Local currency showing higher value in BW compared to ERP - Sales report

Hi,
My sales report is showing higher value in BW report compared to ERP e.g
the report is showing 567,01 and in ERP it is showing 566,94.
is there a way I can resolve this in the query.
thanks

Hi  Bhat,
there may be lot many factors like
1)comparision between the Two i.e ERP and BIW.Are the Factors same.
2)Have u  Deltas captured properly.
3)have u missed any deltas any day.
4)Any order that has been modified .
5)hope u have considered ONE days Lag between BIW and ERP.
6)To what is ur 0Recordmode mapped to.
7)Is it because of Rounding OFF Values.
Rgds
SVU

Similar Messages

  • Amount in local currency showing different value

    Hi,
    I have one issue where document currency and local currency are same(USD).
    After posting the customer document in USD say 1000.00, when i goto FBL5N to check the open items the report is showing the difference of 0.44 (1000.44) in Amount in Local Currency column.
    I received payment of 1000.00 usd from the customer.
    At the time of clearing the system showing 0.44 difference.
    Please guide me how to resolve this issue.
    Regards,
    Krishna Kishore

    Hi,
    Not yet. Temporarily i am charging off this difference to expense account.
    Regards,
    Krishna Kishore

  • Values are not getting updated in sales report

    I have configured sales information system, and i have been trying to run sales report but values are not getting updated in sales report, System will through message that no data exists.
    regards,
    thooyavan

    Hi,
    Please check with the Customer and Material Statistics group in the Customer and material master respectively.
    Further check with the LIS settings (Sales Area combination with the Update group).
    Reward points if this helps you.
    Regards,
    Harsh

  • Local Currency COP, KRW values wrong in report

    I have the following problem. Any values in local currency COP (Columbian Pesos) or KRW (Korean Won) comes in a report 100 times in value. For example if the value in the infocube is 1950  COP, in the report it shows as 195,000 COP. This happens only for currencies COP, KRW. For all other currencies the value in the cube and report are same. This is happening in AR cube, AP cube, Inventory cube.
    How to correct and is there any setting to be done for this.
    Please note that i am not using any currency conversion. I am just reporting in local currency .
    Ram

    Hi Ram,
    It should be a bug.
    The situation is the following.
    For example, you load amount in COP (KRW) = 12345. Since default number of decimal places for amounts with currency is 2, the system keeps amount loaded as 12345,00 (with 2 decimals).
    There is a special table TCURX which lists currencies with number of decimals not equal to 2 (you can also access or set values in this table through SPRO -> SAP Netweaver -> General settings -> Currencies -> Set decimal places for currencies).
    I beleive you can find KRW & COP in the mentioned above table with number of decimals not set (zero).
    During query result generation the system apply the real number of decimals from TCURX table and 12345,00 is treated as amount without decimals (coma simply ignored). That gives 1234500 amount. The same amount in TND (with 3 decimals) becomes 1234,500 etc.
    There are plenty of OSS notes about this bug, for example, # 760195. Not sure which one to implement. You’d better contact SAP Support.
    As a workaround I can suggest either delete KWR & COP from TCURX table or use amounts without currency or as number (with a separate 0CURRENCY field going into the cube).
    Best regards,
    Eugene

  • Costing shows high value due to BOM alternative material

    Hi,
    In BOM we have maintained alternative material for few line items.(not maintained alternative BOM) When we do the standard cost run system is taking main material and alternative material value. so the cost of the product is showing high.
    How system will behave this situation when doing standard cost estimate? how to avoid this excess value due to adding the alternative material?

    Dear Govindaraj,
    If there are alternative items maintained in the BOM,then as per the usage probability defined for each
    item the cost will be taken.
    say for one item if its 60% and for the another if its 40% means accordingly the cost gets captured.
    So goto CS03,say Items X and Y are defined under alt.item group A1,now select the first item(row) X
    and click on item details and check under Basic tab page you will be able to see the alt.item group
    along with priority,strategy and usage probability.
    So in CK11N or CK40N,it will be showing as 6 ea and 4 ea along with their prices for costing part.
    So as per to the usage prob it picksup for the costing part.
    Check and revert back.,
    Regards
    Mangalraj.S

  • Bytes in execution plans shows high value in oracle 11.2.0.3 than 10.2.0.4

    Hi,
    I copied data from 10.2.0.4 database to 11.2.0.3, gathered stats similar to 10.2.0.4 database and running same query against both database.
    Bytes shows 257 in 10.2.0.4 and 2263 in 11.2.0.3. Both plans are using index access. Can someone help me why I see this discrepancy?
    Thank You
    Sarayu
    select * from TABLE_1 where column_1 = 12345
    Oracle 10.2.0.4
    Execution Plan
    | Id  | Operation                   | Name          | Rows  | Bytes | Cost (%CPU)|
    |   0 | SELECT STATEMENT            |               |     1 |   257 |     3   (0)|
    |   1 |  TABLE ACCESS BY INDEX ROWID| TABLE_1       |     1 |   257 |     3   (0)|
    |*  2 |   INDEX UNIQUE SCAN         | IDX_TABLE_1   |     1 |       |     2   (0)|
    ----------------------------------------------------------------------------------Oracle 11.2.0.3
    | Id  | Operation                   | Name          | Rows  | Bytes | Cost (%CPU)| Time     |
    |   0 | SELECT STATEMENT            |               |     1 |  2263 |     3   (0)| 00:00:01 |
    |   1 |  TABLE ACCESS BY INDEX ROWID| TABLE_1       |     1 |  2263 |     3   (0)| 00:00:01 |
    |*  2 |   INDEX UNIQUE SCAN         | IDX_TABLE_1   |     1 |       |     2   (0)| 00:00:01 |
    ---------------------------------------------------------------------------------------------Edited by: user13312943 on Oct 15, 2012 8:35 AM

    That would seem to imply that the 11.2.0.3 database expects one row of the table to occupy 2263 bytes while the 10.2.0.4 database expects one row of the table to occupy 257 bytes. Which estimate is closer to the correct value? How much space does the table occupy in each database? How many rows are in each database?
    Justin

  • Show selected value from multi-selected parameter in crystal report

    Dear Experts!
         i would like to ask how to catch selected value from multi-selected parameter to show in report header section.
    Thanks in advance.

    Hi Dara,
    If this is a string prompt then you could simply create a formula with this code and place it on the report header:
    Join({?Prompt name},", ")
    -Abhilash

  • Showing Zero values in columns and rows in BW report

    Hi,
    the BW report is showing all rows and columns all Zero's..... so what does it mean till target the data is fine but in the report it  is showing 'zero' in all fields.... so let me know the reason...
    Regards
    vishali

    Can you please check the Key figures value? Is it Zero or as per the selection/filter the values are coming "Zero".

  • WEBI Report values Double as compared to BI/BEX Report.........

    Hi,
    I am trying a report in BOBJ. When I run the WEBI report it doubles the Column values as compared to BI report. There are no filters, conditions or anything in the report. Tried purging the data and running the report but no change. has anyone come across this situation and if so how did you resolve it? Please let me know.
    Thanks...... ShruMaa

    Hello Shruti,
    as you refer to a Webi problem I recommend to post this query to the [BusinessObjects Web Intelligence|SAP BusinessObjects Web Intelligence; forum.
    This forum is dedicated to topics related to the creation and design of Web Intelligence documents using the Web Intelligence Report Panels. This includes areas such as universe connectivity, prompts, charting, formatting, filters, and formulas.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all Webi queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • Do not show the # values should be replaced with blank at report

    Dear All,
    There is a requirement do not show the null (#) values at report level for characterstics fro example for onedocument there is no notification type in report for that document it is coming with null value but i do not want that null value in report it should be blank
    any suggestions  please,mostly provide the information at report level,but at cube level any options at the time loading( through start routine)
    Thanks & Regards
    sathish

    Hi Satish,
      There is one tcode where u can keep ur symbol defined say blank  to show in report when null values occur... i didnt rememeber tcode i will tell you as soon i get it....
    but it will effect not only this query but all the queries so it is upto u....
    and at cube level u can write a routine to check ...
    if  this field value is initial .
       change it with blank
    else
      leave it.
    hope it helps...
    regards
    vamsi
    Edited by: vamsi talluri on Mar 15, 2009 10:33 PM

  • GR/IR clearing value in local currency

    Hi All,
    I have a service PO (Item cat D) in which the vendor and local currency is same as USD.
    when I see PO history, the amount of SES and GR (101) is shown as 0 (ZERO) in  "GR/IR clearing value in local currency" colunm, however the amont of IR is displayed here (NOT 0).
    Can you please help to undersatnd of this behaviour.
    Thanks in Advance.

    Hello Kumar,
    When a Po is created two currencies come in to picture
    One- The document currency, which is generally the vendor currency also or the currency in which the items are ordered.
    Two- The local currency or the Currency of the company code or the currency in which account postings take place.
    The GR/Ir clearing value in local currency is the  value that is viewed in the company code currency. This is dealt in the background and should not cause any issues at all

  • Report showing GL Accounts with  document posted in currency other than local currency

    We need a report that shows all the GL Accounts that had a document posted in currency other than local currency during the month. The purpose of such a report is that we should not miss any Foreign Currency Gain or Loss at the end of the month.
    Is there such a report already in Standard SAP ? Please let me know. Points guaranteed.

    Hi Ajay sir,
    It's never be a bad idea. But I think Rajeev might be looking for a stright report than work around, which is not available.
    Regards...
    Jose

  • Parallel currency 2nd local currency issue

    Good morning everyone,
    I am handling and issue wherein I am finding a difference in the FS10N GL line items.
    Background-
    1. Doc currency, 1st local currency and 2nd Local currency are the same i.e USD.
    2. When I see any GL account in FS10N I dont see any issues but for the GR/IR GLs.
    It was seen when F.19 was run while analysing GR/IR clearing accounts.
    I have 3 GLs that I am investifgating-
    GR/IR exp offset oth- P& L type
    GR/IR -analysis adj - Other  -B/S type
    Vendor control -Other - P& L type
    All the above mentioned are GR/IR relevant accounts.
    Need help On?-  Inspite of the Doc currency, 1st local and 2nd local currency being USD; the 2nd local currency shows a different value for some line items.
    Although Doc and 1st local currency are always same.
    Please assist.
    Thanks & regards
    Rajdilip
    9920845568

    Hi Madhu,
    I did not yet close the Defect but had to raise a query with SAP about the same.
    I do not really know the symptoms of your issue yet.
    What I have done is -I got the Business run F.13 for all old uncleared stock for all previous years that do not make sense to be still available uncleared in the system.
    Then get the open items identified by the Business so that we can decide if we can clear the unclearable open items that we encounter after running F.13 and use MR11 this time but with careful selection and approval.
    Once the available open items are in manageable numbers the performance of F.19 will increase.
    Also, you may think about implementing 2 notes after checking if they are already there in your system via transaction SNOTE-
    1058971 and 1233775.
    If you still have queries upon this, do let me know and I shall try to cater better understanding upon the same.
    Thanks & regards
    Dilip Raja

  • VAT  FX  and local currency  for UK

    Sales invoices that are not in the local currency still need to record the VAT amount in local currency, and this amount needs to appear in the VAT report. This is currently an issue with the UK VAT authorities.Can some one give me lead about this FX issue of Europe VAT please ?
    Thanks in advance
    Satya

    What is the group currency and company code currency.
    If the Company Code currency is GBP - all Finance documents will show the GBP amount, based on the values in the currency tables.

  • Data collection: Conversion exit and Input Conversion of Local Currency

    Hi,
    I'm collecting transaction data from BI where the local currency for one company has no decimal places.
    Therefore if I collect the data with no conversion, the value is multiplied by 100 in BCS .
    has anyone used the Conversion Exit or Input Conversion options?
    - any feedback, tips or useful documentation/links you can point me to?
    All help much appreciated.
    TheScotsman

    Hi TheScotsman,
    I'm almost sure that the reason of this behaviour but the special treatment of some specific currencies (see the OSS note 153707). Just check if you have the currency in the TCURX table.
    If yes, then please go through the links:
    Re: Local Currency COP, KRW values wrong in report
    (I described symptoms)
    Re: Currency conversion cube to report
    (see the document in the link)
    Edited by: Eugene Khusainov on Sep 8, 2008 4:20 PM

Maybe you are looking for

  • Vendor payment through APP with other than my bank currency

    Hi I have one question: I have to make payment in USD to vendor, but my bank currency is EUR. How to do it from Automated Payment Program. Pls. provide with configuration in APP + Vendor Master also. Regards, Vadiraj

  • 60w power adapter

    hello, i have the new 2010 macbook pro that uses the new (macbook air style) 60W magsafe power adapter. i also have a 1st gen macbook that uses a older style power adapter. and i usually have the adapters plugged in all the time one in my office and

  • TS2289 I updated iMovie and now why isn't there any audio when I import movies from my Sony camera?

    I updated iMovie and now why isn't there any audio when I import movies from my Sony camera?

  • Insert Greek Math Symbol

    Created JSP BC4J application using JDeveloper 3.2.3. One of the functions is to interpret the tilde and overcaret keyboard characters as Greek Math Symbols when using the insert and edit JSP pages, then saving them to the 8i database. The problem I a

  • Can't Open Downloaded CS6 Design & Web Premium Trial

    The above-listed download, from http://www.adobe.com/cfusion/tdrc/index.cfm?product=designweb_premium, yields a file DesignWebPremium_CS6_LS16.7z.adadownload.  There is no way to open this file.  Please provide a direct download; I cannot locate one