but what I'd like most is for someone to shed some light on
    what flashpaper does, and how I can work with it.
    HELP!!!

    Hi folks,
    Further to my last post, here is a workaround that prevents
    the FP document from being resized.
    1. Create a Captivate project with a single slide and insert
    the FP document as an animation so that it covers the entire slide
    2. Make sure that both in the animation dialog and also the
    Project Preferences all transitions are switched off and that the
    loading screen option (Project preferences) is also disabled.
    3. Publish the FP document as a SWF
    4. Open the project file you want to add the FP document to
    5. Insert the publshed Captivate project containing the FP
    doc as an animation
    6. Again make sure that the transitions menu is set to No
    transition.
    7. Publish your new Captivate project.
    Again I have provided a working copy which you can see by
    clicking on this
    click
    here
    Just one other point, the Print button still does not work in
    this example. I will post again if I manage to get this working.
    Regards,
    Mark

Maybe you are looking for